[PATCH] ARM: 2686/2: AAEC-2000 Core support
Patch from Bellido Nicolas Core support for AAEC-2000 based platforms. This is an updated version of the previous patch, and takes into account Russell's comments. AAED-2000 default configuration will follow as soon as some problems with the bootloader are sorted out... Signed-off-by: Nicolas Bellido Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Bellido Nicolas
Russell King
Родитель
09f0551d20
Коммит
038c5b6025
|
|
@ -198,6 +198,11 @@ config ARCH_H720X
|
|||
help
|
||||
This enables support for systems based on the Hynix HMS720x
|
||||
|
||||
config ARCH_AAEC2000
|
||||
bool "Agilent AAEC-2000 based"
|
||||
help
|
||||
This enables support for systems based on the Agilent AAEC-2000
|
||||
|
||||
endchoice
|
||||
|
||||
source "arch/arm/mach-clps711x/Kconfig"
|
||||
|
|
@ -230,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig"
|
|||
|
||||
source "arch/arm/mach-versatile/Kconfig"
|
||||
|
||||
source "arch/arm/mach-aaec2000/Kconfig"
|
||||
|
||||
# Definitions to make life easier
|
||||
config ARCH_ACORN
|
||||
bool
|
||||
|
|
|
|||
|
|
@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
|
|||
machine-$(CONFIG_ARCH_VERSATILE) := versatile
|
||||
machine-$(CONFIG_ARCH_IMX) := imx
|
||||
machine-$(CONFIG_ARCH_H720X) := h720x
|
||||
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
|
||||
|
||||
ifeq ($(CONFIG_ARCH_EBSA110),y)
|
||||
# This is what happens if you forget the IOCS16 line.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,11 @@
|
|||
if ARCH_AAEC2000
|
||||
|
||||
menu "Agilent AAEC-2000 Implementations"
|
||||
|
||||
config MACH_AAED2000
|
||||
bool "Agilent AAED-2000 Development Platform"
|
||||
select CPU_ARM920T
|
||||
|
||||
endmenu
|
||||
|
||||
endif
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
#
|
||||
# Makefile for the linux kernel.
|
||||
#
|
||||
|
||||
# Common support (must be linked before board specific support)
|
||||
obj-y += core.o
|
||||
|
||||
# Specific board support
|
||||
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/aaed2000.c
|
||||
*
|
||||
* Support for the Agilent AAED-2000 Development Platform.
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/major.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/memory.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include "core.h"
|
||||
|
||||
static void __init aaed2000_init_irq(void)
|
||||
{
|
||||
aaec2000_init_irq();
|
||||
}
|
||||
|
||||
static void __init aaed2000_map_io(void)
|
||||
{
|
||||
aaec2000_map_io();
|
||||
}
|
||||
|
||||
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
|
||||
MAINTAINER("Nicolas Bellido Y Ortega")
|
||||
BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE)
|
||||
MAPIO(aaed2000_map_io)
|
||||
INITIRQ(aaed2000_init_irq)
|
||||
.timer = &aaec2000_timer,
|
||||
MACHINE_END
|
||||
|
|
@ -0,0 +1,157 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/core.c
|
||||
*
|
||||
* Code common to all AAEC-2000 machines
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/signal.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/mach/map.h>
|
||||
|
||||
/*
|
||||
* Common I/O mapping:
|
||||
*
|
||||
* Static virtual address mappings are as follow:
|
||||
*
|
||||
* 0xf8000000-0xf8001ffff: Devices connected to APB bus
|
||||
* 0xf8002000-0xf8003ffff: Devices connected to AHB bus
|
||||
*
|
||||
* Below 0xe8000000 is reserved for vm allocation.
|
||||
*
|
||||
* The machine specific code must provide the extra mapping beside the
|
||||
* default mapping provided here.
