staging: sm750fb: merge sm750_hw.h into sm750.h

There is no actual need to split type definitions and global function
declarations between lots of small headers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/sm750fb/sm750.c

@@ -18,7 +18,6 @@
 #include <linux/console.h>
 #include <asm/fb.h>
 #include "sm750.h"
-#include "sm750_hw.h"
 #include "sm750_accel.h"
 #include "sm750_cursor.h"
 

drivers/staging/sm750fb/sm750.h

@@ -1,12 +1,61 @@
 #ifndef LYNXDRV_H_
 #define LYNXDRV_H_
 
-
-
 #define FB_ACCEL_SMI 0xab
 
 #define MHZ(x) ((x) * 1000000)
 
+#define DEFAULT_SM750_CHIP_CLOCK	290
+#define DEFAULT_SM750LE_CHIP_CLOCK	333
+#ifndef SM750LE_REVISION_ID
+#define SM750LE_REVISION_ID ((unsigned char)0xfe)
+#endif
+
+enum sm750_pnltype {
+	sm750_24TFT = 0,	/* 24bit tft */
+	sm750_dualTFT = 2,	/* dual 18 bit tft */
+	sm750_doubleTFT = 1,	/* 36 bit double pixel tft */
+};
+
+/* vga channel is not concerned  */
+enum sm750_dataflow {
+	sm750_simul_pri,	/* primary => all head */
+	sm750_simul_sec,	/* secondary => all head */
+	sm750_dual_normal,	/* primary => panel head and secondary => crt */
+	sm750_dual_swap,	/* primary => crt head and secondary => panel */
+};
+
+enum sm750_channel {
+	sm750_primary = 0,
+	/* enum value equal to the register filed data */
+	sm750_secondary = 1,
+};
+
+enum sm750_path {
+	sm750_panel = 1,
+	sm750_crt = 2,
+	sm750_pnc = 3,	/* panel and crt */
+};
+
+struct init_status {
+	ushort powerMode;
+	/* below three clocks are in unit of MHZ*/
+	ushort chip_clk;
+	ushort mem_clk;
+	ushort master_clk;
+	ushort setAllEngOff;
+	ushort resetMemory;
+};
+
+struct sm750_state {
+	struct init_status initParm;
+	enum sm750_pnltype pnltype;
+	enum sm750_dataflow dataflow;
+	int nocrt;
+	int xLCD;
+	int yLCD;
+};
+
 struct lynx_accel {
 	/* base virtual address of DPR registers */
 	volatile unsigned char __iomem *dprBase;
@@ -58,6 +107,23 @@ struct lynx_share {
 	spinlock_t slock;
 };
 
+/*
+ * sm750_share stands for a presentation of two frame buffer
+ * that use one sm750 adaptor
+ */
+struct sm750_share {
+	struct lynx_share share;
+	struct sm750_state state;
+
+	/*
+	 * 0: no hardware cursor
+	 * 1: primary crtc hw cursor enabled,
+	 * 2: secondary crtc hw cursor enabled
+	 * 3: both ctrc hw cursor enabled
+	 */
+	int hwCursor;
+};
+
 struct lynx_cursor {
 	/* cursor width ,height and size */
 	int w;
@@ -133,5 +199,23 @@ static inline unsigned long ps_to_hz(unsigned int psvalue)
 	return (unsigned long)numerator;
 }
 
+int hw_sm750_map(struct lynx_share *share, struct pci_dev *pdev);
+int hw_sm750_inithw(struct lynx_share*, struct pci_dev *);
+void hw_sm750_initAccel(struct lynx_share *);
+int hw_sm750_deWait(void);
+int hw_sm750le_deWait(void);
+
+resource_size_t hw_sm750_getVMSize(struct lynx_share *);
+int hw_sm750_output_setMode(struct lynxfb_output*, struct fb_var_screeninfo*,
+			    struct fb_fix_screeninfo*);
+int hw_sm750_crtc_checkMode(struct lynxfb_crtc*, struct fb_var_screeninfo*);
+int hw_sm750_crtc_setMode(struct lynxfb_crtc*, struct fb_var_screeninfo*,
+			  struct fb_fix_screeninfo*);
+int hw_sm750_setColReg(struct lynxfb_crtc*, ushort, ushort, ushort, ushort);
+int hw_sm750_setBLANK(struct lynxfb_output*, int);
+int hw_sm750le_setBLANK(struct lynxfb_output*, int);
+int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
+			 const struct fb_var_screeninfo *var,
+			 const struct fb_info *info);
 
