[media] media: ov7670: add possibility to bypass pll for ov7675

For a frame rate of 30 fps a pixclk of 24MHz is needed. For those
cases where the ov7670 has a clean 24MHz input (xvclk) the PLL
can be bypassed.
This will result in a value of clkrc of 1, which means that in practice
pixclk = xvclk (input clock)

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Javier Martin 2013-01-29 07:23:42 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель f6dd927f34
Коммит 04ee6d9204
2 изменённых файлов: 27 добавлений и 2 удалений

Просмотреть файл

@ -230,6 +230,7 @@ struct ov7670_info {
int clock_speed; /* External clock speed (MHz) */
u8 clkrc; /* Clock divider value */
bool use_smbus; /* Use smbus I/O instead of I2C */
bool pll_bypass;
const struct ov7670_devtype *devtype; /* Device specifics */
};
@ -755,7 +756,12 @@ static void ov7675_get_framerate(struct v4l2_subdev *sd,
{
struct ov7670_info *info = to_state(sd);
u32 clkrc = info->clkrc;
u32 pll_factor = PLL_FACTOR;
int pll_factor;
if (info->pll_bypass)
pll_factor = 1;
else
pll_factor = PLL_FACTOR;
clkrc++;
if (info->fmt->mbus_code == V4L2_MBUS_FMT_SBGGR8_1X8)
@ -771,7 +777,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
{
struct ov7670_info *info = to_state(sd);
u32 clkrc;
u32 pll_factor = PLL_FACTOR;
int pll_factor;
int ret;
/*
@ -781,6 +787,16 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
* pixclk = clock_speed / (clkrc + 1) * PLLfactor
*
*/
if (info->pll_bypass) {
pll_factor = 1;
ret = ov7670_write(sd, REG_DBLV, DBLV_BYPASS);
} else {
pll_factor = PLL_FACTOR;
ret = ov7670_write(sd, REG_DBLV, DBLV_X4);
}
if (ret < 0)
return ret;
if (tpf->numerator == 0 || tpf->denominator == 0) {
clkrc = 0;
} else {
@ -808,6 +824,7 @@ static int ov7675_set_framerate(struct v4l2_subdev *sd,
ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
if (ret < 0)
return ret;
return ov7670_write(sd, REG_DBLV, DBLV_X4);
}
@ -1688,6 +1705,13 @@ static int ov7670_probe(struct i2c_client *client,
if (config->clock_speed)
info->clock_speed = config->clock_speed;
/*
* It should be allowed for ov7670 too when it is migrated to
* the new frame rate formula.
*/
if (config->pll_bypass && id->driver_data != MODEL_OV7670)
info->pll_bypass = true;
}
/* Make sure it's an ov7670 */

Просмотреть файл

@ -15,6 +15,7 @@ struct ov7670_config {
int min_height; /* Filter out smaller sizes */
int clock_speed; /* External clock speed (MHz) */
bool use_smbus; /* Use smbus I/O instead of I2C */
bool pll_bypass; /* Choose whether to bypass the PLL */
};
#endif