usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer

The CPPI 4.1 driver polls register to workaround the premature TX
interrupt issue, but it causes audio playback underrun when triggered in
Isoch transfers.

Isoch doesn't do back-to-back transfers, the TX should be done by the
time the next transfer is scheduled. So skip this polling workaround for
Isoch transfer.

Fixes: a655f481d8 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt")
Cc: <stable@vger.kernel.org> #4.1+
Reported-by: Alexandre Bailon <abailon@baylibre.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bin Liu 2017-03-10 14:43:35 -06:00 коммит произвёл Greg Kroah-Hartman
Родитель 3243367b20
Коммит 0090114d33
1 изменённых файлов: 21 добавлений и 2 удалений

Просмотреть файл

@ -238,8 +238,27 @@ static void cppi41_dma_callback(void *private_data,
transferred < cppi41_channel->packet_sz)
cppi41_channel->prog_len = 0;
if (cppi41_channel->is_tx)
empty = musb_is_tx_fifo_empty(hw_ep);
if (cppi41_channel->is_tx) {
u8 type;
if (is_host_active(musb))
type = hw_ep->out_qh->type;
else
type = hw_ep->ep_in.type;
if (type == USB_ENDPOINT_XFER_ISOC)
/*
* Don't use the early-TX-interrupt workaround below
* for Isoch transfter. Since Isoch are periodic
* transfer, by the time the next transfer is
* scheduled, the current one should be done already.
*
* This avoids audio playback underrun issue.
*/
empty = true;
else
empty = musb_is_tx_fifo_empty(hw_ep);
}
if (!cppi41_channel->is_tx || empty) {
cppi41_trans_done(cppi41_channel);