Merge branch 'devel-stable' into devel

This commit is contained in:
Russell King 2009-12-05 10:35:33 +00:00
Родитель e28edb723e 677f4f64e4
Коммит 0719dc3413
337 изменённых файлов: 16473 добавлений и 3449 удалений

Просмотреть файл

@ -55,4 +55,4 @@ Maintainers
This board is maintained by Simtec Electronics.
(c) 2004 Ben Dooks, Simtec Electronics
Copyright 2004 Ben Dooks, Simtec Electronics

Просмотреть файл

@ -134,4 +134,4 @@ Authour
Ben Dooks, 03 October 2004
(c) 2004 Ben Dooks, Simtec Electronics
Copyright 2004 Ben Dooks, Simtec Electronics

Просмотреть файл

@ -299,4 +299,4 @@ Port Contributors
Document Author
---------------
Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
Ben Dooks, Copyright 2004-2006 Simtec Electronics

Просмотреть файл

@ -117,4 +117,4 @@ ATA
Document Author
---------------
Ben Dooks, (c) 2006 Simtec Electronics
Ben Dooks, Copyright 2006 Simtec Electronics

Просмотреть файл

@ -18,4 +18,4 @@ Camera Interface
Document Author
---------------
Ben Dooks, (c) 2006 Simtec Electronics
Ben Dooks, Copyright 2006 Simtec Electronics

Просмотреть файл

@ -133,5 +133,5 @@ Configuration
Document Author
---------------
Ben Dooks, (c) 2004 Simtec Electronics
Ben Dooks, Copyright 2004 Simtec Electronics

Просмотреть файл

@ -90,4 +90,4 @@ Platform Data
Document Author
---------------
Ben Dooks, (c) 2005 Simtec Electronics
Ben Dooks, Copyright 2005 Simtec Electronics

Просмотреть файл

@ -659,6 +659,9 @@ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
@ -729,6 +732,19 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp4xx/
ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/imote2.c
ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-pxa/stargate2.c
F: drivers/pcmcia/pxa2xx_stargate2.c
ARM/INTEL XSC3 (MANZANO) ARM CORE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>

Просмотреть файл

@ -433,6 +433,17 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
config ARCH_DOVE
bool "Marvell Dove"
select PCI
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
Support for the Marvell Dove SoC 88AP510
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select CPU_FEROCEON
@ -757,6 +768,9 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
@ -823,6 +837,8 @@ config ARCH_ACORN
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
config PLAT_ORION
bool

Просмотреть файл

@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91) := at91
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
@ -180,9 +181,9 @@ plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)

Просмотреть файл

@ -743,6 +743,12 @@ proc_types:
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
.word 0x560f5810 @ Marvell PJ4 ARMv6
.word 0xff0ffff0
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
W(b) __armv7_mmu_cache_on

Просмотреть файл

@ -1,15 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc8
# Thu Jun 4 09:53:21 2009
# Linux kernel version: 2.6.32-rc4
# Tue Oct 13 19:03:13 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
@ -46,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
@ -83,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@ -96,6 +94,10 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@ -103,13 +105,17 @@ CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
# CONFIG_SLOW_WORK is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@ -117,11 +123,11 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -142,19 +148,22 @@ CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -163,25 +172,27 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_BCMRING is not set
#
# Intel PXA2xx/PXA3xx Implementations
@ -191,16 +202,19 @@ CONFIG_ARCH_PXA=y
# Supported PXA3xx Processor Variants
#
CONFIG_CPU_PXA300=y
# CONFIG_CPU_PXA310 is not set
CONFIG_CPU_PXA310=y
# CONFIG_CPU_PXA320 is not set
# CONFIG_CPU_PXA930 is not set
# CONFIG_CPU_PXA935 is not set
# CONFIG_CPU_PXA950 is not set
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_MACH_INTELMOTE2 is not set
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_MACH_BALLOON3 is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_ARCH_VIPER is not set
@ -218,6 +232,7 @@ CONFIG_CPU_PXA300=y
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_CM_X300=y
# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_HIMALAYA is not set
# CONFIG_MACH_MIOA701 is not set
@ -225,8 +240,8 @@ CONFIG_MACH_CM_X300=y
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_MACH_CSB726 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_XCEP is not set
CONFIG_PXA3xx=y
# CONFIG_PXA_PWM is not set
CONFIG_PLAT_PXA=y
#
@ -236,7 +251,7 @@ CONFIG_CPU_32=y
CONFIG_CPU_XSC3=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@ -246,11 +261,12 @@ CONFIG_IO_36=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_XSC3L2=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_COMMON_CLKDEV=y
@ -272,11 +288,12 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
@ -292,17 +309,19 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@ -355,6 +374,7 @@ CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@ -396,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -410,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -433,22 +455,27 @@ CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
# CONFIG_MAC80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -461,6 +488,7 @@ CONFIG_LIB80211=m
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@ -472,9 +500,9 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
@ -521,6 +549,9 @@ CONFIG_MTD_CFI_I2=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@ -556,7 +587,15 @@ CONFIG_MTD_NAND_PXA3xx=y
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@ -570,6 +609,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -593,10 +633,6 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@ -621,7 +657,6 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -636,6 +671,7 @@ CONFIG_MII=y
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
@ -648,20 +684,20 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_HOSTAP is not set
#
@ -683,6 +719,7 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
@ -706,33 +743,51 @@ CONFIG_INPUT_EVDEV=y
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_PXA27x=m
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
CONFIG_KEYBOARD_PXA27x=m
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@ -760,6 +815,7 @@ CONFIG_DEVKMEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
@ -774,6 +830,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
@ -784,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
@ -807,19 +865,36 @@ CONFIG_I2C_PXA=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
# CONFIG_SPI_PXA2XX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
@ -839,11 +914,17 @@ CONFIG_GPIO_PCA953X=y
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@ -860,32 +941,33 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA903X=y
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@ -925,7 +1007,17 @@ CONFIG_FB_PXA=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_TDO24M=y
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_DA903X=m
#
# Display device support
@ -956,38 +1048,48 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_VMASTER=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_LIB=m
CONFIG_SND_PXA2XX_LIB_AC97=y
# CONFIG_SND_PXA2XX_AC97 is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_PXA2XX_SOC=m
CONFIG_SND_PXA2XX_SOC_AC97=m
CONFIG_SND_PXA2XX_SOC_EM_X270=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_WM9712=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
@ -1006,10 +1108,12 @@ CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
@ -1023,9 +1127,15 @@ CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@ -1054,6 +1164,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@ -1151,8 +1262,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@ -1162,8 +1274,10 @@ CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
@ -1179,6 +1293,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1210,10 +1325,19 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@ -1233,12 +1357,15 @@ CONFIG_RTC_DRV_V3020=y
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_PXA is not set
# CONFIG_RTC_DRV_SA1100 is not set
CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -1256,10 +1383,13 @@ CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -1319,6 +1449,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -1329,12 +1465,12 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@ -1378,7 +1514,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
@ -1428,6 +1564,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@ -1441,6 +1578,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@ -1460,32 +1598,20 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
@ -1509,7 +1635,6 @@ CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@ -1551,11 +1676,13 @@ CONFIG_CRYPTO_ECB=m
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
@ -1591,9 +1718,9 @@ CONFIG_CRYPTO_DES=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
@ -1608,7 +1735,7 @@ CONFIG_CRYPTO_DES=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@ -1616,6 +1743,8 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y

Разница между файлами не показана из-за своего большого размера Загрузить разницу

Разница между файлами не показана из-за своего большого размера Загрузить разницу

Просмотреть файл

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc4
# Tue Jul 28 14:11:34 2009
# Linux kernel version: 2.6.32-rc5
# Sun Nov 1 22:56:24 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@ -87,16 +87,14 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@ -139,6 +137,7 @@ CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX1 is not set
# CONFIG_ARCH_MX2 is not set
# CONFIG_ARCH_MX25 is not set
CONFIG_ARCH_MX3=y
# CONFIG_ARCH_MXC91231 is not set
CONFIG_ARCH_MX31=y
CONFIG_ARCH_MX35=y
@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_ARCH_HAS_RNGA=y
@ -218,7 +223,7 @@ CONFIG_CPU_V6=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@ -236,6 +241,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
@ -257,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@ -277,6 +285,7 @@ CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
@ -326,6 +335,7 @@ CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@ -367,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -407,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@ -416,9 +428,9 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@ -587,14 +599,12 @@ CONFIG_DNET=y
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@ -608,6 +618,7 @@ CONFIG_FEC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
@ -630,7 +641,14 @@ CONFIG_DEVKMEM=y
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
@ -649,6 +667,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@ -681,15 +700,17 @@ CONFIG_I2C_IMX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@ -712,6 +733,10 @@ CONFIG_GPIOLIB=y
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
CONFIG_W1=y
#
@ -734,7 +759,6 @@ CONFIG_W1_SLAVE_THERM=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@ -759,12 +783,24 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_CONFIG_MODE_0=y
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
#
@ -874,10 +910,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_MXC=y
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
@ -896,16 +934,11 @@ CONFIG_DMA_ENGINE=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -921,6 +954,7 @@ CONFIG_REGULATOR_WM8350=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
@ -995,7 +1029,6 @@ CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1033,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@ -1062,7 +1096,6 @@ CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@ -1104,11 +1137,13 @@ CONFIG_CRYPTO_CBC=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set

Просмотреть файл

@ -0,0 +1,11 @@
/*
* arch/arm/include/asm/hardware/cache-tauros2.h
*
* Copyright (C) 2008 Marvell Semiconductor
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
extern void __init tauros2_init(void);

Просмотреть файл

@ -234,7 +234,13 @@ extern int iop3xx_get_init_atu(void);
void iop3xx_map_io(void);
void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
unsigned long iop_gettimeoffset(void);
static inline u32 read_tmr0(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
return val;
}
static inline void write_tmr0(u32 val)
{
@ -253,6 +259,11 @@ static inline u32 read_tcr0(void)
return val;
}
static inline void write_tcr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
}
static inline u32 read_tcr1(void)
{
u32 val;
@ -260,6 +271,11 @@ static inline u32 read_tcr1(void)
return val;
}
static inline void write_tcr1(u32 val)
{
asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
}
static inline void write_trr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));

Просмотреть файл

@ -32,7 +32,7 @@
* numbers for r1.
*
*/
.section ".text.head", "ax"
__HEAD
ENTRY(stext)
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled

Просмотреть файл

@ -74,7 +74,7 @@
* crap here - that's what the boot loader (or in extreme, well justified
* circumstances, zImage) is for.
*/
.section ".text.head", "ax"
__HEAD
ENTRY(stext)
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled

Просмотреть файл

@ -24,13 +24,11 @@ SECTIONS
#else
. = PAGE_OFFSET + TEXT_OFFSET;
#endif
.text.head : {
_stext = .;
_sinittext = .;
*(.text.head)
}
.init : { /* Init code and data */
_stext = .;
_sinittext = .;
HEAD_TEXT
INIT_TEXT
_einittext = .;
__proc_info_begin = .;
@ -42,43 +40,31 @@ SECTIONS
__tagtable_begin = .;
*(.taglist.init)
__tagtable_end = .;
. = ALIGN(16);
__setup_start = .;
*(.init.setup)
__setup_end = .;
INIT_SETUP(16)
__early_begin = .;
*(.early_param.init)
__early_end = .;
__initcall_start = .;
INITCALLS
__initcall_end = .;
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
__security_initcall_start = .;
*(.security_initcall.init)
__security_initcall_end = .;
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(32);
__initramfs_start = .;
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
#endif
. = ALIGN(PAGE_SIZE);
__per_cpu_load = .;
__per_cpu_start = .;
*(.data.percpu.page_aligned)
*(.data.percpu)
*(.data.percpu.shared_aligned)
__per_cpu_end = .;
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
INIT_RAM_FS
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
}
PERCPU(PAGE_SIZE)
#ifndef CONFIG_XIP_KERNEL
. = ALIGN(PAGE_SIZE);
__init_end = .;
#endif
/DISCARD/ : { /* Exit code and data */
EXIT_TEXT
EXIT_DATA
@ -157,7 +143,7 @@ SECTIONS
* first, the init task union, aligned
* to an 8192 byte boundary.
*/
*(.data.init_task)
INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_XIP_KERNEL
. = ALIGN(PAGE_SIZE);
@ -167,17 +153,8 @@ SECTIONS
__init_end = .;
#endif
. = ALIGN(PAGE_SIZE);
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(PAGE_SIZE);
__nosave_end = .;
/*
* then the cacheline aligned data
*/
. = ALIGN(32);
*(.data.cacheline_aligned)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(32)
/*
* The exception fixup table (might need resorting at runtime)
@ -256,20 +233,10 @@ SECTIONS
}
#endif
.bss : {
__bss_start = .; /* BSS */
*(.bss)
*(COMMON)
__bss_stop = .;
_end = .;
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
BSS_SECTION(0, 0, 0)
_end = .;
STABS_DEBUG
.comment 0 : { *(.comment) }
}

