WSL2-Linux-Kernel/arch/arm/mach-omap2/cm2xxx.c

169 строки
3.9 KiB
C
Исходник Обычный вид История

/*
* OMAP2xxx CM module functions
*
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "cm.h"
#include "cm2xxx.h"
#include "cm-regbits-24xx.h"
/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
#define DPLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP 0x3
/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
#define OMAP2XXX_APLL_AUTOIDLE_DISABLE 0x0
#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP 0x3
static const u8 omap2xxx_cm_idlest_offs[] = {
CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3, OMAP24XX_CM_IDLEST4
};
/*
*
*/
static void _write_clktrctrl(u8 c, s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= ~mask;
v |= c << __ffs(mask);
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
v &= mask;
v >>= __ffs(mask);
return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
/*
* DPLL autoidle control
*/
static void _omap2xxx_set_dpll_autoidle(u8 m)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~OMAP24XX_AUTO_DPLL_MASK;
v |= m << OMAP24XX_AUTO_DPLL_SHIFT;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_dpll_disable_autoidle(void)
{
_omap2xxx_set_dpll_autoidle(OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP);
}
void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
{
_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
}
/*
* APLL autoidle control
*/
static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
{
u32 v;
v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
v &= ~mask;
v |= m << __ffs(mask);
omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
}
void omap2xxx_cm_set_apll54_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_54M_MASK);
}
void omap2xxx_cm_set_apll96_disable_autoidle(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
OMAP24XX_AUTO_96M_MASK);
}
void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
{
_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
OMAP24XX_AUTO_96M_MASK);
}
/*
*
*/
/**
* omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* Wait for the PRCM to indicate that the module identified by
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
u32 mask;
if (!idlest_id || (idlest_id > ARRAY_SIZE(omap2xxx_cm_idlest_offs)))
return -EINVAL;
cm_idlest_reg = omap2xxx_cm_idlest_offs[idlest_id - 1];
mask = 1 << idlest_shift;
ena = mask;
omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) &
mask) == ena), MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
}