 #endif

drivers/staging/sm750fb/sm750_hw.c

@@ -21,7 +21,6 @@
 #include <linux/sizes.h>
 
 #include "sm750.h"
-#include "sm750_hw.h"
 #include "ddk750.h"
 #include "sm750_accel.h"
 

drivers/staging/sm750fb/sm750_hw.h

@@ -1,98 +0,0 @@
-#ifndef LYNX_HW750_H__
-#define LYNX_HW750_H__
-
-
-#define DEFAULT_SM750_CHIP_CLOCK	290
-#define DEFAULT_SM750LE_CHIP_CLOCK	333
-#ifndef SM750LE_REVISION_ID
-#define SM750LE_REVISION_ID (unsigned char)0xfe
-#endif
-
-
-enum sm750_pnltype {
-
-	sm750_24TFT = 0,/* 24bit tft */
-
-	sm750_dualTFT = 2,/* dual 18 bit tft */
-
-	sm750_doubleTFT = 1,/* 36 bit double pixel tft */
-};
-
-/* vga channel is not concerned  */
-enum sm750_dataflow {
-	sm750_simul_pri,/* primary => all head */
-
-	sm750_simul_sec,/* secondary => all head */
-
-	sm750_dual_normal,/* primary => panel head and secondary => crt */
-
-	sm750_dual_swap,/* primary => crt head and secondary => panel */
-};
-
-
-enum sm750_channel {
-	sm750_primary = 0,
-	/* enum value equal to the register filed data */
-	sm750_secondary = 1,
-};
-
-enum sm750_path {
-	sm750_panel = 1,
-	sm750_crt = 2,
-	sm750_pnc = 3,/* panel and crt */
-};
-
-struct init_status {
-	ushort powerMode;
-	/* below three clocks are in unit of MHZ*/
-	ushort chip_clk;
-	ushort mem_clk;
-	ushort master_clk;
-	ushort setAllEngOff;
-	ushort resetMemory;
-};
-
-struct sm750_state {
-	struct init_status initParm;
-	enum sm750_pnltype pnltype;
-	enum sm750_dataflow dataflow;
-	int nocrt;
-	int xLCD;
-	int yLCD;
-};
-
-/* sm750_share stands for a presentation of two frame buffer
-   that use one sm750 adaptor, it is similar to the super class of lynx_share
-   in C++
- */
-
-struct sm750_share {
-	/* it's better to put lynx_share struct to the first place of sm750_share */
-	struct lynx_share share;
-	struct sm750_state state;
-	int hwCursor;
-	/* 0: no hardware cursor
-	   1: primary crtc hw cursor enabled,
-	   2: secondary crtc hw cursor enabled
-	   3: both ctrc hw cursor enabled
-	*/
-};
-
-int hw_sm750_map(struct lynx_share *share, struct pci_dev *pdev);
-int hw_sm750_inithw(struct lynx_share*, struct pci_dev *);
-void hw_sm750_initAccel(struct lynx_share *);
-int hw_sm750_deWait(void);
-int hw_sm750le_deWait(void);
-
-resource_size_t hw_sm750_getVMSize(struct lynx_share *);
-int hw_sm750_output_setMode(struct lynxfb_output*, struct fb_var_screeninfo*, struct fb_fix_screeninfo*);
-int hw_sm750_crtc_checkMode(struct lynxfb_crtc*, struct fb_var_screeninfo*);
-int hw_sm750_crtc_setMode(struct lynxfb_crtc*, struct fb_var_screeninfo*, struct fb_fix_screeninfo*);
-int hw_sm750_setColReg(struct lynxfb_crtc*, ushort, ushort, ushort, ushort);
-int hw_sm750_setBLANK(struct lynxfb_output*, int);
-int hw_sm750le_setBLANK(struct lynxfb_output*, int);
-int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
-			 const struct fb_var_screeninfo *var,
-			 const struct fb_info *info);
-
-#endif