From 032838f9cb4014af8a974374db9e2ce6f3aa8d3b Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 8 May 2017 12:33:48 -0700 Subject: [PATCH] drm/pl111: Register the clock divider and use it. This is required for the panel to work on bcm911360, where CLCDCLK is the fixed 200Mhz AXI41 clock. The rate set is still passed up to the CLCDCLK, for platforms that have a settable rate on that one. v2: Set SET_RATE_PARENT (caught by Linus Walleij), depend on COMMON_CLK. v3: Mark the clk_ops static (caught by Stephen). Signed-off-by: Eric Anholt Link: http://patchwork.freedesktop.org/patch/msgid/20170508193348.30236-1-eric@anholt.net Reviewed-by: Linus Walleij Reviewed-by: Stephen Boyd --- drivers/gpu/drm/pl111/Kconfig | 1 + drivers/gpu/drm/pl111/pl111_display.c | 162 +++++++++++++++++++++++--- drivers/gpu/drm/pl111/pl111_drm.h | 8 ++ drivers/gpu/drm/pl111/pl111_drv.c | 11 +- include/linux/amba/clcd-regs.h | 5 + 5 files changed, 163 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/pl111/Kconfig b/drivers/gpu/drm/pl111/Kconfig index ede49efd531f..309f4fd52de7 100644 --- a/drivers/gpu/drm/pl111/Kconfig +++ b/drivers/gpu/drm/pl111/Kconfig @@ -2,6 +2,7 @@ config DRM_PL111 tristate "DRM Support for PL111 CLCD Controller" depends on DRM depends on ARM || ARM64 || COMPILE_TEST + depends on COMMON_CLK select DRM_KMS_HELPER select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c index 39a5c33bce7d..fbf8fbec6c16 100644 --- a/drivers/gpu/drm/pl111/pl111_display.c +++ b/drivers/gpu/drm/pl111/pl111_display.c @@ -108,7 +108,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, u32 cntl; u32 ppl, hsw, hfp, hbp; u32 lpp, vsw, vfp, vbp; - u32 cpl; + u32 cpl, tim2; int ret; ret = clk_set_rate(priv->clk, mode->clock * 1000); @@ -142,20 +142,28 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe, (vfp << 16) | (vbp << 24), priv->regs + CLCD_TIM1); - /* XXX: We currently always use CLCDCLK with no divisor. We - * could probably reduce power consumption by using HCLK - * (apb_pclk) with a divisor when it gets us near our target - * pixel clock. - */ - writel(((mode->flags & DRM_MODE_FLAG_NHSYNC) ? TIM2_IHS : 0) | - ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? TIM2_IVS : 0) | - ((connector->display_info.bus_flags & - DRM_BUS_FLAG_DE_LOW) ? TIM2_IOE : 0) | - ((connector->display_info.bus_flags & - DRM_BUS_FLAG_PIXDATA_NEGEDGE) ? TIM2_IPC : 0) | - TIM2_BCD | - (cpl << 16), - priv->regs + CLCD_TIM2); + + spin_lock(&priv->tim2_lock); + + tim2 = readl(priv->regs + CLCD_TIM2); + tim2 &= (TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK); + + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + tim2 |= TIM2_IHS; + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + tim2 |= TIM2_IVS; + + if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) + tim2 |= TIM2_IOE; + + if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) + tim2 |= TIM2_IPC; + + tim2 |= cpl << 16; + writel(tim2, priv->regs + CLCD_TIM2); + spin_unlock(&priv->tim2_lock); + writel(0, priv->regs + CLCD_TIM3); drm_panel_prepare(priv->connector.panel); @@ -288,6 +296,126 @@ const struct drm_simple_display_pipe_funcs pl111_display_funcs = { .prepare_fb = pl111_display_prepare_fb, }; +static int pl111_clk_div_choose_div(struct clk_hw *hw, unsigned long rate, + unsigned long *prate, bool set_parent) +{ + int best_div = 1, div; + struct clk_hw *parent = clk_hw_get_parent(hw); + unsigned long best_prate = 0; + unsigned long best_diff = ~0ul; + int max_div = (1 << (TIM2_PCD_LO_BITS + TIM2_PCD_HI_BITS)) - 1; + + for (div = 1; div < max_div; div++) { + unsigned long this_prate, div_rate, diff; + + if (set_parent) + this_prate = clk_hw_round_rate(parent, rate * div); + else + this_prate = *prate; + div_rate = DIV_ROUND_UP_ULL(this_prate, div); + diff = abs(rate - div_rate); + + if (diff < best_diff) { + best_div = div; + best_diff = diff; + best_prate = this_prate; + } + } + + *prate = best_prate; + return best_div; +} + +static long pl111_clk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int div = pl111_clk_div_choose_div(hw, rate, prate, true); + + return DIV_ROUND_UP_ULL(*prate, div); +} + +static unsigned long pl111_clk_div_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct pl111_drm_dev_private *priv = + container_of(hw, struct pl111_drm_dev_private, clk_div); + u32 tim2 = readl(priv->regs + CLCD_TIM2); + int div; + + if (tim2 & TIM2_BCD) + return prate; + + div = tim2 & TIM2_PCD_LO_MASK; + div |= (tim2 & TIM2_PCD_HI_MASK) >> + (TIM2_PCD_HI_SHIFT - TIM2_PCD_LO_BITS); + div += 2; + + return DIV_ROUND_UP_ULL(prate, div); +} + +static int pl111_clk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long prate) +{ + struct pl111_drm_dev_private *priv = + container_of(hw, struct pl111_drm_dev_private, clk_div); + int div = pl111_clk_div_choose_div(hw, rate, &prate, false); + u32 tim2; + + spin_lock(&priv->tim2_lock); + tim2 = readl(priv->regs + CLCD_TIM2); + tim2 &= ~(TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK); + + if (div == 1) { + tim2 |= TIM2_BCD; + } else { + div -= 2; + tim2 |= div & TIM2_PCD_LO_MASK; + tim2 |= (div >> TIM2_PCD_LO_BITS) << TIM2_PCD_HI_SHIFT; + } + + writel(tim2, priv->regs + CLCD_TIM2); + spin_unlock(&priv->tim2_lock); + + return 0; +} + +static const struct clk_ops pl111_clk_div_ops = { + .recalc_rate = pl111_clk_div_recalc_rate, + .round_rate = pl111_clk_div_round_rate, + .set_rate = pl111_clk_div_set_rate, +}; + +static int +pl111_init_clock_divider(struct drm_device *drm) +{ + struct pl111_drm_dev_private *priv = drm->dev_private; + struct clk *parent = devm_clk_get(drm->dev, "clcdclk"); + struct clk_hw *div = &priv->clk_div; + const char *parent_name; + struct clk_init_data init = { + .name = "pl111_div", + .ops = &pl111_clk_div_ops, + .parent_names = &parent_name, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + }; + int ret; + + if (IS_ERR(parent)) { + dev_err(drm->dev, "CLCD: unable to get clcdclk.\n"); + return PTR_ERR(parent); + } + parent_name = __clk_get_name(parent); + + spin_lock_init(&priv->tim2_lock); + div->init = &init; + + ret = devm_clk_hw_register(drm->dev, div); + + priv->clk = div->clk; + return ret; +} + int pl111_display_init(struct drm_device *drm) { struct pl111_drm_dev_private *priv = drm->dev_private; @@ -333,6 +461,10 @@ int pl111_display_init(struct drm_device *drm) return -EINVAL; } + ret = pl111_init_clock_divider(drm); + if (ret) + return ret; + ret = drm_simple_display_pipe_init(drm, &priv->pipe, &pl111_display_funcs, formats, ARRAY_SIZE(formats), diff --git a/drivers/gpu/drm/pl111/pl111_drm.h b/drivers/gpu/drm/pl111/pl111_drm.h index f381593921b7..4162c6aa5dbb 100644 --- a/drivers/gpu/drm/pl111/pl111_drm.h +++ b/drivers/gpu/drm/pl111/pl111_drm.h @@ -21,6 +21,7 @@ #include #include +#include #define CLCD_IRQ_NEXTBASE_UPDATE BIT(2) @@ -37,7 +38,14 @@ struct pl111_drm_dev_private { struct drm_fbdev_cma *fbdev; void *regs; + /* The pixel clock (a reference to our clock divider off of CLCDCLK). */ struct clk *clk; + /* pl111's internal clock divider. */ + struct clk_hw clk_div; + /* Lock to sync access to CLCD_TIM2 between the common clock + * subsystem and pl111_display_enable(). + */ + spinlock_t tim2_lock; }; #define to_pl111_connector(x) \ diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index 936403f65508..9d1467492cb9 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -50,8 +50,8 @@ * - Read back hardware state at boot to skip reprogramming the * hardware when doing a no-op modeset. * - * - Use the internal clock divisor to reduce power consumption by - * using HCLK (apb_pclk) when appropriate. + * - Use the CLKSEL bit to support switching between the two external + * clock parents. */ #include @@ -195,13 +195,6 @@ static int pl111_amba_probe(struct amba_device *amba_dev, priv->drm = drm; drm->dev_private = priv; - priv->clk = devm_clk_get(dev, "clcdclk"); - if (IS_ERR(priv->clk)) { - dev_err(dev, "CLCD: unable to get clk.\n"); - ret = PTR_ERR(priv->clk); - goto dev_unref; - } - priv->regs = devm_ioremap_resource(dev, &amba_dev->res); if (!priv->regs) { dev_err(dev, "%s failed mmio\n", __func__); diff --git a/include/linux/amba/clcd-regs.h b/include/linux/amba/clcd-regs.h index 69c0e2143003..516a6fda83c5 100644 --- a/include/linux/amba/clcd-regs.h +++ b/include/linux/amba/clcd-regs.h @@ -39,12 +39,17 @@ #define CLCD_PALL 0x00000200 #define CLCD_PALETTE 0x00000200 +#define TIM2_PCD_LO_MASK GENMASK(4, 0) +#define TIM2_PCD_LO_BITS 5 #define TIM2_CLKSEL (1 << 5) #define TIM2_IVS (1 << 11) #define TIM2_IHS (1 << 12) #define TIM2_IPC (1 << 13) #define TIM2_IOE (1 << 14) #define TIM2_BCD (1 << 26) +#define TIM2_PCD_HI_MASK GENMASK(31, 27) +#define TIM2_PCD_HI_BITS 5 +#define TIM2_PCD_HI_SHIFT 27 #define CNTL_LCDEN (1 << 0) #define CNTL_LCDBPP1 (0 << 1)