[PATCH] hwmon: Sysfs interface documentation update, 1 of 2
This patch cleans up hwmon sysfs documentation file, plus introduces the description of DC/PWM selection for fan speed control. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Rudolf Marek
Greg Kroah-Hartman
Родитель
18f98b1e31
Коммит
057bc35099
|
|
@ -69,28 +69,37 @@ to cause an alarm) is chip-dependent.
|
|||
|
||||
-------------------------------------------------------------------------
|
||||
|
||||
[0-*] denotes any positive number starting from 0
|
||||
[1-*] denotes any positive number starting from 1
|
||||
RO read only value
|
||||
RW read/write value
|
||||
|
||||
Read/write values may be read-only for some chips, depending on the
|
||||
hardware implementation.
|
||||
|
||||
************
|
||||
* Voltages *
|
||||
************
|
||||
|
||||
in[0-8]_min Voltage min value.
|
||||
in[0-*]_min Voltage min value.
|
||||
Unit: millivolt
|
||||
Read/Write
|
||||
RW
|
||||
|
||||
in[0-8]_max Voltage max value.
|
||||
in[0-*]_max Voltage max value.
|
||||
Unit: millivolt
|
||||
Read/Write
|
||||
RW
|
||||
|
||||
in[0-8]_input Voltage input value.
|
||||
in[0-*]_input Voltage input value.
|
||||
Unit: millivolt
|
||||
Read only
|
||||
RO
|
||||
Voltage measured on the chip pin.
|
||||
Actual voltage depends on the scaling resistors on the
|
||||
motherboard, as recommended in the chip datasheet.
|
||||
This varies by chip and by motherboard.
|
||||
Because of this variation, values are generally NOT scaled
|
||||
by the chip driver, and must be done by the application.
|
||||
However, some drivers (notably lm87 and via686a)
|
||||
do scale, with various degrees of success.
|
||||
do scale, because of internal resistors built into a chip.
|
||||
These drivers will output the actual voltage.
|
||||
|
||||
Typical usage:
|
||||
|
|
@ -104,58 +113,72 @@ in[0-8]_input Voltage input value.
|
|||
in7_* varies
|
||||
in8_* varies
|
||||
|
||||
cpu[0-1]_vid CPU core reference voltage.
|
||||
cpu[0-*]_vid CPU core reference voltage.
|
||||
Unit: millivolt
|
||||
Read only.
|
||||
RO
|
||||
Not always correct.
|
||||
|
||||
vrm Voltage Regulator Module version number.
|
||||
Read only.
|
||||
Two digit number, first is major version, second is
|
||||
minor version.
|
||||
RW (but changing it should no more be necessary)
|
||||
Originally the VRM standard version multiplied by 10, but now
|
||||
an arbitrary number, as not all standards have a version
|
||||
number.
|
||||
Affects the way the driver calculates the CPU core reference
|
||||
voltage from the vid pins.
|
||||
|
||||
Also see the Alarms section for status flags associated with voltages.
|
||||
|
||||
|
||||
********
|
||||
* Fans *
|
||||
********
|
||||
|
||||
fan[1-3]_min Fan minimum value
|
||||
fan[1-*]_min Fan minimum value
|
||||
Unit: revolution/min (RPM)
|
||||
Read/Write.
|
||||
RW
|
||||
|
||||
fan[1-3]_input Fan input value.
|
||||
fan[1-*]_input Fan input value.
|
||||
Unit: revolution/min (RPM)
|
||||
Read only.
|
||||
RO
|
||||
|
||||
fan[1-3]_div Fan divisor.
|
||||
fan[1-*]_div Fan divisor.
|
||||
Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128).
|
||||
RW
|
||||
Some chips only support values 1, 2, 4 and 8.
|
||||
Note that this is actually an internal clock divisor, which
|
||||
affects the measurable speed range, not the read value.
|
||||
|
||||
Also see the Alarms section for status flags associated with fans.
|
||||
|
||||
|
||||
*******
|
||||
* PWM *
|
||||
*******
|
||||
|
||||
pwm[1-3] Pulse width modulation fan control.
|
||||
pwm[1-*] Pulse width modulation fan control.
|
||||
Integer value in the range 0 to 255
|
||||
Read/Write
|
||||
RW
|
||||
255 is max or 100%.
|
||||
|
||||
pwm[1-3]_enable
|
||||
pwm[1-*]_enable
|
||||
Switch PWM on and off.
|
||||
Not always present even if fan*_pwm is.
