microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/input/touchscreen/cyttsp_core.h

147 строки
3.0 KiB
C
Исходник Обычный вид История

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 267 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 94 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 17:12:41 +03:00
/* SPDX-License-Identifier: GPL-2.0-only */
Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31 12:18:00 +04:00
/*
* Header file for:
* Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
* For use with Cypress Txx3xx parts.
* Supported parts include:
* CY8CTST341
* CY8CTMA340
*
* Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
* Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
*
* Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
*/
#ifndef __CYTTSP_CORE_H__
#define __CYTTSP_CORE_H__
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/input/cyttsp.h>
#define CY_NUM_RETRY 16 /* max number of retries for read ops */
struct cyttsp_tch {
__be16 x, y;
u8 z;
} __packed;
/* TrueTouch Standard Product Gen3 interface definition */
struct cyttsp_xydata {
u8 hst_mode;
u8 tt_mode;
u8 tt_stat;
struct cyttsp_tch tch1;
u8 touch12_id;
struct cyttsp_tch tch2;
u8 gest_cnt;
u8 gest_id;
struct cyttsp_tch tch3;
u8 touch34_id;
struct cyttsp_tch tch4;
u8 tt_undef[3];
u8 act_dist;
u8 tt_reserved;
} __packed;
/* TTSP System Information interface definition */
struct cyttsp_sysinfo_data {
u8 hst_mode;
u8 mfg_stat;
Input: cyttsp - fix swapped mfg_stat and mfg_cmd registers The command and status register in the driver were swapped with respect to the order specified in the datasheet (CY8CTMA140). Confirmed with Cypress that the order in the datasheet is correct. Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-06 09:42:51 +04:00
u8 mfg_cmd;
Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31 12:18:00 +04:00
u8 cid[3];
u8 tt_undef1;
u8 uid[8];
u8 bl_verh;
u8 bl_verl;
u8 tts_verh;
u8 tts_verl;
u8 app_idh;
u8 app_idl;
u8 app_verh;
u8 app_verl;
u8 tt_undef[5];
u8 scn_typ;
u8 act_intrvl;
u8 tch_tmout;
u8 lp_intrvl;
};
/* TTSP Bootloader Register Map interface definition */
#define CY_BL_CHKSUM_OK 0x01
struct cyttsp_bootloader_data {
u8 bl_file;
u8 bl_status;
u8 bl_error;
u8 blver_hi;
u8 blver_lo;
u8 bld_blver_hi;
u8 bld_blver_lo;
u8 ttspver_hi;
u8 ttspver_lo;
u8 appid_hi;
u8 appid_lo;
u8 appver_hi;
u8 appver_lo;
u8 cid_0;
u8 cid_1;
u8 cid_2;
};
struct cyttsp;
struct cyttsp_bus_ops {
u16 bustype;
Input: cyttsp4 - use 16bit address for I2C/SPI communication In TSG4, register map is 512bytes long and to access all of it, one bit from address byte is used (which bit to use differs for I2C and SPI); Since common code used for TSG3 and TSG4 for I2C, this parameter wrongly used as u8. TSG3 does not access beyond 255 bytes but TSG4 may. Tested-on:TMA3XX DVB && TMA4XX DVB Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-05 01:02:57 +04:00
int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
Input: cyttsp - I2C driver split into two modules Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-01 05:46:56 +04:00
const void *values);
Input: cyttsp4 - use 16bit address for I2C/SPI communication In TSG4, register map is 512bytes long and to access all of it, one bit from address byte is used (which bit to use differs for I2C and SPI); Since common code used for TSG3 and TSG4 for I2C, this parameter wrongly used as u8. TSG3 does not access beyond 255 bytes but TSG4 may. Tested-on:TMA3XX DVB && TMA4XX DVB Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-05 01:02:57 +04:00
int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
Input: cyttsp - I2C driver split into two modules Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-01 05:46:56 +04:00
void *values);
Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31 12:18:00 +04:00
};
enum cyttsp_state {
CY_IDLE_STATE,
CY_ACTIVE_STATE,
CY_BL_STATE,
};
struct cyttsp {
struct device *dev;
int irq;
struct input_dev *input;
char phys[32];
const struct cyttsp_bus_ops *bus_ops;
struct cyttsp_bootloader_data bl_data;
struct cyttsp_sysinfo_data sysinfo_data;
struct cyttsp_xydata xy_data;
struct completion bl_ready;
enum cyttsp_state state;
bool suspended;
Input: cyttsp - switch to using device properties Drop support for platform data passed via a C-structure and switch to device properties instead, which should make the driver compatible with all platforms: OF, ACPI and static boards. Static boards should use property sets to communicate device parameters to the driver. Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-28 00:55:43 +03:00
struct gpio_desc *reset_gpio;
bool use_hndshk;
u8 act_dist;
u8 act_intrvl;
u8 tch_tmout;
u8 lp_intrvl;
u8 *bl_keys;
Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31 12:18:00 +04:00
u8 xfer_buf[] ____cacheline_aligned;
};
struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
struct device *dev, int irq, size_t xfer_buf_size);
Input: cyttsp4 - use 16bit address for I2C/SPI communication In TSG4, register map is 512bytes long and to access all of it, one bit from address byte is used (which bit to use differs for I2C and SPI); Since common code used for TSG3 and TSG4 for I2C, this parameter wrongly used as u8. TSG3 does not access beyond 255 bytes but TSG4 may. Tested-on:TMA3XX DVB && TMA4XX DVB Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-05 01:02:57 +04:00
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
Input: cyttsp - I2C driver split into two modules Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-01 05:46:56 +04:00
u8 length, const void *values);
Input: cyttsp4 - use 16bit address for I2C/SPI communication In TSG4, register map is 512bytes long and to access all of it, one bit from address byte is used (which bit to use differs for I2C and SPI); Since common code used for TSG3 and TSG4 for I2C, this parameter wrongly used as u8. TSG3 does not access beyond 255 bytes but TSG4 may. Tested-on:TMA3XX DVB && TMA4XX DVB Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-05 01:02:57 +04:00
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
Input: cyttsp - I2C driver split into two modules Existing I2C code is for TrueTouch Gen3 devices TrueTouch Gen4 device is using same protocol, will split driver into two pieces to use common code with both drivers. Read/Write functions parameter list modified, since shared code will be used by two separate drivers and these drivers are not sharing same structs, parameters updated to use common structures. Signed-off-by: Ferruh Yigit <fery@cypress.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-07-01 05:46:56 +04:00
u8 length, void *values);
Input: add Cypress TTSP capacitive multi-touch screen support Cypress TrueTouch(tm) Standard Product controllers are found in a wide range of embedded devices. This driver add support for a variety of TTSP controllers. Since the hardware is capable of tracking identifiable contacts, multi-touch protocol type B (stateful) is used to report contact information. The driver is composed of a core driver that process the data sent by the contacts and a set of bus specific interface modules. This patch adds the base core TTSP driver. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-01-31 12:18:00 +04:00
extern const struct dev_pm_ops cyttsp_pm_ops;
#endif /* __CYTTSP_CORE_H__ */