wl1271: Change wl12xx Files Names

All files name prefix removed due to the fact that wl12xx driver supports
wl1271 and wl1273.
Also the definition in Kconfig and header files changed respectively.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>

drivers/net/wireless/wl12xx/Kconfig

@@ -1,56 +1,58 @@
-menuconfig WL12XX
+menuconfig WL12XX_MENU
 	tristate "TI wl12xx driver support"
 	depends on MAC80211 && EXPERIMENTAL
 	---help---
-	  This will enable TI wl12xx driver support. The drivers make
-	  use of the mac80211 stack.
+	  This will enable TI wl12xx driver support for the following chips:
+	  wl1271 and wl1273.
+	  The drivers make use of the mac80211 stack.
 
-config WL1271
-	tristate "TI wl1271 support"
-	depends on WL12XX && GENERIC_HARDIRQS
+config WL12XX
+	tristate "TI wl12xx support"
+	depends on WL12XX_MENU && GENERIC_HARDIRQS
 	depends on INET
 	select FW_LOADER
 	select CRC7
 	---help---
-	  This module adds support for wireless adapters based on the
-	  TI wl1271 chipset.
+	  This module adds support for wireless adapters based on TI wl1271 and
+	  TI wl1273 chipsets. This module does *not* include support for wl1251.
+	  For wl1251 support, use the separate homonymous driver instead.
 
-	  If you choose to build a module, it'll be called wl1271. Say N if
+	  If you choose to build a module, it will be called wl12xx. Say N if
 	  unsure.
 
-config WL1271_HT
-        bool "TI wl1271 802.11 HT support (EXPERIMENTAL)"
-        depends on WL1271 && EXPERIMENTAL
+config WL12XX_HT
+        bool "TI wl12xx 802.11 HT support (EXPERIMENTAL)"
+        depends on WL12XX && EXPERIMENTAL
         default n
         ---help---
-          This will enable 802.11 HT support for TI wl1271 chipset.
+          This will enable 802.11 HT support in the wl12xx module.
 
 	  That configuration is temporary due to the code incomplete and
 	  still in testing process.
 
-config WL1271_SPI
-	tristate "TI wl1271 SPI support"
-	depends on WL1271 && SPI_MASTER
+config WL12XX_SPI
+	tristate "TI wl12xx SPI support"
+	depends on WL12XX && SPI_MASTER
 	---help---
 	  This module adds support for the SPI interface of adapters using
-	  TI wl1271 chipset.  Select this if your platform is using
+	  TI wl12xx chipsets.  Select this if your platform is using
 	  the SPI bus.
 
-	  If you choose to build a module, it'll be called wl1251_spi.
+	  If you choose to build a module, it'll be called wl12xx_spi.
 	  Say N if unsure.
 
-config WL1271_SDIO
-	tristate "TI wl1271 SDIO support"
-	depends on WL1271 && MMC
+config WL12XX_SDIO
+	tristate "TI wl12xx SDIO support"
+	depends on WL12XX && MMC
 	---help---
 	  This module adds support for the SDIO interface of adapters using
-	  TI wl1271 chipset.  Select this if your platform is using
+	  TI wl12xx chipsets.  Select this if your platform is using
 	  the SDIO bus.
 
-	  If you choose to build a module, it'll be called
-	  wl1271_sdio. Say N if unsure.
+	  If you choose to build a module, it'll be called wl12xx_sdio.
+	  Say N if unsure.
 
 config WL12XX_PLATFORM_DATA
 	bool
-	depends on WL1271_SDIO != n || WL1251_SDIO != n
+	depends on WL12XX_SDIO != n || WL1251_SDIO != n
 	default y

drivers/net/wireless/wl12xx/Makefile

@@ -1,12 +1,13 @@
-wl1271-objs		= wl1271_main.o  wl1271_cmd.o wl1271_io.o \
-			  wl1271_event.o wl1271_tx.o  wl1271_rx.o   \
-			  wl1271_ps.o    wl1271_acx.o wl1271_boot.o \
-			  wl1271_init.o  wl1271_debugfs.o wl1271_scan.o
+wl12xx-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+			  boot.o init.o debugfs.o scan.o
 
