WSL2-Linux-Kernel/drivers/acpi/acpica/psparse.c

699 строки
19 KiB
C
Исходник Обычный вид История

/******************************************************************************
*
* Module Name: psparse - Parser top level AML parse routines
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
/*
* Parse the AML and build an operation tree as most interpreters,
* like Perl, do. Parsing is done by hand rather than with a YACC
* generated parser to tightly constrain stack and dynamic memory
* usage. At the same time, parsing is kept flexible and the code
* fairly compact by parsing based on a list of AML opcode
* templates in aml_op_info[]
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "acdispat.h"
#include "amlcode.h"
#include "acinterp.h"
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psparse")
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_opcode_size
*
* PARAMETERS: opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
* DESCRIPTION: Get the size of the current opcode.
*
******************************************************************************/
u32 acpi_ps_get_opcode_size(u32 opcode)
{
/* Extended (2-byte) opcode if > 255 */
if (opcode > 0x00FF) {
return (2);
}
/* Otherwise, just a single byte opcode */
return (1);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_peek_opcode
*
* PARAMETERS: parser_state - A parser state object
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
* RETURN: Next AML opcode
*
* DESCRIPTION: Get next AML opcode (without incrementing AML pointer)
*
******************************************************************************/
u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state)
{
u8 *aml;
u16 opcode;
aml = parser_state->aml;
opcode = (u16) ACPI_GET8(aml);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
if (opcode == AML_EXTENDED_OP_PREFIX) {
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
/* Extended opcode, get the second opcode byte */
aml++;
opcode = (u16) ((opcode << 8) | ACPI_GET8(aml));
}
return (opcode);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
* op - Op to complete
*
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 08:00:00 +04:00
* RETURN: Status
*
* DESCRIPTION: Perform any cleanup at the completion of an Op.
*
******************************************************************************/
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
acpi_status
acpi_ps_complete_this_op(struct acpi_walk_state *walk_state,
union acpi_parse_object *op)
{
union acpi_parse_object *prev;
union acpi_parse_object *next;
const struct acpi_opcode_info *parent_info;
union acpi_parse_object *replacement_op = NULL;
acpi_status status = AE_OK;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
ACPI_FUNCTION_TRACE_PTR(ps_complete_this_op, op);
/* Check for null Op, can happen if AML code is corrupt */
if (!op) {
return_ACPI_STATUS(AE_OK); /* OK for now */
}
acpi_ex_stop_trace_opcode(op, walk_state);
/* Delete this op and the subtree below it if asked to */
if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) !=
ACPI_PARSE_DELETE_TREE)
|| (walk_state->op_info->class == AML_CLASS_ARGUMENT)) {
return_ACPI_STATUS(AE_OK);
}
/* Make sure that we only delete this subtree */
if (op->common.parent) {
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 08:00:00 +04:00
prev = op->common.parent->common.value.arg;
if (!prev) {
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 08:00:00 +04:00
/* Nothing more to do */
goto cleanup;
}
/*
* Check if we need to replace the operator and its subtree
* with a return value op (placeholder op)
*/
parent_info =
acpi_ps_get_opcode_info(op->common.parent->common.
aml_opcode);
switch (parent_info->class) {
case AML_CLASS_CONTROL:
break;
case AML_CLASS_CREATE:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
replacement_op =
ACPICA: Dispatcher: Cleanup union acpi_operand_object's AML address assignments ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4 This patch cleans up the code of assigning the AML address to the union acpi_operand_object. The idea behind this cleanup is: The AML address of the union acpi_operand_object should always be determined at the point where the object is encountered. It should be started from the first byte of the object. For example, the opcode of the object, the name string of the user_term object, or the first byte of the packaged object (where a pkg_length is prefixed). So it's not cleaner to have it assigned here and there in the entire ACPICA source tree. There are some special cases for the internal opcodes, before cleaning up the internal opcodes, we should also determine the rules for the AML addresses of the internal opcodes: 1. INT_NAMEPATH_OP: the address of the first byte for the name_string. 2. INT_METHODCALL_OP: the address of the first byte for the name_string. 3. INT_BYTELIST_OP: the address of the first byte for the byte_data list. 4. INT_EVAL_SUBTREE_OP: the address of the first byte for the Region/Package/Buffer/bank_field/Field arguments. 5. INT_NAMEDFIELD_OP: the address to the name_seg. 6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix. 7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix. 8. INT_CONNECTION_OP: the address to the 0x02 prefix. 9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix. 10.INT_RETURN_VALUE_OP: the address of the replaced operand. 11.computational_data: the address to the Byte/Word/Dword/Qword/string_prefix. Before cleaning up the internal root scope of the aml_walk, turning it into the term_list, we need to remember the aml_start address as the "Aml" attribute for the union acpi_operand_object created by acpi_ps_create_scope_op(). Finally, we can delete some redundant AML address assignment in psloop.c. Link: https://github.com/acpica/acpica/commit/afb52611 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 07:52:24 +03:00
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP,
op->common.aml);
if (!replacement_op) {
status = AE_NO_MEMORY;
}
break;
case AML_CLASS_NAMED_OBJECT:
/*
* These opcodes contain term_arg operands. The current
* op must be replaced by a placeholder return op
*/
if ((op->common.parent->common.aml_opcode ==
AML_REGION_OP)
|| (op->common.parent->common.aml_opcode ==
AML_DATA_REGION_OP)
|| (op->common.parent->common.aml_opcode ==
AML_BUFFER_OP)
|| (op->common.parent->common.aml_opcode ==
AML_PACKAGE_OP)
|| (op->common.parent->common.aml_opcode ==
AML_BANK_FIELD_OP)
|| (op->common.parent->common.aml_opcode ==
AML_VAR_PACKAGE_OP)) {
replacement_op =
ACPICA: Dispatcher: Cleanup union acpi_operand_object's AML address assignments ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4 This patch cleans up the code of assigning the AML address to the union acpi_operand_object. The idea behind this cleanup is: The AML address of the union acpi_operand_object should always be determined at the point where the object is encountered. It should be started from the first byte of the object. For example, the opcode of the object, the name string of the user_term object, or the first byte of the packaged object (where a pkg_length is prefixed). So it's not cleaner to have it assigned here and there in the entire ACPICA source tree. There are some special cases for the internal opcodes, before cleaning up the internal opcodes, we should also determine the rules for the AML addresses of the internal opcodes: 1. INT_NAMEPATH_OP: the address of the first byte for the name_string. 2. INT_METHODCALL_OP: the address of the first byte for the name_string. 3. INT_BYTELIST_OP: the address of the first byte for the byte_data list. 4. INT_EVAL_SUBTREE_OP: the address of the first byte for the Region/Package/Buffer/bank_field/Field arguments. 5. INT_NAMEDFIELD_OP: the address to the name_seg. 6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix. 7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix. 8. INT_CONNECTION_OP: the address to the 0x02 prefix. 9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix. 10.INT_RETURN_VALUE_OP: the address of the replaced operand. 11.computational_data: the address to the Byte/Word/Dword/Qword/string_prefix. Before cleaning up the internal root scope of the aml_walk, turning it into the term_list, we need to remember the aml_start address as the "Aml" attribute for the union acpi_operand_object created by acpi_ps_create_scope_op(). Finally, we can delete some redundant AML address assignment in psloop.c. Link: https://github.com/acpica/acpica/commit/afb52611 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 07:52:24 +03:00
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP,
op->common.aml);
if (!replacement_op) {
status = AE_NO_MEMORY;
}
} else
if ((op->common.parent->common.aml_opcode ==
AML_NAME_OP)
&& (walk_state->pass_number <=
ACPI_IMODE_LOAD_PASS2)) {
if ((op->common.aml_opcode == AML_BUFFER_OP)
|| (op->common.aml_opcode == AML_PACKAGE_OP)
|| (op->common.aml_opcode ==
AML_VAR_PACKAGE_OP)) {
replacement_op =
acpi_ps_alloc_op(op->common.
