diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 080e8a246faf..371f4e2aea6c 100644
--- a/drivers/video/fbdev/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -225,6 +225,15 @@ clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
 			var->blue.length = 4;
 		}
 		break;
+	case 24:
+		if (fb->vendor->packed_24_bit_pixels) {
+			var->red.length = 8;
+			var->green.length = 8;
+			var->blue.length = 8;
+		} else {
+			ret = -EINVAL;
+		}
+		break;
 	case 32:
 		/* If we can't do 888, reject */
 		caps &= CLCD_CAP_888;
@@ -311,6 +320,12 @@ static int clcdfb_set_par(struct fb_info *info)
 
 	clcdfb_disable(fb);
 
+	/* Some variants must be clocked here */
+	if (fb->vendor->clock_timregs && !fb->clk_enabled) {
+		fb->clk_enabled = true;
+		clk_enable(fb->clk);
+	}
+
 	writel(regs.tim0, fb->regs + CLCD_TIM0);
 	writel(regs.tim1, fb->regs + CLCD_TIM1);
 	writel(regs.tim2, fb->regs + CLCD_TIM2);
@@ -710,6 +725,42 @@ static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
 	if (r0 != 0 && b0 == 0)
 		fb->panel->bgr_connection = true;
 
+	if (fb->panel->caps && fb->vendor->st_bitmux_control) {
+		/*
+		 * Set up the special bits for the Nomadik control register
+		 * (other platforms tend to do this through an external
+		 * register).
+		 */
+
+		/* Offset of the highest used color */
+		int maxoff = max3(r0, g0, b0);
+		/* Most significant bit out, highest used bit */
+		int msb = 0;
+
+		if (fb->panel->caps & CLCD_CAP_888) {
+			msb = maxoff + 8 - 1;
+		} else if (fb->panel->caps & CLCD_CAP_565) {
+			msb = maxoff + 5 - 1;
+			fb->panel->cntl |= CNTL_ST_1XBPP_565;
+		} else if (fb->panel->caps & CLCD_CAP_5551) {
+			msb = maxoff + 5 - 1;
+			fb->panel->cntl |= CNTL_ST_1XBPP_5551;
+		} else if (fb->panel->caps & CLCD_CAP_444) {
+			msb = maxoff + 4 - 1;
+			fb->panel->cntl |= CNTL_ST_1XBPP_444;
+		}
+
+		/* Send out as many bits as we need */
+		if (msb > 17)
+			fb->panel->cntl |= CNTL_ST_CDWID_24;
+		else if (msb > 15)
+			fb->panel->cntl |= CNTL_ST_CDWID_18;
+		else if (msb > 11)
+			fb->panel->cntl |= CNTL_ST_CDWID_16;
+		else
+			fb->panel->cntl |= CNTL_ST_CDWID_12;
+	}
+
 	return fb->panel->caps ? 0 : -EINVAL;
 }
 
@@ -725,9 +776,21 @@ static int clcdfb_of_init_display(struct clcd_fb *fb)
 	if (!fb->panel)
 		return -ENOMEM;
 
-	endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
-	if (!endpoint)
-		return -ENODEV;
+	/*
+	 * Fetch the panel endpoint.
+	 */
+	if (!endpoint) {
+		endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node,
+						      NULL);
+		if (!endpoint)
+			return -ENODEV;
+	}
+
+	if (fb->vendor->init_panel) {
+		err = fb->vendor->init_panel(fb, endpoint);
+		if (err)
+			return err;
+	}
 
 	err = clcdfb_of_get_backlight(endpoint, fb->panel);
 	if (err)
@@ -764,11 +827,11 @@ static int clcdfb_of_init_display(struct clcd_fb *fb)
 
 	if (of_property_read_u32_array(endpoint,
 			"arm,pl11x,tft-r0g0b0-pads",
-			tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0)
-		return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
-				 tft_r0b0g0[1],  tft_r0b0g0[2]);
+			tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0)
+		return -ENOENT;
 
-	return -ENOENT;
+	return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
+					tft_r0b0g0[1],  tft_r0b0g0[2]);
 }
 
 static int clcdfb_of_vram_setup(struct clcd_fb *fb)
@@ -889,6 +952,7 @@ static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
 static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 {
 	struct clcd_board *board = dev_get_platdata(&dev->dev);
+	struct clcd_vendor_data *vendor = id->data;
 	struct clcd_fb *fb;
 	int ret;
 
