V4L/DVB (3310): DViCO Dual Digital DVB-T / USB bluebird updates

- Add support for the USB portion of the DViCO Dual Digital board. Patch correct "warm" USB IDs into bluebird firmware before download. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09 18:21:28 -02:00 · 2006-01-09 18:21:28 -02:00 · 0029ee143d
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@ -26,6 +26,8 @@

 #include "cx22702.h"
 #include "lgdt330x.h"
+#include "mt352.h"
+#include "mt352_priv.h"

 /* debug */
 int dvb_usb_cxusb_debug;
@ -157,6 +159,27 @@ static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
 	return 0;
 }

+static int cxusb_dee1601_demod_init(struct dvb_frontend* fe)
+{
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x38 };
+	static u8 reset []         = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
 struct cx22702_config cxusb_cx22702_config = {
 	.demod_address = 0x63,

@ -172,6 +195,12 @@ struct lgdt330x_config cxusb_lgdt330x_config = {
 	.pll_set       = dvb_usb_pll_set_i2c,
 };

+struct mt352_config cxusb_dee1601_config = {
+	.demod_address = 0x0f,
+	.demod_init    = cxusb_dee1601_demod_init,
+	.pll_set       = dvb_usb_pll_set,
+};
+
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_device *d)
 {
@ -193,6 +222,13 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_device *d)
 	return 0;
 }

+static int cxusb_dee1601_tuner_attach(struct dvb_usb_device *d)
+{
+	d->pll_addr = 0x61;
+	d->pll_desc = &dvb_pll_thomson_dtt7579;
+	return 0;
+}
+
 static int cxusb_cx22702_frontend_attach(struct dvb_usb_device *d)
 {
 	u8 b;
@ -220,15 +256,31 @@ static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
 	return -EIO;
 }

+static int cxusb_dee1601_frontend_attach(struct dvb_usb_device *d)
+{
+	if (usb_set_interface(d->udev,0,0) < 0)
+		err("set interface failed");
+
+	cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
+
+	if ((d->fe = mt352_attach(&cxusb_dee1601_config, &d->i2c_adap)) != NULL)
+		return 0;
+
+	return -EIO;
+}
+
 /* DVB USB Driver stuff */
 static struct dvb_usb_properties cxusb_medion_properties;
 static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties;
+static struct dvb_usb_properties cxusb_bluebird_dee1601_properties;

 static int cxusb_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
 	if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 ||
-		dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0) {
+		dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 ||
+		dvb_usb_device_init(intf,&cxusb_bluebird_dee1601_properties,THIS_MODULE,NULL) == 0
+		){
 		return 0;
 	}

@ -239,6 +291,8 @@ static struct usb_device_id cxusb_table [] = {
 		{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
 		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
+		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DEE1601_COLD) },
+		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DEE1601_WARM) },
 		{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@ -318,6 +372,45 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
 	}
 };

+static struct dvb_usb_properties cxusb_bluebird_dee1601_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = CYPRESS_FX2,
+	.firmware         = "dvb-usb-bluebird-01.fw",
+	/* use usb alt setting 0 for EP4 transfer (dvb-t),
+	   use usb alt setting 7 for EP2 transfer (atsc) */
+
+	.size_of_priv     = sizeof(struct cxusb_state),
+
+	.streaming_ctrl   = cxusb_streaming_ctrl,
+	.power_ctrl       = cxusb_power_ctrl,
+	.frontend_attach  = cxusb_dee1601_frontend_attach,
+	.tuner_attach     = cxusb_dee1601_tuner_attach,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+	/* parameter for the MPEG2-data transfer */
+	.urb = {
+		.type = DVB_USB_BULK,
+		.count = 5,
+		.endpoint = 0x04,
+		.u = {
+			.bulk = {
+				.buffersize = 8192,
+			}
+		}
+	},
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "DViCO FusionHDTV DVB-T Dual USB",
+			{ &cxusb_table[3], NULL },
+			{ &cxusb_table[4], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@ -74,6 +74,27 @@ static int usb_cypress_load_firmware(struct usb_device *udev, const struct firmw
 	return ret;
 }

+/*
+ * DViCO bluebird firmware needs the "warm" product ID to be patched into the
+ * firmware file before download.
+ */
+#define BLUEBIRD_01_ID_OFFSET 6638
+static int dvb_usb_patch_dvico_firmware(struct usb_device *udev, const struct firmware *fw)
+{
+	if (fw->size < BLUEBIRD_01_ID_OFFSET + 4)
+		return -EINVAL;
+
+	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
+	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
+		fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1;
+		fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
 int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_properties *props)
 {
 	int ret;
@ -88,6 +109,12 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_properties

 	info("downloading firmware from file '%s'",props->firmware);

+	if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_DVICO) {
+		ret = dvb_usb_patch_dvico_firmware(udev, fw);
+		if (ret != 0)
+			warn("this firmware file not recognised");
+	}
+
 	switch (props->usb_ctrl) {
 		case CYPRESS_AN2135:
 		case CYPRESS_AN2235:
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@ -86,13 +86,15 @@
 #define USB_PID_WINTV_NOVA_T_USB2_COLD		0x9300
 #define USB_PID_WINTV_NOVA_T_USB2_WARM		0x9301
 #define USB_PID_NEBULA_DIGITV				0x0201
-#define USB_PID_DVICO_BLUEBIRD_LGZ201		0xdb00
-#define USB_PID_DVICO_BLUEBIRD_TH7579		0xdb10
 #define USB_PID_DVICO_BLUEBIRD_LGDT			0xd820
-#define USB_PID_DVICO_BLUEBIRD_LGZ201_1		0xdb01
-#define USB_PID_DVICO_BLUEBIRD_TH7579_2		0xdb11
 #define USB_PID_DVICO_BLUEBIRD_LG064F_COLD		0xd500
-#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM		0xd700
+#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM		0xd501
+#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD		0xdb00
+#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM		0xdb01
+#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD		0xdb10
+#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM		0xdb11
+#define USB_PID_DVICO_BLUEBIRD_DEE1601_COLD		0xdb50
+#define USB_PID_DVICO_BLUEBIRD_DEE1601_WARM		0xdb51
 #define USB_PID_MEDION_MD95700				0x0932
 #define USB_PID_KYE_DVB_T_COLD				0x701e
 #define USB_PID_KYE_DVB_T_WARM				0x701f