-wl1271-$(CONFIG_NL80211_TESTMODE)	+= wl1271_testmode.o
-obj-$(CONFIG_WL1271)	+= wl1271.o
-obj-$(CONFIG_WL1271_SPI)	+= wl1271_spi.o
-obj-$(CONFIG_WL1271_SDIO)	+= wl1271_sdio.o
+wl12xx_spi-objs	= spi.o
+wl12xx_sdio-objs	= sdio.o
+
+wl12xx-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
+obj-$(CONFIG_WL12XX)			+= wl12xx.o
+obj-$(CONFIG_WL12XX_SPI)		+= wl12xx_spi.o
+obj-$(CONFIG_WL12XX_SDIO)		+= wl12xx_sdio.o
 
 # small builtin driver bit
 obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o

drivers/net/wireless/wl12xx/acx.c

@@ -21,7 +21,7 @@
  *
  */
 
-#include "wl1271_acx.h"
+#include "acx.h"
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -29,10 +29,10 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
+#include "reg.h"
+#include "ps.h"
 
 int wl1271_acx_wake_up_conditions(struct wl1271 *wl)
 {

drivers/net/wireless/wl12xx/acx.h

@@ -22,11 +22,11 @@
  *
  */
 
-#ifndef __WL1271_ACX_H__
-#define __WL1271_ACX_H__
+#ifndef __ACX_H__
+#define __ACX_H__
 
-#include "wl1271.h"
-#include "wl1271_cmd.h"
+#include "wl12xx.h"
+#include "cmd.h"
 
 /*************************************************************************
 

drivers/net/wireless/wl12xx/boot.c

@@ -24,11 +24,11 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
-#include "wl1271_acx.h"
-#include "wl1271_reg.h"
-#include "wl1271_boot.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
+#include "acx.h"
+#include "reg.h"
+#include "boot.h"
+#include "io.h"
+#include "event.h"
 
 static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
 	[PART_DOWN] = {

drivers/net/wireless/wl12xx/boot.h

@@ -24,7 +24,7 @@
 #ifndef __BOOT_H__
 #define __BOOT_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_boot(struct wl1271 *wl);
 

drivers/net/wireless/wl12xx/cmd.c

@@ -29,13 +29,13 @@
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "reg.h"
+#include "io.h"
+#include "acx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_cmd.h"
-#include "wl1271_event.h"
+#include "cmd.h"
+#include "event.h"
 
 #define WL1271_CMD_FAST_POLL_COUNT       50
 

drivers/net/wireless/wl12xx/cmd.h

@@ -22,10 +22,10 @@
  *
  */
 
-#ifndef __WL1271_CMD_H__
-#define __WL1271_CMD_H__
+#ifndef __CMD_H__
+#define __CMD_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 struct acx_header;
 

drivers/net/wireless/wl12xx/conf.h

@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_CONF_H__
-#define __WL1271_CONF_H__
+#ifndef __CONF_H__
+#define __CONF_H__
 
 enum {
 	CONF_HW_BIT_RATE_1MBPS   = BIT(0),

drivers/net/wireless/wl12xx/debugfs.c

@@ -21,15 +21,15 @@
  *
  */
 
-#include "wl1271_debugfs.h"
+#include "debugfs.h"
 
 #include <linux/skbuff.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
-#include "wl1271_ps.h"
-#include "wl1271_io.h"
+#include "wl12xx.h"
+#include "acx.h"
+#include "ps.h"
+#include "io.h"
 
 /* ms */
 #define WL1271_DEBUGFS_STATS_LIFETIME 1000

drivers/net/wireless/wl12xx/debugfs.h

@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef WL1271_DEBUGFS_H
-#define WL1271_DEBUGFS_H
+#ifndef __DEBUGFS_H__
+#define __DEBUGFS_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_debugfs_init(struct wl1271 *wl);
 void wl1271_debugfs_exit(struct wl1271 *wl);

drivers/net/wireless/wl12xx/event.c

@@ -21,12 +21,12 @@
  *
  */
 
-#include "wl1271.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
-#include "wl1271_ps.h"
-#include "wl1271_scan.h"
+#include "wl12xx.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "ps.h"
+#include "scan.h"
 #include "wl12xx_80211.h"
 
 void wl1271_pspoll_work(struct work_struct *work)

drivers/net/wireless/wl12xx/event.h

@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_EVENT_H__
-#define __WL1271_EVENT_H__
+#ifndef __EVENT_H__
+#define __EVENT_H__
 