Просмотреть файл

@ -1,5 +1,20 @@
if ARCH_AT91
config HAVE_AT91_DATAFLASH_CARD
bool
config HAVE_NAND_ATMEL_BUSWIDTH_16
bool
config HAVE_AT91_USART3
bool
config HAVE_AT91_USART4
bool
config HAVE_AT91_USART5
bool
menu "Atmel AT91 System-on-Chip"
choice
@ -10,54 +25,69 @@ config ARCH_AT91RM9200
select CPU_ARM920T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
config ARCH_AT91X40
bool "AT91x40"
@ -76,89 +106,79 @@ comment "AT91RM9200 Board Type"
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
depends on ARCH_AT91RM9200
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
depends on ARCH_AT91RM9200
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.htm>
config MACH_ATEB9200
bool "Embest ATEB9200"
depends on ARCH_AT91RM9200
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
depends on ARCH_AT91RM9200
help
Select this if you are using KwikByte's KB920x board.
<http://kwikbyte.com/KB9202_description_new.htm>
config MACH_PICOTUX2XX
bool "picotux 200"
depends on ARCH_AT91RM9200
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
depends on ARCH_AT91RM9200
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
depends on ARCH_AT91RM9200
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
depends on ARCH_AT91RM9200
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
depends on ARCH_AT91RM9200
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
@ -178,7 +198,6 @@ comment "AT91SAM9260 Variants"
config ARCH_AT91SAM9260_SAM9XE
bool "AT91SAM9XE"
depends on ARCH_AT91SAM9260
help
Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
They are basically AT91SAM9260s with various sizes of embedded Flash.
@ -187,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
depends on ARCH_AT91SAM9260
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
depends on ARCH_AT91SAM9260
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
depends on ARCH_AT91SAM9260
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
depends on ARCH_AT91SAM9260
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
@ -217,21 +235,18 @@ config MACH_AFEB9260
config MACH_USB_A9260
bool "CALAO USB-A9260"
depends on ARCH_AT91SAM9260
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
depends on ARCH_AT91SAM9260
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
depends on ARCH_AT91SAM9260
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
@ -246,7 +261,8 @@ comment "AT91SAM9261 Board Type"
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
depends on ARCH_AT91SAM9261
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@ -261,7 +277,8 @@ comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
depends on ARCH_AT91SAM9G10
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@ -276,21 +293,21 @@ comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
depends on ARCH_AT91SAM9263
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_USB_A9263
bool "CALAO USB-A9263"
depends on ARCH_AT91SAM9263
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
config MACH_NEOCORE926
bool "Adeneo NEOCORE926"
depends on ARCH_AT91SAM9263
select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using the Adeneo Neocore 926 board.
@ -304,7 +321,6 @@ comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
depends on ARCH_AT91SAM9RL
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
@ -318,14 +334,15 @@ comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
depends on ARCH_AT91SAM9G20
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
depends on ARCH_AT91SAM9G20
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@ -333,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
@ -348,7 +364,7 @@ comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9G45EKES
bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
depends on ARCH_AT91SAM9G45
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
"ES" at the end of the name means that this board is an
@ -364,7 +380,8 @@ comment "AT91CAP9 Board Type"
config MACH_AT91CAP9ADK
bool "Atmel AT91CAP9A-DK Evaluation Kit"
depends on ARCH_AT91CAP9
select HAVE_AT91_DATAFLASH_CARD
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@ -393,13 +410,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
depends on HAVE_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
depends on HAVE_NAND_ATMEL_BUSWIDTH_16
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@ -461,15 +478,15 @@ config AT91_EARLY_USART2
config AT91_EARLY_USART3
bool "USART3"
depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
depends on HAVE_AT91_USART3
config AT91_EARLY_USART4
bool "USART4"
depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
depends on HAVE_AT91_USART4
config AT91_EARLY_USART5
bool "USART5"
depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
depends on HAVE_AT91_USART5
endchoice

Просмотреть файл

@ -0,0 +1,14 @@
if ARCH_DOVE
menu "Marvell Dove Implementations"
config MACH_DOVE_DB
bool "Marvell DB-MV88AP510 Development Board"
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
endmenu
endif

Просмотреть файл

@ -0,0 +1,3 @@
obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o

Просмотреть файл

@ -0,0 +1,3 @@
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000

Просмотреть файл

@ -0,0 +1,149 @@
/*
* arch/arm/mach-dove/addr-map.c
*
* Address map functions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0x0
#define TARGET_BOOTROM 0x1
#define TARGET_CESA 0x3
#define TARGET_PCIE0 0x4
#define TARGET_PCIE1 0x8
#define TARGET_SCRATCHPAD 0xd
#define ATTR_CESA 0x01
#define ATTR_BOOTROM 0xfd
#define ATTR_DEV_SPI0_ROM 0xfe
#define ATTR_DEV_SPI1_ROM 0xfb
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SCRATCHPAD 0x0
/*
* CPU Address Decode Windows registers
*/
#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
struct mbus_dram_target_info dove_mbus_dram_info;
static inline void __iomem *ddr_map_sc(int i)
{
return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
}
static int cpu_win_can_remap(int win)
{
if (win < 4)
return 1;
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, WIN_BASE(win));
writel(ctrl, WIN_CTRL(win));
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, WIN_REMAP_LO(win));
writel(0, WIN_REMAP_HI(win));
}
}
void __init dove_setup_cpu_mbus(void)
{
int i;
int cs;
/*
* First, disable and clear windows.
*/
for (i = 0; i < 8; i++) {
writel(0, WIN_BASE(i));
writel(0, WIN_CTRL(i));
if (cpu_win_can_remap(i)) {
writel(0, WIN_REMAP_LO(i));
writel(0, WIN_REMAP_HI(i));
}
}
/*
* Setup windows for PCIe IO+MEM space.
*/
setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
TARGET_PCIE0, ATTR_PCIE_MEM, -1);
setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
TARGET_PCIE1, ATTR_PCIE_MEM, -1);
/*
* Setup window for CESA engine.
*/
setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
TARGET_CESA, ATTR_CESA, -1);
/*
* Setup the Window to the BootROM for Standby and Sleep Resume
*/
setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
TARGET_BOOTROM, ATTR_BOOTROM, -1);
/*
* Setup the Window to the PMU Scratch Pad space
*/
setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
/*
* Setup MBUS dram target info.
*/
dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
for (i = 0, cs = 0; i < 2; i++) {
u32 map = readl(ddr_map_sc(i));
/*
* Chip select enabled?
*/
if (map & 1) {
struct mbus_dram_window *w;
w = &dove_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0; /* CS address decoding done inside */
/* the DDR controller, no need to */
/* provide attributes */
w->base = map & 0xff800000;
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
}
}
dove_mbus_dram_info.num_cs = cs;
}