@@ -898,6 +962,12 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 	if (!board)
 		return -EINVAL;
 
+	if (vendor->init_board) {
+		ret = vendor->init_board(dev, board);
+		if (ret)
+			return ret;
+	}
+
 	ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
 	if (ret)
 		goto out;
@@ -916,10 +986,11 @@ static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
 	}
 
 	fb->dev = dev;
+	fb->vendor = vendor;
 	fb->board = board;
 
-	dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n",
-		amba_part(dev), amba_rev(dev),
+	dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n",
+		amba_part(dev), amba_manf(dev), amba_rev(dev),
 		(unsigned long long)dev->res.start);
 
 	ret = fb->board->setup(fb);
@@ -962,10 +1033,27 @@ static int clcdfb_remove(struct amba_device *dev)
 	return 0;
 }
 
+static struct clcd_vendor_data vendor_arm = {
+	/* No special business */
+};
+
+static struct clcd_vendor_data vendor_nomadik = {
+	.clock_timregs = true,
+	.packed_24_bit_pixels = true,
+	.st_bitmux_control = true,
+};
+
 static struct amba_id clcdfb_id_table[] = {
 	{
 		.id	= 0x00041110,
 		.mask	= 0x000ffffe,
+		.data	= &vendor_arm,
+	},
+	/* ST Electronics Nomadik variant */
+	{
+		.id	= 0x00180110,
+		.mask	= 0x00fffffe,
+		.data	= &vendor_nomadik,
 	},
 	{ 0, 0 },
 };
diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
index 8b64ec0d574b..1035879b322c 100644
--- a/include/linux/amba/clcd.h
+++ b/include/linux/amba/clcd.h
@@ -67,6 +67,17 @@
 #define CNTL_LDMAFIFOTIME	(1 << 15)
 #define CNTL_WATERMARK		(1 << 16)
 
+/* ST Microelectronics variant bits */
+#define CNTL_ST_1XBPP_444	0x0
+#define CNTL_ST_1XBPP_5551	(1 << 17)
+#define CNTL_ST_1XBPP_565	(1 << 18)
+#define CNTL_ST_CDWID_12	0x0
+#define CNTL_ST_CDWID_16	(1 << 19)
+#define CNTL_ST_CDWID_18	(1 << 20)
+#define CNTL_ST_CDWID_24	((1 << 19)|(1 << 20))
+#define CNTL_ST_CEAEN		(1 << 21)
+#define CNTL_ST_LCDBPP24_PACKED	(6 << 1)
+
 enum {
 	/* individual formats */
 	CLCD_CAP_RGB444		= (1 << 0),
@@ -179,11 +190,38 @@ struct clcd_board {
 struct amba_device;
 struct clk;
 
+/**
+ * struct clcd_vendor_data - holds hardware (IP-block) vendor-specific
+ * variant information
+ *
+ * @clock_timregs: the CLCD needs to be clocked when accessing the
+ * timer registers, or the hardware will hang.
+ * @packed_24_bit_pixels: this variant supports 24bit packed pixel data,
+ * so that RGB accesses 3 bytes at a time, not just on even 32bit
+ * boundaries, packing the pixel data in memory. ST Microelectronics
+ * have this.
+ * @st_bitmux_control: ST Microelectronics have implemented output
+ * bit line multiplexing into the CLCD control register. This indicates
+ * that we need to use this.
+ * @init_board: custom board init function for this variant
+ * @init_panel: custom panel init function for this variant
+ */
+struct clcd_vendor_data {
+	bool	clock_timregs;
+	bool	packed_24_bit_pixels;
+	bool	st_bitmux_control;
+	int	(*init_board)(struct amba_device *adev,
+			      struct clcd_board *board);
+	int	(*init_panel)(struct clcd_fb *fb,
+			      struct device_node *panel);
+};
+
 /* this data structure describes each frame buffer device we find */
 struct clcd_fb {
 	struct fb_info		fb;
 	struct amba_device	*dev;
 	struct clk		*clk;
+	struct clcd_vendor_data	*vendor;
 	struct clcd_panel	*panel;
 	struct clcd_board	*board;
 	void			*board_data;
@@ -285,6 +323,10 @@ static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
 		else
 			val |= CNTL_LCDBPP16_444;
 		break;
+	case 24:
+		/* Modified variant supporting 24 bit packed pixels */
+		val |= CNTL_ST_LCDBPP24_PACKED;
+		break;
 	case 32:
 		val |= CNTL_LCDBPP24;
 		break;