perf tools: Factor features display code

Currently the we display all detected features/libraries by following
rules:

 - if one of the features is missing
 - if it's build from clean tree

This patch changes changes this behavior in several ways.

- We no longer display all detected features, only detected libraries
  are displayed by default:

  $ make
    BUILD:   Doing 'make -j4' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]

  The assumption is, that above libraries are the most interesting part
of the detection, while we don't care much about detection of on-exit
support.

- If all above libraries are detected, the default is not shown on
  subsequent builds.

- If one of the above libraries is missing, the detection output is
  forced.

- The features status is stored in PERF-FEATURES file and the detection
  output is forced in case the there's difference between the file
  contents and currently detected features.

- If you want to see all detected features, you can use VF=1 make
  variable, that forces the detected features output.

  $ make VF=1
    BUILD:   Doing 'make -j4' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                      libaudit: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                      libslang: [ on  ]
  ...                     libunwind: [ on  ]
  ...                     backtrace: [ on  ]
  ...                fortify-source: [ on  ]
  ...                  gtk2-infobar: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...             libpython-version: [ on  ]
  ...                       on-exit: [ on  ]
  ...            stackprotector-all: [ on  ]
  ...                       timerfd: [ on  ]
  ...         libunwind-debug-frame: [ OFF ]
  ...                        bionic: [ OFF ]

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit is contained in:
Jiri Olsa 2014-02-19 16:52:54 +01:00 коммит произвёл Arnaldo Carvalho de Melo
Родитель da237ed07c
Коммит 0695e57b9a
2 изменённых файлов: 85 добавлений и 42 удалений

Просмотреть файл

@ -7,6 +7,8 @@ include config/utilities.mak
# Define V to have a more verbose compile.
#
# Define VF to have a more verbose feature check output.
#
# Define O to save output files in a separate directory.
#
# Define ARCH as name of target architecture if you want cross-builds.
@ -897,7 +899,7 @@ config-clean:
clean: $(LIBTRACEEVENT)-clean $(LIBAPIKFS)-clean config-clean
$(call QUIET_CLEAN, core-objs) $(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf.o $(LANG_BINDINGS) $(GTK_OBJS)
$(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf
$(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex*
$(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-FEATURES $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex*
$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean
$(python-clean)

Просмотреть файл

@ -149,6 +149,32 @@ CORE_FEATURE_TESTS = \
stackprotector-all \
timerfd
LIB_FEATURE_TESTS = \
dwarf \
glibc \
gtk2 \
libaudit \
libbfd \
libelf \
libnuma \
libperl \
libpython \
libslang \
libunwind
VF_FEATURE_TESTS = \
backtrace \
fortify-source \
gtk2-infobar \
libelf-getphdrnum \
libelf-mmap \
libpython-version \
on-exit \
stackprotector-all \
timerfd \
libunwind-debug-frame \
bionic
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all CORE_FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
# mentioned in this list we need to refactor this ;-).
@ -160,17 +186,6 @@ endef
$(foreach feat,$(CORE_FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
#
# So here we detect whether test-all was rebuilt, to be able
# to skip the print-out of the long features list if the file
# existed before and after it was built:
#
ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all.bin),)
test-all-failed := 1
else
test-all-failed := 0
endif
#
# Special fast-path for the 'all features are available' case:
#
@ -180,15 +195,6 @@ $(call feature_check,all,$(MSG))
# Just in case the build freshly failed, make sure we print the
# feature matrix:
#
ifeq ($(feature-all), 0)
test-all-failed := 1
endif
ifeq ($(test-all-failed),1)
$(info )
$(info Auto-detecting system features:)
endif
ifeq ($(feature-all), 1)
#
# test-all.c passed - just set all the core feature flags to 1:
@ -199,27 +205,6 @@ else
$(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
endif
#
# Print the result of the feature test:
#
feature_print = $(eval $(feature_print_code)) $(info $(MSG))
define feature_print_code
ifeq ($(feature-$(1)), 1)
MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
else
MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
endif
endef
#
# Only print out our features if we rebuilt the testcases or if a test failed:
#
ifeq ($(test-all-failed), 1)
$(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
$(info )
endif
ifeq ($(feature-stackprotector-all), 1)
CFLAGS += -fstack-protector-all
endif
@ -602,3 +587,59 @@ ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
endif
#
# Print the result of the feature test:
#
feature_print = $(eval $(feature_print_code)) $(info $(MSG))
define feature_print_code
ifeq ($(feature-$(1)), 1)
MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
else
MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
endif
endef
PERF_FEATURES := $(foreach feat,$(LIB_FEATURE_TESTS),feature-$(feat)($(feature-$(feat))))
PERF_FEATURES_FILE := $(shell touch $(OUTPUT)PERF-FEATURES; cat $(OUTPUT)PERF-FEATURES)
# The $(display_lib) controls the default detection message
# output. It's set if:
# - detected features differes from stored features from
# last build (in PERF-FEATURES file)
# - one of the $(LIB_FEATURE_TESTS) is not detected
# - VF is enabled
ifneq ("$(PERF_FEATURES)","$(PERF_FEATURES_FILE)")
$(shell echo "$(PERF_FEATURES)" > $(OUTPUT)PERF-FEATURES)
display_lib := 1
endif
feature_check = $(eval $(feature_check_code))
define feature_check_code
ifneq ($(feature-$(1)), 1)
display_lib := 1
endif
endef
$(foreach feat,$(LIB_FEATURE_TESTS),$(call feature_check,$(feat)))
ifeq ($(VF),1)
display_lib := 1
display_vf := 1
endif
ifeq ($(display_lib),1)
$(info )
$(info Auto-detecting system features:)
$(foreach feat,$(LIB_FEATURE_TESTS),$(call feature_print,$(feat),))
endif
ifeq ($(display_vf),1)
$(foreach feat,$(VF_FEATURE_TESTS),$(call feature_print,$(feat),))
endif
ifeq ($(display_lib),1)
$(info )
endif