cpupowerutils: bench - ConfigStyle bugfixes

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

tools/power/cpupower/Makefile

@@ -38,7 +38,7 @@ NLS ?=		true
 CPUFRQ_BENCH ?= true
 
 # Prefix to the directories we're installing to
-DESTDIR ?=	
+DESTDIR ?=
 
 # --- CONFIGURATION END ---
 
@@ -277,5 +277,4 @@ uninstall:
 		rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupowerutils.mo; \
 	  done;
 
-.PHONY: all utils libcpufreq update-po create-gmo install-lib install-tools install-man install-gmo install uninstall \
-	clean 
+.PHONY: all utils libcpufreq update-po create-gmo install-lib install-tools install-man install-gmo install uninstall clean

tools/power/cpupower/bench/benchmark.c

@@ -37,7 +37,7 @@ if (config->output != stdout) {				\
  * compute how many rounds of calculation we should do
  * to get the given load time
  *
- * @param load aimed load time in µs
+ * @param load aimed load time in µs
  *
  * @retval rounds of calculation
  **/
@@ -61,9 +61,8 @@ unsigned int calculate_timespace(long load, struct config *config)
 	timed = (unsigned int)(then - now);
 
 	/* approximation of the wanted load time by comparing with the
-	 * initial calculation time */ 
-	for (i= 0; i < 4; i++)
-	{
+	 * initial calculation time */
+	for (i = 0; i < 4; i++) {
 		rounds = (unsigned int)(load * estimated / timed);
 		dprintf("calibrating with %u rounds\n", rounds);
 		now = get_time();
@@ -102,11 +101,11 @@ void start_benchmark(struct config *config)
 	load_time = config->load;
 
 	/* For the progress bar */
-	for (_round=1; _round <= config->rounds; _round++)
+	for (_round = 1; _round <= config->rounds; _round++)
 		total_time += _round * (config->sleep + config->load);
 	total_time *= 2; /* powersave and performance cycles */
 
-	for (_round=0; _round < config->rounds; _round++) {
+	for (_round = 0; _round < config->rounds; _round++) {
 		performance_time = 0LL;
 		powersave_time = 0LL;
 
@@ -130,9 +129,10 @@ void start_benchmark(struct config *config)
 		fprintf(config->output, "%u %li %li ",
 			_round, load_time, sleep_time);
 
-		if (config->verbose) {
-			printf("avarage: %lius, rps:%li\n", load_time / calculations, 1000000 * calculations / load_time);
-		}
+		if (config->verbose)
+			printf("avarage: %lius, rps:%li\n",
+				load_time / calculations,
+				1000000 * calculations / load_time);
 
 		/* do some sleep/load cycles with the performance governor */
 		for (cycle = 0; cycle < config->cycles; cycle++) {
@@ -142,10 +142,14 @@ void start_benchmark(struct config *config)
 			then = get_time();
 			performance_time += then - now - sleep_time;
 			if (config->verbose)
-				printf("performance cycle took %lius, sleep: %lius, load: %lius, rounds: %u\n",
-					(long)(then - now), sleep_time, load_time, calculations);
+				printf("performance cycle took %lius, "
+					"sleep: %lius, "
+					"load: %lius, rounds: %u\n",
+					(long)(then - now), sleep_time,
+					load_time, calculations);
 		}
-		fprintf(config->output, "%li ", performance_time / config->cycles);
+		fprintf(config->output, "%li ",
+			performance_time / config->cycles);
 
 		progress_time += sleep_time + load_time;
 		show_progress(total_time, progress_time);
@@ -155,7 +159,8 @@ void start_benchmark(struct config *config)
 		if (set_cpufreq_governor(config->governor, config->cpu) != 0)
 			return;
 
-		/* again, do some sleep/load cycles with the powersave governor */
+		/* again, do some sleep/load cycles with the
+		 * powersave governor */
 		for (cycle = 0; cycle < config->cycles; cycle++) {
 			now = get_time();
 			usleep(sleep_time);
@@ -163,22 +168,27 @@ void start_benchmark(struct config *config)
 			then = get_time();
 			powersave_time += then - now - sleep_time;
 			if (config->verbose)
-				printf("powersave cycle took %lius, sleep: %lius, load: %lius, rounds: %u\n",
-					(long)(then - now), sleep_time, load_time, calculations);
+				printf("powersave cycle took %lius, "
+					"sleep: %lius, "
+					"load: %lius, rounds: %u\n",
+					(long)(then - now), sleep_time,
+					load_time, calculations);
 		}
 
 		progress_time += sleep_time + load_time;
 