|
||||
0 to turn off
|
||||
1 to turn on in manual mode
|
||||
2 to turn on in automatic mode
|
||||
Read/Write
|
||||
0: turn off
|
||||
1: turn on in manual mode
|
||||
2+: turn on in automatic mode
|
||||
Check individual chip documentation files for automatic mode details.
|
||||
RW
|
||||
|
||||
pwm[1-*]_mode
|
||||
0: DC mode
|
||||
1: PWM mode
|
||||
RW
|
||||
|
||||
pwm[1-*]_auto_channels_temp
|
||||
Select which temperature channels affect this PWM output in
|
||||
auto mode. Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc...
|
||||
Which values are possible depend on the chip used.
|
||||
RW
|
||||
|
||||
pwm[1-*]_auto_point[1-*]_pwm
|
||||
pwm[1-*]_auto_point[1-*]_temp
|
||||
|
|
@ -163,6 +186,7 @@ pwm[1-*]_auto_point[1-*]_temp_hyst
|
|||
Define the PWM vs temperature curve. Number of trip points is
|
||||
chip-dependent. Use this for chips which associate trip points
|
||||
to PWM output channels.
|
||||
RW
|
||||
|
||||
OR
|
||||
|
||||
|
|
@ -172,51 +196,52 @@ temp[1-*]_auto_point[1-*]_temp_hyst
|
|||
Define the PWM vs temperature curve. Number of trip points is
|
||||
chip-dependent. Use this for chips which associate trip points
|
||||
to temperature channels.
|
||||
RW
|
||||
|
||||
|
||||
****************
|
||||
* Temperatures *
|
||||
****************
|
||||
|
||||
temp[1-3]_type Sensor type selection.
|
||||
temp[1-*]_type Sensor type selection.
|
||||
Integers 1 to 4 or thermistor Beta value (typically 3435)
|
||||
Read/Write.
|
||||
RW
|
||||
1: PII/Celeron Diode
|
||||
2: 3904 transistor
|
||||
3: thermal diode
|
||||
4: thermistor (default/unknown Beta)
|
||||
Not all types are supported by all chips
|
||||
|
||||
temp[1-4]_max Temperature max value.
|
||||
temp[1-*]_max Temperature max value.
|
||||
Unit: millidegree Celcius
|
||||
Read/Write value.
|
||||
RW
|
||||
|
||||
temp[1-3]_min Temperature min value.
|
||||
temp[1-*]_min Temperature min value.
|
||||
Unit: millidegree Celcius
|
||||
Read/Write value.
|
||||
RW
|
||||
|
||||
temp[1-3]_max_hyst
|
||||
temp[1-*]_max_hyst
|
||||
Temperature hysteresis value for max limit.
|
||||
Unit: millidegree Celcius
|
||||
Must be reported as an absolute temperature, NOT a delta
|
||||
from the max value.
|
||||
Read/Write value.
|
||||
RW
|
||||
|
||||
temp[1-4]_input Temperature input value.
|
||||
temp[1-*]_input Temperature input value.
|
||||
Unit: millidegree Celcius
|
||||
Read only value.
|
||||
RO
|
||||
|
||||
temp[1-4]_crit Temperature critical value, typically greater than
|
||||
temp[1-*]_crit Temperature critical value, typically greater than
|
||||
corresponding temp_max values.
|
||||
Unit: millidegree Celcius
|
||||
Read/Write value.
|
||||
RW
|
||||
|
||||
temp[1-2]_crit_hyst
|
||||
temp[1-*]_crit_hyst
|
||||
Temperature hysteresis value for critical limit.
|
||||
Unit: millidegree Celcius
|
||||
Must be reported as an absolute temperature, NOT a delta
|
||||
from the critical value.
|
||||
Read/Write value.
|
||||
RW
|
||||
|
||||
temp[1-4]_offset
|
||||
Temperature offset which is added to the temperature reading
|
||||
|
|
@ -231,6 +256,8 @@ temp[1-4]_offset
|
|||
itself, for example the thermal diode inside the CPU or
|
||||
a thermistor nearby.
|
||||
|
||||
Also see the Alarms section for status flags associated with temperatures.
|
||||
|
||||
|
||||
************
|
||||
* Currents *
|
||||
|
|
@ -239,17 +266,17 @@ temp[1-4]_offset
|
|||
Note that no known chip provides current measurements as of writing,
|
||||
so this part is theoretical, so to say.
|
||||
|
||||
curr[1-n]_max Current max value
|
||||
curr[1-*]_max Current max value
|
||||
Unit: milliampere
|
||||
Read/Write.
