From 053191b6a4bc2d429e94e866e3b2bc611d5add31 Mon Sep 17 00:00:00 2001 From: Mark Pearson Date: Thu, 11 Mar 2021 12:48:43 -0500 Subject: [PATCH] platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs Lenovo platforms with DYTC versions earlier than version 5 don't set the lapmode interface correctly, causing issues with thermald on older platforms. Add checking to only create the dytc_lapmode interface for version 5 and later. Fixes: 1ac09656bded ("platform/x86: thinkpad_acpi: Add palm sensor support") Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20210311174843.3161-1-markpearson@lenovo.com Signed-off-by: Hans de Goede --- drivers/platform/x86/thinkpad_acpi.c | 91 ++++++++++++++++++++-------- 1 file changed, 65 insertions(+), 26 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index b881044b31b0..f7de90a47e28 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -9845,6 +9845,11 @@ static struct ibm_struct lcdshadow_driver_data = { * Thinkpad sensor interfaces */ +#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ +#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ +#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ +#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ + #define DYTC_CMD_GET 2 /* To get current IC function and mode */ #define DYTC_GET_LAPMODE_BIT 17 /* Set when in lapmode */ @@ -9855,6 +9860,7 @@ static bool has_palmsensor; static bool has_lapsensor; static bool palm_state; static bool lap_state; +static int dytc_version; static int dytc_command(int command, int *output) { @@ -9869,6 +9875,33 @@ static int dytc_command(int command, int *output) return 0; } +static int dytc_get_version(void) +{ + int err, output; + + /* Check if we've been called before - and just return cached value */ + if (dytc_version) + return dytc_version; + + /* Otherwise query DYTC and extract version information */ + err = dytc_command(DYTC_CMD_QUERY, &output); + /* + * If support isn't available (ENODEV) then don't return an error + * and don't create the sysfs group + */ + if (err == -ENODEV) + return 0; + /* For all other errors we can flag the failure */ + if (err) + return err; + + /* Check DYTC is enabled and supports mode setting */ + if (output & BIT(DYTC_QUERY_ENABLE_BIT)) + dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; + + return 0; +} + static int lapsensor_get(bool *present, bool *state) { int output, err; @@ -9974,7 +10007,18 @@ static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm) if (err) return err; } - if (has_lapsensor) { + + /* Check if we know the DYTC version, if we don't then get it */ + if (!dytc_version) { + err = dytc_get_version(); + if (err) + return err; + } + /* + * Platforms before DYTC version 5 claim to have a lap sensor, but it doesn't work, so we + * ignore them + */ + if (has_lapsensor && (dytc_version >= 5)) { err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr); if (err) return err; @@ -9999,14 +10043,9 @@ static struct ibm_struct proxsensor_driver_data = { * DYTC Platform Profile interface */ -#define DYTC_CMD_QUERY 0 /* To get DYTC status - enable/revision */ #define DYTC_CMD_SET 1 /* To enable/disable IC function mode */ #define DYTC_CMD_RESET 0x1ff /* To reset back to default */ -#define DYTC_QUERY_ENABLE_BIT 8 /* Bit 8 - 0 = disabled, 1 = enabled */ -#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */ -#define DYTC_QUERY_REV_BIT 28 /* Bits 28 - 31 - revision */ - #define DYTC_GET_FUNCTION_BIT 8 /* Bits 8-11 - function setting */ #define DYTC_GET_MODE_BIT 12 /* Bits 12-15 - mode setting */ @@ -10211,28 +10250,28 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm) if (err) return err; + /* Check if we know the DYTC version, if we don't then get it */ + if (!dytc_version) { + err = dytc_get_version(); + if (err) + return err; + } /* Check DYTC is enabled and supports mode setting */ - if (output & BIT(DYTC_QUERY_ENABLE_BIT)) { - /* Only DYTC v5.0 and later has this feature. */ - int dytc_version; + if (dytc_version >= 5) { + dbg_printk(TPACPI_DBG_INIT, + "DYTC version %d: thermal mode available\n", dytc_version); + /* Create platform_profile structure and register */ + err = platform_profile_register(&dytc_profile); + /* + * If for some reason platform_profiles aren't enabled + * don't quit terminally. + */ + if (err) + return 0; - dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF; - if (dytc_version >= 5) { - dbg_printk(TPACPI_DBG_INIT, - "DYTC version %d: thermal mode available\n", dytc_version); - /* Create platform_profile structure and register */ - err = platform_profile_register(&dytc_profile); - /* - * If for some reason platform_profiles aren't enabled - * don't quit terminally. - */ - if (err) - return 0; - - dytc_profile_available = true; - /* Ensure initial values are correct */ - dytc_profile_refresh(); - } + dytc_profile_available = true; + /* Ensure initial values are correct */ + dytc_profile_refresh(); } return 0; }