ACPICA: Dispatcher: Cleanup union acpi_operand_object's AML address assignments ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4 This patch cleans up the code of assigning the AML address to the union acpi_operand_object. The idea behind this cleanup is: The AML address of the union acpi_operand_object should always be determined at the point where the object is encountered. It should be started from the first byte of the object. For example, the opcode of the object, the name string of the user_term object, or the first byte of the packaged object (where a pkg_length is prefixed). So it's not cleaner to have it assigned here and there in the entire ACPICA source tree. There are some special cases for the internal opcodes, before cleaning up the internal opcodes, we should also determine the rules for the AML addresses of the internal opcodes: 1. INT_NAMEPATH_OP: the address of the first byte for the name_string. 2. INT_METHODCALL_OP: the address of the first byte for the name_string. 3. INT_BYTELIST_OP: the address of the first byte for the byte_data list. 4. INT_EVAL_SUBTREE_OP: the address of the first byte for the Region/Package/Buffer/bank_field/Field arguments. 5. INT_NAMEDFIELD_OP: the address to the name_seg. 6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix. 7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix. 8. INT_CONNECTION_OP: the address to the 0x02 prefix. 9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix. 10.INT_RETURN_VALUE_OP: the address of the replaced operand. 11.computational_data: the address to the Byte/Word/Dword/Qword/string_prefix. Before cleaning up the internal root scope of the aml_walk, turning it into the term_list, we need to remember the aml_start address as the "Aml" attribute for the union acpi_operand_object created by acpi_ps_create_scope_op(). Finally, we can delete some redundant AML address assignment in psloop.c. Link: https://github.com/acpica/acpica/commit/afb52611 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 07:52:24 +03:00
aml_opcode,
op->common.aml);
if (!replacement_op) {
status = AE_NO_MEMORY;
} else {
replacement_op->named.data =
op->named.data;
replacement_op->named.length =
op->named.length;
}
}
}
break;
default:
ACPICA 20050526 from Bob Moore <robert.moore@intel.com> Implemented support to execute Type 1 and Type 2 AML opcodes appearing at the module level (not within a control method.) These opcodes are executed exactly once at the time the table is loaded. This type of code was legal up until the release of ACPI 2.0B (2002) and is now supported within ACPI CA in order to provide backwards compatibility with earlier BIOS implementations. This eliminates the "Encountered executable code at module level" warning that was previously generated upon detection of such code. Fixed a problem in the interpreter where an AE_NOT_FOUND exception could inadvertently be generated during the lookup of namespace objects in the second pass parse of ACPI tables and control methods. It appears that this problem could occur during the resolution of forward references to namespace objects. Added the ACPI_MUTEX_DEBUG #ifdef to the acpi_ut_release_mutex function, corresponding to the same the deadlock detection debug code to be compiled out in the normal case, improving mutex performance (and overall subsystem performance) considerably. As suggested by Alexey Starikovskiy. Implemented a handful of miscellaneous fixes for possible memory leaks on error conditions and error handling control paths. These fixes were suggested by FreeBSD and the Coverity Prevent source code analysis tool. Added a check for a null RSDT pointer in acpi_get_firmware_table (tbxfroot.c) to prevent a fault in this error case. Signed-off-by Len Brown <len.brown@intel.com>
2005-05-26 08:00:00 +04:00
replacement_op =
ACPICA: Dispatcher: Cleanup union acpi_operand_object's AML address assignments ACPICA commit afb52611dbe7403551f93504d3798534f5c343f4 This patch cleans up the code of assigning the AML address to the union acpi_operand_object. The idea behind this cleanup is: The AML address of the union acpi_operand_object should always be determined at the point where the object is encountered. It should be started from the first byte of the object. For example, the opcode of the object, the name string of the user_term object, or the first byte of the packaged object (where a pkg_length is prefixed). So it's not cleaner to have it assigned here and there in the entire ACPICA source tree. There are some special cases for the internal opcodes, before cleaning up the internal opcodes, we should also determine the rules for the AML addresses of the internal opcodes: 1. INT_NAMEPATH_OP: the address of the first byte for the name_string. 2. INT_METHODCALL_OP: the address of the first byte for the name_string. 3. INT_BYTELIST_OP: the address of the first byte for the byte_data list. 4. INT_EVAL_SUBTREE_OP: the address of the first byte for the Region/Package/Buffer/bank_field/Field arguments. 5. INT_NAMEDFIELD_OP: the address to the name_seg. 6. INT_RESERVEDFIELD_OP: the address to the 0x00 prefix. 7. INT_ACCESSFIELD_OP: the address to the 0x01 prefix. 8. INT_CONNECTION_OP: the address to the 0x02 prefix. 9: INT_EXTACCESSFIELD_OP: the address to the 0x03 prefix. 10.INT_RETURN_VALUE_OP: the address of the replaced operand. 11.computational_data: the address to the Byte/Word/Dword/Qword/string_prefix. Before cleaning up the internal root scope of the aml_walk, turning it into the term_list, we need to remember the aml_start address as the "Aml" attribute for the union acpi_operand_object created by acpi_ps_create_scope_op(). Finally, we can delete some redundant AML address assignment in psloop.c. Link: https://github.com/acpica/acpica/commit/afb52611 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-23 07:52:24 +03:00
acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP,
op->common.aml);
if (!replacement_op) {
status = AE_NO_MEMORY;
}
}
/* We must unlink this op from the parent tree */
if (prev == op) {
/* This op is the first in the list */
if (replacement_op) {
replacement_op->common.parent =
op->common.parent;
replacement_op->common.value.arg = NULL;
replacement_op->common.node = op->common.node;
op->common.parent->common.value.arg =
replacement_op;
replacement_op->common.next = op->common.next;
} else {
op->common.parent->common.value.arg =
op->common.next;
}
}
/* Search the parent list */
else
while (prev) {
/* Traverse all siblings in the parent's argument list */
next = prev->common.next;
if (next == op) {
if (replacement_op) {
replacement_op->common.parent =
op->common.parent;
replacement_op->common.value.