|
||||
RW
|
||||
|
||||
curr[1-n]_min Current min value.
|
||||
curr[1-*]_min Current min value.
|
||||
Unit: milliampere
|
||||
Read/Write.
|
||||
RW
|
||||
|
||||
curr[1-n]_input Current input value
|
||||
curr[1-*]_input Current input value
|
||||
Unit: milliampere
|
||||
Read only.
|
||||
RO
|
||||
|
||||
|
||||
**********
|
||||
|
|
@ -263,50 +290,54 @@ Usually a given chip will either use channel-related alarms, or
|
|||
limit-related alarms, not both. The driver should just reflect the hardware
|
||||
implementation.
|
||||
|
||||
in[0-n]_alarm
|
||||
fan[1-n]_alarm
|
||||
temp[1-n]_alarm
|
||||
in[0-*]_alarm
|
||||
fan[1-*]_alarm
|
||||
temp[1-*]_alarm
|
||||
Channel alarm
|
||||
Boolean
|
||||
Read-only
|
||||
0: no alarm
|
||||
1: alarm
|
||||
RO
|
||||
|
||||
OR
|
||||
|
||||
in[0-n]_min_alarm
|
||||
in[0-n]_max_alarm
|
||||
fan[1-n]_min_alarm
|
||||
temp[1-n]_min_alarm
|
||||
temp[1-n]_max_alarm
|
||||
temp[1-n]_crit_alarm
|
||||
in[0-*]_min_alarm
|
||||
in[0-*]_max_alarm
|
||||
fan[1-*]_min_alarm
|
||||
temp[1-*]_min_alarm
|
||||
temp[1-*]_max_alarm
|
||||
temp[1-*]_crit_alarm
|
||||
Limit alarm
|
||||
Boolean
|
||||
Read-only
|
||||
0: no alarm
|
||||
1: alarm
|
||||
RO
|
||||
|
||||
Each input channel may have an associated fault file. This can be used
|
||||
to notify open diodes, unconnected fans etc. where the hardware
|
||||
supports it. When this boolean has value 1, the measurement for that
|
||||
channel should not be trusted.
|
||||
|
||||
in[0-n]_input_fault
|
||||
fan[1-n]_input_fault
|
||||
temp[1-n]_input_fault
|
||||
in[0-*]_input_fault
|
||||
fan[1-*]_input_fault
|
||||
temp[1-*]_input_fault
|
||||
Input fault condition
|
||||
Boolean
|
||||
Read-only
|
||||
0: no fault occured
|
||||
1: fault condition
|
||||
RO
|
||||
|
||||
Some chips also offer the possibility to get beeped when an alarm occurs:
|
||||
|
||||
beep_enable Master beep enable
|
||||
Boolean
|
||||
Read/Write
|
||||
0: no beeps
|
||||
1: beeps
|
||||
RW
|
||||
|
||||
in[0-n]_beep
|
||||
fan[1-n]_beep
|
||||
temp[1-n]_beep
|
||||
in[0-*]_beep
|
||||
fan[1-*]_beep
|
||||
temp[1-*]_beep
|
||||
Channel beep
|
||||
0 to disable.
|
||||
1 to enable.
|
||||
Read/write
|
||||
0: disable
|
||||
1: enable
|
||||
RW
|
||||
|
||||
In theory, a chip could provide per-limit beep masking, but no such chip
|
||||
was seen so far.
|
||||
|
|
@ -316,7 +347,7 @@ beeps. These interface files are deprecated, but will be kept around
|
|||
for compatibility reasons:
|
||||
|
||||
alarms Alarm bitmask.
|
||||
Read only.
|
||||
RO
|
||||
Integer representation of one to four bytes.
|
||||
A '1' bit means an alarm.
|
||||
Chips should be programmed for 'comparator' mode so that
|
||||
|
|
@ -333,7 +364,7 @@ beep_mask Bitmask for beep.
|
|||
Same format as 'alarms' with the same bit locations,
|
||||
use discouraged for the same reason. Use individual
|
||||
*_beep files instead.
|
||||
Read/Write
|
||||
RW
|
||||
|
||||
|
||||
*********
|
||||
|
|
@ -341,7 +372,9 @@ beep_mask Bitmask for beep.
|
|||
*********
|
||||
|
||||
eeprom Raw EEPROM data in binary form.
|
||||
Read only.
|
||||
RO
|
||||
|
||||
pec Enable or disable PEC (SMBus only)
|
||||
Read/Write
|
||||
0: disable
|
||||
1: enable
|
||||
RW
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче