WSL2-Linux-Kernel/drivers/tty/serdev/core.c

844 строки
20 KiB
C
Исходник Обычный вид История

tty: add SPDX identifiers to all remaining files in drivers/tty/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-06 20:11:51 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2017 Linaro Ltd., Rob Herring <robh@kernel.org>
*
* Based on drivers/spmi/spmi.c:
* Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
*/
#include <linux/acpi.h>
#include <linux/errno.h>
#include <linux/idr.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pm_domain.h>
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/serdev.h>
#include <linux/slab.h>
#include <linux/platform_data/x86/apple.h>
static bool is_registered;
static DEFINE_IDA(ctrl_ida);
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int len;
len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
if (len != -ENODEV)
return len;
return of_device_modalias(dev, buf, PAGE_SIZE);
}
static DEVICE_ATTR_RO(modalias);
static struct attribute *serdev_device_attrs[] = {
&dev_attr_modalias.attr,
NULL,
};
ATTRIBUTE_GROUPS(serdev_device);
static int serdev_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
int rc;
/* TODO: platform modalias */
rc = acpi_device_uevent_modalias(dev, env);
if (rc != -ENODEV)
return rc;
return of_device_uevent_modalias(dev, env);
}
static void serdev_device_release(struct device *dev)
{
struct serdev_device *serdev = to_serdev_device(dev);
kfree(serdev);
}
static const struct device_type serdev_device_type = {
.groups = serdev_device_groups,
.uevent = serdev_device_uevent,
.release = serdev_device_release,
};
static bool is_serdev_device(const struct device *dev)
{
return dev->type == &serdev_device_type;
}
static void serdev_ctrl_release(struct device *dev)
{
struct serdev_controller *ctrl = to_serdev_controller(dev);
ida_simple_remove(&ctrl_ida, ctrl->nr);
kfree(ctrl);
}
static const struct device_type serdev_ctrl_type = {
.release = serdev_ctrl_release,
};
static int serdev_device_match(struct device *dev, struct device_driver *drv)
{
if (!is_serdev_device(dev))
return 0;
/* TODO: platform matching */
if (acpi_driver_match_device(dev, drv))
return 1;
return of_driver_match_device(dev, drv);
}
/**
* serdev_device_add() - add a device previously constructed via serdev_device_alloc()
* @serdev: serdev_device to be added
*/
int serdev_device_add(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
struct device *parent = serdev->dev.parent;
int err;
dev_set_name(&serdev->dev, "%s-%d", dev_name(parent), serdev->nr);
/* Only a single slave device is currently supported. */
if (ctrl->serdev) {
dev_err(&serdev->dev, "controller busy\n");
return -EBUSY;
}
ctrl->serdev = serdev;
err = device_add(&serdev->dev);
if (err < 0) {
dev_err(&serdev->dev, "Can't add %s, status %pe\n",
dev_name(&serdev->dev), ERR_PTR(err));
goto err_clear_serdev;
}
dev_dbg(&serdev->dev, "device %s registered\n", dev_name(&serdev->dev));
return 0;
err_clear_serdev:
ctrl->serdev = NULL;
return err;
}
EXPORT_SYMBOL_GPL(serdev_device_add);
/**
* serdev_device_remove(): remove an serdev device
* @serdev: serdev_device to be removed
*/
void serdev_device_remove(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
device_unregister(&serdev->dev);
ctrl->serdev = NULL;
}
EXPORT_SYMBOL_GPL(serdev_device_remove);
int serdev_device_open(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
int ret;
if (!ctrl || !ctrl->ops->open)
return -EINVAL;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
ret = ctrl->ops->open(ctrl);
if (ret)
return ret;
ret = pm_runtime_get_sync(&ctrl->dev);
if (ret < 0) {
pm_runtime_put_noidle(&ctrl->dev);
goto err_close;
}
return 0;
err_close:
if (ctrl->ops->close)
ctrl->ops->close(ctrl);
return ret;
}
EXPORT_SYMBOL_GPL(serdev_device_open);
void serdev_device_close(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->close)
return;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
pm_runtime_put(&ctrl->dev);
ctrl->ops->close(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_close);
static void devm_serdev_device_release(struct device *dev, void *dr)
{
serdev_device_close(*(struct serdev_device **)dr);
}
int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev)
{
struct serdev_device **dr;
int ret;
dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL);
if (!dr)
return -ENOMEM;
ret = serdev_device_open(serdev);
if (ret) {
devres_free(dr);
return ret;
}
*dr = serdev;
devres_add(dev, dr);
return 0;
}
EXPORT_SYMBOL_GPL(devm_serdev_device_open);
void serdev_device_write_wakeup(struct serdev_device *serdev)
{
complete(&serdev->write_comp);
}
EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
/**
* serdev_device_write_buf() - write data asynchronously
* @serdev: serdev device
* @buf: data to be written
* @count: number of bytes to write
*
* Write data to the device asynchronously.