781
arch/arm/mach-dove/common.c Normal file
Просмотреть файл

@ -0,0 +1,781 @@
/*
* arch/arm/mach-dove/common.c
*
* Core functions for Marvell Dove 88AP510 System On Chip
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/serial_8250.h>
#include <linux/clk.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/spi/orion_spi.h>
#include <linux/gpio.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/mach/pci.h>
#include <mach/dove.h>
#include <mach/bridge-regs.h>
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/mv_xor.h>
#include <plat/ehci-orion.h>
#include <plat/time.h>
#include "common.h"
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc dove_io_desc[] __initdata = {
{
.virtual = DOVE_SB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
.length = DOVE_SB_REGS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_NB_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
.length = DOVE_NB_REGS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_PCIE0_IO_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
.length = DOVE_PCIE0_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = DOVE_PCIE1_IO_VIRT_BASE,
.pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
.length = DOVE_PCIE1_IO_SIZE,
.type = MT_DEVICE,
},
};
void __init dove_map_io(void)
{
iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
}
/*****************************************************************************
* EHCI
****************************************************************************/
static struct orion_ehci_data dove_ehci_data = {
.dram = &dove_mbus_dram_info,
.phy_version = EHCI_PHY_NA,
};
static u64 ehci_dmamask = DMA_BIT_MASK(32);
/*****************************************************************************
* EHCI0
****************************************************************************/
static struct resource dove_ehci0_resources[] = {
{
.start = DOVE_USB0_PHYS_BASE,
.end = DOVE_USB0_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_USB0,
.end = IRQ_DOVE_USB0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ehci0 = {
.name = "orion-ehci",
.id = 0,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dove_ehci_data,
},
.resource = dove_ehci0_resources,
.num_resources = ARRAY_SIZE(dove_ehci0_resources),
};
void __init dove_ehci0_init(void)
{
platform_device_register(&dove_ehci0);
}
/*****************************************************************************
* EHCI1
****************************************************************************/
static struct resource dove_ehci1_resources[] = {
{
.start = DOVE_USB1_PHYS_BASE,
.end = DOVE_USB1_PHYS_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_USB1,
.end = IRQ_DOVE_USB1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ehci1 = {
.name = "orion-ehci",
.id = 1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &dove_ehci_data,
},
.resource = dove_ehci1_resources,
.num_resources = ARRAY_SIZE(dove_ehci1_resources),
};
void __init dove_ehci1_init(void)
{
platform_device_register(&dove_ehci1);
}
/*****************************************************************************
* GE00
****************************************************************************/
struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
.t_clk = 0,
.dram = &dove_mbus_dram_info,
};
static struct resource dove_ge00_shared_resources[] = {
{
.name = "ge00 base",
.start = DOVE_GE00_PHYS_BASE + 0x2000,
.end = DOVE_GE00_PHYS_BASE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_ge00_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &dove_ge00_shared_data,
},
.num_resources = 1,
.resource = dove_ge00_shared_resources,
};
static struct resource dove_ge00_resources[] = {
{
.name = "ge00 irq",
.start = IRQ_DOVE_GE00_SUM,
.end = IRQ_DOVE_GE00_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_ge00 = {
.name = MV643XX_ETH_NAME,
.id = 0,
.num_resources = 1,
.resource = dove_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &dove_ge00_shared;
dove_ge00.dev.platform_data = eth_data;
platform_device_register(&dove_ge00_shared);
platform_device_register(&dove_ge00);
}
/*****************************************************************************
* SoC RTC
****************************************************************************/
static struct resource dove_rtc_resource[] = {
{
.start = DOVE_RTC_PHYS_BASE,
.end = DOVE_RTC_PHYS_BASE + 32 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_RTC,
.flags = IORESOURCE_IRQ,
}
};
void __init dove_rtc_init(void)
{
platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
}
/*****************************************************************************
* SATA
****************************************************************************/
static struct resource dove_sata_resources[] = {
{
.name = "sata base",
.start = DOVE_SATA_PHYS_BASE,
.end = DOVE_SATA_PHYS_BASE + 0x5000 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "sata irq",
.start = IRQ_DOVE_SATA,
.end = IRQ_DOVE_SATA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_sata = {
.name = "sata_mv",
.id = 0,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(dove_sata_resources),
.resource = dove_sata_resources,
};
void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
{
sata_data->dram = &dove_mbus_dram_info;
dove_sata.dev.platform_data = sata_data;
platform_device_register(&dove_sata);
}
/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port dove_uart0_data[] = {
{
.mapbase = DOVE_UART0_PHYS_BASE,
.membase = (char *)DOVE_UART0_VIRT_BASE,
.irq = IRQ_DOVE_UART_0,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart0_resources[] = {
{
.start = DOVE_UART0_PHYS_BASE,
.end = DOVE_UART0_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_0,
.end = IRQ_DOVE_UART_0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart0 = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = dove_uart0_data,
},
.resource = dove_uart0_resources,
.num_resources = ARRAY_SIZE(dove_uart0_resources),
};
void __init dove_uart0_init(void)
{
platform_device_register(&dove_uart0);
}
/*****************************************************************************
* UART1
****************************************************************************/
static struct plat_serial8250_port dove_uart1_data[] = {
{
.mapbase = DOVE_UART1_PHYS_BASE,
.membase = (char *)DOVE_UART1_VIRT_BASE,
.irq = IRQ_DOVE_UART_1,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart1_resources[] = {
{
.start = DOVE_UART1_PHYS_BASE,
.end = DOVE_UART1_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_1,
.end = IRQ_DOVE_UART_1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart1 = {
.name = "serial8250",
.id = 1,
.dev = {
.platform_data = dove_uart1_data,
},
.resource = dove_uart1_resources,
.num_resources = ARRAY_SIZE(dove_uart1_resources),
};
void __init dove_uart1_init(void)
{
platform_device_register(&dove_uart1);
}
/*****************************************************************************
* UART2
****************************************************************************/
static struct plat_serial8250_port dove_uart2_data[] = {
{
.mapbase = DOVE_UART2_PHYS_BASE,
.membase = (char *)DOVE_UART2_VIRT_BASE,
.irq = IRQ_DOVE_UART_2,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart2_resources[] = {
{
.start = DOVE_UART2_PHYS_BASE,
.end = DOVE_UART2_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_2,
.end = IRQ_DOVE_UART_2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart2 = {
.name = "serial8250",
.id = 2,
.dev = {
.platform_data = dove_uart2_data,
},
.resource = dove_uart2_resources,
.num_resources = ARRAY_SIZE(dove_uart2_resources),
};
void __init dove_uart2_init(void)
{
platform_device_register(&dove_uart2);
}
/*****************************************************************************
* UART3
****************************************************************************/
static struct plat_serial8250_port dove_uart3_data[] = {
{
.mapbase = DOVE_UART3_PHYS_BASE,
.membase = (char *)DOVE_UART3_VIRT_BASE,
.irq = IRQ_DOVE_UART_3,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource dove_uart3_resources[] = {
{
.start = DOVE_UART3_PHYS_BASE,
.end = DOVE_UART3_PHYS_BASE + SZ_256 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_UART_3,
.end = IRQ_DOVE_UART_3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_uart3 = {
.name = "serial8250",
.id = 3,
.dev = {
.platform_data = dove_uart3_data,
},
.resource = dove_uart3_resources,
.num_resources = ARRAY_SIZE(dove_uart3_resources),
};
void __init dove_uart3_init(void)
{
platform_device_register(&dove_uart3);
}
/*****************************************************************************
* SPI0
****************************************************************************/
static struct orion_spi_info dove_spi0_data = {
.tclk = 0,
};
static struct resource dove_spi0_resources[] = {
{
.start = DOVE_SPI0_PHYS_BASE,
.end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_SPI0,
.end = IRQ_DOVE_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_spi0 = {
.name = "orion_spi",
.id = 0,
.resource = dove_spi0_resources,
.dev = {
.platform_data = &dove_spi0_data,
},
.num_resources = ARRAY_SIZE(dove_spi0_resources),
};
void __init dove_spi0_init(void)
{
platform_device_register(&dove_spi0);
}
/*****************************************************************************
* SPI1
****************************************************************************/
static struct orion_spi_info dove_spi1_data = {
.tclk = 0,
};
static struct resource dove_spi1_resources[] = {
{
.start = DOVE_SPI1_PHYS_BASE,
.end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_DOVE_SPI1,
.end = IRQ_DOVE_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_spi1 = {
.name = "orion_spi",
.id = 1,
.resource = dove_spi1_resources,
.dev = {
.platform_data = &dove_spi1_data,
},
.num_resources = ARRAY_SIZE(dove_spi1_resources),
};
void __init dove_spi1_init(void)
{
platform_device_register(&dove_spi1);
}
/*****************************************************************************
* I2C
****************************************************************************/
static struct mv64xxx_i2c_pdata dove_i2c_data = {
.freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */
.freq_n = 3,
.timeout = 1000, /* Default timeout of 1 second */
};
static struct resource dove_i2c_resources[] = {
{
.name = "i2c base",
.start = DOVE_I2C_PHYS_BASE,
.end = DOVE_I2C_PHYS_BASE + 0x20 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c irq",
.start = IRQ_DOVE_I2C,
.end = IRQ_DOVE_I2C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dove_i2c = {
.name = MV64XXX_I2C_CTLR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(dove_i2c_resources),
.resource = dove_i2c_resources,
.dev = {
.platform_data = &dove_i2c_data,
},
};
void __init dove_i2c_init(void)
{
platform_device_register(&dove_i2c);
}
/*****************************************************************************
* Time handling
****************************************************************************/
static int get_tclk(void)
{
/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
return 166666667;
}
static void dove_timer_init(void)
{
orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
}
struct sys_timer dove_timer = {
.init = dove_timer_init,
};
/*****************************************************************************
* XOR
****************************************************************************/
static struct mv_xor_platform_shared_data dove_xor_shared_data = {
.dram = &dove_mbus_dram_info,
};
/*****************************************************************************
* XOR 0
****************************************************************************/
static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
static struct resource dove_xor0_shared_resources[] = {
{
.name = "xor 0 low",
.start = DOVE_XOR0_PHYS_BASE,
.end = DOVE_XOR0_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 0 high",
.start = DOVE_XOR0_HIGH_PHYS_BASE,
.end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_xor0_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &dove_xor_shared_data,
},
.num_resources = ARRAY_SIZE(dove_xor0_shared_resources),
.resource = dove_xor0_shared_resources,
};
static struct resource dove_xor00_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_00,
.end = IRQ_DOVE_XOR_00,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor00_data = {
.shared = &dove_xor0_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor00_channel = {
.name = MV_XOR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(dove_xor00_resources),
.resource = dove_xor00_resources,
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor00_data,
},
};
static struct resource dove_xor01_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_01,
.end = IRQ_DOVE_XOR_01,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor01_data = {
.shared = &dove_xor0_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor01_channel = {
.name = MV_XOR_NAME,
.id = 1,
.num_resources = ARRAY_SIZE(dove_xor01_resources),
.resource = dove_xor01_resources,
.dev = {
.dma_mask = &dove_xor0_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor01_data,
},
};
void __init dove_xor0_init(void)
{
platform_device_register(&dove_xor0_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
platform_device_register(&dove_xor00_channel);
dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
platform_device_register(&dove_xor01_channel);
}
/*****************************************************************************
* XOR 1
****************************************************************************/
static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
static struct resource dove_xor1_shared_resources[] = {
{
.name = "xor 0 low",
.start = DOVE_XOR1_PHYS_BASE,
.end = DOVE_XOR1_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 0 high",
.start = DOVE_XOR1_HIGH_PHYS_BASE,
.end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dove_xor1_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &dove_xor_shared_data,
},
.num_resources = ARRAY_SIZE(dove_xor1_shared_resources),
.resource = dove_xor1_shared_resources,
};
static struct resource dove_xor10_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_10,
.end = IRQ_DOVE_XOR_10,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor10_data = {
.shared = &dove_xor1_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor10_channel = {
.name = MV_XOR_NAME,
.id = 2,
.num_resources = ARRAY_SIZE(dove_xor10_resources),
.resource = dove_xor10_resources,
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor10_data,
},
};
static struct resource dove_xor11_resources[] = {
[0] = {
.start = IRQ_DOVE_XOR_11,
.end = IRQ_DOVE_XOR_11,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data dove_xor11_data = {
.shared = &dove_xor1_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device dove_xor11_channel = {
.name = MV_XOR_NAME,
.id = 3,
.num_resources = ARRAY_SIZE(dove_xor11_resources),
.resource = dove_xor11_resources,
.dev = {
.dma_mask = &dove_xor1_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = (void *)&dove_xor11_data,
},
};
void __init dove_xor1_init(void)
{
platform_device_register(&dove_xor1_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
platform_device_register(&dove_xor10_channel);
dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
platform_device_register(&dove_xor11_channel);
}
void __init dove_init(void)
{
int tclk;
tclk = get_tclk();
printk(KERN_INFO "Dove 88AP510 SoC, ");
printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
#ifdef CONFIG_CACHE_TAUROS2
tauros2_init();
#endif
dove_setup_cpu_mbus();
dove_ge00_shared_data.t_clk = tclk;
dove_uart0_data[0].uartclk = tclk;
dove_uart1_data[0].uartclk = tclk;
dove_uart2_data[0].uartclk = tclk;
dove_uart3_data[0].uartclk = tclk;
dove_spi0_data.tclk = tclk;
dove_spi1_data.tclk = tclk;
/* internal devices that every board has */
dove_rtc_init();
dove_xor0_init();
dove_xor1_init();
}

Просмотреть файл

@ -0,0 +1,40 @@
/*
* arch/arm/mach-dove/common.h
*
* Core functions for Marvell Dove 88AP510 System On Chip
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ARCH_DOVE_COMMON_H
#define __ARCH_DOVE_COMMON_H
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
extern struct sys_timer dove_timer;
extern struct mbus_dram_target_info dove_mbus_dram_info;
/*
* Basic Dove init functions used early by machine-setup.
*/
void dove_map_io(void);
void dove_init(void);
void dove_init_irq(void);
void dove_setup_cpu_mbus(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void dove_sata_init(struct mv_sata_platform_data *sata_data);
void dove_pcie_init(int init_port0, int init_port1);
void dove_ehci0_init(void);
void dove_ehci1_init(void);
void dove_uart0_init(void);
void dove_uart1_init(void);
void dove_uart2_init(void);
void dove_uart3_init(void);
void dove_spi0_init(void);
void dove_spi1_init(void);
void dove_i2c_init(void);
#endif

Просмотреть файл

@ -0,0 +1,102 @@
/*
* arch/arm/mach-dove/dove-db-setup.c
*
* Marvell DB-MV88AP510-BP Development Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/i2c.h>
#include <linux/pci.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/spi/flash.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/dove.h>
#include "common.h"
static struct mv643xx_eth_platform_data dove_db_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
};
static struct mv_sata_platform_data dove_db_sata_data = {
.n_ports = 1,
};
/*****************************************************************************
* SPI Devices:
* SPI0: 4M Flash ST-M25P32-VMF6P
****************************************************************************/
static const struct flash_platform_data dove_db_spi_flash_data = {
.type = "m25p64",
};
static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
{
.modalias = "m25p80",
.platform_data = &dove_db_spi_flash_data,
.irq = -1,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
},
};
/*****************************************************************************
* PCI
****************************************************************************/
static int __init dove_db_pci_init(void)
{
if (machine_is_dove_db())
dove_pcie_init(1, 1);
return 0;
}
subsys_initcall(dove_db_pci_init);
/*****************************************************************************
* Board Init
****************************************************************************/
static void __init dove_db_init(void)
{
/*
* Basic Dove setup. Needs to be called early.
*/
dove_init();
dove_ge00_init(&dove_db_ge00_data);
dove_ehci0_init();
dove_ehci1_init();
dove_sata_init(&dove_db_sata_data);
dove_spi0_init();
dove_spi1_init();
dove_uart0_init();
dove_uart1_init();
dove_i2c_init();
spi_register_board_info(dove_db_spi_flash_info,
ARRAY_SIZE(dove_db_spi_flash_info));
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
.phys_io = DOVE_SB_REGS_PHYS_BASE,
.io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_irq = dove_init_irq,
.timer = &dove_timer,
MACHINE_END

Просмотреть файл

@ -0,0 +1,58 @@
/*
* arch/arm/mach-dove/include/mach/bridge-regs.h
*
* Mbus-L to Mbus Bridge Registers
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/dove.h>
#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_CTRL_PCIE0_LINK 0x00000001
#define CPU_RESET 0x00000002
#define CPU_CTRL_PCIE1_LINK 0x00000008
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define FIQ_MASK_LOW_OFF 0x0008
#define ENDPOINT_MASK_LOW_OFF 0x000c
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define FIQ_MASK_HIGH_OFF 0x0018
#define ENDPOINT_MASK_HIGH_OFF 0x001c
#define PCIE_INTERRUPT_MASK_OFF 0x0020
#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#endif

Просмотреть файл

@ -0,0 +1,20 @@
/*
* arch/arm/mach-dove/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>

Просмотреть файл

@ -0,0 +1,180 @@
/*
* arch/arm/mach-dove/include/mach/dove.h
*
* Generic definitions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_DOVE_H
#define __ASM_ARCH_DOVE_H
#include <mach/vmalloc.h>
/*
* Marvell Dove address maps.
*
* phys virt size
* c8000000 fdb00000 1M Cryptographic SRAM
* e0000000 @runtime 128M PCIe-0 Memory space
* e8000000 @runtime 128M PCIe-1 Memory space
* f1000000 fde00000 8M on-chip south-bridge registers
* f1800000 fe600000 8M on-chip north-bridge registers
* f2000000 fee00000 1M PCIe-0 I/O space
* f2100000 fef00000 1M PCIe-1 I/O space
*/
#define DOVE_CESA_PHYS_BASE 0xc8000000
#define DOVE_CESA_VIRT_BASE 0xfdb00000
#define DOVE_CESA_SIZE SZ_1M
#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
#define DOVE_PCIE0_MEM_SIZE SZ_128M
#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
#define DOVE_PCIE1_MEM_SIZE SZ_128M
#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
#define DOVE_BOOTROM_SIZE SZ_128M
#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
#define DOVE_SCRATCHPAD_SIZE SZ_1M
#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
#define DOVE_SB_REGS_SIZE SZ_8M
#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
#define DOVE_NB_REGS_SIZE SZ_8M
#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
#define DOVE_PCIE0_IO_SIZE SZ_1M
#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
#define DOVE_PCIE1_IO_SIZE SZ_1M
/*
* Dove Core Registers Map
*/
/* SPI, I2C, UART */
#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
/* North-South Bridge */
#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
/* Cryptographic Engine */
#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
/* PCIe 0 */
#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
/* USB */
#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
/* XOR 0 Engine */
#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
/* XOR 1 Engine */
#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
/* Gigabit Ethernet */
#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
/* PCIe 1 */
#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
/* CAFE */
#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
/* SATA */
#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
/* I2S/SPDIF */
#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
/* NAND Flash Controller */
#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
/* MPP, GPIO, Reset Sampling */
#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
#define DOVE_NAND_GPIO_EN (1 << 0)
#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
/* Power Management */
#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
/* Real Time Clock */
#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
/* AC97 */
#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
/* Peripheral DMA */
#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
#define DOVE_SSP_ON_AU1 (1 << 0)
#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
/* Memory Controller */
#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
/* LCD Controller */
#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
/* Graphic Engine */
#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
/* Video Engine */
#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
#endif

Просмотреть файл

@ -0,0 +1,39 @@
/*
* arch/arm/mach-dove/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Marvell Dove platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #63
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm

Просмотреть файл

@ -0,0 +1,49 @@
/*
* arch/arm/mach-dove/include/mach/gpio.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#include <asm/errno.h>
#include <mach/irqs.h>
#include <plat/gpio.h>
#include <asm-generic/gpio.h> /* cansleep wrappers */
#define GPIO_MAX 64
#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
static inline int gpio_to_irq(int pin)
{
if (pin < NR_GPIO_IRQS)
return pin + IRQ_DOVE_GPIO_START;
return -EINVAL;
}
static inline int irq_to_gpio(int irq)
{
if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
return irq - IRQ_DOVE_GPIO_START;
return -EINVAL;
}
#endif

Просмотреть файл

@ -0,0 +1,26 @@
/*
* arch/arm/mach-dove/include/mach/hardware.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include "dove.h"
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x01000000
#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
/* Macros below are required for compatibility with PXA AC'97 driver. */
#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
DOVE_SB_REGS_VIRT_BASE)))
#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
DOVE_SB_REGS_PHYS_BASE)
#endif

Просмотреть файл

@ -0,0 +1,20 @@
/*
* arch/arm/mach-dove/include/mach/io.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#include "dove.h"
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
DOVE_PCIE0_IO_VIRT_BASE))
#define __mem_pci(a) (a)
#endif

Просмотреть файл

@ -0,0 +1,101 @@
/*
* arch/arm/mach-dove/include/mach/irqs.h
*
* IRQ definitions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
/*
* Dove Low Interrupt Controller
*/
#define IRQ_DOVE_BRIDGE 0
#define IRQ_DOVE_H2C 1
#define IRQ_DOVE_C2H 2
#define IRQ_DOVE_NAND 3
#define IRQ_DOVE_PDMA 4
#define IRQ_DOVE_SPI1 5
#define IRQ_DOVE_SPI0 6
#define IRQ_DOVE_UART_0 7
#define IRQ_DOVE_UART_1 8
#define IRQ_DOVE_UART_2 9
#define IRQ_DOVE_UART_3 10
#define IRQ_DOVE_I2C 11
#define IRQ_DOVE_GPIO_0_7 12
#define IRQ_DOVE_GPIO_8_15 13
#define IRQ_DOVE_GPIO_16_23 14
#define IRQ_DOVE_PCIE0_ERR 15
#define IRQ_DOVE_PCIE0 16
#define IRQ_DOVE_PCIE1_ERR 17
#define IRQ_DOVE_PCIE1 18
#define IRQ_DOVE_I2S0 19
#define IRQ_DOVE_I2S0_ERR 20
#define IRQ_DOVE_I2S1 21
#define IRQ_DOVE_I2S1_ERR 22
#define IRQ_DOVE_USB_ERR 23
#define IRQ_DOVE_USB0 24
#define IRQ_DOVE_USB1 25
#define IRQ_DOVE_GE00_RX 26
#define IRQ_DOVE_GE00_TX 27
#define IRQ_DOVE_GE00_MISC 28
#define IRQ_DOVE_GE00_SUM 29
#define IRQ_DOVE_GE00_ERR 30
#define IRQ_DOVE_CRYPTO 31
/*
* Dove High Interrupt Controller
*/
#define IRQ_DOVE_AC97 32
#define IRQ_DOVE_PMU 33
#define IRQ_DOVE_CAM 34
#define IRQ_DOVE_SDIO0 35
#define IRQ_DOVE_SDIO1 36
#define IRQ_DOVE_SDIO0_WAKEUP 37
#define IRQ_DOVE_SDIO1_WAKEUP 38
#define IRQ_DOVE_XOR_00 39
#define IRQ_DOVE_XOR_01 40
#define IRQ_DOVE_XOR0_ERR 41
#define IRQ_DOVE_XOR_10 42
#define IRQ_DOVE_XOR_11 43
#define IRQ_DOVE_XOR1_ERR 44
#define IRQ_DOVE_LCD_DCON 45
#define IRQ_DOVE_LCD1 46
#define IRQ_DOVE_LCD0 47
#define IRQ_DOVE_GPU 48
#define IRQ_DOVE_PERFORM_MNTR 49
#define IRQ_DOVE_VPRO_DMA1 51
#define IRQ_DOVE_SSP_TIMER 54
#define IRQ_DOVE_SSP 55
#define IRQ_DOVE_MC_L2_ERR 56
#define IRQ_DOVE_CRYPTO_ERR 59
#define IRQ_DOVE_GPIO_24_31 60
#define IRQ_DOVE_HIGH_GPIO 61
#define IRQ_DOVE_SATA 62
/*
* DOVE General Purpose Pins
*/
#define IRQ_DOVE_GPIO_START 64
#define NR_GPIO_IRQS 64
/*
* PMU interrupts
*/
#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
#define NR_PMU_IRQS 7
#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
/* Required for compatability with PXA AC97 driver. */
#define IRQ_AC97 IRQ_DOVE_AC97
/* Required for compatability with PXA DMA driver. */
#define IRQ_DMA IRQ_DOVE_PDMA
/* Required for compatability with PXA NAND driver */
#define IRQ_NAND IRQ_DOVE_NAND
#endif

Просмотреть файл

@ -0,0 +1,10 @@
/*
* arch/arm/mach-dove/include/mach/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#endif

Просмотреть файл

@ -0,0 +1,54 @@
/*
* arch/arm/mach-dove/include/mach/pm.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_PM_H
#define __ASM_ARCH_PM_H
#include <asm/errno.h>
#include <mach/irqs.h>
#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
#define CLOCK_GATING_USB0_MASK (1 << 0)
#define CLOCK_GATING_USB1_MASK (1 << 1)
#define CLOCK_GATING_GBE_MASK (1 << 2)
#define CLOCK_GATING_SATA_MASK (1 << 3)
#define CLOCK_GATING_PCIE0_MASK (1 << 4)
#define CLOCK_GATING_PCIE1_MASK (1 << 5)
#define CLOCK_GATING_SDIO0_MASK (1 << 8)
#define CLOCK_GATING_SDIO1_MASK (1 << 9)
#define CLOCK_GATING_NAND_MASK (1 << 10)
#define CLOCK_GATING_CAMERA_MASK (1 << 11)
#define CLOCK_GATING_I2S0_MASK (1 << 12)
#define CLOCK_GATING_I2S1_MASK (1 << 13)
#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
#define CLOCK_GATING_AC97_MASK (1 << 21)
#define CLOCK_GATING_PDMA_MASK (1 << 22)
#define CLOCK_GATING_XOR0_MASK (1 << 23)
#define CLOCK_GATING_XOR1_MASK (1 << 24)
#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
static inline int pmu_to_irq(int pin)
{
if (pin < NR_PMU_IRQS)
return pin + IRQ_DOVE_PMU_START;
return -EINVAL;
}
static inline int irq_to_pmu(int irq)
{
if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
return irq - IRQ_DOVE_PMU_START;
return -EINVAL;
}
#endif

Просмотреть файл

@ -0,0 +1,36 @@
/*
* arch/arm/mach-dove/include/mach/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
/*
* Enable soft reset to assert RSTOUTn.
*/
writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
/*
* Assert soft reset.
*/
writel(SOFT_RESET, SYSTEM_SOFT_RESET);
while (1)
;
}
#endif

Просмотреть файл

@ -0,0 +1,9 @@
/*
* arch/arm/mach-dove/include/mach/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)

Просмотреть файл

@ -0,0 +1,37 @@
/*
* arch/arm/mach-dove/include/mach/uncompress.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/dove.h>
#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
#define LSR_THRE 0x20
static void putc(const char c)
{
int i;
for (i = 0; i < 0x1000; i++) {
/* Transmit fifo not full? */
if (*UART_LSR & LSR_THRE)
break;
}
*UART_THR = c;
}
static void flush(void)
{
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()

Просмотреть файл

@ -0,0 +1,5 @@
/*
* arch/arm/mach-dove/include/mach/vmalloc.h
*/
#define VMALLOC_END 0xfd800000

133
arch/arm/mach-dove/irq.c Normal file
Просмотреть файл

@ -0,0 +1,133 @@
/*
* arch/arm/mach-dove/irq.c
*
* Dove IRQ handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <plat/irq.h>
#include <asm/mach/irq.h>
#include <mach/pm.h>
#include <mach/bridge-regs.h>
#include "common.h"
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
{
int irqoff;
BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
3 + irq - IRQ_DOVE_GPIO_24_31;
orion_gpio_irq_handler(irqoff << 3);
if (irq == IRQ_DOVE_HIGH_GPIO) {
orion_gpio_irq_handler(40);
orion_gpio_irq_handler(48);
orion_gpio_irq_handler(56);
}
}
static void pmu_irq_mask(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u &= ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_unmask(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = readl(PMU_INTERRUPT_MASK);
u |= 1 << (pin & 31);
writel(u, PMU_INTERRUPT_MASK);
}
static void pmu_irq_ack(unsigned int irq)
{
int pin = irq_to_pmu(irq);
u32 u;
u = ~(1 << (pin & 31));
writel(u, PMU_INTERRUPT_CAUSE);
}
static struct irq_chip pmu_irq_chip = {
.name = "pmu_irq",
.mask = pmu_irq_mask,
.unmask = pmu_irq_unmask,
.ack = pmu_irq_ack,
};
static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
cause &= readl(PMU_INTERRUPT_MASK);
if (cause == 0) {
do_bad_IRQ(irq, desc);
return;
}
for (irq = 0; irq < NR_PMU_IRQS; irq++) {
if (!(cause & (1 << irq)))
continue;
irq = pmu_to_irq(irq);
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
}
void __init dove_init_irq(void)
{
int i;
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
/*
* Mask and clear GPIO IRQ interrupts.
*/
writel(0, GPIO_LEVEL_MASK(0));
writel(0, GPIO_EDGE_MASK(0));
writel(0, GPIO_EDGE_CAUSE(0));
/*
* Mask and clear PMU interrupts
*/
writel(0, PMU_INTERRUPT_MASK);
writel(0, PMU_INTERRUPT_CAUSE);
for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
set_irq_chip(i, &orion_gpio_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
set_irq_chip(i, &pmu_irq_chip);
set_irq_handler(i, handle_level_irq);
irq_desc[i].status |= IRQ_LEVEL;
set_irq_flags(i, IRQF_VALID);
}
set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
}

238
arch/arm/mach-dove/pcie.c Normal file
Просмотреть файл

@ -0,0 +1,238 @@
/*
* arch/arm/mach-dove/pcie.c
*
* PCIe functions for Marvell Dove 88AP510 SoC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <asm/delay.h>
#include <plat/pcie.h>
#include <mach/irqs.h>
#include <mach/bridge-regs.h>
#include "common.h"
struct pcie_port {
u8 index;
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
char io_space_name[16];
char mem_space_name[16];
struct resource res[2];
};
static struct pcie_port pcie_port[2];
static int num_pcie_ports;
static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct pcie_port *pp;
if (nr >= num_pcie_ports)
return 0;
pp = &pcie_port[nr];
pp->root_bus_nr = sys->busnr;
/*
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &dove_mbus_dram_info);
/*
* IORESOURCE_IO
*/
snprintf(pp->io_space_name, sizeof(pp->io_space_name),
"PCIe %d I/O", pp->index);
pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
pp->res[0].name = pp->io_space_name;
if (pp->index == 0) {
pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
} else {
pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
}
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d MEM", pp->index);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
pp->res[1].name = pp->mem_space_name;
if (pp->index == 0) {
pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
} else {
pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
}
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
return 1;
}
static struct pcie_port *bus_to_port(int bus)
{
int i;
for (i = num_pcie_ports - 1; i >= 0; i--) {
int rbus = pcie_port[i].root_bus_nr;
if (rbus != -1 && rbus <= bus)
break;
}
return i >= 0 ? pcie_port + i : NULL;
}
static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
{
/*
* Don't go out when trying to access nonexisting devices
* on the local bus.
*/
if (bus == pp->root_bus_nr && dev > 1)
return 0;
return 1;
}
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static struct pci_ops pcie_ops = {
.read = pcie_rd_conf,
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.
*/
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
static struct pci_bus __init *
dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr < num_pcie_ports) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
} else {
bus = NULL;
BUG();
}
return bus;
}
static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus->number);
return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
}
static struct hw_pci dove_pci __initdata = {
.nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = dove_pcie_setup,
.scan = dove_pcie_scan_bus,
.map_irq = dove_pcie_map_irq,
};
static void __init add_pcie_port(int index, unsigned long base)
{
printk(KERN_INFO "Dove PCIe port %d: ", index);
if (orion_pcie_link_up((void __iomem *)base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk(KERN_INFO "link up\n");
pp->index = index;
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
memset(pp->res, 0, sizeof(pp->res));
} else {
printk(KERN_INFO "link down, ignoring\n");
}
}
void __init dove_pcie_init(int init_port0, int init_port1)
{
if (init_port0)
add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
if (init_port1)
add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
pci_common_init(&dove_pci);
}