arg = NULL;
replacement_op->common.node =
op->common.node;
prev->common.next =
replacement_op;
replacement_op->common.next =
op->common.next;
next = NULL;
} else {
prev->common.next =
op->common.next;
next = NULL;
}
}
prev = next;
}
}
cleanup:
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
/* Now we can actually delete the subtree rooted at Op */
acpi_ps_delete_parse_tree(op);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_next_parse_state
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
* PARAMETERS: walk_state - Current state
* op - Current parse op
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
* callback_status - Status from previous operation
*
* RETURN: Status
*
* DESCRIPTION: Update the parser state based upon the return exception from
* the parser callback.
*
******************************************************************************/
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
acpi_status
acpi_ps_next_parse_state(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
acpi_status callback_status)
{
struct acpi_parse_state *parser_state = &walk_state->parser_state;
acpi_status status = AE_CTRL_PENDING;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
ACPI_FUNCTION_TRACE_PTR(ps_next_parse_state, op);
switch (callback_status) {
case AE_CTRL_TERMINATE:
/*
* A control method was terminated via a RETURN statement.
* The walk of this method is complete.
*/
parser_state->aml = parser_state->aml_end;
status = AE_CTRL_TERMINATE;
break;
case AE_CTRL_BREAK:
parser_state->aml = walk_state->aml_last_while;
walk_state->control_state->common.value = FALSE;
status = AE_CTRL_BREAK;
break;
case AE_CTRL_CONTINUE:
parser_state->aml = walk_state->aml_last_while;
status = AE_CTRL_CONTINUE;
break;
case AE_CTRL_PENDING:
parser_state->aml = walk_state->aml_last_while;
break;
#if 0
case AE_CTRL_SKIP:
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
status = AE_OK;
break;
#endif
case AE_CTRL_TRUE:
/*
* Predicate of an IF was true, and we are at the matching ELSE.
* Just close out this package
*/
parser_state->aml = acpi_ps_get_next_package_end(parser_state);
status = AE_CTRL_PENDING;
break;
case AE_CTRL_FALSE:
/*
* Either an IF/WHILE Predicate was false or we encountered a BREAK
* opcode. In both cases, we do not execute the rest of the
* package; We simply close out the parent (finishing the walk of
* this branch of the tree) and continue execution at the parent
* level.
