ftrace/x86: Have save_mcount_regs macro also save stack frames if needed

The save_mcount_regs macro saves and restores the required mcount regs that
need to be saved before calling C code. It is done for all the function hook
utilities (static tracing, dynamic tracing, regs, function graph).

When frame pointers are enabled, the ftrace trampolines need to set up
frames and pointers such that a back trace (dump stack) can continue passed
them. Currently, a separate macro is used (create_frame) to do this, but
it's only done for the ftrace_caller and ftrace_reg_caller functions. It
is not done for the static tracer or function graph tracing.

Instead of having a separate macro doing the recording of the frames,
have the save_mcount_regs perform this task. This also has all tracers
saving the frame pointers when needed.

Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanos

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This commit is contained in:
Steven Rostedt (Red Hat) 2014-11-24 18:08:48 -05:00 коммит произвёл Steven Rostedt
Родитель 85f6f0290c
Коммит 0687c36e45
1 изменённых файлов: 67 добавлений и 51 удалений

Просмотреть файл

@ -21,8 +21,22 @@
# define function_hook mcount
#endif
/* All cases save the original rbp (8 bytes) */
#ifdef CONFIG_FRAME_POINTER
# ifdef CC_USING_FENTRY
/* Save parent and function stack frames (rip and rbp) */
# define MCOUNT_FRAME_SIZE (8+16*2)
# else
/* Save just function stack frame (rip and rbp) */
# define MCOUNT_FRAME_SIZE (8+16)
# endif
#else
/* No need to save a stack frame */
# define MCOUNT_FRAME_SIZE 8
#endif /* CONFIG_FRAME_POINTER */
/* Size of stack used to save mcount regs in save_mcount_regs */
#define MCOUNT_REG_SIZE (SS+8)
#define MCOUNT_REG_SIZE (SS+8 + MCOUNT_FRAME_SIZE)
/*
* gcc -pg option adds a call to 'mcount' in most functions.
@ -42,10 +56,37 @@
/* @added: the amount of stack added before calling this */
.macro save_mcount_regs added=0
/*
* We add enough stack to save all regs.
*/
subq $MCOUNT_REG_SIZE, %rsp
/* Always save the original rbp */
pushq %rbp
#ifdef CONFIG_FRAME_POINTER
/*
* Stack traces will stop at the ftrace trampoline if the frame pointer
* is not set up properly. If fentry is used, we need to save a frame
* pointer for the parent as well as the function traced, because the
* fentry is called before the stack frame is set up, where as mcount
* is called afterward.
*/
#ifdef CC_USING_FENTRY
/* Save the parent pointer (skip orig rbp and our return address) */
pushq \added+8*2(%rsp)
pushq %rbp
movq %rsp, %rbp
/* Save the return address (now skip orig rbp, rbp and parent) */
pushq \added+8*3(%rsp)
#else
/* Can't assume that rip is before this (unless added was zero) */
pushq \added+8(%rsp)
#endif
pushq %rbp
movq %rsp, %rbp
#endif /* CONFIG_FRAME_POINTER */
/*
* We add enough stack to save all regs.
*/
subq $(MCOUNT_REG_SIZE - MCOUNT_FRAME_SIZE), %rsp
movq %rax, RAX(%rsp)
movq %rcx, RCX(%rsp)
movq %rdx, RDX(%rsp)
@ -53,6 +94,13 @@
movq %rdi, RDI(%rsp)
movq %r8, R8(%rsp)
movq %r9, R9(%rsp)
/*
* Save the original RBP. Even though the mcount ABI does not
* require this, it helps out callers.
*/
movq MCOUNT_REG_SIZE-8(%rsp), %rdx
movq %rdx, RBP(%rsp)
/* Move RIP to its proper location */
movq MCOUNT_REG_SIZE+\added(%rsp), %rdi
movq %rdi, RIP(%rsp)
@ -66,7 +114,12 @@
movq RDX(%rsp), %rdx
movq RCX(%rsp), %rcx
movq RAX(%rsp), %rax
/* ftrace_regs_caller can modify %rbp */
movq RBP(%rsp), %rbp
addq $MCOUNT_REG_SIZE, %rsp
.endm
/* skip is set if stack has been adjusted */
@ -84,7 +137,10 @@ GLOBAL(\trace_label)
#ifdef CC_USING_FENTRY
movq MCOUNT_REG_SIZE+8+\added(%rsp), %rsi
#else
movq 8+\added(%rbp), %rsi
/* Need to grab the original %rbp */
movq RBP(%rsp), %rsi
/* Now parent address is 8 above original %rbp */
movq 8(%rsi), %rsi
#endif
.endm
@ -94,51 +150,14 @@ ENTRY(function_hook)
retq
END(function_hook)
#ifdef CONFIG_FRAME_POINTER
/*
* Stack traces will stop at the ftrace trampoline if the frame pointer
* is not set up properly. If fentry is used, we need to save a frame
* pointer for the parent as well as the function traced, because the
* fentry is called before the stack frame is set up, where as mcount
* is called afterward.
*/
.macro create_frame parent rip
#ifdef CC_USING_FENTRY
pushq \parent
pushq %rbp
movq %rsp, %rbp
#endif
pushq \rip
pushq %rbp
movq %rsp, %rbp
.endm
.macro restore_frame
#ifdef CC_USING_FENTRY
addq $16, %rsp
#endif
popq %rbp
addq $8, %rsp
.endm
#else
.macro create_frame parent rip
.endm
.macro restore_frame
.endm
#endif /* CONFIG_FRAME_POINTER */
ENTRY(ftrace_caller)
ftrace_caller_setup ftrace_caller_op_ptr
/* regs go into 4th parameter (but make it NULL) */
movq $0, %rcx
create_frame %rsi, %rdi
GLOBAL(ftrace_call)
call ftrace_stub
restore_frame
restore_mcount_regs
/*
@ -172,7 +191,6 @@ ENTRY(ftrace_regs_caller)
movq %r12, R12(%rsp)
movq %r11, R11(%rsp)
movq %r10, R10(%rsp)
movq %rbp, RBP(%rsp)
movq %rbx, RBX(%rsp)
/* Copy saved flags */
movq MCOUNT_REG_SIZE(%rsp), %rcx
@ -189,13 +207,9 @@ ENTRY(ftrace_regs_caller)
/* regs go into 4th parameter */
leaq (%rsp), %rcx
create_frame %rsi, %rdi
GLOBAL(ftrace_regs_call)
call ftrace_stub
restore_frame
/* Copy flags back to SS, to restore them */
movq EFLAGS(%rsp), %rax
movq %rax, MCOUNT_REG_SIZE(%rsp)
@ -210,7 +224,6 @@ GLOBAL(ftrace_regs_call)
movq R13(%rsp), %r13
movq R12(%rsp), %r12
movq R10(%rsp), %r10
movq RBP(%rsp), %rbp
movq RBX(%rsp), %rbx
restore_mcount_regs
@ -269,8 +282,11 @@ ENTRY(ftrace_graph_caller)
leaq MCOUNT_REG_SIZE+8(%rsp), %rdi
movq $0, %rdx /* No framepointers needed */
#else
leaq 8(%rbp), %rdi
movq (%rbp), %rdx
/* Need to grab the original %rbp */
movq RBP(%rsp), %rdx
/* Now parent address is 8 above original %rbp */
leaq 8(%rdx), %rdi
movq (%rdx), %rdx
#endif
movq RIP(%rsp), %rsi
subq $MCOUNT_INSN_SIZE, %rsi