|
||||
*/
|
||||
static struct map_desc standard_io_desc[] __initdata = {
|
||||
/* virtual physical length type */
|
||||
{ VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
|
||||
{ VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
|
||||
};
|
||||
|
||||
void __init aaec2000_map_io(void)
|
||||
{
|
||||
iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
|
||||
}
|
||||
|
||||
/*
|
||||
* Interrupt handling routines
|
||||
*/
|
||||
static void aaec2000_int_ack(unsigned int irq)
|
||||
{
|
||||
IRQ_INTSR = 1 << irq;
|
||||
}
|
||||
|
||||
static void aaec2000_int_mask(unsigned int irq)
|
||||
{
|
||||
IRQ_INTENC |= (1 << irq);
|
||||
}
|
||||
|
||||
static void aaec2000_int_unmask(unsigned int irq)
|
||||
{
|
||||
IRQ_INTENS |= (1 << irq);
|
||||
}
|
||||
|
||||
static struct irqchip aaec2000_irq_chip = {
|
||||
.ack = aaec2000_int_ack,
|
||||
.mask = aaec2000_int_mask,
|
||||
.unmask = aaec2000_int_unmask,
|
||||
};
|
||||
|
||||
void __init aaec2000_init_irq(void)
|
||||
{
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < NR_IRQS; i++) {
|
||||
set_irq_handler(i, do_level_IRQ);
|
||||
set_irq_chip(i, &aaec2000_irq_chip);
|
||||
set_irq_flags(i, IRQF_VALID);
|
||||
}
|
||||
|
||||
/* Disable all interrupts */
|
||||
IRQ_INTENC = 0xffffffff;
|
||||
|
||||
/* Clear any pending interrupts */
|
||||
IRQ_INTSR = IRQ_INTSR;
|
||||
}
|
||||
|
||||
/*
|
||||
* Time keeping
|
||||
*/
|
||||
/* IRQs are disabled before entering here from do_gettimeofday() */
|
||||
static unsigned long aaec2000_gettimeoffset(void)
|
||||
{
|
||||
unsigned long ticks_to_match, elapsed, usec;
|
||||
|
||||
/* Get ticks before next timer match */
|
||||
ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
|
||||
|
||||
/* We need elapsed ticks since last match */
|
||||
elapsed = LATCH - ticks_to_match;
|
||||
|
||||
/* Now, convert them to usec */
|
||||
usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
|
||||
|
||||
return usec;
|
||||
}
|
||||
|
||||
/* We enter here with IRQs enabled */
|
||||
static irqreturn_t
|
||||
aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
||||
{
|
||||
/* TODO: Check timer accuracy */
|
||||
write_seqlock(&xtime_lock);
|
||||
|
||||
timer_tick(regs);
|
||||
TIMER1_CLEAR = 1;
|
||||
|
||||
write_sequnlock(&xtime_lock);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction aaec2000_timer_irq = {
|
||||
.name = "AAEC-2000 Timer Tick",
|
||||
.flags = SA_INTERRUPT,
|
||||
.handler = aaec2000_timer_interrupt
|
||||
};
|
||||
|
||||
static void __init aaec2000_timer_init(void)
|
||||
{
|
||||
/* Disable timer 1 */
|
||||
TIMER1_CTRL = 0;
|
||||
|
||||
/* We have somehow to generate a 100Hz clock.
|
||||
* We then use the 508KHz timer in periodic mode.