*/
parser_state->aml = parser_state->scope->parse_scope.pkg_end;
/* In the case of a BREAK, just force a predicate (if any) to FALSE */
walk_state->control_state->common.value = FALSE;
status = AE_CTRL_END;
break;
case AE_CTRL_TRANSFER:
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
/* A method call (invocation) -- transfer control */
status = AE_CTRL_TRANSFER;
walk_state->prev_op = op;
walk_state->method_call_op = op;
walk_state->method_call_node =
(op->common.value.arg)->common.node;
/* Will return value (if any) be used by the caller? */
walk_state->return_used =
acpi_ds_is_result_used(op, walk_state);
break;
default:
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
status = callback_status;
if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) {
status = AE_OK;
}
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_aml
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
* PARAMETERS: walk_state - Current state
*
*
* RETURN: Status
*
* DESCRIPTION: Parse raw AML and return a tree of ops
*
******************************************************************************/
acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
{
acpi_status status;
struct acpi_thread_state *thread;
struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list;
struct acpi_walk_state *previous_walk_state;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
ACPI_FUNCTION_TRACE(ps_parse_aml);
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
"Entered with WalkState=%p Aml=%p size=%X\n",
walk_state, walk_state->parser_state.aml,
walk_state->parser_state.aml_size));
if (!walk_state->parser_state.aml) {
return_ACPI_STATUS(AE_NULL_OBJECT);
}
/* Create and initialize a new thread state */
thread = acpi_ut_create_thread_state();
if (!thread) {
if (walk_state->method_desc) {
/* Executing a control method - additional cleanup */
acpi_ds_terminate_control_method(walk_state->
method_desc,
walk_state);
}
ACPI: ACPICA 20060526 Restructured, flattened, and simplified the internal interfaces for namespace object evaluation - resulting in smaller code, less CPU stack use, and fewer interfaces. (With assistance from Mikhail Kouzmich) Fixed a problem with the CopyObject operator where the first parameter was not typed correctly for the parser, interpreter, compiler, and disassembler. Caused various errors and unexpected behavior. Fixed a problem where a ShiftLeft or ShiftRight of more than 64 bits produced incorrect results with some C compilers. Since the behavior of C compilers when the shift value is larger than the datatype width is apparently not well defined, the interpreter now detects this condition and simply returns zero as expected in all such cases. (BZ 395) Fixed problem reports (Valery Podrezov) integrated: - Update String-to-Integer conversion to match ACPI 3.0A spec http://bugzilla.kernel.org/show_bug.cgi?id=5329 Allow interpreter to handle nested method declarations http://bugzilla.kernel.org/show_bug.cgi?id=5361 Fixed problem reports (Fiodor Suietov) integrated: - acpi_terminate() doesn't free debug memory allocation list objects (BZ 355) - After Core Subsystem shutdown, acpi_subsystem_status() returns AE_OK (BZ 356) - acpi_os_unmap_memory() for RSDP can be invoked inconsistently (BZ 357) - Resource Manager should return AE_TYPE for non-device objects (BZ 358) - Incomplete cleanup branch in AcpiNsEvaluateRelative (BZ 359) - Use acpi_os_free() instead of ACPI_FREE in acpi_rs_set_srs_method_data (BZ 360) - Incomplete cleanup branch in acpi_ps_parse_aml (BZ 361) - Incomplete cleanup branch in acpi_ds_delete_walk_state (BZ 362) - acpi_get_table_header returns AE_NO_ACPI_TABLES until DSDT is loaded (BZ 365) - Status of the Global Initialization Handler call not used (BZ 366) - Incorrect object parameter to Global Initialization Handler (BZ 367) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-05-27 00:36:00 +04:00
acpi_ds_delete_walk_state(walk_state);
return_ACPI_STATUS(AE_NO_MEMORY);
}
walk_state->thread = thread;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
/*
* If executing a method, the starting sync_level is this method's
* sync_level
*/
if (walk_state->method_desc) {
walk_state->thread->current_sync_level =
walk_state->method_desc->method.sync_level;
}
acpi_ds_push_walk_state(walk_state, thread);
/*
* This global allows the AML debugger to get a handle to the currently
* executing control method.
*/
acpi_gbl_current_walk_list = thread;
/*
* Execute the walk loop as long as there is a valid Walk State. This
* handles nested control method invocations without recursion.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state));
status = AE_OK;
while (walk_state) {
if (ACPI_SUCCESS(status)) {
/*
* The parse_loop executes AML until the method terminates
* or calls another method.
*/
status = acpi_ps_parse_loop(walk_state);
}
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Completed one call to walk loop, %s State=%p\n",
acpi_format_exception(status), walk_state));
if (status == AE_CTRL_TRANSFER) {
/*
* A method call was detected.
