WSL2-Linux-Kernel/fs/ext4/acl.c

303 строки
6.7 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ext4/acl.c
*
* Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de>
*/
#include <linux/quotaops.h>
#include "ext4_jbd2.h"
#include "ext4.h"
#include "xattr.h"
#include "acl.h"
/*
* Convert from filesystem to in-memory representation.
*/
static struct posix_acl *
ext4_acl_from_disk(const void *value, size_t size)
{
const char *end = (char *)value + size;
int n, count;
struct posix_acl *acl;
if (!value)
return NULL;
if (size < sizeof(ext4_acl_header))
return ERR_PTR(-EINVAL);
if (((ext4_acl_header *)value)->a_version !=
cpu_to_le32(EXT4_ACL_VERSION))
return ERR_PTR(-EINVAL);
value = (char *)value + sizeof(ext4_acl_header);
count = ext4_acl_count(size);
if (count < 0)
return ERR_PTR(-EINVAL);
if (count == 0)
return NULL;
acl = posix_acl_alloc(count, GFP_NOFS);
if (!acl)
return ERR_PTR(-ENOMEM);
for (n = 0; n < count; n++) {
ext4_acl_entry *entry =
(ext4_acl_entry *)value;
if ((char *)value + sizeof(ext4_acl_entry_short) > end)
goto fail;
acl->a_entries[n].e_tag = le16_to_cpu(entry->e_tag);
acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm);
switch (acl->a_entries[n].e_tag) {
case ACL_USER_OBJ:
case ACL_GROUP_OBJ:
case ACL_MASK:
case ACL_OTHER:
value = (char *)value +
sizeof(ext4_acl_entry_short);
break;
case ACL_USER:
value = (char *)value + sizeof(ext4_acl_entry);
if ((char *)value > end)
goto fail;
acl->a_entries[n].e_uid =
make_kuid(&init_user_ns,
le32_to_cpu(entry->e_id));
break;
case ACL_GROUP:
value = (char *)value + sizeof(ext4_acl_entry);
if ((char *)value > end)
goto fail;
acl->a_entries[n].e_gid =
make_kgid(&init_user_ns,
le32_to_cpu(entry->e_id));
break;
default:
goto fail;
}
}
if (value != end)
goto fail;
return acl;
fail:
posix_acl_release(acl);
return ERR_PTR(-EINVAL);
}
/*
* Convert from in-memory to filesystem representation.
*/
static void *
ext4_acl_to_disk(const struct posix_acl *acl, size_t *size)
{
ext4_acl_header *ext_acl;
char *e;
size_t n;
*size = ext4_acl_size(acl->a_count);
ext_acl = kmalloc(sizeof(ext4_acl_header) + acl->a_count *
sizeof(ext4_acl_entry), GFP_NOFS);
if (!ext_acl)
return ERR_PTR(-ENOMEM);
ext_acl->a_version = cpu_to_le32(EXT4_ACL_VERSION);
e = (char *)ext_acl + sizeof(ext4_acl_header);
for (n = 0; n < acl->a_count; n++) {
const struct posix_acl_entry *acl_e = &acl->a_entries[n];
ext4_acl_entry *entry = (ext4_acl_entry *)e;
entry->e_tag = cpu_to_le16(acl_e->e_tag);
entry->e_perm = cpu_to_le16(acl_e->e_perm);
switch (acl_e->e_tag) {
case ACL_USER:
entry->e_id = cpu_to_le32(
from_kuid(&init_user_ns, acl_e->e_uid));
e += sizeof(ext4_acl_entry);
break;
case ACL_GROUP:
entry->e_id = cpu_to_le32(
from_kgid(&init_user_ns, acl_e->e_gid));
e += sizeof(ext4_acl_entry);
break;
case ACL_USER_OBJ:
case ACL_GROUP_OBJ:
case ACL_MASK:
case ACL_OTHER:
e += sizeof(ext4_acl_entry_short);
break;
default:
goto fail;
}
}
return (char *)ext_acl;
fail:
kfree(ext_acl);
return ERR_PTR(-EINVAL);
}
/*
* Inode operation get_posix_acl().
*
* inode->i_mutex: don't care
*/
struct posix_acl *
ext4_get_acl(struct inode *inode, int type)
{
int name_index;
char *value = NULL;
struct posix_acl *acl;
int retval;
switch (type) {
case ACL_TYPE_ACCESS:
name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
break;
case ACL_TYPE_DEFAULT:
name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
break;
default:
BUG();
}
retval = ext4_xattr_get(inode, name_index, "", NULL, 0);
if (retval > 0) {
value = kmalloc(retval, GFP_NOFS);
if (!value)
return ERR_PTR(-ENOMEM);
retval = ext4_xattr_get(inode, name_index, "", value, retval);
}
if (retval > 0)
acl = ext4_acl_from_disk(value, retval);
else if (retval == -ENODATA || retval == -ENOSYS)
acl = NULL;
else
acl = ERR_PTR(retval);
kfree(value);
return acl;
}
/*
* Set the access or default ACL of an inode.
