WSL2-Linux-Kernel/drivers/spi/spi-dw-pci.c

216 строки
5.0 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, 2014 Intel Corporation.
*/
#include <linux/pci.h>
#include <linux/pm_runtime.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include "spi-dw.h"
#define DRIVER_NAME "dw_spi_pci"
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 16:11:59 +03:00
/* HW info for MRST Clk Control Unit, 32b reg per controller */
#define MRST_SPI_CLK_BASE 100000000 /* 100m */
#define MRST_CLK_SPI_REG 0xff11d86c
#define CLK_SPI_BDIV_OFFSET 0
#define CLK_SPI_BDIV_MASK 0x00000007
#define CLK_SPI_CDIV_OFFSET 9
#define CLK_SPI_CDIV_MASK 0x00000e00
#define CLK_SPI_DISABLE_OFFSET 8
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
struct dw_spi_pci_desc {
int (*setup)(struct dw_spi *);
u16 num_cs;
u16 bus_num;
u32 max_freq;
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static int dw_spi_pci_mid_init(struct dw_spi *dws)
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 16:11:59 +03:00
{
void __iomem *clk_reg;
u32 clk_cdiv;
clk_reg = ioremap(MRST_CLK_SPI_REG, 16);
if (!clk_reg)
return -ENOMEM;
/* Get SPI controller operating freq info */
clk_cdiv = readl(clk_reg + dws->bus_num * sizeof(u32));
clk_cdiv &= CLK_SPI_CDIV_MASK;
clk_cdiv >>= CLK_SPI_CDIV_OFFSET;
dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
iounmap(clk_reg);
dw_spi_dma_setup_mfld(dws);
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 16:11:59 +03:00
return 0;
}
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static int dw_spi_pci_generic_init(struct dw_spi *dws)
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 16:11:59 +03:00
{
dw_spi_dma_setup_generic(dws);
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29 16:11:59 +03:00
return 0;
}
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static struct dw_spi_pci_desc dw_spi_pci_mid_desc_1 = {
.setup = dw_spi_pci_mid_init,
.num_cs = 5,
.bus_num = 0,
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static struct dw_spi_pci_desc dw_spi_pci_mid_desc_2 = {
.setup = dw_spi_pci_mid_init,
.num_cs = 2,
.bus_num = 1,
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static struct dw_spi_pci_desc dw_spi_pci_ehl_desc = {
.setup = dw_spi_pci_generic_init,
.num_cs = 2,
.bus_num = -1,
.max_freq = 100000000,
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static int dw_spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
struct dw_spi_pci_desc *desc = (struct dw_spi_pci_desc *)ent->driver_data;
struct dw_spi *dws;
int pci_bar = 0;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
dws = devm_kzalloc(&pdev->dev, sizeof(*dws), GFP_KERNEL);
if (!dws)
return -ENOMEM;
/* Get basic io resource and map it */
dws->paddr = pci_resource_start(pdev, pci_bar);
pci_set_master(pdev);
ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev));
if (ret)
return ret;
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
dws->regs = pcim_iomap_table(pdev)[pci_bar];
dws->irq = pci_irq_vector(pdev, 0);
/*
* Specific handling for platforms, like dma setup,
* clock rate, FIFO depth.
*/
if (desc) {
dws->num_cs = desc->num_cs;
dws->bus_num = desc->bus_num;
dws->max_freq = desc->max_freq;
if (desc->setup) {
ret = desc->setup(dws);
if (ret)
goto err_free_irq_vectors;
}
} else {
ret = -ENODEV;
goto err_free_irq_vectors;
}
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret)
goto err_free_irq_vectors;
/* PCI hook and SPI hook use the same drv data */
pci_set_drvdata(pdev, dws);
dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
pdev->vendor, pdev->device);
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
err_free_irq_vectors:
pci_free_irq_vectors(pdev);
return ret;
}
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static void dw_spi_pci_remove(struct pci_dev *pdev)
{
struct dw_spi *dws = pci_get_drvdata(pdev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
dw_spi_remove_host(dws);
pci_free_irq_vectors(pdev);
}
#ifdef CONFIG_PM_SLEEP
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static int dw_spi_pci_suspend(struct device *dev)
{
struct dw_spi *dws = dev_get_drvdata(dev);
return dw_spi_suspend_host(dws);
}
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static int dw_spi_pci_resume(struct device *dev)
{
struct dw_spi *dws = dev_get_drvdata(dev);
return dw_spi_resume_host(dws);
}
#endif
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static SIMPLE_DEV_PM_OPS(dw_spi_pci_pm_ops, dw_spi_pci_suspend, dw_spi_pci_resume);
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static const struct pci_device_id dw_spi_pci_ids[] = {
/* Intel MID platform SPI controller 0 */
/*
* The access to the device 8086:0801 is disabled by HW, since it's
* exclusively used by SCU to communicate with MSIC.
*/
/* Intel MID platform SPI controller 1 */
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
{ PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&dw_spi_pci_mid_desc_1},
/* Intel MID platform SPI controller 2 */
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
{ PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&dw_spi_pci_mid_desc_2},
/* Intel Elkhart Lake PSE SPI controllers */
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
{ PCI_VDEVICE(INTEL, 0x4b84), (kernel_ulong_t)&dw_spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b85), (kernel_ulong_t)&dw_spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b86), (kernel_ulong_t)&dw_spi_pci_ehl_desc},
{ PCI_VDEVICE(INTEL, 0x4b87), (kernel_ulong_t)&dw_spi_pci_ehl_desc},
{},
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
MODULE_DEVICE_TABLE(pci, dw_spi_pci_ids);
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
static struct pci_driver dw_spi_pci_driver = {
.name = DRIVER_NAME,
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
.id_table = dw_spi_pci_ids,
.probe = dw_spi_pci_probe,
.remove = dw_spi_pci_remove,
.driver = {
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
.pm = &dw_spi_pci_pm_ops,
},
};
spi: dw: Put the driver entities naming in order Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15 21:19:13 +03:00
module_pci_driver(dw_spi_pci_driver);
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(SPI_DW_CORE);