microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/fpga/Kconfig

208 строки
6.5 KiB
Plaintext
Исходник Обычный вид История

add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 18:36:28 +03:00
#
# FPGA framework configuration
#
Make FPGA a menuconfig to ease disabling it all No need to get into the submenu to disable all FPGA-related config entries Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 18:36:26 +03:00
menuconfig FPGA
add FPGA manager core API to support programming FPGA's. The following functions are exported as GPL: * fpga_mgr_buf_load Load fpga from image in buffer * fpga_mgr_firmware_load Request firmware and load it to the FPGA. * fpga_mgr_register * fpga_mgr_unregister FPGA device drivers can be added by calling fpga_mgr_register() to register a set of fpga_manager_ops to do device specific stuff. * of_fpga_mgr_get * fpga_mgr_put Get/put a reference to a fpga manager. The following sysfs files are created: * /sys/class/fpga_manager/<fpga>/name Name of low level driver. * /sys/class/fpga_manager/<fpga>/state State of fpga manager Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 18:36:28 +03:00
tristate "FPGA Configuration Framework"
help
Say Y here if you want support for configuring FPGAs from the
kernel. The FPGA framework adds a FPGA manager class and FPGA
manager drivers.
fpga manager: add driver for socfpga fpga manager Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 18:36:29 +03:00
if FPGA
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_SOCFPGA || COMPILE_TEST
fpga: fpga-region: device tree control for FPGA FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:29 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
FPGA manager driver support for Altera SOCFPGA.
fpga: region: move device tree support to of-fpga-region.c Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:25 +03:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_SOCFPGA_A10
tristate "Altera SoCFPGA Arria10"
depends on ARCH_SOCFPGA || COMPILE_TEST
select REGMAP_MMIO
fpga: region: move device tree support to of-fpga-region.c Create of-fpga-region.c and move the following functions without modification from fpga-region.c. * of_fpga_region_find * of_fpga_region_get_mgr * of_fpga_region_get_bridges * child_regions_with_firmware * of_fpga_region_parse_ov * of_fpga_region_notify_pre_apply * of_fpga_region_notify_post_remove * of_fpga_region_notify * of_fpga_region_probe * of_fpga_region_remove Create two new functions with some code from fpga_region_init/exit. * of_fpga_region_init * of_fpga_region_exit Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:25 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
FPGA manager driver support for Altera Arria10 SoCFPGA.
fpga: fpga-region: device tree control for FPGA FPGA Regions support programming FPGA under control of the Device Tree. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:29 +03:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config ALTERA_PR_IP_CORE
tristate "Altera Partial Reconfiguration IP Core"
help
Core driver support for Altera Partial Reconfiguration IP component
fpga: Add support for Lattice iCE40 FPGAs This patch adds support to the FPGA manager for configuring the SRAM of iCE40LM, iCE40LP, iCE40HX, iCE40 Ultra, iCE40 UltraLite and iCE40 UltraPlus devices, through slave SPI. Signed-off-by: Joel Holdsworth <joel@airwebreathe.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-28 01:14:26 +03:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config ALTERA_PR_IP_CORE_PLAT
tristate "Platform support of Altera Partial Reconfiguration IP Core"
depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM
fpga manager: Add Altera CvP driver Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 18:36:35 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
Platform driver support for Altera Partial Reconfiguration IP
component
fpga manager: Add Altera CvP driver Add FPGA manager driver for loading Arria-V/Cyclone-V/Stratix-V and Arria-10 FPGAs via CvP. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 18:36:35 +03:00
fpga manager: Add altera-ps-spi driver for Altera FPGAs altera-ps-spi loads FPGA firmware over SPI, using the "passive serial" interface on Altera Arria 10, Cyclone V or Stratix V FPGAs. This is one of the simpler ways to set up an FPGA at runtime. The signal interface is close to unidirectional SPI with lsb first. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-14 18:36:29 +03:00
config FPGA_MGR_ALTERA_PS_SPI
tristate "Altera FPGA Passive Serial over SPI"
depends on SPI
help
FPGA manager driver support for Altera Arria/Cyclone/Stratix
using the passive serial interface over SPI.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_ALTERA_CVP
tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager"
depends on PCI
fpga-manager: Add Socfpga Arria10 support Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:32 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V
and Arria 10 Altera FPGAs using the CvP interface over PCIe.
