WSL2-Linux-Kernel/arch/powerpc/platforms/pasemi/setup.c

452 строки
11 KiB
C
Исходник Обычный вид История

/*
* Copyright (C) 2006-2007 PA Semi, Inc
*
* Authors: Kip Walker, PA Semi
* Olof Johansson, PA Semi
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
* Based on arch/powerpc/platforms/maple/setup.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/mpic.h>
#include <asm/smp.h>
#include <asm/time.h>
#include <asm/mmu.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include "pasemi.h"
#if !defined(CONFIG_SMP)
static void smp_send_stop(void) {}
#endif
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
/* Various error status registers, must be pre-mapped at MCE time */
#define MAX_MCE_REGS 32
struct mce_regs {
char *name;
void __iomem *addr;
};
static struct mce_regs mce_regs[MAX_MCE_REGS];
static int num_mce_regs;
static int nmi_virq = NO_IRQ;
static void pas_restart(char *cmd)
{
/* Need to put others cpu in hold loop so they're not sleeping */
smp_send_stop();
udelay(10000);
printk("Restarting...\n");
while (1)
out_le32(reset_reg, 0x6000000);
}
#ifdef CONFIG_SMP
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase;
static void __devinit pas_give_timebase(void)
{
spin_lock(&timebase_lock);
mtspr(SPRN_TBCTL, TBCTL_FREEZE);
isync();
timebase = get_tb();
spin_unlock(&timebase_lock);
while (timebase)
barrier();
mtspr(SPRN_TBCTL, TBCTL_RESTART);
}
static void __devinit pas_take_timebase(void)
{
while (!timebase)
smp_rmb();
spin_lock(&timebase_lock);
set_tb(timebase >> 32, timebase & 0xffffffff);
timebase = 0;
spin_unlock(&timebase_lock);
}
struct smp_ops_t pas_smp_ops = {
.probe = smp_mpic_probe,
.message_pass = smp_mpic_message_pass,
.kick_cpu = smp_generic_kick_cpu,
.setup_cpu = smp_mpic_setup_cpu,
.give_timebase = pas_give_timebase,
.take_timebase = pas_take_timebase,
};
#endif /* CONFIG_SMP */
void __init pas_setup_arch(void)
{
#ifdef CONFIG_SMP
/* Setup SMP callback */
smp_ops = &pas_smp_ops;
#endif
/* Lookup PCI hosts */
pas_pci_init();
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
/* Remap SDC register for doing reset */
/* XXXOJN This should maybe come out of the device tree */
reset_reg = ioremap(0xfc101100, 4);
}
static int __init pas_setup_mce_regs(void)
{
struct pci_dev *dev;
int reg;
if (!machine_is(pasemi))
return -ENODEV;
/* Remap various SoC status registers for use by the MCE handler */
reg = 0;
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL);
while (dev && reg < MAX_MCE_REGS) {
mce_regs[reg].name = kasprintf(GFP_KERNEL,
"mc%d_mcdebug_errsta", reg);
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730);
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev);
reg++;
}
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
if (dev && reg+4 < MAX_MCE_REGS) {
mce_regs[reg].name = "iobdbg_IntStatus1";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438);
reg++;
mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454);
reg++;
mce_regs[reg].name = "iobiom_IntStatus";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10);
reg++;
mce_regs[reg].name = "iobiom_IntDbgReg";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c);
reg++;
}
dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL);
if (dev && reg+2 < MAX_MCE_REGS) {
mce_regs[reg].name = "l2csts_IntStatus";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200);
reg++;
mce_regs[reg].name = "l2csts_Cnt";
mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214);
reg++;
}
num_mce_regs = reg;
return 0;
}
device_initcall(pas_setup_mce_regs);
static __init void pas_init_IRQ(void)
{
struct device_node *np;
struct device_node *root, *mpic_node;
unsigned long openpic_addr;
const unsigned int *opprop;
int naddr, opplen;
int mpic_flags;
const unsigned int *nmiprop;
struct mpic *mpic;
mpic_node = NULL;
for_each_node_by_type(np, "interrupt-controller")
if (of_device_is_compatible(np, "open-pic")) {
mpic_node = np;
break;
}
if (!mpic_node)
for_each_node_by_type(np, "open-pic") {
mpic_node = np;
break;
}
if (!mpic_node) {
printk(KERN_ERR
"Failed to locate the MPIC interrupt controller\n");
return;
}
/* Find address list in /platform-open-pic */
root = of_find_node_by_path("/");
naddr = of_n_addr_cells(root);
opprop = of_get_property(root, "platform-open-pic", &opplen);
if (!opprop) {
printk(KERN_ERR "No platform-open-pic property.\n");
of_node_put(root);
return;
}
openpic_addr = of_read_number(opprop, naddr);
printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
mpic_flags = MPIC_PRIMARY | MPIC_LARGE_VECTORS;
nmiprop = of_get_property(mpic_node, "nmi-source", NULL);
if (nmiprop)
mpic_flags |= MPIC_ENABLE_MCK;
mpic = mpic_alloc(mpic_node, openpic_addr,
mpic_flags, 0, 0, "PASEMI-OPIC");
BUG_ON(!mpic);
mpic_assign_isu(mpic, 0, openpic_addr + 0x10000);
mpic_init(mpic);
