microblaze: Add support for little-endian Microblaze

Microblaze little-endian toolchain exports __MICROBLAZEEL__
which is used in the kernel to identify little/big endian.

The most of the changes are in loading values from DTB which
is always big endian.

Little endian platforms are based on new AXI bus which has
impact to early uartlite initialization.

Signed-off-by: Michal Simek <monstr@monstr.eu>

arch/microblaze/include/asm/byteorder.h

@@ -1,6 +1,10 @@
 #ifndef _ASM_MICROBLAZE_BYTEORDER_H
 #define _ASM_MICROBLAZE_BYTEORDER_H
 
+#ifdef __MICROBLAZEEL__
+#include <linux/byteorder/little_endian.h>
+#else
 #include <linux/byteorder/big_endian.h>
+#endif
 
 #endif /* _ASM_MICROBLAZE_BYTEORDER_H */

arch/microblaze/include/asm/checksum.h

@@ -24,8 +24,13 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 		"addc %0, %0, %3\n\t"
 		"addc %0, %0, r0\n\t"
 		: "+&d" (sum)
-		: "d" (saddr), "d" (daddr), "d" (len + proto));
-
+		: "d" (saddr), "d" (daddr),
+#ifdef __MICROBLAZEEL__
+	"d" ((len + proto) << 8)
+#else
+	"d" (len + proto)
+#endif
+);
 	return sum;
 }
 

arch/microblaze/include/asm/cpuinfo.h

@@ -98,7 +98,8 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu);
 static inline unsigned int fcpu(struct device_node *cpu, char *n)
 {
 	int *val;
-	return (val = (int *) of_get_property(cpu, n, NULL)) ? *val : 0;
+	return (val = (int *) of_get_property(cpu, n, NULL)) ?
+							be32_to_cpup(val) : 0;
 }
 
 #endif /* _ASM_MICROBLAZE_CPUINFO_H */

arch/microblaze/include/asm/elf.h

@@ -71,7 +71,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #define ELF_ET_DYN_BASE         (0x08000000)
 
-#ifdef __LITTLE_ENDIAN__
+#ifdef __MICROBLAZEEL__
 #define ELF_DATA	ELFDATA2LSB
 #else
 #define ELF_DATA	ELFDATA2MSB

arch/microblaze/include/asm/unaligned.h

@@ -12,12 +12,18 @@
 
 # ifdef __KERNEL__
 
-# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/be_byteshift.h>
 # include <linux/unaligned/le_byteshift.h>
 # include <linux/unaligned/generic.h>
 
+
+#  ifdef __MICROBLAZEEL__
+#   define get_unaligned	__get_unaligned_le
+#   define put_unaligned	__put_unaligned_le
+#  else
 #   define get_unaligned	__get_unaligned_be
 #   define put_unaligned	__put_unaligned_be
+#  endif
 
 # endif	/* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_UNALIGNED_H */

arch/microblaze/kernel/heartbeat.c

@@ -59,7 +59,7 @@ void setup_heartbeat(void)
 	}
 
 	if (gpio) {
-		base_addr = *(int *) of_get_property(gpio, "reg", NULL);
+		base_addr = be32_to_cpup(of_get_property(gpio, "reg", NULL));
 		base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
 		printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
 

arch/microblaze/kernel/intc.c

@@ -138,12 +138,15 @@ void __init init_IRQ(void)
 	}
 	BUG_ON(!intc);
 
-	intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
+	intc_baseaddr = be32_to_cpup(of_get_property(intc,
+								"reg", NULL));
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
-	nr_irq = *(int *) of_get_property(intc, "xlnx,num-intr-inputs", NULL);
+	nr_irq = be32_to_cpup(of_get_property(intc,
+						"xlnx,num-intr-inputs", NULL));
 
 	intr_type =
-		*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
+		be32_to_cpup(of_get_property(intc,
+						"xlnx,kind-of-intr", NULL));
 	if (intr_type >= (1 << (nr_irq + 1)))
 		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 

arch/microblaze/kernel/prom.c

@@ -77,11 +77,12 @@ static int __init early_init_dt_scan_serial(unsigned long node,
 /* find compatible node with uartlite */
 	p = of_get_flat_dt_prop(node, "compatible", &l);
 	if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
-			(strncmp(p, "xlnx,opb-uartlite", 17) != 0))
+			(strncmp(p, "xlnx,opb-uartlite", 17) != 0) &&
+			(strncmp(p, "xlnx,axi-uartlite", 17) != 0))
 		return 0;
 
 	addr = of_get_flat_dt_prop(node, "reg", &l);
-	return *addr; /* return address */
+	return be32_to_cpup(addr); /* return address */
 }
 
 /* this function is looking for early uartlite console - Microblaze specific */
@@ -115,7 +116,7 @@ static int __init early_init_dt_scan_serial_full(unsigned long node,
 
 	addr = *(u32 *)of_get_flat_dt_prop(node, "reg", &l);
 	addr += *(u32 *)of_get_flat_dt_prop(node, "reg-offset", &l);
-	return addr; /* return address */
+	return be32_to_cpu(addr); /* return address */
 }
 
 /* this function is looking for early uartlite console - Microblaze specific */

arch/microblaze/kernel/timer.c

@@ -270,11 +270,11 @@ void __init time_init(void)
 	}
 	BUG_ON(!timer);
 
-	timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
+	timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL));
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
-	irq = *(int *) of_get_property(timer, "interrupts", NULL);
-	timer_num =
-		*(int *) of_get_property(timer, "xlnx,one-timer-only", NULL);
+	irq = be32_to_cpup(of_get_property(timer, "interrupts", NULL));
+	timer_num = be32_to_cpup(of_get_property(timer,
+						"xlnx,one-timer-only", NULL));
 	if (timer_num) {
 		eprintk(KERN_EMERG "Please enable two timers in HW\n");
 		BUG();

arch/microblaze/kernel/vmlinux.lds.S

@@ -15,7 +15,11 @@ ENTRY(microblaze_start)
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 
+#ifdef __MICROBLAZEEL__
+jiffies = jiffies_64;
+#else
 jiffies = jiffies_64 + 4;
+#endif
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;