fpga-manager: Add Socfpga Arria10 support Add low level driver to support reprogramming FPGAs for Altera SoCFPGA Arria10. Signed-off-by: Alan Tull <atull@opensource.altera.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:32 +03:00
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
depends on ARCH_ZYNQ || COMPILE_TEST
FPGA: Add TS-7300 FPGA manager Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-28 01:14:22 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
FPGA manager driver support for Xilinx Zynq FPGAs.
FPGA: Add TS-7300 FPGA manager Add support for loading bitstreams on the Altera Cyclone II FPGA populated on the TS-7300 board. This is done through the configuration and data registers offered through a memory interface between the EP93xx SoC and the FPGA via an intermediate CPLD device. The EP93xx SoC on the TS-7300 does not have direct means of configuring the on-board FPGA other than by using the special memory mapped interface to the CPLD. No other entity on the system can control the FPGA bitstream. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-28 01:14:22 +03:00
fpga: add intel stratix10 soc fpga manager driver Add driver for reconfiguring Intel Stratix10 SoC FPGA devices. This driver communicates through the Intel service layer driver which does communication with privileged hardware (that does the FPGA programming) through a secure mailbox. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 21:14:04 +03:00
config FPGA_MGR_STRATIX10_SOC
tristate "Intel Stratix10 SoC FPGA Manager"
depends on (ARCH_STRATIX10 && INTEL_STRATIX10_SERVICE)
help
FPGA manager driver support for the Intel Stratix10 SoC.
fpga manager: Add Xilinx slave serial SPI driver The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 03:34:26 +03:00
config FPGA_MGR_XILINX_SPI
tristate "Xilinx Configuration over Slave Serial (SPI)"
depends on SPI
help
FPGA manager driver support for Xilinx FPGA configuration
over slave serial interface.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_ICE40_SPI
tristate "Lattice iCE40 SPI"
depends on OF && SPI
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 01:42:30 +03:00
help
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
fpga: lattice machxo2: Add Lattice MachXO2 support This patch adds support to the FPGA manager for programming MachXO2 device’s internal flash memory, via slave SPI. Signed-off-by: Paolo Pisati <p.pisati@gmail.com> [atull@kernel.org: use existing FPGA mgr API] Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-17 06:43:36 +03:00
config FPGA_MGR_MACHXO2_SPI
tristate "Lattice MachXO2 SPI"
depends on SPI
help
FPGA manager driver support for Lattice MachXO2 configuration
over slave SPI interface.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_MGR_TS73XX
tristate "Technologic Systems TS-73xx SBC FPGA Manager"
depends on ARCH_EP93XX && MACH_TS72XX
help
FPGA manager driver support for the Altera Cyclone II FPGA
present on the TS-73xx SBC boards.
fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 This commit adds FPGA Manager support for the Xilinx Zynq chip. The code borrows some from the xdevcfg driver in Xilinx' vendor tree. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 01:42:30 +03:00
fpga: add fpga bridge framework This framework adds API functions for enabling/ disabling FPGA bridges under kernel control. This allows the Linux kernel to disable FPGA bridges during FPGA reprogramming and to enable FPGA bridges when FPGA reprogramming is done. This framework is be manufacturer-agnostic, allowing it to be used in interfaces that use the FPGA Manager Framework to reprogram FPGA's. The functions are: * of_fpga_bridge_get * fpga_bridge_put Get/put an exclusive reference to a FPGA bridge. * fpga_bridge_enable * fpga_bridge_disable Enable/Disable traffic through a bridge. * fpga_bridge_register * fpga_bridge_unregister Register/unregister a device-specific low level FPGA Bridge driver. Get an exclusive reference to a bridge and add it to a list: * fpga_bridge_get_to_list To enable/disable/put a set of bridges that are on a list: * fpga_bridges_enable * fpga_bridges_disable * fpga_bridges_put Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:28 +03:00
config FPGA_BRIDGE
tristate "FPGA Bridge Framework"
help
Say Y here if you want to support bridges connected between host
processors and FPGAs or between FPGAs.