 		/* compare the avarage sleep/load cycles  */
-		fprintf(config->output, "%li ", powersave_time / config->cycles);
-		fprintf(config->output, "%.3f\n", performance_time * 100.0 / powersave_time);
+		fprintf(config->output, "%li ",
+			powersave_time / config->cycles);
+		fprintf(config->output, "%.3f\n",
+			performance_time * 100.0 / powersave_time);
 		fflush(config->output);
 
 		if (config->verbose)
-			printf("performance is at %.2f%%\n", performance_time * 100.0 / powersave_time);
+			printf("performance is at %.2f%%\n",
+				performance_time * 100.0 / powersave_time);
 
 		sleep_time += config->sleep_step;
 		load_time += config->load_step;
 	}
 }
-

tools/power/cpupower/bench/benchmark.h

@@ -19,9 +19,11 @@
 
 /* load loop, this schould take about 1 to 2ms to complete */
 #define ROUNDS(x) {unsigned int rcnt;			       \
-		for (rcnt = 0; rcnt< x*1000; rcnt++) { \
-			(void)(((int)(pow(rcnt, rcnt) * sqrt(rcnt*7230970)) ^ 7230716) ^ (int)atan2(rcnt, rcnt)); \
-		}}							\
+		for (rcnt = 0; rcnt < x*1000; rcnt++) { \
+			(void)(((int)(pow(rcnt, rcnt) * \
+				      sqrt(rcnt*7230970)) ^ 7230716) ^ \
+				      (int)atan2(rcnt, rcnt));	       \
+		} }							\
 
 
 void start_benchmark(struct config *config);

tools/power/cpupower/bench/config.h

@@ -31,6 +31,6 @@
 #ifdef DEBUG
 #define dprintf printf
 #else
-#define dprintf( ... ) while(0) { }
+#define dprintf(...) do { } while (0)
 #endif
 

tools/power/cpupower/bench/main.c

@@ -28,8 +28,7 @@
 #include "system.h"
 #include "benchmark.h"
 
-static struct option long_options[] =
-{
+static struct option long_options[] = {
 	{"output",	1,	0,	'o'},
 	{"sleep",	1,	0,	's'},
 	{"load",	1,	0,	'l'},
@@ -50,7 +49,7 @@ static struct option long_options[] =
  usage
 *******************************************************************/
 
-void usage() 
+void usage()
 {
 	printf("usage: ./bench\n");
 	printf("Options:\n");
@@ -67,7 +66,7 @@ void usage()
 	printf(" -o, --output=<dir>\t\t\toutput path. Filename will be OUTPUTPATH/benchmark_TIMESTAMP.log\n");
 	printf(" -v, --verbose\t\t\t\tverbose output on/off\n");
 	printf(" -h, --help\t\t\t\tPrint this help screen\n");
-	exit (1);
+	exit(1);
 }
 
 /*******************************************************************

tools/power/cpupower/bench/parse.c

@@ -86,20 +86,22 @@ FILE *prepare_output(const char *dirname)
 		len += strlen(sysdata.nodename) + strlen(sysdata.release);
 		filename = realloc(filename, sizeof(char) * len);
 
-		if(filename == NULL) {
+		if (filename == NULL) {
 			perror("realloc");
 			return NULL;
 		}
 
-		snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log", 
+		snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log",
 			dirname, sysdata.nodename, sysdata.release, time(NULL));
 	} else {
-		snprintf(filename, len -1, "%s/benchmark_%li.log", dirname, time(NULL));
+		snprintf(filename, len - 1, "%s/benchmark_%li.log",
+			dirname, time(NULL));
 	}
 
 	dprintf("logilename: %s\n", filename);
 
-	if ((output = fopen(filename, "w+")) == NULL) {
+	output = fopen(filename, "w+");
+	if (output == NULL) {
 		perror("fopen");
 		fprintf(stderr, "error: unable to open logfile\n");
 	}
@@ -130,7 +132,7 @@ struct config *prepare_default_config()
 	config->load_step = 500000;
 	config->cycles = 5;
 	config->rounds = 50;
-	config->cpu = 0;	
+	config->cpu = 0;
 	config->prio = SCHED_HIGH;
 	config->verbose = 0;
 	strncpy(config->governor, "ondemand", 8);
@@ -166,13 +168,12 @@ int prepare_config(const char *path, struct config *config)
 
 	if (configfile == NULL) {
 		perror("fopen");
-                fprintf(stderr, "error: unable to read configfile\n");
+		fprintf(stderr, "error: unable to read configfile\n");
 		free(config);
 		return 1;
 	}
 
-	while (getline(&line, &len, configfile) != -1)
-	{
+	while (getline(&line, &len, configfile) != -1) {
 		if (line[0] == '#' || line[0] == ' ')
 			continue;
 
@@ -183,35 +184,35 @@ int prepare_config(const char *path, struct config *config)
 		if (strncmp("sleep", opt, strlen(opt)) == 0)
 			sscanf(val, "%li", &config->sleep);
 