Просмотреть файл

@ -20,7 +20,6 @@
#define IOP13XX_CORE_FREQ_1200 (5 << 16)
void iop_init_time(unsigned long tickrate);
unsigned long iop_gettimeoffset(void);
static inline unsigned long iop13xx_core_freq(void)
{
@ -66,6 +65,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
return 2;
}
static inline u32 read_tmr0(void)
{
u32 val;
asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
return val;
}
static inline void write_tmr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@ -83,6 +89,11 @@ static inline u32 read_tcr0(void)
return val;
}
static inline void write_tcr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
}
static inline u32 read_tcr1(void)
{
u32 val;
@ -90,6 +101,11 @@ static inline u32 read_tcr1(void)
return val;
}
static inline void write_tcr1(u32 val)
{
asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
}
static inline void write_trr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));

Просмотреть файл

@ -87,7 +87,6 @@ static void __init iq81340mc_timer_init(void)
static struct sys_timer iq81340mc_timer = {
.init = iq81340mc_timer_init,
.offset = iop_gettimeoffset,
};
MACHINE_START(IQ81340MC, "Intel IQ81340MC")

Просмотреть файл

@ -89,7 +89,6 @@ static void __init iq81340sc_timer_init(void)
static struct sys_timer iq81340sc_timer = {
.init = iq81340sc_timer_init,
.offset = iop_gettimeoffset,
};
MACHINE_START(IQ81340SC, "Intel IQ81340SC")

Просмотреть файл

@ -42,7 +42,6 @@ static void __init em7210_timer_init(void)
static struct sys_timer em7210_timer = {
.init = em7210_timer_init,
.offset = iop_gettimeoffset,
};
/*

Просмотреть файл

@ -47,7 +47,6 @@ static void __init glantank_timer_init(void)
static struct sys_timer glantank_timer = {
.init = glantank_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -78,7 +78,6 @@ static void __init iq31244_timer_init(void)
static struct sys_timer iq31244_timer = {
.init = iq31244_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -46,7 +46,6 @@ static void __init iq80321_timer_init(void)
static struct sys_timer iq80321_timer = {
.init = iq80321_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -53,7 +53,6 @@ static void __init n2100_timer_init(void)
static struct sys_timer n2100_timer = {
.init = n2100_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -48,7 +48,6 @@ static void __init iq80331_timer_init(void)
static struct sys_timer iq80331_timer = {
.init = iq80331_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -48,7 +48,6 @@ static void __init iq80332_timer_init(void)
static struct sys_timer iq80332_timer = {
.init = iq80332_timer_init,
.offset = iop_gettimeoffset,
};

Просмотреть файл

@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
Marvell SheevaPlug Reference Board.
config MACH_TS219
bool "QNAP TS-119 and TS-219 Turbo NAS"
bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
QNAP TS-119 and TS-219 Turbo NAS devices.
QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
devices.
config MACH_TS41X
bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
devices.
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"

Просмотреть файл

@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o

Просмотреть файл

@ -1,6 +1,6 @@
/*
*
* QNAP TS-119/TS-219 Turbo NAS Board Setup
* QNAP TS-11x/TS-21x Turbo NAS Board Setup
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
@ -14,87 +14,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/timex.h>
#include <linux/serial_reg.h>
#include <linux/pci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
/****************************************************************************
* 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
* partitions on the device because we want to keep compatability with
* the QNAP firmware.
* Layout as used by QNAP:
* 0x00000000-0x00080000 : "U-Boot"
* 0x00200000-0x00400000 : "Kernel"
* 0x00400000-0x00d00000 : "RootFS"
* 0x00d00000-0x01000000 : "RootFS2"
* 0x00080000-0x000c0000 : "U-Boot Config"
* 0x000c0000-0x00200000 : "NAS Config"
*
* We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
* used by the QNAP TS-109/TS-209.
*
***************************************************************************/
static struct mtd_partition qnap_ts219_partitions[] = {
{
.name = "U-Boot",
.size = 0x00080000,
.offset = 0,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "Kernel",
.size = 0x00200000,
.offset = 0x00200000,
}, {
.name = "RootFS1",
.size = 0x00900000,
.offset = 0x00400000,
}, {
.name = "RootFS2",
.size = 0x00300000,
.offset = 0x00d00000,
}, {
.name = "U-Boot Config",
.size = 0x00040000,
.offset = 0x00080000,
}, {
.name = "NAS Config",
.size = 0x00140000,
.offset = 0x000c0000,
},
};
static const struct flash_platform_data qnap_ts219_flash = {
.type = "m25p128",
.name = "spi_flash",
.parts = qnap_ts219_partitions,
.nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
};
static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &qnap_ts219_flash,
.irq = -1,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
},
};
#include "tsx1x-common.h"
static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
0
};
/*****************************************************************************
* QNAP TS-x19 specific power off method via UART1-attached PIC
****************************************************************************/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
void qnap_ts219_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack UART1 and reset into sane state (19200,8n1) */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
}
static void __init qnap_ts219_init(void)
{
/*
@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
kirkwood_uart0_init();
kirkwood_uart1_init(); /* A PIC controller is connected here. */
spi_register_board_info(qnap_ts219_spi_slave_info,
ARRAY_SIZE(qnap_ts219_spi_slave_info));
kirkwood_spi_init();
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
kirkwood_ehci_init();
platform_device_register(&qnap_ts219_button_device);
pm_power_off = qnap_ts219_power_off;
pm_power_off = qnap_tsx1x_power_off;
}

Просмотреть файл

@ -0,0 +1,154 @@
/*
*
* QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
#include "tsx1x-common.h"
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
};
static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv_sata_platform_data qnap_ts41x_sata_data = {
.n_ports = 2,
};
static struct gpio_keys_button qnap_ts41x_buttons[] = {
{
.code = KEY_COPY,
.gpio = 43,
.desc = "USB Copy",
.active_low = 1,
},
{
.code = KEY_RESTART,
.gpio = 37,
.desc = "Reset",
.active_low = 1,
},
};
static struct gpio_keys_platform_data qnap_ts41x_button_data = {
.buttons = qnap_ts41x_buttons,
.nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
};
static struct platform_device qnap_ts41x_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &qnap_ts41x_button_data,
}
};
static unsigned int qnap_ts41x_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP6_SYSRST_OUTn,
MPP7_PEX_RST_OUTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP13_UART1_TXD, /* PIC controller */
MPP14_UART1_RXD, /* PIC controller */
MPP15_SATA0_ACTn,
MPP16_SATA1_ACTn,
MPP20_GE1_0,
MPP21_GE1_1,
MPP22_GE1_2,
MPP23_GE1_3,
MPP24_GE1_4,
MPP25_GE1_5,
MPP26_GE1_6,
MPP27_GE1_7,
MPP30_GE1_10,
MPP31_GE1_11,
MPP32_GE1_12,
MPP33_GE1_13,
MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
MPP37_GPIO, /* Reset button */
MPP43_GPIO, /* USB Copy button */
MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
MPP45_GPIO, /* JP1: 0: console, 1: LCD */
MPP46_GPIO, /* External SATA HDD1 error indicator */
MPP47_GPIO, /* External SATA HDD2 error indicator */
MPP48_GPIO, /* External SATA HDD3 error indicator */
MPP49_GPIO, /* External SATA HDD4 error indicator */
0
};
static void __init qnap_ts41x_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(qnap_ts41x_mpp_config);
kirkwood_uart0_init();
kirkwood_uart1_init(); /* A PIC controller is connected here. */
qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
kirkwood_ge00_init(&qnap_ts41x_ge00_data);
kirkwood_ge01_init(&qnap_ts41x_ge01_data);
kirkwood_sata_init(&qnap_ts41x_sata_data);
kirkwood_ehci_init();
platform_device_register(&qnap_ts41x_button_device);
pm_power_off = qnap_tsx1x_power_off;
}
static int __init ts41x_pci_init(void)
{
if (machine_is_ts41x())
kirkwood_pcie_init();
return 0;
}
subsys_initcall(ts41x_pci_init);
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &kirkwood_timer,
MACHINE_END

Просмотреть файл

@ -0,0 +1,113 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/serial_reg.h>
#include <mach/kirkwood.h>
#include "common.h"
/*
* QNAP TS-x1x Boards flash
*/
/****************************************************************************
* 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
* partitions on the device because we want to keep compatability with
* the QNAP firmware.
* Layout as used by QNAP:
* 0x00000000-0x00080000 : "U-Boot"
* 0x00200000-0x00400000 : "Kernel"
* 0x00400000-0x00d00000 : "RootFS"
* 0x00d00000-0x01000000 : "RootFS2"
* 0x00080000-0x000c0000 : "U-Boot Config"
* 0x000c0000-0x00200000 : "NAS Config"
*
* We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
* used by the QNAP TS-109/TS-209.
*
***************************************************************************/
struct mtd_partition qnap_tsx1x_partitions[] = {
{
.name = "U-Boot",
.size = 0x00080000,
.offset = 0,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "Kernel",
.size = 0x00200000,
.offset = 0x00200000,
}, {
.name = "RootFS1",
.size = 0x00900000,
.offset = 0x00400000,
}, {
.name = "RootFS2",
.size = 0x00300000,
.offset = 0x00d00000,
}, {
.name = "U-Boot Config",
.size = 0x00040000,
.offset = 0x00080000,
}, {
.name = "NAS Config",
.size = 0x00140000,
.offset = 0x000c0000,
},
};
const struct flash_platform_data qnap_tsx1x_flash = {
.type = "m25p128",
.name = "spi_flash",
.parts = qnap_tsx1x_partitions,
.nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
};
struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &qnap_tsx1x_flash,
.irq = -1,
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
},
};
void qnap_tsx1x_register_flash(void)
{
spi_register_board_info(qnap_tsx1x_spi_slave_info,
ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
kirkwood_spi_init();
}
/*****************************************************************************
* QNAP TS-x1x specific power off method via UART1-attached PIC
****************************************************************************/
#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
void qnap_tsx1x_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
pr_info("%s: triggering power-off...\n", __func__);
/* hijack UART1 and reset into sane state (19200,8n1) */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x03, UART1_REG(LCR));
writel(0x00, UART1_REG(IER));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
}

Просмотреть файл

@ -0,0 +1,7 @@
#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
extern void qnap_tsx1x_register_flash(void);
extern void qnap_tsx1x_power_off(void);
#endif

Просмотреть файл

@ -13,6 +13,9 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -85,12 +88,48 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static struct mtd_partition aspenite_nand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = SZ_1M,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "reserved",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "reserved",
.offset = MTDPART_OFS_APPEND,
.size = SZ_8M,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = (SZ_2M + SZ_1M),
.mask_flags = 0,
}, {
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = SZ_48M,
.mask_flags = 0,
}
};
static struct pxa3xx_nand_platform_data aspenite_nand_info = {
.enable_arbiter = 1,
.parts = aspenite_nand_partitions,
.nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
};
static void __init common_init(void)
{
mfp_config(ARRAY_AND_SIZE(common_pin_config));
/* on-chip devices */
pxa168_add_uart(1);
pxa168_add_nand(&aspenite_nand_info);
/* off-chip devices */
platform_device_register(&smc91x_device);

Просмотреть файл

@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = {
.disable = apbc_clk_disable,
};
static void apmu_clk_enable(struct clk *clk)
{
__raw_writel(clk->enable_val, clk->clk_rst);
}
static void apmu_clk_disable(struct clk *clk)
{
__raw_writel(0, clk->clk_rst);
}
struct clkops apmu_clk_ops = {
.enable = apmu_clk_enable,
.disable = apmu_clk_disable,
};
static DEFINE_SPINLOCK(clocks_lock);
int clk_enable(struct clk *clk)

Просмотреть файл

@ -25,6 +25,7 @@ struct clk {
};
extern struct clkops apbc_clk_ops;
extern struct clkops apmu_clk_ops;
#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
struct clk clk_##_name = { \

Просмотреть файл

@ -31,7 +31,9 @@
#define IRQ_PXA168_DDR_INT 26
#define IRQ_PXA168_UART1 27
#define IRQ_PXA168_UART2 28
#define IRQ_PXA168_UART3 29
#define IRQ_PXA168_WDT 35
#define IRQ_PXA168_MAIN_PMU 36
#define IRQ_PXA168_FRQ_CHANGE 38
#define IRQ_PXA168_SDH1 39
#define IRQ_PXA168_SDH2 40
@ -46,7 +48,7 @@
#define IRQ_PXA168_USB2 51
#define IRQ_PXA168_AC97 57
#define IRQ_PXA168_TWSI1 58
#define IRQ_PXA168_PMU 60
#define IRQ_PXA168_AP_PMU 60
#define IRQ_PXA168_SM_INT 63
/*

Просмотреть файл

@ -4,6 +4,7 @@
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1;
extern struct pxa_device_desc pxa168_device_pwm2;
extern struct pxa_device_desc pxa168_device_pwm3;
extern struct pxa_device_desc pxa168_device_pwm4;
extern struct pxa_device_desc pxa168_device_nand;
static inline int pxa168_add_uart(int id)
{
@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id)
return pxa_register_device(d, NULL, 0);
}
static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
{
return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
}
#endif /* __ASM_MACH_PXA168_H */

Просмотреть файл

@ -4,6 +4,7 @@
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
#include <plat/pxa3xx_nand.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1;
extern struct pxa_device_desc pxa910_device_pwm2;
extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
static inline int pxa910_add_uart(int id)
{
@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id)
return pxa_register_device(d, NULL, 0);
}
static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
{
return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
}
#endif /* __ASM_MACH_PXA910_H */