*
* Note that any accepted data has only been buffered by the controller; use
* serdev_device_wait_until_sent() to make sure the controller write buffer
* has actually been emptied.
*
* Return: The number of bytes written (less than count if not enough room in
* the write buffer), or a negative errno on errors.
*/
int serdev_device_write_buf(struct serdev_device *serdev,
const unsigned char *buf, size_t count)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->write_buf)
return -EINVAL;
return ctrl->ops->write_buf(ctrl, buf, count);
}
EXPORT_SYMBOL_GPL(serdev_device_write_buf);
/**
* serdev_device_write() - write data synchronously
* @serdev: serdev device
* @buf: data to be written
* @count: number of bytes to write
* @timeout: timeout in jiffies, or 0 to wait indefinitely
*
* Write data to the device synchronously by repeatedly calling
* serdev_device_write() until the controller has accepted all data (unless
* interrupted by a timeout or a signal).
*
* Note that any accepted data has only been buffered by the controller; use
* serdev_device_wait_until_sent() to make sure the controller write buffer
* has actually been emptied.
*
* Note that this function depends on serdev_device_write_wakeup() being
* called in the serdev driver write_wakeup() callback.
*
* Return: The number of bytes written (less than count if interrupted),
* -ETIMEDOUT or -ERESTARTSYS if interrupted before any bytes were written, or
* a negative errno on errors.
*/
int serdev_device_write(struct serdev_device *serdev,
const unsigned char *buf, size_t count,
long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
int written = 0;
int ret;
if (!ctrl || !ctrl->ops->write_buf || !serdev->ops->write_wakeup)
return -EINVAL;
if (timeout == 0)
timeout = MAX_SCHEDULE_TIMEOUT;
mutex_lock(&serdev->write_lock);
do {
reinit_completion(&serdev->write_comp);
ret = ctrl->ops->write_buf(ctrl, buf, count);
if (ret < 0)
break;
written += ret;
buf += ret;
count -= ret;
if (count == 0)
break;
timeout = wait_for_completion_interruptible_timeout(&serdev->write_comp,
timeout);
} while (timeout > 0);
mutex_unlock(&serdev->write_lock);
if (ret < 0)
return ret;
if (timeout <= 0 && written == 0) {
if (timeout == -ERESTARTSYS)
return -ERESTARTSYS;
else
return -ETIMEDOUT;
}
return written;
}
EXPORT_SYMBOL_GPL(serdev_device_write);
void serdev_device_write_flush(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->write_flush)
return;
ctrl->ops->write_flush(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_write_flush);
int serdev_device_write_room(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->write_room)
return 0;
return serdev->ctrl->ops->write_room(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_write_room);
unsigned int serdev_device_set_baudrate(struct serdev_device *serdev, unsigned int speed)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_baudrate)
return 0;
return ctrl->ops->set_baudrate(ctrl, speed);
}
EXPORT_SYMBOL_GPL(serdev_device_set_baudrate);
void serdev_device_set_flow_control(struct serdev_device *serdev, bool enable)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_flow_control)
return;
ctrl->ops->set_flow_control(ctrl, enable);
}
EXPORT_SYMBOL_GPL(serdev_device_set_flow_control);
int serdev_device_set_parity(struct serdev_device *serdev,
enum serdev_parity parity)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_parity)
return -ENOTSUPP;
return ctrl->ops->set_parity(ctrl, parity);
}
EXPORT_SYMBOL_GPL(serdev_device_set_parity);
void serdev_device_wait_until_sent(struct serdev_device *serdev, long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->wait_until_sent)
return;
ctrl->ops->wait_until_sent(ctrl, timeout);
}
EXPORT_SYMBOL_GPL(serdev_device_wait_until_sent);
int serdev_device_get_tiocm(struct serdev_device *serdev)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->get_tiocm)
return -ENOTSUPP;
return ctrl->ops->get_tiocm(ctrl);
}
EXPORT_SYMBOL_GPL(serdev_device_get_tiocm);
int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
{
struct serdev_controller *ctrl = serdev->ctrl;
if (!ctrl || !ctrl->ops->set_tiocm)
return -ENOTSUPP;
return ctrl->ops->set_tiocm(ctrl, set, clear);
}
EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
static int serdev_drv_probe(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
int ret;
ret = dev_pm_domain_attach(dev, true);
if (ret)
return ret;
ret = sdrv->probe(to_serdev_device(dev));
if (ret)
dev_pm_domain_detach(dev, true);
return ret;
}
static int serdev_drv_remove(struct device *dev)
{
const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
if (sdrv->remove)
sdrv->remove(to_serdev_device(dev));
dev_pm_domain_detach(dev, true);
return 0;
}
static struct bus_type serdev_bus_type = {
.name = "serial",
.match = serdev_device_match,
.probe = serdev_drv_probe,
.remove = serdev_drv_remove,
};
/**
* serdev_device_alloc() - Allocate a new serdev device
* @ctrl: associated controller
*
* Caller is responsible for either calling serdev_device_add() to add the
* newly allocated controller, or calling serdev_device_put() to discard it.
*/
struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
{
struct serdev_device *serdev;
serdev = kzalloc(sizeof(*serdev), GFP_KERNEL);
if (!serdev)
return NULL;
serdev->ctrl = ctrl;
device_initialize(&serdev->dev);
serdev->dev.parent = &ctrl->dev;
serdev->dev.bus = &serdev_bus_type;
serdev->dev.type = &serdev_device_type;
init_completion(&serdev->write_comp);
mutex_init(&serdev->write_lock);
return serdev;
}
EXPORT_SYMBOL_GPL(serdev_device_alloc);
/**
* serdev_controller_alloc() - Allocate a new serdev controller
* @parent: parent device
* @size: size of private data
*
* Caller is responsible for either calling serdev_controller_add() to add the
* newly allocated controller, or calling serdev_controller_put() to discard it.
* The allocated private data region may be accessed via
* serdev_controller_get_drvdata()
*/
struct serdev_controller *serdev_controller_alloc(struct device *parent,
size_t size)
{
struct serdev_controller *ctrl;
int id;
if (WARN_ON(!parent))
return NULL;
ctrl = kzalloc(sizeof(*ctrl) + size, GFP_KERNEL);
if (!ctrl)
return NULL;
id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
dev_err(parent,
"unable to allocate serdev controller identifier.\n");
goto err_free;
}
ctrl->nr = id;
device_initialize(&ctrl->dev);
ctrl->dev.type = &serdev_ctrl_type;
ctrl->dev.bus = &serdev_bus_type;
ctrl->dev.parent = parent;
ctrl->dev.of_node = parent->of_node;
serdev_controller_set_drvdata(ctrl, &ctrl[1]);
dev_set_name(&ctrl->dev, "serial%d", id);
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
pm_runtime_no_callbacks(&ctrl->dev);
pm_suspend_ignore_children(&ctrl->dev, true);
dev_dbg(&ctrl->dev, "allocated controller 0x%p id %d\n", ctrl, id);
return ctrl;
err_free:
kfree(ctrl);
return NULL;
}
EXPORT_SYMBOL_GPL(serdev_controller_alloc);
static int of_serdev_register_devices(struct serdev_controller *ctrl)
{
struct device_node *node;
struct serdev_device *serdev = NULL;
int err;
bool found = false;
for_each_available_child_of_node(ctrl->dev.of_node, node) {
if (!of_get_property(node, "compatible", NULL))
continue;
dev_dbg(&ctrl->dev, "adding child %pOF\n", node);
serdev = serdev_device_alloc(ctrl);
if (!serdev)
continue;
serdev->dev.of_node = node;
err = serdev_device_add(serdev);
if (err) {
dev_err(&serdev->dev,
"failure adding device. status %pe\n",
ERR_PTR(err));
serdev_device_put(serdev);
} else
found = true;
}
if (!found)
return -ENODEV;
return 0;
}
#ifdef CONFIG_ACPI
#define SERDEV_ACPI_MAX_SCAN_DEPTH 32
struct acpi_serdev_lookup {
acpi_handle device_handle;
acpi_handle controller_handle;
int n;
int index;
};
static int acpi_serdev_parse_resource(struct acpi_resource *ares, void *data)
{
struct acpi_serdev_lookup *lookup = data;
struct acpi_resource_uart_serialbus *sb;
acpi_status status;
if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
return 1;
if (ares->data.common_serial_bus.type != ACPI_RESOURCE_SERIAL_TYPE_UART)
return 1;
if (lookup->index != -1 && lookup->n++ != lookup->index)
return 1;
sb = &ares->data.uart_serial_bus;
status = acpi_get_handle(lookup->device_handle,
sb->resource_source.string_ptr,
&lookup->controller_handle);
if (ACPI_FAILURE(status))
return 1;
/*
* NOTE: Ideally, we would also want to retreive other properties here,
* once setting them before opening the device is supported by serdev.
