microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/s390/kernel/text_amode31.S

159 строки
3.2 KiB
ArmAsm
Исходник Обычный вид История

s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Code that needs to run below 2 GB.
*
* Copyright IBM Corp. 2019
*/
#include <linux/linkage.h>
#include <asm/errno.h>
#include <asm/sigp.h>
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
.section .amode31.text,"ax"
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/*
* Simplified version of expoline thunk. The normal thunks can not be used here,
* because they might be more than 2 GB away, and not reachable by the relative
* branch. No comdat, exrl, etc. optimizations used here, because it only
* affects a few functions that are not performance-relevant.
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
.macro BR_EX_AMODE31_r14
s390/boot: fix use of expolines in the DMA code The DMA code section of the decompressor must be compiled with expolines if Spectre V2 mitigation has been enabled for the decompressed kernel. This is required because although the decompressor's image contains the DMA code section, it is handed over to the decompressed kernel for use. Because the DMA code is already slow w/o expolines, use expolines always regardless whether the decompressed kernel is using them or not. This simplifies the DMA code by dropping the conditional compilation of expolines. Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-07-16 23:00:22 +03:00
larl %r1,0f
ex 0,0(%r1)
j .
0: br %r14
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
.endm
/*
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
* int _diag14_amode31(unsigned long rx, unsigned long ry1, unsigned long subcode)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
ENTRY(_diag14_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
lgr %r1,%r2
lgr %r2,%r3
lgr %r3,%r4
lhi %r5,-EIO
sam31
diag %r1,%r2,0x14
.Ldiag14_ex:
ipm %r5
srl %r5,28
.Ldiag14_fault:
sam64
lgfr %r2,%r5
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag14_ex, .Ldiag14_fault)
ENDPROC(_diag14_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/*
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
* int _diag210_amode31(struct diag210 *addr)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
ENTRY(_diag210_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
lgr %r1,%r2
lhi %r2,-1
sam31
diag %r1,%r0,0x210
.Ldiag210_ex:
ipm %r2
srl %r2,28
.Ldiag210_fault:
sam64
lgfr %r2,%r2
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag210_ex, .Ldiag210_fault)
ENDPROC(_diag210_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/*
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
* int _diag26c_amode31(void *req, void *resp, enum diag26c_sc subcode)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
ENTRY(_diag26c_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
lghi %r5,-EOPNOTSUPP
sam31
diag %r2,%r4,0x26c
.Ldiag26c_ex:
sam64
lgfr %r2,%r5
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
BR_EX_AMODE31_r14
EX_TABLE_AMODE31(.Ldiag26c_ex, .Ldiag26c_ex)
ENDPROC(_diag26c_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/*
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
* void _diag0c_amode31(struct hypfs_diag0c_entry *entry)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
ENTRY(_diag0c_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
sam31
diag %r2,%r2,0x0c
sam64
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
BR_EX_AMODE31_r14
ENDPROC(_diag0c_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
/*
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
* void _diag308_reset_amode31(void)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
*
* Calls diag 308 subcode 1 and continues execution
*/
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
ENTRY(_diag308_reset_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
larl %r4,.Lctlregs # Save control registers
stctg %c0,%c15,0(%r4)
lg %r2,0(%r4) # Disable lowcore protection
nilh %r2,0xefff
larl %r4,.Lctlreg0
stg %r2,0(%r4)
lctlg %c0,%c0,0(%r4)
larl %r4,.Lfpctl # Floating point control register
stfpc 0(%r4)
larl %r4,.Lprefix # Save prefix register
stpx 0(%r4)
larl %r4,.Lprefix_zero # Set prefix register to 0
spx 0(%r4)
larl %r4,.Lcontinue_psw # Save PSW flags
epsw %r2,%r3
stm %r2,%r3,0(%r4)
s390/diag: make restart_part2 a local label Avoid that the "restart_part2" label, which is in the middle of a function, appears in /proc/kallsyms. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-24 18:21:12 +03:00
larl %r4,.Lrestart_part2 # Setup restart PSW at absolute 0
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
larl %r3,.Lrestart_diag308_psw
og %r4,0(%r3) # Save PSW
lghi %r3,0
sturg %r4,%r3 # Use sturg, because of large pages
lghi %r1,1
lghi %r0,0
diag %r0,%r1,0x308
s390/diag: make restart_part2 a local label Avoid that the "restart_part2" label, which is in the middle of a function, appears in /proc/kallsyms. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-24 18:21:12 +03:00
.Lrestart_part2:
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
lhi %r0,0 # Load r0 with zero
lhi %r1,2 # Use mode 2 = ESAME (dump)
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
sam64 # Switch to 64 bit addressing mode
larl %r4,.Lctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
larl %r4,.Lfpctl # Restore floating point ctl register
lfpc 0(%r4)
larl %r4,.Lprefix # Restore prefix register
spx 0(%r4)
larl %r4,.Lcontinue_psw # Restore PSW flags
s390/boot: make _diag308_reset_dma() position-independent As a preparation for moving the .dma.data section from the decompressor to the decompressed kernel, the .dma.data section must be made relocatable by replacing absolute memory addressing with relative one. This is required in order to be able to relocate the DMA section to a memory address <= 2G as required by the hardware architecture. The DMA section must be relocated in case the decompressed kernel was loaded to an address >= 2G which can occur if KASAN is enabled. By making the whole DMA section position-independent we avoid applying relocations to it whenever it is moved to a different address, which becomes possible as soon as it becomes a part of the decompressed kernel. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-06-15 17:05:09 +03:00
larl %r2,.Lcontinue
stg %r2,8(%r4)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
lpswe 0(%r4)
.Lcontinue:
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
BR_EX_AMODE31_r14
ENDPROC(_diag308_reset_amode31)
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
s390: rename dma section to amode31 The dma section name is confusing, since the code which resides within that section has nothing to do with direct memory access. Instead the limitation is that the code has to run in 31 bit addressing mode, and therefore has to reside below 2GB. So the name was chosen since ZONE_DMA is the same region. To reduce confusion rename the section to amode31, which hopefully describes better what this is about. Note: this will also change vmcoreinfo strings - SDMA=... gets renamed to SAMODE31=... - EDMA=... gets renamed to EAMODE31=... Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-08-04 14:40:31 +03:00
.section .amode31.data,"aw",@progbits
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
.align 8
.Lrestart_diag308_psw:
.long 0x00080000,0x80000000
.align 8
.Lcontinue_psw:
s390/boot: make _diag308_reset_dma() position-independent As a preparation for moving the .dma.data section from the decompressor to the decompressed kernel, the .dma.data section must be made relocatable by replacing absolute memory addressing with relative one. This is required in order to be able to relocate the DMA section to a memory address <= 2G as required by the hardware architecture. The DMA section must be relocated in case the decompressed kernel was loaded to an address >= 2G which can occur if KASAN is enabled. By making the whole DMA section position-independent we avoid applying relocations to it whenever it is moved to a different address, which becomes possible as soon as it becomes a part of the decompressed kernel. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-06-15 17:05:09 +03:00
.quad 0,0
s390/kernel: introduce .dma sections With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-03 23:37:20 +03:00
.align 8
.Lctlreg0:
.quad 0
.Lctlregs:
.rept 16
.quad 0
.endr
.Lfpctl:
.long 0
.Lprefix:
.long 0
.Lprefix_zero:
.long 0