Просмотреть файл

@ -19,6 +19,7 @@
#include <mach/addr-map.h>
#include <mach/cputype.h>
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/dma.h>
@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};
static int __init pxa168_init(void)
@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

Просмотреть файл

@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
static APMU_CLK(nand, NAND, 0x01db, 208000000);
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};
static int __init pxa910_init(void)
@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

Просмотреть файл

@ -11,9 +11,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
@ -26,6 +30,86 @@ static unsigned long ttc_dkb_pin_config[] __initdata = {
/* UART2 */
GPIO47_UART2_RXD,
GPIO48_UART2_TXD,
/* DFI */
DF_IO0_ND_IO0,
DF_IO1_ND_IO1,
DF_IO2_ND_IO2,
DF_IO3_ND_IO3,
DF_IO4_ND_IO4,
DF_IO5_ND_IO5,
DF_IO6_ND_IO6,
DF_IO7_ND_IO7,
DF_IO8_ND_IO8,
DF_IO9_ND_IO9,
DF_IO10_ND_IO10,
DF_IO11_ND_IO11,
DF_IO12_ND_IO12,
DF_IO13_ND_IO13,
DF_IO14_ND_IO14,
DF_IO15_ND_IO15,
DF_nCS0_SM_nCS2_nCS0,
DF_ALE_SM_WEn_ND_ALE,
DF_CLE_SM_OEn_ND_CLE,
DF_WEn_DF_WEn,
DF_REn_DF_REn,
DF_RDY0_DF_RDY0,
};
static struct mtd_partition ttc_dkb_onenand_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = SZ_1M,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "reserved",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "reserved",
.offset = MTDPART_OFS_APPEND,
.size = SZ_8M,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = (SZ_2M + SZ_1M),
.mask_flags = 0,
}, {
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = SZ_48M,
.mask_flags = 0,
}
};
static struct onenand_platform_data ttc_dkb_onenand_info = {
.parts = ttc_dkb_onenand_partitions,
.nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
};
static struct resource ttc_dkb_resource_onenand[] = {
[0] = {
.start = SMC_CS0_PHYS_BASE,
.end = SMC_CS0_PHYS_BASE + SZ_1M,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ttc_dkb_device_onenand = {
.name = "onenand-flash",
.id = -1,
.resource = ttc_dkb_resource_onenand,
.num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
.dev = {
.platform_data = &ttc_dkb_onenand_info,
},
};
static struct platform_device *ttc_dkb_devices[] = {
&ttc_dkb_device_onenand,
};
static void __init ttc_dkb_init(void)
@ -34,6 +118,9 @@ static void __init ttc_dkb_init(void)
/* on-chip devices */
pxa910_add_uart(1);
/* off-chip devices */
platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
}
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")

Просмотреть файл

@ -6,11 +6,13 @@ choice
config MACH_MX21
bool "i.MX21 support"
select ARCH_MXC_AUDMUX_V1
help
This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
select ARCH_MXC_AUDMUX_V1
help
This enables support for Freescale's MX2 based i.MX27 processor.
@ -102,4 +104,11 @@ config MACH_PCA100
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
config MACH_MXT_TD60
bool "Maxtrack i-MXT TD60"
depends on MACH_MX27
help
Include support for i-MXT (aka td60) platform. This
includes specific configurations for the module and its peripherals.
endif

Просмотреть файл

@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o

Просмотреть файл

@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_enable(&per_clk[0]);
clk_enable(&gpio_clk);
#ifdef CONFIG_DEBUG_LL_CONSOLE
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart_clk[0]);
#endif

Просмотреть файл

@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk)
@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_enable(&emi_clk);
clk_enable(&iim_clk);
#ifdef CONFIG_DEBUG_LL_CONSOLE
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart1_clk);
#endif

Просмотреть файл

@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = {
};
#endif
static struct resource imx_ssi_resources0[] = {
{
.start = SSI1_BASE_ADDR,
.end = SSI1_BASE_ADDR + 0x6F,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SSI1,
.end = MXC_INT_SSI1,
.flags = IORESOURCE_IRQ,
}, {
.name = "tx0",
.start = DMA_REQ_SSI1_TX0,
.end = DMA_REQ_SSI1_TX0,
.flags = IORESOURCE_DMA,
}, {
.name = "rx0",
.start = DMA_REQ_SSI1_RX0,
.end = DMA_REQ_SSI1_RX0,
.flags = IORESOURCE_DMA,
}, {
.name = "tx1",
.start = DMA_REQ_SSI1_TX1,
.end = DMA_REQ_SSI1_TX1,
.flags = IORESOURCE_DMA,
}, {
.name = "rx1",
.start = DMA_REQ_SSI1_RX1,
.end = DMA_REQ_SSI1_RX1,
.flags = IORESOURCE_DMA,
},
};
static struct resource imx_ssi_resources1[] = {
{
.start = SSI2_BASE_ADDR,
.end = SSI2_BASE_ADDR + 0x6F,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SSI2,
.end = MXC_INT_SSI2,
.flags = IORESOURCE_IRQ,
}, {
.name = "tx0",
.start = DMA_REQ_SSI2_TX0,
.end = DMA_REQ_SSI2_TX0,
.flags = IORESOURCE_DMA,
}, {
.name = "rx0",
.start = DMA_REQ_SSI2_RX0,
.end = DMA_REQ_SSI2_RX0,
.flags = IORESOURCE_DMA,
}, {
.name = "tx1",
.start = DMA_REQ_SSI2_TX1,
.end = DMA_REQ_SSI2_TX1,
.flags = IORESOURCE_DMA,
}, {
.name = "rx1",
.start = DMA_REQ_SSI2_RX1,
.end = DMA_REQ_SSI2_RX1,
.flags = IORESOURCE_DMA,
},
};
struct platform_device imx_ssi_device0 = {
.name = "imx-ssi",
.id = 0,
.num_resources = ARRAY_SIZE(imx_ssi_resources0),
.resource = imx_ssi_resources0,
};
struct platform_device imx_ssi_device1 = {
.name = "imx-ssi",
.id = 1,
.num_resources = ARRAY_SIZE(imx_ssi_resources1),
.resource = imx_ssi_resources1,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{

Просмотреть файл

@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;

Просмотреть файл

@ -0,0 +1,319 @@
/*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <linux/gpio.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
#include <linux/i2c/pca953x.h>
#include <mach/imxfb.h>
#include <mach/mmc.h>
#include "devices.h"
static unsigned int mxt_td60_pins[] __initdata = {
/* UART0 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
PE15_PF_UART1_RTS,
/* UART1 */
PE3_PF_UART2_CTS,
PE4_PF_UART2_RTS,
PE6_PF_UART2_TXD,
PE7_PF_UART2_RXD,
/* UART2 */
PE8_PF_UART3_TXD,
PE9_PF_UART3_RXD,
PE10_PF_UART3_CTS,
PE11_PF_UART3_RTS,
/* UART3 */
PB26_AF_UART4_RTS,
PB28_AF_UART4_TXD,
PB29_AF_UART4_CTS,
PB31_AF_UART4_RXD,
/* UART4 */
PB18_AF_UART5_TXD,
PB19_AF_UART5_RXD,
PB20_AF_UART5_CTS,
PB21_AF_UART5_RTS,
/* UART5 */
PB10_AF_UART6_TXD,
PB12_AF_UART6_CTS,
PB11_AF_UART6_RXD,
PB13_AF_UART6_RTS,
/* FEC */
PD0_AIN_FEC_TXD0,
PD1_AIN_FEC_TXD1,
PD2_AIN_FEC_TXD2,
PD3_AIN_FEC_TXD3,
PD4_AOUT_FEC_RX_ER,
PD5_AOUT_FEC_RXD1,
PD6_AOUT_FEC_RXD2,
PD7_AOUT_FEC_RXD3,
PD8_AF_FEC_MDIO,
PD9_AIN_FEC_MDC,
PD10_AOUT_FEC_CRS,
PD11_AOUT_FEC_TX_CLK,
PD12_AOUT_FEC_RXD0,
PD13_AOUT_FEC_RX_DV,
PD14_AOUT_FEC_RX_CLK,
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* I2C1 */
PD17_PF_I2C_DATA,
PD18_PF_I2C_CLK,
/* I2C2 */
PC5_PF_I2C2_SDA,
PC6_PF_I2C2_SCL,
/* FB */
PA5_PF_LSCLK,
PA6_PF_LD0,
PA7_PF_LD1,
PA8_PF_LD2,
PA9_PF_LD3,
PA10_PF_LD4,
PA11_PF_LD5,
PA12_PF_LD6,
PA13_PF_LD7,
PA14_PF_LD8,
PA15_PF_LD9,
PA16_PF_LD10,
PA17_PF_LD11,
PA18_PF_LD12,
PA19_PF_LD13,
PA20_PF_LD14,
PA21_PF_LD15,
PA22_PF_LD16,
PA23_PF_LD17,
PA25_PF_CLS,
PA27_PF_SPL_SPR,
PA28_PF_HSYNC,
PA29_PF_VSYNC,
PA30_PF_CONTRAST,
PA31_PF_OE_ACD,
/* OWIRE */
PE16_AF_OWIRE,
/* SDHC1*/
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
PF8_AF_ATA_IORDY,
/* SDHC2*/
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
};
static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
.width = 1,
.hw_ecc = 1,
};
static struct imxi2c_platform_data mxt_td60_i2c_data = {
.bitrate = 100000,
};
/* PCA9557 */
static int mxt_td60_pca9557_setup(struct i2c_client *client,
unsigned gpio_base, unsigned ngpio,
void *context)
{
static int mxt_td60_gpio_value[] = {
-1, -1, -1, -1, -1, -1, -1, 1
};
int n;
for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
if (mxt_td60_gpio_value[n] < 0)
gpio_direction_input(gpio_base + n);
else
gpio_direction_output(gpio_base + n,
mxt_td60_gpio_value[n]);
gpio_export(gpio_base + n, 0);
}
return 0;
}
static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
.gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
.invert = 0, /* Do not invert */
.setup = mxt_td60_pca9557_setup,
};
static struct i2c_board_info mxt_td60_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9557", 0x18),
.platform_data = &mxt_td60_pca9557_pdata,
},
};
static struct imxi2c_platform_data mxt_td60_i2c2_data = {
.bitrate = 100000,
};
static struct i2c_board_info mxt_td60_i2c2_devices[] = {
};
static struct imx_fb_videomode mxt_td60_modes[] = {
{
.mode = {
.name = "Chimei LW700AT9003",
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 30303,
.hsync_len = 64,
.left_margin = 0x67,
.right_margin = 0x68,
.vsync_len = 16,
.upper_margin = 0x0f,
.lower_margin = 0x0f,
},
.bpp = 16,
.pcr = 0xFA208B83,
},
};
static struct imx_fb_platform_data mxt_td60_fb_data = {
.mode = mxt_td60_modes,
.num_modes = ARRAY_SIZE(mxt_td60_modes),
/*
* - HSYNC active high
* - VSYNC active high
* - clk notenabled while idle
* - clock inverted
* - data not inverted
* - data enable low active
* - enable sharp mode
*/
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
"sdhc1-card-detect", data);
}
static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOF(8), data);
}
static struct imxmmc_platform_data sdhc1_pdata = {
.init = mxt_td60_sdhc1_init,
.exit = mxt_td60_sdhc1_exit,
};
static struct platform_device *platform_devices[] __initdata = {
&mxc_fec_device,
};
static struct imxuart_platform_data uart_pdata[] = {
{
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
}, {
.flags = IMXUART_HAVE_RTSCTS,
},
};
static void __init mxt_td60_board_init(void)
{
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
i2c_register_board_info(1, mxt_td60_i2c2_devices,
ARRAY_SIZE(mxt_td60_i2c2_devices));
mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init mxt_td60_timer_init(void)
{
mx27_clocks_init(26000000);
}
static struct sys_timer mxt_td60_timer = {
.init = mxt_td60_timer_init,
};
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mxt_td60_board_init,
.timer = &mxt_td60_timer,
MACHINE_END

Просмотреть файл

@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mxc_init_irq,
.init_irq = mx27_init_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
MACHINE_END

Просмотреть файл

@ -2,11 +2,13 @@ if ARCH_MX3
config ARCH_MX31
select ARCH_HAS_RNGA
select ARCH_MXC_AUDMUX_V2
bool
config ARCH_MX35
bool
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
comment "MX3 platforms:"
@ -61,6 +63,7 @@ config MACH_MX31_3DS
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
select MXC_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
@ -100,4 +103,12 @@ config MACH_MX35_3DS
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select ARCH_MX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
endif

Просмотреть файл

@ -4,12 +4,12 @@
# Object file lists.
obj-y := mm.o devices.o
obj-y := mm.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG) += qong.o
obj-$(CONFIG_MACH_PCM043) += pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o

