From 00f9203119dd2774564407c7a67b17d81916298b Mon Sep 17 00:00:00 2001 From: Patel Jay P Date: Mon, 23 Oct 2017 06:05:53 -0700 Subject: [PATCH] Ib/hfi1: Return actual operational VLs in port info query __subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as operational vls. hfi1_get_ib_cfg() returns vls_operational field in hfi1_pportdata. The problem with this is that the value is always equal to vls_supported field in hfi1_pportdata. The logic to calculate operational_vls is to set value passed by FM (in __subn_set_opa_portinfo routine). If no value is passed then default value is stored in operational_vls. Field actual_vls_operational is calculated on the basis of buffer control table. Hence, modifying hfi1_get_ib_cfg() to return actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter Reviewed-by: Mike Marciniszyn Reviewed-by: Dennis Dalessandro Signed-off-by: Patel Jay P Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 8dd0a4ded67b..b69b85e7a244 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -9966,7 +9966,7 @@ int hfi1_get_ib_cfg(struct hfi1_pportdata *ppd, int which) goto unimplemented; case HFI1_IB_CFG_OP_VLS: - val = ppd->vls_operational; + val = ppd->actual_vls_operational; break; case HFI1_IB_CFG_VL_HIGH_CAP: /* VL arb high priority table size */ val = VL_ARB_HIGH_PRIO_TABLE_SIZE;