ARM: socfpga: fpga bridge driver support Supports Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Allows enabling/disabling the bridges through the FPGA Bridge Framework API functions. The fpga2sdram driver only supports enabling and disabling of the ports that been configured early on. This is due to a hardware limitation where the read, write, and command ports on the fpga2sdram bridge can only be reconfigured while there are no transactions to the sdram, i.e. when running out of OCRAM before the kernel boots. Device tree property 'init-val' configures the driver to enable or disable the bridge during probe. If the property does not exist, the driver will leave the bridge in its current state. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:30 +03:00
config SOCFPGA_FPGA_BRIDGE
tristate "Altera SoCFPGA FPGA Bridges"
depends on ARCH_SOCFPGA && FPGA_BRIDGE
help
Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
devices.
fpga: add altera freeze bridge support Add a low level driver for Altera Freeze Bridges to the FPGA Bridge framework. A freeze bridge is a bridge that exists in the FPGA fabric to isolate one region of the FPGA from the busses while that one region is being reprogrammed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-01 22:14:31 +03:00
config ALTERA_FREEZE_BRIDGE
tristate "Altera FPGA Freeze Bridge"
depends on ARCH_SOCFPGA && FPGA_BRIDGE
help
Say Y to enable drivers for Altera FPGA Freeze bridges. A
freeze bridge is a bridge that exists in the FPGA fabric to
isolate one region of the FPGA from the busses while that
region is being reprogrammed.
fpga: Add support for Xilinx LogiCORE PR Decoupler This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-24 18:33:21 +03:00
config XILINX_PR_DECOUPLER
tristate "Xilinx LogiCORE PR Decoupler"
depends on FPGA_BRIDGE
depends on HAS_IOMEM
help
Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
The PR Decoupler exists in the FPGA fabric to isolate one
region of the FPGA from the busses while that region is
being reprogrammed during partial reconfig.
fpga: clean up fpga Kconfig The fpga menuconfig has gotten messy. The bridges and managers are mixed together. * Separate the bridges and things dependent on CONFIG_FPGA_BRIDGE from the managers. * Group the managers by vendor in order that they were added to the kernel. The following is what the menuconfig ends up looking like more or less (platform dependencies are hiding some of these on any given platform). --- FPGA Configuration Framework <*> Altera SOCFPGA FPGA Manager <*> Altera SoCFPGA Arria10 <*> Altera Partial Reconfiguration IP Core <*> Platform support of Altera Partial Reconfiguration IP Core <*> Altera FPGA Passive Serial over SPI <*> Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager <*> Xilinx Zynq FPGA <*> Xilinx Configuration over Slave Serial (SPI) <*> Lattice iCE40 SPI <*> Technologic Systems TS-73xx SBC FPGA Manager <*> FPGA Bridge Framework <*> Altera SoCFPGA FPGA Bridges <*> Altera FPGA Freeze Bridge <*> Xilinx LogiCORE PR Decoupler <*> FPGA Region <*> FPGA Region Device Tree Overlay Support Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15 23:20:27 +03:00
config FPGA_REGION
tristate "FPGA Region"
depends on FPGA_BRIDGE
help
FPGA Region common code. A FPGA Region controls a FPGA Manager
and the FPGA Bridges associated with either a reconfigurable
region of an FPGA or a whole FPGA.
config OF_FPGA_REGION
tristate "FPGA Region Device Tree Overlay Support"
depends on OF && FPGA_REGION
help
Support for loading FPGA images by applying a Device Tree
overlay.
fpga: add device feature list support Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:13 +03:00
config FPGA_DFL
tristate "FPGA Device Feature List (DFL) support"
select FPGA_BRIDGE
select FPGA_REGION
help
Device Feature List (DFL) defines a feature list structure that
creates a linked list of feature headers within the MMIO space
to provide an extensible way of adding features for FPGA.
Driver can walk through the feature headers to enumerate feature
devices (e.g. FPGA Management Engine, Port and Accelerator
Function Unit) and their private features for target FPGA devices.