|
||||
*/
|
||||
TIMER1_LOAD = LATCH;
|
||||
TIMER1_CLEAR = 1; /* Clear interrupt */
|
||||
|
||||
setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
|
||||
|
||||
TIMER1_CTRL = TIMER_CTRL_ENABLE |
|
||||
TIMER_CTRL_PERIODIC |
|
||||
TIMER_CTRL_CLKSEL_508K;
|
||||
}
|
||||
|
||||
struct sys_timer aaec2000_timer = {
|
||||
.init = aaec2000_timer_init,
|
||||
.offset = aaec2000_gettimeoffset,
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-aaec2000/core.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
struct sys_timer;
|
||||
|
||||
extern struct sys_timer aaec2000_timer;
|
||||
extern void __init aaec2000_map_io(void);
|
||||
extern void __init aaec2000_init_irq(void);
|
||||
|
|
@ -62,7 +62,7 @@ config CPU_ARM720T
|
|||
# ARM920T
|
||||
config CPU_ARM920T
|
||||
bool "Support ARM920T processor" if !ARCH_S3C2410
|
||||
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX
|
||||
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000
|
||||
default y if ARCH_S3C2410
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4T
|
||||
|
|
|
|||
|
|
@ -0,0 +1,151 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/aaec2000.h
|
||||
*
|
||||
* AAEC-2000 registers definition
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_AAEC2000_H
|
||||
#define __ASM_ARCH_AAEC2000_H
|
||||
|
||||
#ifndef __ASM_ARCH_HARDWARE_H
|
||||
#error You must include hardware.h not this file
|
||||
#endif /* __ASM_ARCH_HARDWARE_H */
|
||||
|
||||
/* Interrupt controller */
|
||||
#define IRQ_BASE __REG(0x80000500)
|
||||
#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
|
||||
#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
|
||||
#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
|
||||
#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */
|
||||
|
||||
/* UART 1 */
|
||||
#define UART1_BASE __REG(0x80000600)
|
||||
#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
|
||||
#define UART1_LCR __REG(0x80000604) /* Link Control Register */
|
||||
#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
|
||||
#define UART1_CR __REG(0x8000060c) /* Control Register */
|
||||
#define UART1_SR __REG(0x80000610) /* Status Register */
|
||||
#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
|
||||
#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
|
||||
#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */
|
||||
|
||||
/* UART 2 */
|
||||
#define UART2_BASE __REG(0x80000700)
|
||||
#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
|
||||
#define UART2_LCR __REG(0x80000704) /* Link Control Register */
|
||||
#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
|
||||
#define UART2_CR __REG(0x8000070c) /* Control Register */
|
||||
#define UART2_SR __REG(0x80000710) /* Status Register */
|
||||
#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
|
||||
#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
|
||||
#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */
|
||||
|
||||
/* UART 3 */
|
||||
#define UART3_BASE __REG(0x80000800)
|
||||
#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
|
||||
#define UART3_LCR __REG(0x80000804) /* Link Control Register */
|
||||
#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
|
||||
#define UART3_CR __REG(0x8000080c) /* Control Register */
|
||||
#define UART3_SR __REG(0x80000810) /* Status Register */
|
||||
#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
|
||||
#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
|
||||
#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */
|
||||
|
||||
/* These are used in some places */
|
||||
#define _UART1_BASE __PREG(UART1_BASE)
|
||||
#define _UART2_BASE __PREG(UART2_BASE)
|
||||
#define _UART3_BASE __PREG(UART3_BASE)
|
||||
|
||||
/* UART Registers Offsets */
|
||||
#define UART_DR 0x00
|
||||
#define UART_LCR 0x04
|
||||
#define UART_BRCR 0x08
|
||||
#define UART_CR 0x0c
|
||||
#define UART_SR 0x10
|
||||
#define UART_INT 0x14
|
||||
#define UART_INTM 0x18
|
||||
#define UART_INTRES 0x1c
|
||||
|
||||
/* UART_LCR Bitmask */
|
||||
#define UART_LCR_BRK (1 << 0) /* Send Break */
|
||||
#define UART_LCR_PEN (1 << 1) /* Parity Enable */
|
||||
#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
|
||||
#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
|
||||
#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
|
||||
#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
|
||||
#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
|
||||
#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
|
||||
#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */
|
||||
|
||||
/* UART_CR Bitmask */
|
||||
#define UART_CR_EN (1 << 0) /* UART Enable */
|
||||
#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
|
||||
#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
|
||||
#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
|
||||
#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
|
||||