 /*
  * Mbox events

drivers/net/wireless/wl12xx/ini.h

@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_INI_H__
-#define __WL1271_INI_H__
+#ifndef __INI_H__
+#define __INI_H__
 
 #define WL1271_INI_MAX_SMART_REFLEX_PARAM 16
 

drivers/net/wireless/wl12xx/init.c

@@ -25,11 +25,11 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include "wl1271_init.h"
+#include "init.h"
 #include "wl12xx_80211.h"
-#include "wl1271_acx.h"
-#include "wl1271_cmd.h"
-#include "wl1271_reg.h"
+#include "acx.h"
+#include "cmd.h"
+#include "reg.h"
 
 static int wl1271_init_hwenc_config(struct wl1271 *wl)
 {

drivers/net/wireless/wl12xx/init.h

@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef __WL1271_INIT_H__
-#define __WL1271_INIT_H__
+#ifndef __INIT_H__
+#define __INIT_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
 int wl1271_init_templates_config(struct wl1271 *wl);

drivers/net/wireless/wl12xx/io.c

@@ -26,9 +26,9 @@
 #include <linux/crc7.h>
 #include <linux/spi/spi.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
 #define OCP_CMD_LOOP  32
 

drivers/net/wireless/wl12xx/io.h

@@ -22,10 +22,10 @@
  *
  */
 
-#ifndef __WL1271_IO_H__
-#define __WL1271_IO_H__
+#ifndef __IO_H__
+#define __IO_H__
 
-#include "wl1271_reg.h"
+#include "reg.h"
 
 #define HW_ACCESS_MEMORY_MAX_RANGE	0x1FFC0
 

drivers/net/wireless/wl12xx/main.c

@@ -31,20 +31,20 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
-#include "wl1271_tx.h"
-#include "wl1271_rx.h"
-#include "wl1271_ps.h"
-#include "wl1271_init.h"
-#include "wl1271_debugfs.h"
-#include "wl1271_cmd.h"
-#include "wl1271_boot.h"
-#include "wl1271_testmode.h"
-#include "wl1271_scan.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+#include "cmd.h"
+#include "boot.h"
+#include "testmode.h"
+#include "scan.h"
 
 #define WL1271_BOOT_RETRIES 3
 
@@ -884,7 +884,7 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
 	}
 
-#ifdef CONFIG_WL1271_HT
+#ifdef CONFIG_WL12XX_HT
 	if (sta &&
 	    sta->ht_cap.ht_supported &&
 	    ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) !=
@@ -2247,8 +2247,8 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
 /* 11n STA capabilities */
 #define HW_RX_HIGHEST_RATE	72
 
-#ifdef CONFIG_WL1271_HT
-#define WL1271_HT_CAP { \
+#ifdef CONFIG_WL12XX_HT
+#define WL12XX_HT_CAP { \
 	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \
 	.ht_supported = true, \
 	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
@@ -2260,7 +2260,7 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
 		}, \
 }
 #else
-#define WL1271_HT_CAP { \
+#define WL12XX_HT_CAP { \
 	.ht_supported = false, \
 }
 #endif
@@ -2271,7 +2271,7 @@ static struct ieee80211_supported_band wl1271_band_2ghz = {
 	.n_channels = ARRAY_SIZE(wl1271_channels),
 	.bitrates = wl1271_rates,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates),
-	.ht_cap	= WL1271_HT_CAP,
+	.ht_cap	= WL12XX_HT_CAP,
 };
 
 /* 5 GHz data rates for WL1273 */
@@ -2386,7 +2386,7 @@ static struct ieee80211_supported_band wl1271_band_5ghz = {
 	.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
 	.bitrates = wl1271_rates_5ghz,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
-	.ht_cap	= WL1271_HT_CAP,
+	.ht_cap	= WL12XX_HT_CAP,
 };
 
 static const u8 *wl1271_band_rate_to_idx[] = {

drivers/net/wireless/wl12xx/ps.c

@@ -21,9 +21,9 @@
  *
  */
 
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
-#include "wl1271_io.h"
+#include "reg.h"
+#include "ps.h"
+#include "io.h"
 