/* The NMI/MCK source needs to be prio 15 */
if (nmiprop) {
nmi_virq = irq_create_mapping(NULL, *nmiprop);
mpic_irq_set_priority(nmi_virq, 15);
set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING);
mpic_unmask_irq(nmi_virq);
}
of_node_put(mpic_node);
of_node_put(root);
}
static void __init pas_progress(char *s, unsigned short hex)
{
printk("[%04x] : %s\n", hex, s ? s : "");
}
static int pas_machine_check_handler(struct pt_regs *regs)
{
int cpu = smp_processor_id();
unsigned long srr0, srr1, dsisr;
int dump_slb = 0;
int i;
srr0 = regs->nip;
srr1 = regs->msr;
if (mpic_get_mcirq() == nmi_virq) {
printk(KERN_ERR "NMI delivered\n");
debugger(regs);
mpic_end_irq(nmi_virq);
goto out;
}
dsisr = mfspr(SPRN_DSISR);
printk(KERN_ERR "Machine Check on CPU %d\n", cpu);
printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1);
printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar);
printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER),
mfspr(SPRN_PA6T_MER));
printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER),
mfspr(SPRN_PA6T_DER));
printk(KERN_ERR "Cause:\n");
if (srr1 & 0x200000)
printk(KERN_ERR "Signalled by SDC\n");
if (srr1 & 0x100000) {
printk(KERN_ERR "Load/Store detected error:\n");
if (dsisr & 0x8000)
printk(KERN_ERR "D-cache ECC double-bit error or bus error\n");
if (dsisr & 0x4000)
printk(KERN_ERR "LSU snoop response error\n");
if (dsisr & 0x2000) {
printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n");
dump_slb = 1;
}
if (dsisr & 0x1000)
printk(KERN_ERR "Recoverable Duptags\n");
if (dsisr & 0x800)
printk(KERN_ERR "Recoverable D-cache parity error count overflow\n");
if (dsisr & 0x400)
printk(KERN_ERR "TLB parity error count overflow\n");
}
if (srr1 & 0x80000)
printk(KERN_ERR "Bus Error\n");
if (srr1 & 0x40000) {
printk(KERN_ERR "I-side SLB multiple hit\n");
dump_slb = 1;
}
if (srr1 & 0x20000)
printk(KERN_ERR "I-cache parity error hit\n");
if (num_mce_regs == 0)
printk(KERN_ERR "No MCE registers mapped yet, can't dump\n");
else
printk(KERN_ERR "SoC debug registers:\n");
for (i = 0; i < num_mce_regs; i++)
printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name,
in_le32(mce_regs[i].addr));
if (dump_slb) {
unsigned long e, v;
int i;
printk(KERN_ERR "slb contents:\n");
for (i = 0; i < mmu_slb_size; i++) {
asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i));
asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i));
printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v);
}
}
out:
/* SRR1[62] is from MSR[62] if recoverable, so pass that back */
return !!(srr1 & 0x2);
}
static void __init pas_init_early(void)
{
iommu_init_early_pasemi();
}
#ifdef CONFIG_PCMCIA
static int pcmcia_notify(struct notifier_block *nb, unsigned long action,
void *data)
{
struct device *dev = data;
struct device *parent;
struct pcmcia_device *pdev = to_pcmcia_dev(dev);
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
parent = pdev->socket->dev.parent;
/* We know electra_cf devices will always have of_node set, since
* electra_cf is an of_platform driver.
*/
if (!parent->archdata.of_node)
return 0;
if (!of_device_is_compatible(parent->archdata.of_node, "electra-cf"))
return 0;
/* We use the direct ops for localbus */
dev->archdata.dma_ops = &dma_direct_ops;
return 0;
}
static struct notifier_block pcmcia_notifier = {
.notifier_call = pcmcia_notify,
};
static inline void pasemi_pcmcia_init(void)
{
extern struct bus_type pcmcia_bus_type;
bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier);
}
#else
static inline void pasemi_pcmcia_init(void)
{
}
#endif
static struct of_device_id pasemi_bus_ids[] = {
/* Unfortunately needed for legacy firmwares */
{ .type = "localbus", },
{ .type = "sdc", },
/* These are the proper entries, which newer firmware uses */
{ .compatible = "pasemi,localbus", },
{ .compatible = "pasemi,sdc", },
{},
};
static int __init pasemi_publish_devices(void)
{
if (!machine_is(pasemi))
return 0;
pasemi_pcmcia_init();
/* Publish OF platform devices for SDC and other non-PCI devices */
of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
return 0;
}
device_initcall(pasemi_publish_devices);
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init pas_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (!of_flat_dt_is_compatible(root, "PA6T-1682M") &&
!of_flat_dt_is_compatible(root, "pasemi,pwrficient"))
return 0;
hpte_init_native();
alloc_iobmap_l2();
return 1;
}
define_machine(pasemi) {
.name = "PA Semi PWRficient",
.probe = pas_probe,
.setup_arch = pas_setup_arch,
.init_early = pas_init_early,
.init_IRQ = pas_init_IRQ,
.get_irq = mpic_get_irq,
.restart = pas_restart,
.get_boot_time = pas_get_boot_time,
.calibrate_decr = generic_calibrate_decr,
.progress = pas_progress,
.machine_check_exception = pas_machine_check_handler,
};