#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
|
||||
#define UART_CR_LOOP (1 << 6) /* Loopback Mode */
|
||||
|
||||
/* UART_SR Bitmask */
|
||||
#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
|
||||
#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
|
||||
#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
|
||||
#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
|
||||
#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
|
||||
#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
|
||||
#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
|
||||
#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */
|
||||
|
||||
/* UART_INT Bitmask */
|
||||
#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
|
||||
#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
|
||||
#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
|
||||
#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */
|
||||
|
||||
/* Timer 1 */
|
||||
#define TIMER1_BASE __REG(0x80000c00)
|
||||
#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
|
||||
#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
|
||||
#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
|
||||
#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */
|
||||
|
||||
/* Timer 2 */
|
||||
#define TIMER2_BASE __REG(0x80000d00)
|
||||
#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
|
||||
#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
|
||||
#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
|
||||
#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */
|
||||
|
||||
/* Timer 3 */
|
||||
#define TIMER3_BASE __REG(0x80000e00)
|
||||
#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
|
||||
#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
|
||||
#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
|
||||
#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */
|
||||
|
||||
/* Timer Control register bits */
|
||||
#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start° Timer */
|
||||
#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
|
||||
#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
|
||||
#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
|
||||
#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/
|
||||
|
||||
/* Power and State Control */
|
||||
#define POWER_BASE __REG(0x80000400)
|
||||
#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
|
||||
#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
|
||||
#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
|
||||
#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
|
||||
#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
|
||||
#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
|
||||
#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
|
||||
#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
|
||||
#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */
|
||||
|
||||
#endif /* __ARM_ARCH_AAEC2000_H */
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
/* linux/include/asm-arm/arch-aaec2000/debug-macro.S
|
||||
*
|
||||
* Debugging macro include header
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
.macro addruart,rx
|
||||
mrc p15, 0, \rx, c1, c0
|
||||
tst \rx, #1 @ MMU enabled?
|
||||
moveq \rx, #0x80000000 @ physical
|
||||
movne \rx, #io_p2v(0x80000000) @ virtual
|
||||
orr \rx, \rx, #0x00000800
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
str \rd, [\rx, #0]
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldr \rd, [\rx, #0x10]
|
||||
tst \rd, #(1 << 7)
|
||||
beq 1002b
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
#if 0
|
||||
1001: ldr \rd, [\rx, #0x10]
|
||||
tst \rd, #(1 << 5)
|
||||
beq 1001b
|
||||
#endif
|
||||
.endm
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/dma.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_DMA_H
|
||||
#define __ASM_ARCH_DMA_H
|
||||
|
||||
#define MAX_DMA_ADDRESS 0xffffffff
|
||||
#define MAX_DMA_CHANNELS 0
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/entry-macro.S
|
||||
*
|
||||
* Low-level IRQ helper for aaec-2000 based platforms
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
.macro disable_fiq
|
||||
.endm
|
||||
|
||||
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
|
||||
mov r4, #0xf8000000
|
||||
add r4, r4, #0x00000500
|
||||
mov \base, r4
|
||||
ldr \irqstat, [\base, #0]
|
||||
cmp \irqstat, #0
|
||||
bne 1001f
|
||||
ldr \irqnr, =NR_IRQS+1
|
||||
b 1003f
|
||||
1001: mov \irqnr, #0
|
||||
1002: ands \tmp, \irqstat, #1
|
||||
mov \irqstat, \irqstat, LSR #1
|
||||
add \irqnr, \irqnr, #1
|
||||
beq 1002b
|
||||
sub \irqnr, \irqnr, #1
|
||||
1003:
|
||||
.endm
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/hardware.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_HARDWARE_H
|
||||
#define __ASM_ARCH_HARDWARE_H
|
||||
|
||||
#include <linux/config.h>
|
||||
|
||||
/* The kernel is loaded at physical address 0xf8000000.