Select this option to enable common support for Field-Programmable
Gate Array (FPGA) solutions which implement Device Feature List.
It provides enumeration APIs and feature device infrastructure.
fpga: dfl: add FPGA Management Engine driver basic framework The FPGA Management Engine (FME) provides power, thermal management, performance counters, partial reconfiguration and other functions. For each function, it is packaged into a private feature linked to the FME feature device in the 'Device Feature List'. It's a platform device created by DFL framework. This patch adds the basic framework of FME platform driver. It defines sub feature drivers to handle the different sub features, including init, uinit and ioctl. It also registers the file operations for the device file. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:21 +03:00
config FPGA_DFL_FME
tristate "FPGA DFL FME Driver"
depends on FPGA_DFL
help
The FPGA Management Engine (FME) is a feature device implemented
under Device Feature List (DFL) framework. Select this option to
enable the platform device driver for FME which implements all
FPGA platform level management features. There shall be one FME
per DFL based FPGA device.
fpga: dfl: add fpga manager platform driver for FME This patch adds fpga manager driver for FPGA Management Engine (FME). It implements fpga_manager_ops for FPGA Partial Reconfiguration function. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Kang Luwei <luwei.kang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:25 +03:00
config FPGA_DFL_FME_MGR
tristate "FPGA DFL FME Manager Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Manager driver for FPGA Management Engine.
fpga: dfl: add fpga bridge platform driver for FME This patch adds fpga bridge platform driver for FPGA Management Engine. It implements the enable_set callback for fpga bridge. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:27 +03:00
config FPGA_DFL_FME_BRIDGE
tristate "FPGA DFL FME Bridge Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Bridge driver for FPGA Management Engine.
fpga: dfl: add fpga region platform driver for FME This patch adds fpga region platform driver for FPGA Management Engine. It register an fpga region with given fpga manager / bridge device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:28 +03:00
config FPGA_DFL_FME_REGION
tristate "FPGA DFL FME Region Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Region driver for FPGA Management Engine.
fpga: dfl: add FPGA Accelerated Function Unit driver basic framework On DFL FPGA devices, the Accelerated Function Unit (AFU), can be reprogrammed for different functions. It connects to the FPGA infrastructure (static FPGA region) via a Port. Port CSRs are implemented separately from the AFU CSRs to provide control and status of the Port. Once valid PR bitstream is programmed into the AFU, it allows access to the AFU CSRs in the AFU MMIO space. This patch only implements basic driver framework for AFU, including device file operation framework. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:30 +03:00
config FPGA_DFL_AFU
tristate "FPGA DFL AFU Driver"
depends on FPGA_DFL
help
This is the driver for FPGA Accelerated Function Unit (AFU) which
implements AFU and Port management features. A User AFU connects
to the FPGA infrastructure via a Port. There may be more than one
Port/AFU per DFL based FPGA device.
fpga: add FPGA DFL PCIe device driver This patch implements the basic framework of the driver for FPGA PCIe device which implements the Device Feature List (DFL) in its MMIO space. This driver is verified on Intel(R) PCIe-based FPGA DFL devices, including both integrated (e.g. Intel Server Platform with In-package FPGA) and discrete (e.g. Intel FPGA PCIe Acceleration Cards) solutions. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:19 +03:00
config FPGA_DFL_PCI
tristate "FPGA DFL PCIe Device Driver"
depends on PCI && FPGA_DFL
help
Select this option to enable PCIe driver for PCIe-based
Field-Programmable Gate Array (FPGA) solutions which implement
the Device Feature List (DFL). This driver provides interfaces
for userspace applications to configure, enumerate, open and access
FPGA accelerators on the FPGA DFL devices, enables system level
management functions such as FPGA partial reconfiguration, power
management and virtualization with DFL framework and DFL feature
device drivers.
To compile this as a module, choose M here.
fpga manager: add driver for socfpga fpga manager Add driver to fpga manager framework to allow configuration of FPGA in Altera SoCFPGA parts. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-07 18:36:29 +03:00
endif # FPGA