-		else if (strncmp("load", opt, strlen(opt)) == 0) 
+		else if (strncmp("load", opt, strlen(opt)) == 0)
 			sscanf(val, "%li", &config->load);
 
-		else if (strncmp("load_step", opt, strlen(opt)) == 0) 
+		else if (strncmp("load_step", opt, strlen(opt)) == 0)
 			sscanf(val, "%li", &config->load_step);
 
-		else if (strncmp("sleep_step", opt, strlen(opt)) == 0) 
+		else if (strncmp("sleep_step", opt, strlen(opt)) == 0)
 			sscanf(val, "%li", &config->sleep_step);
 
-		else if (strncmp("cycles", opt, strlen(opt)) == 0) 
+		else if (strncmp("cycles", opt, strlen(opt)) == 0)
 			sscanf(val, "%u", &config->cycles);
 
-		else if (strncmp("rounds", opt, strlen(opt)) == 0) 
+		else if (strncmp("rounds", opt, strlen(opt)) == 0)
 			sscanf(val, "%u", &config->rounds);
 
-		else if (strncmp("verbose", opt, strlen(opt)) == 0) 
+		else if (strncmp("verbose", opt, strlen(opt)) == 0)
 			sscanf(val, "%u", &config->verbose);
 
-		else if (strncmp("output", opt, strlen(opt)) == 0) 
+		else if (strncmp("output", opt, strlen(opt)) == 0)
 			config->output = prepare_output(val); 
 
-		else if (strncmp("cpu", opt, strlen(opt)) == 0) 
+		else if (strncmp("cpu", opt, strlen(opt)) == 0)
 			sscanf(val, "%u", &config->cpu);
 
-		else if (strncmp("governor", opt, 14) == 0) 
+		else if (strncmp("governor", opt, 14) == 0)
 			strncpy(config->governor, val, 14);
 
 		else if (strncmp("priority", opt, strlen(opt)) == 0) {
-			if (string_to_prio(val) != SCHED_ERR) 
+			if (string_to_prio(val) != SCHED_ERR)
 				config->prio = string_to_prio(val);
 		}
 	}

tools/power/cpupower/bench/parse.h

@@ -20,19 +20,22 @@
 /* struct that holds the required config parameters */
 struct config
 {
-	long sleep;		/* sleep time in µs */
-	long load;		/* load time in µs */
+	long sleep;		/* sleep time in µs */
+	long load;		/* load time in µs */
 	long sleep_step;	/* time value which changes the
-				 * sleep time after every round in µs */
+				 * sleep time after every round in µs */
 	long load_step;		/* time value which changes the
-				 * load time after every round in µs */
+				 * load time after every round in µs */
 	unsigned int cycles;	/* calculation cycles with the same sleep/load time */
 	unsigned int rounds;	/* calculation rounds with iterated sleep/load time */
 	unsigned int cpu;	/* cpu for which the affinity is set */
 	char governor[15];	/* cpufreq governor */
 	enum sched_prio		/* possible scheduler priorities */
 	{
-		SCHED_ERR=-1,SCHED_HIGH, SCHED_DEFAULT, SCHED_LOW
+		SCHED_ERR = -1,
+		SCHED_HIGH,
+		SCHED_DEFAULT,
+		SCHED_LOW
 	} prio;
 
 	unsigned int verbose;	/* verbose output */

tools/power/cpupower/bench/system.c

@@ -31,7 +31,7 @@
 #include "system.h"
 
 /**
- * returns time since epoch in µs
+ * returns time since epoch in µs
  *
  * @retval time
  **/
@@ -87,7 +87,7 @@ int set_cpufreq_governor(char *governor, unsigned int cpu)
 int set_cpu_affinity(unsigned int cpu)
 {
 	cpu_set_t cpuset;
-	
+
 	CPU_ZERO(&cpuset);
 	CPU_SET(cpu, &cpuset);
 
@@ -129,7 +129,7 @@ int set_process_priority(int priority)
 }
 
 /**
- * notifys the user that the benchmark may run some time 
+ * notifies the user that the benchmark may run some time
  *
  * @param config benchmark config values
  *
@@ -142,8 +142,11 @@ void prepare_user(const struct config *config)
 	unsigned int round;
 
 	for (round = 0; round < config->rounds; round++) {
-		sleep_time +=  2 * config->cycles * (config->sleep + config->sleep_step * round);
-		load_time += 2 * config->cycles * (config->load + config->load_step * round) + (config->load + config->load_step * round * 4);
+		sleep_time +=  2 * config->cycles *
+			(config->sleep + config->sleep_step * round);
+		load_time += 2 * config->cycles *
+			(config->load + config->load_step * round) +
+			(config->load + config->load_step * round * 4);
 	}
 
 	if (config->verbose || config->output != stdout)