V4L/DVB (13998): gscpa_ov519: Fix 320x240 on ov519 + ov7648

Differentiate between ov7640 and ov7648 and handle the ov7648 320x240
on the ov519 bridge specially to fix r and b being swapped.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Hans de Goede 2010-01-09 08:14:43 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 859cc4700e
Коммит 035d3a3d3f
1 изменённых файлов: 32 добавлений и 12 удалений

Просмотреть файл

@ -101,9 +101,10 @@ struct sd {
#define SEN_OV7620 7
#define SEN_OV7620AE 8
#define SEN_OV7640 9
#define SEN_OV7670 10
#define SEN_OV76BE 11
#define SEN_OV8610 12
#define SEN_OV7648 10
#define SEN_OV7670 11
#define SEN_OV76BE 12
#define SEN_OV8610 13
u8 sensor_addr;
int sensor_width;
@ -2589,7 +2590,7 @@ static int ov7xx0_configure(struct sd *sd)
break;
case 0x48:
PDEBUG(D_PROBE, "Sensor is an OV7648");
sd->sensor = SEN_OV7640; /* FIXME */
sd->sensor = SEN_OV7648;
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
@ -3116,7 +3117,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
(1 << OV7670_FREQ_IDX);
}
sd->quality = QUALITY_DEF;
if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
if (sd->sensor == SEN_OV7640 ||
sd->sensor == SEN_OV7648 ||
sd->sensor == SEN_OV7670)
gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
/* OV8610 Frequency filter control should work but needs testing */
if (sd->sensor == SEN_OV8610)
@ -3175,6 +3178,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
return -EIO;
break;
case SEN_OV7640:
case SEN_OV7648:
if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
return -EIO;
break;
@ -3250,6 +3254,7 @@ static int ov511_mode_init_regs(struct sd *sd)
case SEN_OV7620:
case SEN_OV7620AE:
case SEN_OV7640:
case SEN_OV7648:
case SEN_OV76BE:
if (sd->gspca_dev.width == 320)
interlaced = 1;
@ -3495,7 +3500,8 @@ static int ov519_mode_init_regs(struct sd *sd)
if (write_regvals(sd, mode_init_519,
ARRAY_SIZE(mode_init_519)))
return -EIO;
if (sd->sensor == SEN_OV7640) {
if (sd->sensor == SEN_OV7640 ||
sd->sensor == SEN_OV7648) {
/* Select 8-bit input mode */
reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
}
@ -3510,6 +3516,9 @@ static int ov519_mode_init_regs(struct sd *sd)
if (sd->sensor == SEN_OV7670 &&
sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
reg_w(sd, OV519_R12_X_OFFSETL, 0x04);
else if (sd->sensor == SEN_OV7648 &&
sd->gspca_dev.cam.cam_mode[sd->gspca_dev.curr_mode].priv)
reg_w(sd, OV519_R12_X_OFFSETL, 0x01);
else
reg_w(sd, OV519_R12_X_OFFSETL, 0x00);
reg_w(sd, OV519_R13_X_OFFSETH, 0x00);
@ -3527,6 +3536,7 @@ static int ov519_mode_init_regs(struct sd *sd)
sd->clockdiv = 0;
switch (sd->sensor) {
case SEN_OV7640:
case SEN_OV7648:
switch (sd->frame_rate) {
default:
/* case 30: */
@ -3671,13 +3681,18 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e);
break;
case SEN_OV7640:
case SEN_OV7648:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
/* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */
/* i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); */
/* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */
/* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */
/* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */
/* The following 5 lines where commented out before with a
comment wondering if they did anything. This was because
the old driver did only 640x480, at 320x240 these 5 writes
*significantly* improve the image quality. */
i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */
break;
case SEN_OV7670:
@ -3809,6 +3824,7 @@ static int set_ov_sensor_window(struct sd *sd)
vwsbase = vwebase = 0x05;
break;
case SEN_OV7640:
case SEN_OV7648:
hwsbase = 0x1a;
hwebase = 0x1a;
vwsbase = vwebase = 0x03;
@ -4112,6 +4128,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
case SEN_OV6630:
case SEN_OV66308AF:
case SEN_OV7640:
case SEN_OV7648:
i2c_w(sd, OV7610_REG_BRT, val);
break;
case SEN_OV7620:
@ -4164,6 +4181,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
break;
}
case SEN_OV7640:
case SEN_OV7648:
/* Use gain control instead. */
i2c_w(sd, OV7610_REG_GAIN, val >> 2);
break;
@ -4198,6 +4216,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
i2c_w(sd, OV7610_REG_SAT, val);
break;
case SEN_OV7640:
case SEN_OV7648:
i2c_w(sd, OV7610_REG_SAT, val & 0xf0);
break;
case SEN_OV7670:
@ -4210,7 +4229,8 @@ static void setcolors(struct gspca_dev *gspca_dev)
static void setautobrightness(struct sd *sd)
{
if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 ||
if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7648 ||
sd->sensor == SEN_OV7670 ||
sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
return;