[media] tc358743: set direction of reset gpio using devm_gpiod_get

Commit 2561482468 ("[media] tc358743: support probe from device tree")
failed to explicitly set the direction of the reset gpio. Use the
optional flag of devm_gpiod_get to make up leeway.

This is also necessary because the flag parameter will become mandatory
soon.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/i2c/tc358743.c

@@ -1681,7 +1681,6 @@ static const struct v4l2_ctrl_config tc358743_ctrl_audio_present = {
 #ifdef CONFIG_OF
 static void tc358743_gpio_reset(struct tc358743_state *state)
 {
-	gpiod_set_value(state->reset_gpio, 0);
 	usleep_range(5000, 10000);
 	gpiod_set_value(state->reset_gpio, 1);
 	usleep_range(1000, 2000);
@@ -1783,7 +1782,7 @@ static int tc358743_probe_of(struct tc358743_state *state)
 	state->pdata.ths_trailcnt = 0x2;
 	state->pdata.hstxvregcnt = 0;
 
-	state->reset_gpio = devm_gpiod_get(dev, "reset");
+	state->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(state->reset_gpio)) {
 		dev_err(dev, "failed to get reset gpio\n");
 		ret = PTR_ERR(state->reset_gpio);