|
||||
* We map the IO space a bit after
|
||||
*/
|
||||
#define PIO_APB_BASE 0x80000000
|
||||
#define VIO_APB_BASE 0xf8000000
|
||||
#define IO_APB_LENGTH 0x2000
|
||||
#define PIO_AHB_BASE 0x80002000
|
||||
#define VIO_AHB_BASE 0xf8002000
|
||||
#define IO_AHB_LENGTH 0x2000
|
||||
|
||||
#define VIO_BASE VIO_APB_BASE
|
||||
#define PIO_BASE PIO_APB_BASE
|
||||
|
||||
#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
|
||||
#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#include <asm/types.h>
|
||||
|
||||
/* FIXME: Is it needed to optimize this a la pxa ?? */
|
||||
#define __REG(x) (*((volatile u32 *)io_p2v(x)))
|
||||
#define __PREG(x) (io_v2p((u32)&(x)))
|
||||
|
||||
#else /* __ASSEMBLY__ */
|
||||
|
||||
#define __REG(x) io_p2v(x)
|
||||
#define __PREG(x) io_v2p(x)
|
||||
|
||||
#endif
|
||||
|
||||
#include "aaec2000.h"
|
||||
|
||||
#endif /* __ASM_ARCH_HARDWARE_H */
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/io.h
|
||||
*
|
||||
* Copied from asm/arch/sa1100/io.h
|
||||
*/
|
||||
#ifndef __ASM_ARM_ARCH_IO_H
|
||||
#define __ASM_ARM_ARCH_IO_H
|
||||
|
||||
#define IO_SPACE_LIMIT 0xffffffff
|
||||
|
||||
/*
|
||||
* We don't actually have real ISA nor PCI buses, but there is so many
|
||||
* drivers out there that might just work if we fake them...
|
||||
*/
|
||||
#define __io(a) ((void __iomem *)(a))
|
||||
#define __mem_pci(a) (a)
|
||||
#define __mem_isa(a) (a)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/irqs.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_IRQS_H
|
||||
#define __ASM_ARCH_IRQS_H
|
||||
|
||||
|
||||
#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */
|
||||
#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */
|
||||
#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */
|
||||
#define INT_MV_FIQ 3 /* Media Changed Interrupt */
|
||||
#define INT_SC 4 /* Sound Codec Interrupt */
|
||||
#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */
|
||||
#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */
|
||||
#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */
|
||||
#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */
|
||||
#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */
|
||||
#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */
|
||||
#define INT_TICK 11 /* 64Hz Tick Interrupt */
|
||||
#define INT_UART1 12 /* UART1 Interrupt */
|
||||
#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */
|
||||
#define INT_LCD 14 /* LCD Interrupt */
|
||||
#define INT_SSI 15 /* SSI End of Transfer Interrupt */
|
||||
#define INT_UART3 16 /* UART3 Interrupt */
|
||||
#define INT_SCI 17 /* SCI Interrupt */
|
||||
#define INT_AAC 18 /* Advanced Audio Codec Interrupt */
|
||||
#define INT_MMC 19 /* MMC Interrupt */
|
||||
#define INT_USB 20 /* USB Interrupt */
|
||||
#define INT_DMA 21 /* DMA Interrupt */
|
||||
#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */
|
||||
#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */
|
||||
#define INT_BMI 27 /* BMI Interrupt */
|
||||
|
||||
#define NR_IRQS (INT_BMI + 1)
|
||||
|
||||
#endif /* __ASM_ARCH_IRQS_H */
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/memory.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_MEMORY_H
|
||||
#define __ASM_ARCH_MEMORY_H
|
||||
|
||||
#include <linux/config.h>
|
||||
|
||||
#define PHYS_OFFSET (0xf0000000UL)
|
||||
|
||||
#define __virt_to_bus(x) __virt_to_phys(x)
|
||||
#define __bus_to_virt(x) __phys_to_virt(x)
|
||||
|
||||
#ifdef CONFIG_DISCONTIGMEM
|
||||
|
||||
/*
|
||||
* The nodes are the followings:
|
||||
*
|
||||
* node 0: 0xf000.0000 - 0xf3ff.ffff
|
||||
* node 1: 0xf400.0000 - 0xf7ff.ffff
|
||||
* node 2: 0xf800.0000 - 0xfbff.ffff
|
||||
* node 3: 0xfc00.0000 - 0xffff.ffff
|
||||
*/
|
||||
|
||||
/*
|
||||
* Given a kernel address, find the home node of the underlying memory.
