From 058d42563a5692a4e663df0dc270f4ffd2c70274 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Mon, 9 Dec 2019 11:56:25 +0800 Subject: [PATCH] power: supply: sc27xx: Calibrate the resistance of coulomb counter There are some deviations between the real resistance and the ideal resistance of coulomb counter, which will affect the accuracy of the coulomb counter, thus calibrate the real resistance of coulomb counter to improve the accuracy. Signed-off-by: Baolin Wang Signed-off-by: Baolin Wang Signed-off-by: Sebastian Reichel --- drivers/power/supply/sc27xx_fuel_gauge.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c index 221b6fb31332..469c83fdaa8e 100644 --- a/drivers/power/supply/sc27xx_fuel_gauge.c +++ b/drivers/power/supply/sc27xx_fuel_gauge.c @@ -62,6 +62,8 @@ #define SC27XX_FGU_CUR_BASIC_ADC 8192 #define SC27XX_FGU_SAMPLE_HZ 2 +/* micro Ohms */ +#define SC27XX_FGU_IDEAL_RESISTANCE 20000 /* * struct sc27xx_fgu_data: describe the FGU device @@ -84,6 +86,7 @@ * @resist_table_len: the resistance table length * @cur_1000ma_adc: ADC value corresponding to 1000 mA * @vol_1000mv_adc: ADC value corresponding to 1000 mV + * @calib_resist: the real resistance of coulomb counter chip in uOhm * @cap_table: capacity table with corresponding ocv * @resist_table: resistance percent table with corresponding temperature */ @@ -108,6 +111,7 @@ struct sc27xx_fgu_data { int resist_table_len; int cur_1000ma_adc; int vol_1000mv_adc; + int calib_resist; struct power_supply_battery_ocv_table *cap_table; struct power_supply_resistance_temp_table *resist_table; }; @@ -900,7 +904,9 @@ static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data) */ cal_4200mv = (calib_data & 0x1ff) + 6963 - 4096 - 256; data->vol_1000mv_adc = DIV_ROUND_CLOSEST(cal_4200mv * 10, 42); - data->cur_1000ma_adc = data->vol_1000mv_adc * 4; + data->cur_1000ma_adc = + DIV_ROUND_CLOSEST(data->vol_1000mv_adc * 4 * data->calib_resist, + SC27XX_FGU_IDEAL_RESISTANCE); kfree(buf); return 0; @@ -1079,6 +1085,15 @@ static int sc27xx_fgu_probe(struct platform_device *pdev) return ret; } + ret = device_property_read_u32(&pdev->dev, + "sprd,calib-resistance-micro-ohms", + &data->calib_resist); + if (ret) { + dev_err(&pdev->dev, + "failed to get fgu calibration resistance\n"); + return ret; + } + data->channel = devm_iio_channel_get(dev, "bat-temp"); if (IS_ERR(data->channel)) { dev_err(dev, "failed to get IIO channel\n");