* Transfer control to the called control method
*/
status =
acpi_ds_call_control_method(thread, walk_state,
NULL);
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
if (ACPI_FAILURE(status)) {
status =
acpi_ds_method_error(status, walk_state);
}
/*
* If the transfer to the new method method call worked
*, a new walk state was created -- get it
*/
walk_state = acpi_ds_get_current_walk_state(thread);
continue;
} else if (status == AE_CTRL_TERMINATE) {
status = AE_OK;
} else if ((status != AE_OK) && (walk_state->method_desc)) {
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 21:07:00 +03:00
/* Either the method parse or actual execution failed */
acpi_ex_exit_interpreter();
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-28 00:43:00 +03:00
ACPI_ERROR_METHOD("Method parse/execution failed",
walk_state->method_node, NULL,
status);
acpi_ex_enter_interpreter();
/* Check for possible multi-thread reentrancy problem */
if ((status == AE_ALREADY_EXISTS) &&
(!(walk_state->method_desc->method.info_flags &
ACPI_METHOD_SERIALIZED))) {
/*
* Method is not serialized and tried to create an object
* twice. The probable cause is that the method cannot
* handle reentrancy. Mark as "pending serialized" now, and
* then mark "serialized" when the last thread exits.
*/
walk_state->method_desc->method.info_flags |=
ACPI_METHOD_SERIALIZED_PENDING;
}
}
/* We are done with this walk, move on to the parent if any */
walk_state = acpi_ds_pop_walk_state(thread);
/* Reset the current scope to the beginning of scope stack */
acpi_ds_scope_stack_clear(walk_state);
/*
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 21:07:00 +03:00
* If we just returned from the execution of a control method or if we
* encountered an error during the method parse phase, there's lots of
* cleanup to do
*/
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 21:07:00 +03:00
if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) ==
ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading ACPICA commit 0e24fb67cde08d7df7671d7d7b183490dc79707e The MLC (Module Level Code) is an ACPICA terminology describing the AML code out of any control method, its support is an indication of the interpreter behavior during the table loading. The original implementation of MLC in ACPICA had several issues: 1. Out of any control method, besides of the object creating opcodes, only the code blocks wrapped by "If/Else/While" opcodes were supported. 2. The supported MLC code blocks were executed after loading the table rather than being executed right in place. ============================================================ The demo of this order issue is as follows: Name (OBJ1, 1) If (CND1 == 1) { Name (OBJ2, 2) } Name (OBJ3, 3) The original MLC support created OBJ2 after OBJ3's creation. ============================================================ Other than these limitations, MLC support in ACPICA looks correct. And supporting this should be easy/natural for ACPICA, but enabling of this was blocked by some ACPICA internal and OSPM specific initialization order issues we've fixed recently. The wrong support started from the following false bug fixing commit: Commit: 7f0c826a437157d2b19662977e9cf3b472cf24a6 Subject: ACPICA: Add support for module-level executable AML code Commit: 9a884ab64a4d092b4c3bf24fd9a30f7fbd4591e7 Subject: ACPICA: Add additional module-level code support ... We can confirm Windows interpreter behavior via reverse engineering means. It can be proven that not only If/Else/While wrapped code blocks, all opcodes can be executed at the module level, including operation region accesses. And it can be proven that the MLC should be executed right in place, not in such a deferred way executed after loading the table. And the above facts indeed reflect the spec words around ACPI definition block tables (DSDT/SSDT/...), the entire table and the Scope object is defined by the AML specification in BNF style as: AMLCode := def_block_header term_list def_scope := scope_op pkg_length name_string term_list The bodies of the scope opening terms (AMLCode/Scope) are all term_list, thus the table loading should be no difference than the control method evaluations as the body of the Method is also defined by the AML specification as term_list: def_method := method_op pkg_length name_string method_flags term_list The only difference is: after evaluating control method, created named objects may be freed due to no reference, while named objects created by the table loading should only be freed after unloading the table. So this patch follows the spec and the de-facto standard behavior, enables the new grammar (term_list) for the table loading. By doing so, beyond the fixes to the above issues, we can see additional differences comparing to the old grammar based table loading: 1. Originally, beyond the scope opening terms (AMLCode/Scope), If/Else/While wrapped code blocks under the scope creating terms (Device/power_resource/Processor/thermal_zone) are also supported as deferred MLC, which violates the spec defined grammar where object_list is enforced. With MLC support improved as non-deferred, the interpreter parses such scope creating terms as term_list rather object_list like the scope opening terms. After probing the Windows behavior and proving that it also parses these terms as term_list, we submitted an ECR (Engineering Change Request) to the ASWG (ACPI Specification Working Group) to clarify this. The ECR is titled as "ASL Grammar Clarification for Executable AML Opcodes" and has been accepted by the ASWG. The new grammar will appear in ACPI specification 6.2. 