|
||||
*/
|
||||
#define KVADDR_TO_NID(addr) \
|
||||
(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT)
|
||||
|
||||
/*
|
||||
* Given a page frame number, convert it to a node id.
|
||||
*/
|
||||
#define PFN_TO_NID(pfn) \
|
||||
(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT))
|
||||
|
||||
/*
|
||||
* Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
|
||||
* and return the mem_map of that node.
|
||||
*/
|
||||
#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
|
||||
|
||||
/*
|
||||
* Given a page frame number, find the owning node of the memory
|
||||
* and return the mem_map of that node.
|
||||
*/
|
||||
#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn))
|
||||
|
||||
/*
|
||||
* Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
|
||||
* and returns the index corresponding to the appropriate page in the
|
||||
* node's mem_map.
|
||||
*/
|
||||
#define LOCAL_MAP_NR(addr) \
|
||||
(((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT)
|
||||
|
||||
#define NODE_MAX_MEM_SHIFT 26
|
||||
#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT)
|
||||
|
||||
#else
|
||||
|
||||
#define PFN_TO_NID(addr) (0)
|
||||
|
||||
#endif /* CONFIG_DISCONTIGMEM */
|
||||
|
||||
#endif /* __ASM_ARCH_MEMORY_H */
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/param.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_PARAM_H
|
||||
#define __ASM_ARCH_PARAM_H
|
||||
|
||||
#endif /* __ASM_ARCH_PARAM_H */
|
||||
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaed2000/system.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_SYSTEM_H
|
||||
#define __ASM_ARCH_SYSTEM_H
|
||||
|
||||
static inline void arch_idle(void)
|
||||
{
|
||||
cpu_do_idle();
|
||||
}
|
||||
|
||||
static inline void arch_reset(char mode)
|
||||
{
|
||||
cpu_reset(0);
|
||||
}
|
||||
|
||||
#endif /* __ASM_ARCH_SYSTEM_H */
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/timex.h
|
||||
*
|
||||
* AAEC-2000 Architecture timex specification
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_TIMEX_H
|
||||
#define __ASM_ARCH_TIMEX_H
|
||||
|
||||
#define CLOCK_TICK_RATE 508000
|
||||
|
||||
#endif /* __ASM_ARCH_TIMEX_H */
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/uncompress.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_UNCOMPRESS_H
|
||||
#define __ASM_ARCH_UNCOMPRESS_H
|
||||
|
||||
#include "hardware.h"
|
||||
|
||||
#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
|
||||
|
||||
static void putstr( const char *s )
|
||||
{
|
||||
unsigned long serial_port;
|
||||
do {
|
||||
serial_port = _UART3_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
serial_port = _UART1_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
serial_port = _UART2_BASE;
|
||||
if (UART(UART_CR) & UART_CR_EN) break;
|
||||
return;
|
||||
} while (0);
|
||||
|
||||
for (; *s; s++) {
|
||||
/* wait for space in the UART's transmitter */
|
||||
while ((UART(UART_SR) & UART_SR_TxFF));
|
||||
/* send the character out. */
|
||||
UART(UART_DR) = *s;
|
||||
/* if a LF, also do CR... */
|
||||
if (*s == 10) {
|
||||
while ((UART(UART_SR) & UART_SR_TxFF));
|
||||
UART(UART_DR) = 13;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#define arch_decomp_setup()
|
||||
#define arch_decomp_wdog()
|
||||
|
||||
#endif /* __ASM_ARCH_UNCOMPRESS_H */
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
/*
|
||||
* linux/include/asm-arm/arch-aaec2000/vmalloc.h
|
||||
*
|
||||
* Copyright (c) 2005 Nicolas Bellido Y Ortega
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARCH_VMALLOC_H
|
||||
#define __ASM_ARCH_VMALLOC_H
|
||||
|
||||
#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
|
||||
|
||||
#endif /* __ASM_ARCH_VMALLOC_H */
|
||||
Загрузка…
Ссылка в новой задаче