*/
return 1;
}
static int acpi_serdev_do_lookup(struct acpi_device *adev,
struct acpi_serdev_lookup *lookup)
{
struct list_head resource_list;
int ret;
lookup->device_handle = acpi_device_handle(adev);
lookup->controller_handle = NULL;
lookup->n = 0;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list,
acpi_serdev_parse_resource, lookup);
acpi_dev_free_resource_list(&resource_list);
if (ret < 0)
return -EINVAL;
return 0;
}
static int acpi_serdev_check_resources(struct serdev_controller *ctrl,
struct acpi_device *adev)
{
struct acpi_serdev_lookup lookup;
int ret;
if (acpi_bus_get_status(adev) || !adev->status.present)
return -EINVAL;
/* Look for UARTSerialBusV2 resource */
lookup.index = -1; // we only care for the last device
ret = acpi_serdev_do_lookup(adev, &lookup);
if (ret)
return ret;
/*
* Apple machines provide an empty resource template, so on those
* machines just look for immediate children with a "baud" property
* (from the _DSM method) instead.
*/
if (!lookup.controller_handle && x86_apple_machine &&
!acpi_dev_get_property(adev, "baud", ACPI_TYPE_BUFFER, NULL))
acpi_get_parent(adev->handle, &lookup.controller_handle);
/* Make sure controller and ResourceSource handle match */
if (ACPI_HANDLE(ctrl->dev.parent) != lookup.controller_handle)
return -ENODEV;
return 0;
}
static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
struct acpi_device *adev)
{
struct serdev_device *serdev;
int err;
serdev = serdev_device_alloc(ctrl);
if (!serdev) {
dev_err(&ctrl->dev, "failed to allocate serdev device for %s\n",
dev_name(&adev->dev));
return AE_NO_MEMORY;
}
ACPI_COMPANION_SET(&serdev->dev, adev);
acpi_device_set_enumerated(adev);
err = serdev_device_add(serdev);
if (err) {
dev_err(&serdev->dev,
"failure adding ACPI serdev device. status %pe\n",
ERR_PTR(err));
serdev_device_put(serdev);
}
return AE_OK;
}
static const struct acpi_device_id serdev_acpi_devices_blacklist[] = {
{ "INT3511", 0 },
{ "INT3512", 0 },
{ },
};
static acpi_status acpi_serdev_add_device(acpi_handle handle, u32 level,
void *data, void **return_value)
{
struct serdev_controller *ctrl = data;
struct acpi_device *adev;
if (acpi_bus_get_device(handle, &adev))
return AE_OK;
if (acpi_device_enumerated(adev))
return AE_OK;
/* Skip if black listed */
if (!acpi_match_device_ids(adev, serdev_acpi_devices_blacklist))
return AE_OK;
if (acpi_serdev_check_resources(ctrl, adev))
return AE_OK;
return acpi_serdev_register_device(ctrl, adev);
}
static int acpi_serdev_register_devices(struct serdev_controller *ctrl)
{
acpi_status status;
if (!has_acpi_companion(ctrl->dev.parent))
return -ENODEV;
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
SERDEV_ACPI_MAX_SCAN_DEPTH,
acpi_serdev_add_device, NULL, ctrl, NULL);
if (ACPI_FAILURE(status))
dev_warn(&ctrl->dev, "failed to enumerate serdev slaves\n");
if (!ctrl->serdev)
return -ENODEV;
return 0;
}
#else
static inline int acpi_serdev_register_devices(struct serdev_controller *ctrl)
{
return -ENODEV;
}
#endif /* CONFIG_ACPI */
/**
* serdev_controller_add() - Add an serdev controller
* @ctrl: controller to be registered.