2. Originally, Buffer/Package/operation_region/create_XXXField/bank_field arguments are evaluated in a deferred way after loading the table. With MLC support improved, they are also parsed right in place during the table loading. This is also Windows compliant and the only difference is the removal of the debugging messages implemented before acpi_ds_execute_arguments(), see Link # [1] for the details. A previous commit should have ensured that acpi_check_address_range() won't regress. Note that enabling this feature may cause regressions due to long term Linux ACPI support on top of the wrong grammar. So this patch also prepares a global option to be used to roll back to the old grammar during the period between a regression is reported and the regression is root-cause-fixed. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=117671 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1] Link: https://github.com/acpica/acpica/issues/122 Link: https://bugs.acpica.org/show_bug.cgi?id=963 Link: https://github.com/acpica/acpica/commit/0e24fb67 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Reported-by: Ehsan <dashesy@gmail.com> Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-07 09:06:54 +03:00
ACPI_PARSE_EXECUTE &&
!(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) ||
(ACPI_FAILURE(status))) {
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
acpi_ds_terminate_control_method(walk_state->
method_desc,
walk_state);
}
/* Delete this walk state and all linked control states */
acpi_ps_cleanup_scope(&walk_state->parser_state);
previous_walk_state = walk_state;
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
"ReturnValue=%p, ImplicitValue=%p State=%p\n",
walk_state->return_desc,
walk_state->implicit_return_obj, walk_state));
/* Check if we have restarted a preempted walk */
walk_state = acpi_ds_get_current_walk_state(thread);
if (walk_state) {
if (ACPI_SUCCESS(status)) {
/*
* There is another walk state, restart it.
* If the method return value is not used by the parent,
* The object is deleted
*/
if (!previous_walk_state->return_desc) {
/*
* In slack mode execution, if there is no return value
* we should implicitly return zero (0) as a default value.
*/
if (acpi_gbl_enable_interpreter_slack &&
!previous_walk_state->
implicit_return_obj) {
previous_walk_state->
implicit_return_obj =
acpi_ut_create_integer_object
((u64) 0);
if (!previous_walk_state->
implicit_return_obj) {
return_ACPI_STATUS
(AE_NO_MEMORY);
}
}
/* Restart the calling control method */
status =
acpi_ds_restart_control_method
(walk_state,
previous_walk_state->
implicit_return_obj);
} else {
/*
* We have a valid return value, delete any implicit
* return value.
*/
acpi_ds_clear_implicit_return
(previous_walk_state);
status =
acpi_ds_restart_control_method
(walk_state,
previous_walk_state->return_desc);
}
if (ACPI_SUCCESS(status)) {
walk_state->walk_type |=
ACPI_WALK_METHOD_RESTART;
}
} else {
/* On error, delete any return object or implicit return */
acpi_ut_remove_reference(previous_walk_state->
return_desc);
acpi_ds_clear_implicit_return
(previous_walk_state);
}
}
/*
* Just completed a 1st-level method, save the final internal return
* value (if any)
*/
else if (previous_walk_state->caller_return_desc) {
if (previous_walk_state->implicit_return_obj) {
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
*(previous_walk_state->caller_return_desc) =
previous_walk_state->implicit_return_obj;
} else {
/* NULL if no return value */
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 06:49:35 +04:00
*(previous_walk_state->caller_return_desc) =
previous_walk_state->return_desc;
}
} else {
if (previous_walk_state->return_desc) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference(previous_walk_state->
return_desc);
}
if (previous_walk_state->implicit_return_obj) {
/* Caller doesn't want it, must delete it */
acpi_ut_remove_reference(previous_walk_state->
implicit_return_obj);
}
}
acpi_ds_delete_walk_state(previous_walk_state);
}
/* Normal exit */
acpi_ex_release_all_mutexes(thread);
acpi_ut_delete_generic_state(ACPI_CAST_PTR
(union acpi_generic_state, thread));
acpi_gbl_current_walk_list = prev_walk_list;
return_ACPI_STATUS(status);
}