WSL2-Linux-Kernel/arch/mips/rb532/gpio.c

208 строки
5.3 KiB
C
Исходник Обычный вид История

/*
* Miscellaneous functions for IDT EB434 board
*
* Copyright 2004 IDT Inc. (rischelp@idt.com)
* Copyright 2006 Phil Sutter <n0-1@freewrt.org>
* Copyright 2007 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/gpio/driver.h>
#include <asm/mach-rc32434/rb.h>
#include <asm/mach-rc32434/gpio.h>
struct rb532_gpio_chip {
struct gpio_chip chip;
void __iomem *regbase;
};
static struct resource rb532_gpio_reg0_res[] = {
{
.name = "gpio_reg0",
.start = REGBASE + GPIOBASE,
.end = REGBASE + GPIOBASE + sizeof(struct rb532_gpio_reg) - 1,
.flags = IORESOURCE_MEM,
}
};
/* rb532_set_bit - sanely set a bit
*
* bitval: new value for the bit
* offset: bit index in the 4 byte address range
* ioaddr: 4 byte aligned address being altered
*/
static inline void rb532_set_bit(unsigned bitval,
unsigned offset, void __iomem *ioaddr)
{
unsigned long flags;
u32 val;
local_irq_save(flags);
val = readl(ioaddr);
val &= ~(!bitval << offset); /* unset bit if bitval == 0 */
val |= (!!bitval << offset); /* set bit if bitval == 1 */
writel(val, ioaddr);
local_irq_restore(flags);
}
/* rb532_get_bit - read a bit
*
* returns the boolean state of the bit, which may be > 1
*/
static inline int rb532_get_bit(unsigned offset, void __iomem *ioaddr)
{
return readl(ioaddr) & (1 << offset);
}
/*
* Return GPIO level */
static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
{
struct rb532_gpio_chip *gpch;
gpch = gpiochip_get_data(chip);
return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
}
/*
* Set output GPIO level
*/
static void rb532_gpio_set(struct gpio_chip *chip,
unsigned offset, int value)
{
struct rb532_gpio_chip *gpch;
gpch = gpiochip_get_data(chip);
rb532_set_bit(value, offset, gpch->regbase + GPIOD);
}
/*
* Set GPIO direction to input
*/
static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct rb532_gpio_chip *gpch;
gpch = gpiochip_get_data(chip);
/* disable alternate function in case it's set */
rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
rb532_set_bit(0, offset, gpch->regbase + GPIOCFG);
return 0;
}
/*
* Set GPIO direction to output
*/
static int rb532_gpio_direction_output(struct gpio_chip *chip,
unsigned offset, int value)
{
struct rb532_gpio_chip *gpch;
gpch = gpiochip_get_data(chip);
/* disable alternate function in case it's set */
rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
/* set the initial output value */
rb532_set_bit(value, offset, gpch->regbase + GPIOD);
rb532_set_bit(1, offset, gpch->regbase + GPIOCFG);
return 0;
}
MIPS: Remove all the uses of custom gpio.h Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-02 19:30:11 +03:00
static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
return 8 + 4 * 32 + gpio;
}
static struct rb532_gpio_chip rb532_gpio_chip[] = {
[0] = {
.chip = {
.label = "gpio0",
.direction_input = rb532_gpio_direction_input,
.direction_output = rb532_gpio_direction_output,
.get = rb532_gpio_get,
.set = rb532_gpio_set,
MIPS: Remove all the uses of custom gpio.h Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-02 19:30:11 +03:00
.to_irq = rb532_gpio_to_irq,
.base = 0,
.ngpio = 32,
},
},
};
/*
* Set GPIO interrupt level
*/
void rb532_gpio_set_ilevel(int bit, unsigned gpio)
{
rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOILEVEL);
}
EXPORT_SYMBOL(rb532_gpio_set_ilevel);
/*
* Set GPIO interrupt status
*/
void rb532_gpio_set_istat(int bit, unsigned gpio)
{
rb532_set_bit(bit, gpio, rb532_gpio_chip->regbase + GPIOISTAT);
}
EXPORT_SYMBOL(rb532_gpio_set_istat);
/*
* Configure GPIO alternate function
*/
void rb532_gpio_set_func(unsigned gpio)
{
rb532_set_bit(1, gpio, rb532_gpio_chip->regbase + GPIOFUNC);
}
EXPORT_SYMBOL(rb532_gpio_set_func);
int __init rb532_gpio_init(void)
{
struct resource *r;
r = rb532_gpio_reg0_res;
rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r));
if (!rb532_gpio_chip->regbase) {
printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
return -ENXIO;
}
/* Register our GPIO chip */
gpiochip_add_data(&rb532_gpio_chip->chip, rb532_gpio_chip);
return 0;
}
arch_initcall(rb532_gpio_init);