Просмотреть файл

@ -33,6 +33,9 @@
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = {
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
};
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
static struct i2c_board_info armadillo5x0_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
};
/* GPIO BUTTONS */
static struct gpio_keys_button armadillo5x0_buttons[] = {
{
.code = KEY_ENTER, /*28*/
.gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
.active_low = 1,
.desc = "menu",
.wakeup = 1,
}, {
.code = KEY_BACK, /*158*/
.gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
.active_low = 1,
.desc = "back",
.wakeup = 1,
}
};
static struct gpio_keys_platform_data armadillo5x0_button_data = {
.buttons = armadillo5x0_buttons,
.nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
};
static struct platform_device armadillo5x0_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &armadillo5x0_button_data,
}
};
/*
@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
};
static struct smsc911x_platform_config smsc911x_info = {
.flags = SMSC911X_USE_32BIT,
.flags = SMSC911X_USE_16BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = {
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
&mxc_i2c_device1,
&armadillo5x0_button_device,
};
/*
@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void)
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */
if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
else
gpio_free(ARMADILLO5X0_RTC_GPIO);
}
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
}
static void __init armadillo5x0_timer_init(void)

Просмотреть файл

@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk)
DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL);
/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */
DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL);
@ -381,12 +381,43 @@ DEFINE_CLOCK(uart3_clk, 2, CCM_CGR2, 20, get_rate_uart, NULL);
DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL);
DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL);
DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL);
static int clk_dummy_enable(struct clk *clk)
{
return 0;
}
static void clk_dummy_disable(struct clk *clk)
{
}
static unsigned long get_rate_nfc(struct clk *clk)
{
unsigned long div1;
div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
return get_rate_ahb(NULL) / div1;
}
/* NAND Controller: It seems it can't be disabled */
static struct clk nfc_clk = {
.id = 0,
.enable_reg = 0,
.enable_shift = 0,
.get_rate = get_rate_nfc,
.set_rate = NULL, /* set_rate_nfc, */
.enable = clk_dummy_enable,
.disable = clk_dummy_disable
};
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@ -397,7 +428,6 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK(NULL, "can", can1_clk)
_REGISTER_CLOCK(NULL, "can", can2_clk)
_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@ -434,8 +464,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
_REGISTER_CLOCK(NULL, "spba", spba_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@ -443,12 +473,14 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
};
int __init mx35_clocks_init()
@ -456,7 +488,7 @@ int __init mx35_clocks_init()
int i;
unsigned int ll = 0;
#ifdef CONFIG_DEBUG_LL_CONSOLE
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
#endif

Просмотреть файл

@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK(NULL, "firi", firi_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref)
clk_enable(&serial_pll_clk);
mx31_read_cpu_rev();
if (mx31_revision() >= CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */

57
arch/arm/mach-mx3/cpu.c Normal file
Просмотреть файл

@ -0,0 +1,57 @@
/*
* MX3 CPU type detection
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/iim.h>
unsigned int mx31_cpu_rev;
EXPORT_SYMBOL(mx31_cpu_rev);
struct mx3_cpu_type {
u8 srev;
const char *name;
const char *v;
unsigned int rev;
};
static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 },
{ .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 },
{ .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 },
{ .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 },
{ .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 },
{ .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 },
{ .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 },
{ .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 },
{ .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 },
};
void __init mx31_read_cpu_rev(void)
{
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
printk(KERN_INFO
"CPU identified as %s, silicon rev %s\n",
mx31_cpu_type[i].name, mx31_cpu_type[i].v);
mx31_cpu_rev = mx31_cpu_type[i].rev;
return;
}
printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
}

Просмотреть файл

@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = {
};
#endif
static struct resource imx_ssi_resources0[] = {
{
.start = SSI1_BASE_ADDR,
.end = SSI1_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MX31_INT_SSI1,
.end = MX31_INT_SSI1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource imx_ssi_resources1[] = {
{
.start = SSI2_BASE_ADDR,
.end = SSI2_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM
}, {
.start = MX31_INT_SSI2,
.end = MX31_INT_SSI2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_ssi_device0 = {
.name = "imx-ssi",
.id = 0,
.num_resources = ARRAY_SIZE(imx_ssi_resources0),
.resource = imx_ssi_resources0,
};
struct platform_device imx_ssi_device1 = {
.name = "imx-ssi",
.id = 1,
.num_resources = ARRAY_SIZE(imx_ssi_resources1),
.resource = imx_ssi_resources1,
};
static int mx3_devices_init(void)
{
if (cpu_is_mx31()) {
@ -546,7 +584,7 @@ static int mx3_devices_init(void)
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
otg_resources[0].start = MX35_OTG_BASE_ADDR;
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
otg_resources[1].start = MXC_INT_USBOTG;
@ -555,6 +593,10 @@ static int mx3_devices_init(void)
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
mxc_usbh1_resources[1].start = MXC_INT_USBHS;
mxc_usbh1_resources[1].end = MXC_INT_USBHS;
imx_ssi_resources0[1].start = MX35_INT_SSI1;
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
}
return 0;

Просмотреть файл

@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device;
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;

Просмотреть файл

@ -0,0 +1,268 @@
/*
* KZM-ARM11-01 support
* Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
*
* based on code for MX31ADS,
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
#include <linux/types.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/board-kzmarm11.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/memory.h>
#include "devices.h"
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.irqflags = IRQ_TYPE_EDGE_RISING,
.uartclk = 14745600,
.regshift = 0,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_BUGGY_UART,
},
{},
};
static struct resource serial8250_resources[] = {
{
.start = KZM_ARM11_16550,
.end = KZM_ARM11_16550 + 0x10,
.flags = IORESOURCE_MEM,
},
{
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
.num_resources = ARRAY_SIZE(serial8250_resources),
.resource = serial8250_resources,
};
static int __init kzm_init_ext_uart(void)
{
u8 tmp;
/*
* GPIO 1-1: external UART interrupt line
*/
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
/*
* Unmask UART interrupt
*/
tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
return platform_device_register(&serial_device);
}
#else
static inline int kzm_init_ext_uart(void)
{
return 0;
}
#endif
/*
* SMSC LAN9118
*/
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
static struct smsc911x_platform_config kzm_smsc9118_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
static struct resource kzm_smsc9118_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
static struct platform_device kzm_smsc9118_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
.resource = kzm_smsc9118_resources,
.dev = {
.platform_data = &kzm_smsc9118_config,
},
};
static int __init kzm_init_smsc9118(void)
{
/*
* GPIO 1-2: SMSC9118 interrupt line
*/
mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
return platform_device_register(&kzm_smsc9118_device);
}
#else
static inline int kzm_init_smsc9118(void)
{
return 0;
}
#endif
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static void __init kzm_init_imx_uart(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
}
#else
static inline void kzm_init_imx_uart(void)
{
}
#endif
static int kzm_pins[] __initdata = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
MX31_PIN_DCD_DCE1__DCD_DCE1,
MX31_PIN_RI_DCE1__RI_DCE1,
MX31_PIN_DSR_DCE1__DSR_DCE1,
MX31_PIN_DTR_DCE1__DTR_DCE1,
MX31_PIN_CTS2__CTS2,
MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
MX31_PIN_DCD_DTE1__DCD_DTE2,
MX31_PIN_RI_DTE1__RI_DTE2,
MX31_PIN_DSR_DTE1__DSR_DTE2,
MX31_PIN_DTR_DTE1__DTR_DTE2,
};
/*
* Board specific initialization.
*/
static void __init kzm_board_init(void)
{
mxc_iomux_setup_multiple_pins(kzm_pins,
ARRAY_SIZE(kzm_pins), "kzm");
kzm_init_ext_uart();
kzm_init_smsc9118();
kzm_init_imx_uart();
pr_info("Clock input source is 26MHz\n");
}
/*
* This structure defines static mappings for the kzm-arm11-01 board.
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.type = MT_DEVICE
},
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.type = MT_DEVICE
},
};
/*
* Set up static virtual mappings.
*/
static void __init kzm_map_io(void)
{
mx31_map_io();
iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
}
static void __init kzm_timer_init(void)
{
mx31_clocks_init(26000000);
}
static struct sys_timer kzm_timer = {
.init = kzm_timer_init,
};
/*
* The following uses standard kernel macros define in arch.h in order to
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
.init_machine = kzm_board_init,
.timer = &kzm_timer,
MACHINE_END

Просмотреть файл

@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev)
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int mxc_mmc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev,
gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
return ret;

Просмотреть файл

@ -31,6 +31,8 @@
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13783.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -41,6 +43,7 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
#include <mach/spi.h>
#include "devices.h"
@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = {
static struct platform_device *devices[] __initdata = {
&smsc91x_device,
&physmap_flash_device,
&mxc_i2c_device1,
};
/* SPI */
static int spi_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
static struct spi_imx_master spi0_pdata = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
static struct spi_imx_master spi1_pdata = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
static struct mc13783_platform_data mc13783_pdata __initdata = {
.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
};
static struct spi_board_info mc13783_dev __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
};
static int mx31lilly_baseboard;
@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void)
}
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
/* SPI */
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_dev, 1);
platform_add_devices(devices, ARRAY_SIZE(devices));
}

Просмотреть файл

@ -0,0 +1,198 @@
/*
* LogicPD i.MX31 SOM-LV development board support
*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
*
* based on code for other MX31 boards,
*
* Copyright 2005-2007 Freescale Semiconductor
* Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lite.h>
#include <mach/mmc.h>
#include <mach/spi.h>
#include "devices.h"
/*
* This file contains board-specific initialization routines for the
* LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
* If you design an own baseboard for the module, use this file as base
* for support code.
*/
static unsigned int litekit_db_board_pins[] __initdata = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* SPI 0 */
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
};
/* UART */
static struct imxuart_platform_data uart_pdata __initdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
/* MMC */
static int gpio_det, gpio_wp;
#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int mxc_mmc1_get_ro(struct device *dev)
{
return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
}
static int mxc_mmc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
int ret;
gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
return ret;
ret = gpio_request(gpio_wp, "MMC w/p");
if (ret)
goto exit_free_det;
gpio_direction_input(gpio_det);
gpio_direction_input(gpio_wp);
ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
return 0;
exit_free_wp:
gpio_free(gpio_wp);
exit_free_det:
gpio_free(gpio_det);
return ret;
}
static void mxc_mmc1_exit(struct device *dev, void *data)
{
gpio_free(gpio_det);
gpio_free(gpio_wp);
free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
}
static struct imxmmc_platform_data mmc_pdata = {
.get_ro = mxc_mmc1_get_ro,
.init = mxc_mmc1_init,
.exit = mxc_mmc1_exit,
};
/* SPI */
static int spi_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
static struct spi_imx_master spi0_pdata = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
/* GPIO LEDs */
static struct gpio_led litekit_leds[] = {
{
.name = "GPIO0",
.gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
.active_low = 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "GPIO1",
.gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
.active_low = 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}
};
static struct gpio_led_platform_data litekit_led_platform_data = {
.leds = litekit_leds,
.num_leds = ARRAY_SIZE(litekit_leds),
};
static struct platform_device litekit_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &litekit_led_platform_data,
},
};
void __init mx31lite_db_init(void)
{
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
ARRAY_SIZE(litekit_db_board_pins),
"development board pins");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
}

Просмотреть файл

@ -2,6 +2,7 @@
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -25,38 +26,47 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/board-mx31lite.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/irqs.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
/*
* This file contains the board-specific initialization routines.
* This file contains the module-specific initialization routines.
*/
static unsigned int mx31lite_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
};
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
/* SPI 1 */
MX31_PIN_CSPI2_SCLK__SCLK,
MX31_PIN_CSPI2_MOSI__MOSI,
MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0,
MX31_PIN_CSPI2_SS1__SS1,
MX31_PIN_CSPI2_SS2__SS2,
};
static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@ -92,6 +102,111 @@ static struct platform_device smsc911x_device = {
},
};
/*
* SPI
*
* The MC13783 is the only hard-wired SPI device on the module.
*/
static int spi_internal_chipselect[] = {
MXC_SPI_CS(0),
};
static struct spi_imx_master spi1_pdata = {
.chipselect = spi_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
};
static struct mc13783_platform_data mc13783_pdata __initdata = {
.flags = MC13783_USE_RTC |
MC13783_USE_REGULATOR,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &mc13783_pdata,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
};
/*
* USB
*/
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbh2_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_USBH2_CLK__USBH2_CLK,
MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT,
MX31_PIN_USBH2_STP__USBH2_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
"USBH2_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
return 0;
}
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
/*
* NOR flash
*/
static struct physmap_flash_data nor_flash_data = {
.width = 2,
};
static struct resource nor_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device physmap_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nor_flash_data,
},
.resource = &nor_flash_resource,
.num_resources = 1,
};
/*
* This structure defines the MX31 memory map.
*/
@ -118,19 +233,40 @@ void __init mx31lite_map_io(void)
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
/*
* Board specific initialization.
*/
static int mx31lite_baseboard;
core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
static void __init mxc_board_init(void)
{
int ret;
switch (mx31lite_baseboard) {
case MX31LITE_NOBOARD:
break;
case MX31LITE_DB:
mx31lite_db_init();
break;
default:
printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
mx31lite_baseboard);
}
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
/* NOR and NAND flash */
platform_device_register(&physmap_flash_device);
mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
mxc_register_device(&mxc_spi_device1, &spi1_pdata);
spi_register_board_info(&mc13783_spi_dev, 1);
/* USB */
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
@ -150,12 +286,7 @@ struct sys_timer mx31lite_timer = {
.init = mx31lite_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
* initialize __mach_desc_MX31LITE data structure.
*/
MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,