*
* inode->i_mutex: down unless called from ext4_new_inode
*/
static int
__ext4_set_acl(handle_t *handle, struct inode *inode, int type,
struct posix_acl *acl, int xattr_flags)
{
int name_index;
void *value = NULL;
size_t size = 0;
int error;
switch (type) {
case ACL_TYPE_ACCESS:
name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS;
break;
case ACL_TYPE_DEFAULT:
name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT;
if (!S_ISDIR(inode->i_mode))
return acl ? -EACCES : 0;
break;
default:
return -EINVAL;
}
if (acl) {
value = ext4_acl_to_disk(acl, &size);
if (IS_ERR(value))
return (int)PTR_ERR(value);
}
error = ext4_xattr_set_handle(handle, inode, name_index, "",
value, size, xattr_flags);
kfree(value);
if (!error)
set_cached_acl(inode, type, acl);
return error;
}
int
ext4_set_acl(struct user_namespace *mnt_userns, struct inode *inode,
struct posix_acl *acl, int type)
{
handle_t *handle;
int error, credits, retries = 0;
size_t acl_size = acl ? ext4_acl_size(acl->a_count) : 0;
umode_t mode = inode->i_mode;
int update_mode = 0;
error = dquot_initialize(inode);
if (error)
return error;
retry:
error = ext4_xattr_set_credits(inode, acl_size, false /* is_create */,
&credits);
if (error)
return error;
handle = ext4_journal_start(inode, EXT4_HT_XATTR, credits);
if (IS_ERR(handle))
return PTR_ERR(handle);
ext4_fc_start_update(inode);
if ((type == ACL_TYPE_ACCESS) && acl) {
ext4: support idmapped mounts Enable idmapped mounts for ext4. All dedicated helpers we need for this exist. So this basically just means we're passing down the user_namespace argument from the VFS methods to the relevant helpers. Let's create simple example where we idmap an ext4 filesystem: root@f2-vm:~# truncate -s 5G ext4.img root@f2-vm:~# mkfs.ext4 ./ext4.img mke2fs 1.45.5 (07-Jan-2020) Discarding device blocks: done Creating filesystem with 1310720 4k blocks and 327680 inodes Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done root@f2-vm:~# losetup -f --show ./ext4.img /dev/loop0 root@f2-vm:~# mount /dev/loop0 /mnt root@f2-vm:~# ls -al /mnt/ total 24 drwxr-xr-x 3 root root 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 root root 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped1 where we map uid and gid # 0 to uid and gid 1000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/ root@f2-vm:/# ls -al /idmapped1/ total 24 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 . drwxr-xr-x 30 root root 4096 Oct 28 13:22 .. drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found # Let's create an idmapped mount at /idmapped2 where we map uid and gid # 0 to uid and gid 2000 root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/ root@f2-vm:/# ls -al /idmapped2/ total 24 drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found Let's create another example where we idmap the rootfs filesystem without a mapping for uid 0 and gid 0: # Create an idmapped mount of for a full POSIX range of rootfs under # /mnt but without a mapping for uid 0 to reduce attack surface root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/ # Since we don't have a mapping for uid and gid 0 all files owned by # uid and gid 0 should show up as uid and gid 65534: root@f2-vm:/# ls -al /mnt/ total 664 drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 . drwxr-xr-x 31 root root 4096 Oct 28 13:39 .. lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32 lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64 lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32 drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var # Since we do have a mapping for uid and gid 1000 all files owned by # uid and gid 1000 should simply show up as uid and gid 1000: root@f2-vm:/# ls -al /mnt/home/ubuntu/ total 40 drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 . drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 .. -rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history -rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout -rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc -rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile -rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful -rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-ext4@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 16:19:57 +03:00
error = posix_acl_update_mode(mnt_userns, inode, &mode, &acl);
if (error)
goto out_stop;
if (mode != inode->i_mode)
update_mode = 1;
}
error = __ext4_set_acl(handle, inode, type, acl, 0 /* xattr_flags */);
if (!error && update_mode) {
inode->i_mode = mode;
inode->i_ctime = current_time(inode);
error = ext4_mark_inode_dirty(handle, inode);
}
out_stop:
ext4_journal_stop(handle);
ext4_fc_stop_update(inode);
if (error == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
return error;
}
/*
* Initialize the ACLs of a new inode. Called from ext4_new_inode.
*
* dir->i_mutex: down
* inode->i_mutex: up (access to inode is still exclusive)
*/
int
ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir)
{
struct posix_acl *default_acl, *acl;
int error;
error = posix_acl_create(dir, &inode->i_mode, &default_acl, &acl);
if (error)
return error;
if (default_acl) {
error = __ext4_set_acl(handle, inode, ACL_TYPE_DEFAULT,
default_acl, XATTR_CREATE);
posix_acl_release(default_acl);
} else {
inode->i_default_acl = NULL;
}
if (acl) {
if (!error)
error = __ext4_set_acl(handle, inode, ACL_TYPE_ACCESS,
acl, XATTR_CREATE);
posix_acl_release(acl);
} else {
inode->i_acl = NULL;
}
return error;
}