drm/tegra: dc: Parameterize maximum resolution

Tegra186 and later support a higher maximum resolution than earlier
chips, so make sure to reflect that in the mode configuration.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drivers/gpu/drm/tegra/dc.c

@@ -2117,6 +2117,12 @@ static int tegra_dc_init(struct host1x_client *client)
 	if (dc->soc->pitch_align > tegra->pitch_align)
 		tegra->pitch_align = dc->soc->pitch_align;
 
+	/* track maximum resolution */
+	if (dc->soc->has_nvdisplay)
+		drm->mode_config.max_width = drm->mode_config.max_height = 16384;
+	else
+		drm->mode_config.max_width = drm->mode_config.max_height = 4096;
+
 	err = tegra_dc_rgb_init(drm, dc);
 	if (err < 0 && err != -ENODEV) {
 		dev_err(dc->dev, "failed to initialize RGB output: %d\n", err);

drivers/gpu/drm/tegra/drm.c

@@ -1121,9 +1121,8 @@ static int host1x_drm_probe(struct host1x_device *dev)
 
 	drm->mode_config.min_width = 0;
 	drm->mode_config.min_height = 0;
-
-	drm->mode_config.max_width = 4096;
-	drm->mode_config.max_height = 4096;
+	drm->mode_config.max_width = 0;
+	drm->mode_config.max_height = 0;
 
 	drm->mode_config.allow_fb_modifiers = true;
 
@@ -1142,6 +1141,14 @@ static int host1x_drm_probe(struct host1x_device *dev)
 	if (err < 0)
 		goto fbdev;
 
+	/*
+	 * Now that all display controller have been initialized, the maximum
+	 * supported resolution is known and the bitmask for horizontal and
+	 * vertical bitfields can be computed.
+	 */
+	tegra->hmask = drm->mode_config.max_width - 1;
+	tegra->vmask = drm->mode_config.max_height - 1;
+
 	if (tegra->use_explicit_iommu) {
 		u64 carveout_start, carveout_end, gem_start, gem_end;
 		u64 dma_mask = dma_get_mask(&dev->dev);

drivers/gpu/drm/tegra/drm.h

@@ -54,6 +54,7 @@ struct tegra_drm {
 	struct tegra_fbdev *fbdev;
 #endif
 
+	unsigned int hmask, vmask;
 	unsigned int pitch_align;
 
 	struct tegra_display_hub *hub;