 #define WL1271_WAKEUP_TIMEOUT 500
 

drivers/net/wireless/wl12xx/ps.h

@@ -21,11 +21,11 @@
  *
  */
 
-#ifndef __WL1271_PS_H__
-#define __WL1271_PS_H__
+#ifndef __PS_H__
+#define __PS_H__
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "acx.h"
 
 int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
 		       u32 rates, bool send);

drivers/net/wireless/wl12xx/rx.c

@@ -23,11 +23,11 @@
 
 #include <linux/gfp.h>
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
-#include "wl1271_reg.h"
-#include "wl1271_rx.h"
-#include "wl1271_io.h"
+#include "wl12xx.h"
+#include "acx.h"
+#include "reg.h"
+#include "rx.h"
+#include "io.h"
 
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
 				  u32 drv_rx_counter)
@@ -61,7 +61,7 @@ static void wl1271_rx_status(struct wl1271 *wl,
 
 	status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
 
-#ifdef CONFIG_WL1271_HT
+#ifdef CONFIG_WL12XX_HT
 	/* 11n support */
 	if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
 		status->flag |= RX_FLAG_HT;

drivers/net/wireless/wl12xx/rx.h

@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_RX_H__
-#define __WL1271_RX_H__
+#ifndef __RX_H__
+#define __RX_H__
 
 #include <linux/bitops.h>
 

drivers/net/wireless/wl12xx/scan.c

@@ -23,10 +23,10 @@
 
 #include <linux/ieee80211.h>
 
-#include "wl1271.h"
-#include "wl1271_cmd.h"
-#include "wl1271_scan.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "cmd.h"
+#include "scan.h"
+#include "acx.h"
 
 void wl1271_scan_complete_work(struct work_struct *work)
 {

drivers/net/wireless/wl12xx/scan.h

@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef __WL1271_SCAN_H__
-#define __WL1271_SCAN_H__
+#ifndef __SCAN_H__
+#define __SCAN_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 		struct cfg80211_scan_request *req);

drivers/net/wireless/wl12xx/sdio.c

@@ -32,9 +32,9 @@
 #include <linux/wl12xx.h>
 #include <linux/pm_runtime.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
 #ifndef SDIO_VENDOR_ID_TI
 #define SDIO_VENDOR_ID_TI		0x0097

drivers/net/wireless/wl12xx/spi.c

@@ -28,11 +28,11 @@
 #include <linux/wl12xx.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
-#include "wl1271_reg.h"
+#include "reg.h"
 
 #define WSPI_CMD_READ                 0x40000000
 #define WSPI_CMD_WRITE                0x00000000

drivers/net/wireless/wl12xx/testmode.c

@@ -20,13 +20,13 @@
  * 02110-1301 USA
  *
  */
-#include "wl1271_testmode.h"
+#include "testmode.h"
 
 #include <linux/slab.h>
 #include <net/genetlink.h>
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "acx.h"
 
 #define WL1271_TM_MAX_DATA_LENGTH 1024
 

drivers/net/wireless/wl12xx/testmode.h

@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_TESTMODE_H__
-#define __WL1271_TESTMODE_H__
+#ifndef __TESTMODE_H__
+#define __TESTMODE_H__
 
 #include <net/mac80211.h>
 

drivers/net/wireless/wl12xx/tx.c

@@ -24,11 +24,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include "wl1271.h"
-#include "wl1271_io.h"
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
-#include "wl1271_tx.h"
+#include "wl12xx.h"
+#include "io.h"
+#include "reg.h"
+#include "ps.h"
+#include "tx.h"
 
 static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 {
@@ -209,7 +209,7 @@ u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
 		rate_set >>= 1;
 	}
 
-#ifdef CONFIG_WL1271_HT
+#ifdef CONFIG_WL12XX_HT
 	/* MCS rates indication are on bits 16 - 23 */
 	rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates;
 

drivers/net/wireless/wl12xx/tx.h

@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_TX_H__
-#define __WL1271_TX_H__
+#ifndef __TX_H__
+#define __TX_H__
 
 #define TX_HW_BLOCK_SPARE                2
 #define TX_HW_BLOCK_SIZE                 252

drivers/net/wireless/wl12xx/wl12xx.h

@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_H__
-#define __WL1271_H__
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
 
 #include <linux/mutex.h>
 #include <linux/completion.h>
@@ -32,8 +32,8 @@
 #include <linux/bitops.h>
 #include <net/mac80211.h>
 
-#include "wl1271_conf.h"
-#include "wl1271_ini.h"
+#include "conf.h"
+#include "ini.h"
 
 #define DRIVER_NAME "wl1271"
 #define DRIVER_PREFIX DRIVER_NAME ": "