ARM: S3C2443: Implement GPIO pull-up/down configuration methods

S3C2443 has two-bits pull-up/pull-down configuration fields in GPIO
registers, but values are differ from other SoCs with two-bits
configuration. gpio-cfg-helpers.h already has prototypes for
s3c2443-style pull-up/down methods, so implement them.

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Yauhen Kharuzhy 2011-01-06 13:04:33 +09:00 коммит произвёл Kukjin Kim
Родитель 479c4f4aba
Коммит 0536d0d087
5 изменённых файлов: 57 добавлений и 1 удалений

Просмотреть файл

@ -10,6 +10,7 @@ config CPU_S3C2443
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
select S3C_GPIO_PULL_S3C2443
help
Support for the S3C2443 SoC from the S3C24XX line

Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
@ -32,6 +33,9 @@
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@ -86,6 +90,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
void __init s3c2443_map_io(void)
{
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}

Просмотреть файл

@ -95,6 +95,12 @@ config S3C_GPIO_PULL_UPDOWN
help
Internal configuration to enable the correct GPIO pull helper
config S3C_GPIO_PULL_S3C2443
bool
select S3C_GPIO_PULL_UPDOWN
help
Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
config S3C_GPIO_PULL_DOWN
bool
help

Просмотреть файл

@ -278,6 +278,48 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
pup &= 0x3;
return (__force s3c_gpio_pull_t)pup;
}
#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
switch (pull) {
case S3C_GPIO_PULL_NONE:
pull = 0x01;
break;
case S3C_GPIO_PULL_UP:
pull = 0x00;
break;
case S3C_GPIO_PULL_DOWN:
pull = 0x02;
break;
}
return s3c_gpio_setpull_updown(chip, off, pull);
}
s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off)
{
s3c_gpio_pull_t pull;
pull = s3c_gpio_getpull_updown(chip, off);
switch (pull) {
case 0x00:
pull = S3C_GPIO_PULL_UP;
break;
case 0x01:
case 0x03:
pull = S3C_GPIO_PULL_NONE;
break;
case 0x02:
pull = S3C_GPIO_PULL_DOWN;
break;
}
return pull;
}
#endif
#endif
#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)

Просмотреть файл

@ -244,7 +244,7 @@ extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
* This helper function reads the state of the pull-{up,down} resistor for the
* given GPIO in the same case as s3c_gpio_setpull_upown.
*/
extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off);
#endif /* __PLAT_GPIO_CFG_HELPERS_H */