*
* Register a controller previously allocated via serdev_controller_alloc() with
* the serdev core.
*/
int serdev_controller_add(struct serdev_controller *ctrl)
{
int ret_of, ret_acpi, ret;
/* Can't register until after driver model init */
if (WARN_ON(!is_registered))
return -EAGAIN;
ret = device_add(&ctrl->dev);
if (ret)
return ret;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
pm_runtime_enable(&ctrl->dev);
ret_of = of_serdev_register_devices(ctrl);
ret_acpi = acpi_serdev_register_devices(ctrl);
if (ret_of && ret_acpi) {
dev_dbg(&ctrl->dev, "no devices registered: of:%pe acpi:%pe\n",
ERR_PTR(ret_of), ERR_PTR(ret_acpi));
ret = -ENODEV;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
goto err_rpm_disable;
}
dev_dbg(&ctrl->dev, "serdev%d registered: dev:%p\n",
ctrl->nr, &ctrl->dev);
return 0;
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
err_rpm_disable:
pm_runtime_disable(&ctrl->dev);
device_del(&ctrl->dev);
return ret;
};
EXPORT_SYMBOL_GPL(serdev_controller_add);
/* Remove a device associated with a controller */
static int serdev_remove_device(struct device *dev, void *data)
{
struct serdev_device *serdev = to_serdev_device(dev);
if (dev->type == &serdev_device_type)
serdev_device_remove(serdev);
return 0;
}
/**
* serdev_controller_remove(): remove an serdev controller
* @ctrl: controller to remove
*
* Remove a serdev controller. Caller is responsible for calling
* serdev_controller_put() to discard the allocated controller.
*/
void serdev_controller_remove(struct serdev_controller *ctrl)
{
if (!ctrl)
return;
device_for_each_child(&ctrl->dev, NULL, serdev_remove_device);
serdev: add controller runtime PM support Add support for controller runtime power management to serdev core. This is needed to allow slave drivers to manage the runtime PM state of the underlying serial controller when its driver, in turn, implements more aggressive runtime power management (e.g. using autosuspend). For some applications, for example, where loss off initial data after a remote-wakeup event is acceptable or where rx is not used at all, aggressive serial controller runtime PM may be used without further involvement of the slave driver. But when this is not the case, the slave driver must be able to indicate when incoming data is expected in order to avoid data loss. To facilitate the common case, where the serial controller power state is active whenever the port is open (which is the case with just about every serial driver), and where data loss is not acceptable and cannot even be prevented by explicit controller runtime power management, an RPM reference is taken in serdev open and put again at close. This reference can later be balanced by any serdev driver which wants and/or can handle aggressive controller runtime PM. Note that the .ignore_children flag is set for the serdev controller to allow the underlying hardware to idle when no I/O is expected, regardless of the slave device RPM state. Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30 13:50:59 +03:00
pm_runtime_disable(&ctrl->dev);
device_del(&ctrl->dev);
}
EXPORT_SYMBOL_GPL(serdev_controller_remove);
/**
* serdev_driver_register() - Register client driver with serdev core
* @sdrv: client driver to be associated with client-device.
* @owner: client driver owner to set.
*
* This API will register the client driver with the serdev framework.
* It is typically called from the driver's module-init function.
*/
int __serdev_device_driver_register(struct serdev_device_driver *sdrv, struct module *owner)
{
sdrv->driver.bus = &serdev_bus_type;
sdrv->driver.owner = owner;
/* force drivers to async probe so I/O is possible in probe */
sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS;
return driver_register(&sdrv->driver);
}
EXPORT_SYMBOL_GPL(__serdev_device_driver_register);
static void __exit serdev_exit(void)
{
bus_unregister(&serdev_bus_type);
ida_destroy(&ctrl_ida);
}
module_exit(serdev_exit);
static int __init serdev_init(void)
{
int ret;
ret = bus_register(&serdev_bus_type);
if (ret)
return ret;
is_registered = true;
return 0;
}
/* Must be before serial drivers register */
postcore_initcall(serdev_init);
MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Serial attached device bus");