Просмотреть файл

@ -22,11 +22,15 @@
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = {
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
/* USB H1 */
MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
};
static struct imxuart_platform_data uart_pdata = {
@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = {
.exit = devboard_sdhc2_exit,
};
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int devboard_usbh1_hw_init(struct platform_device *pdev)
{
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
return 0;
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
static int devboard_isp1105_init(struct otg_transceiver *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
return ret;
/* single ended */
gpio_direction_output(USBH1_MODE, 0);
ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
if (ret) {
gpio_free(USBH1_MODE);
return ret;
}
gpio_direction_output(USBH1_VBUSEN_B, 1);
return 0;
}
static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
else
gpio_set_value(USBH1_VBUSEN_B, 1);
return 0;
}
static struct mxc_usbh_platform_data usbh1_pdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init devboard_usbh1_init(void)
{
struct otg_transceiver *otg;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
return -ENOMEM;
otg->label = "ISP1105";
otg->init = devboard_isp1105_init;
otg->set_vbus = devboard_isp1105_set_vbus;
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
}
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void)
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
devboard_usbh1_init();
}

Просмотреть файл

@ -16,17 +16,26 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
#include "devices.h"
@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = {
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
/* CSI */
MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = {
MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
MX31_PIN_TXD2__GPIO1_28,
/* dsPIC resets */
MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
/*battery detection */
MX31_PIN_LCS0__GPIO3_23,
/* USB H1 */
MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@ -120,6 +137,166 @@ static void dspics_resets_init(void)
}
}
static struct spi_board_info marxbot_spi_board_info[] __initdata = {
{
.modalias = "spidev",
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 1, /* according spi1_cs[] ! */
},
};
#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2)
static int marxbot_basecam_power(struct device *dev, int on)
{
gpio_set_value(BASECAM_POWER, !on);
return 0;
}
static int marxbot_basecam_reset(struct device *dev)
{
gpio_set_value(BASECAM_RST_B, 0);
udelay(100);
gpio_set_value(BASECAM_RST_B, 1);
return 0;
}
static struct i2c_board_info marxbot_i2c_devices[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
},
};
static struct soc_camera_link base_iclink = {
.bus_id = 0, /* Must match with the camera ID */
.power = marxbot_basecam_power,
.reset = marxbot_basecam_reset,
.board_info = &marxbot_i2c_devices[0],
.i2c_adapter_id = 0,
.module_name = "mt9t031",
};
static struct platform_device marxbot_camera[] = {
{
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &base_iclink,
},
},
};
static struct platform_device *marxbot_cameras[] __initdata = {
&marxbot_camera[0],
};
static int __init marxbot_cam_init(void)
{
int ret = gpio_request(CAM_CHOICE, "cam-choice");
if (ret)
return ret;
gpio_direction_output(CAM_CHOICE, 1);
ret = gpio_request(BASECAM_RST_B, "basecam-reset");
if (ret)
return ret;
gpio_direction_output(BASECAM_RST_B, 1);
ret = gpio_request(BASECAM_POWER, "basecam-standby");
if (ret)
return ret;
gpio_direction_output(BASECAM_POWER, 0);
ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
if (ret)
return ret;
gpio_direction_output(TURRETCAM_RST_B, 1);
ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
if (ret)
return ret;
gpio_direction_output(TURRETCAM_POWER, 0);
return 0;
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int marxbot_usbh1_hw_init(struct platform_device *pdev)
{
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
return 0;
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
static int marxbot_isp1105_init(struct otg_transceiver *otg)
{
int ret = gpio_request(USBH1_MODE, "usbh1-mode");
if (ret)
return ret;
/* single ended */
gpio_direction_output(USBH1_MODE, 0);
ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
if (ret) {
gpio_free(USBH1_MODE);
return ret;
}
gpio_direction_output(USBH1_VBUSEN_B, 1);
return 0;
}
static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
{
if (on)
gpio_set_value(USBH1_VBUSEN_B, 0);
else
gpio_set_value(USBH1_VBUSEN_B, 1);
return 0;
}
static struct mxc_usbh_platform_data usbh1_pdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init marxbot_usbh1_init(void)
{
struct otg_transceiver *otg;
otg = kzalloc(sizeof(*otg), GFP_KERNEL);
if (!otg)
return -ENOMEM;
otg->label = "ISP1105";
otg->init = marxbot_isp1105_init;
otg->set_vbus = marxbot_isp1105_set_vbus;
usbh1_pdata.otg = otg;
return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
}
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void)
dspics_resets_init();
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
spi_register_board_info(marxbot_spi_board_info,
ARRAY_SIZE(marxbot_spi_board_info));
marxbot_cam_init();
platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
/* battery present pin */
gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
marxbot_usbh1_init();
}

Просмотреть файл

@ -17,6 +17,7 @@
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
@ -26,8 +27,14 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@ -37,16 +44,20 @@
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/mx31.h>
#include <mach/mxc_ehci.h>
#include <mach/mx3_camera.h>
#include <mach/spi.h>
#include <mach/ulpi.h>
#include "devices.h"
static unsigned int moboard_pins[] = {
/* UART0 */
MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
MX31_PIN_CTS1__GPIO2_7,
/* UART4 */
MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = {
MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
MX31_PIN_USB_OC__GPIO1_30,
/* USB H2 */
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
MX31_PIN_SCK6__GPIO1_25,
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
/* SPI1 */
MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
/* Atlas IRQ */
MX31_PIN_GPIO1_3__GPIO1_3,
/* SPI2 */
MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI2_SS1__CSPI3_SS1,
};
static struct physmap_flash_data mx31moboard_flash_data = {
@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = {
.num_resources = 1,
};
static struct imxuart_platform_data uart_pdata = {
static int moboard_uart0_init(struct platform_device *pdev)
{
gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
return 0;
}
static struct imxuart_platform_data uart0_pdata = {
.init = moboard_uart0_init,
};
static struct imxuart_platform_data uart4_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
.bitrate = 100000,
};
static int moboard_spi1_cs[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(2),
};
static struct spi_imx_master moboard_spi1_master = {
.chipselect = moboard_spi1_cs,
.num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
};
static struct regulator_consumer_supply sdhc_consumers[] = {
{
.dev = &mxcsdhc_device0.dev,
.supply = "sdhc0_vcc",
},
{
.dev = &mxcsdhc_device1.dev,
.supply = "sdhc1_vcc",
},
};
static struct regulator_init_data sdhc_vreg_data = {
.constraints = {
.min_uV = 2700000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_FAST,
.always_on = 0,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
.consumer_supplies = sdhc_consumers,
};
static struct regulator_consumer_supply cam_consumers[] = {
{
.dev = &mx3_camera.dev,
.supply = "cam_vcc",
},
};
static struct regulator_init_data cam_vreg_data = {
.constraints = {
.min_uV = 2700000,
.max_uV = 3000000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
.valid_modes_mask = REGULATOR_MODE_NORMAL |
REGULATOR_MODE_FAST,
.always_on = 0,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
.consumer_supplies = cam_consumers,
};
static struct mc13783_regulator_init_data moboard_regulators[] = {
{
.id = MC13783_REGU_VMMC1,
.init_data = &sdhc_vreg_data,
},
{
.id = MC13783_REGU_VCAM,
.init_data = &cam_vreg_data,
},
};
static struct mc13783_platform_data moboard_pmic = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
MC13783_USE_ADC,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
.platform_data = &moboard_pmic,
.mode = SPI_CS_HIGH,
},
};
static int moboard_spi2_cs[] = {
MXC_SPI_CS(1),
};
static struct spi_imx_master moboard_spi2_master = {
.chipselect = moboard_spi2_cs,
.num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
};
#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
@ -208,6 +346,56 @@ static struct fsl_usb2_platform_data usb_pdata = {
.phy_mode = FSL_USB2_PHY_ULPI,
};
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
{
int ret = gpio_request(USBH2_EN_B, "usbh2-en");
if (ret)
return ret;
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
gpio_direction_output(USBH2_EN_B, 0);
return 0;
}
static int moboard_usbh2_hw_exit(struct platform_device *pdev)
{
gpio_free(USBH2_EN_B);
return 0;
}
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = moboard_usbh2_hw_init,
.exit = moboard_usbh2_hw_exit,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init moboard_usbh2_init(void)
{
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
}
static struct gpio_led mx31moboard_leds[] = {
{
.name = "coreboard-led-0:red:running",
@ -266,11 +454,48 @@ static void mx31moboard_init_sel_gpios(void)
}
}
static struct ipu_platform_data mx3_ipu_data = {
.irq_base = MXC_IPU_IRQ_START,
};
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
&mx31moboard_leds_device,
};
static struct mx3_camera_pdata camera_pdata = {
.dma_dev = &mx3_ipu.dev,
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 4800,
};
#define CAMERA_BUF_SIZE (4*1024*1024)
static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
{
dma_addr_t dma_handle;
void *buf;
int dma;
if (buf_size < 2 * 1024 * 1024)
return -EINVAL;
buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
if (!buf) {
pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
return -ENOMEM;
}
memset(buf, 0, buf_size);
dma = dma_declare_coherent_memory(&mx3_camera.dev,
dma_handle, dma_handle, buf_size,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
/* The way we call dma_declare_coherent_memory only a malloc can fail */
return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
}
static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
@ -284,20 +509,34 @@ static void __init mxc_board_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device4, &uart_pdata);
mxc_register_device(&mxc_uart_device0, &uart0_pdata);
mxc_register_device(&mxc_uart_device4, &uart4_pdata);
mx31moboard_init_sel_gpios();
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
spi_register_board_info(moboard_spi_board_info,
ARRAY_SIZE(moboard_spi_board_info));
mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
mxc_register_device(&mx3_camera, &camera_pdata);
usb_xcvr_reset();
moboard_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
moboard_usbh2_init();
switch (mx31moboard_baseboard) {
case MX31NOBOARD:

Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = {
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
/* USBOTG */
MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
};
/* OTG config */
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
/*
@ -81,6 +91,8 @@ static void __init mxc_board_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init mx35pdk_timer_init(void)

Просмотреть файл

@ -43,6 +43,7 @@
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include "devices.h"
@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = {
MX35_PAD_ATA_CS0__GPIO2_6,
};
static struct mxc_nand_platform_data pcm037_nand_board_info = {
.width = 1,
.hw_ecc = 1,
};
/*
* Board specific initialization.
*/
@ -216,6 +222,7 @@ static void __init mxc_board_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxc_uart_device1, &uart_pdata);

Просмотреть файл

@ -2,34 +2,105 @@ if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
if PXA3xx
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
menu "Supported PXA3xx Processor Variants"
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform (aka Lubbock)"
select PXA25x
select SA1111
select PXA_HAVE_BOARD_IRQS
config CPU_PXA300
bool "PXA300 (codename Monahans-L)"
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
select PXA27x
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config CPU_PXA310
bool "PXA310 (codename Monahans-LV)"
config MACH_ZYLONITE
bool
select PXA3xx
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_ZYLONITE300
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
select CPU_PXA310
select MACH_ZYLONITE
config CPU_PXA320
bool "PXA320 (codename Monahans-P)"
config MACH_ZYLONITE320
bool "PXA3xx Development Platform (aka Zylonite) PXA320"
select CPU_PXA320
select MACH_ZYLONITE
config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
config CPU_PXA950
bool "PXA950 (codename Tavor-PV2)"
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
endmenu
comment "Third Party Dev Platforms (sorted by vendor name)"
endif
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
config MACH_BALLOON3
bool "Balloon 3 board"
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable support for CSB701 baseboard"
depends on MACH_CSB726
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
select PXA25x
select PXA_SSP
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
@ -62,11 +133,56 @@ config MACH_STARGATE2
select IWMMXT
select PXA_HAVE_BOARD_IRQS
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select SA1111
select PXA_HAVE_BOARD_IRQS
select MTD
select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
select PXA_SSP
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
@ -74,25 +190,215 @@ config MACH_LOGICPD_PXA270
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
select PXA_HAVE_BOARD_IRQS
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
select CPU_PXA300
select CPU_PXA310
select HAVE_PWM
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
comment "End-user Products (sorted by vendor name)"
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
config MACH_BALLOON3
bool "Balloon 3 board"
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PXA_HAVE_BOARD_IRQS
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config PALM_TREO
bool
depends on ARCH_PXA_PALM
config MACH_CENTRO
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
smartphone.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
select PALM_TREO
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@ -169,15 +475,6 @@ config MACH_TOSA
select PXA25x
select PXA_HAVE_BOARD_IRQS
config ARCH_VIPER
bool "Arcom/Eurotech VIPER SBC"
select PXA25x
select ISA
select I2C_GPIO
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
select PXA_HAVE_ISA_IRQS
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
@ -234,297 +531,6 @@ config MACH_E800
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config TRIZEPS_PXA
bool "PXA based Keith und Koep Trizeps DIMM-Modules"
config MACH_H5000
bool "HP iPAQ h5000"
select PXA25x
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
config MACH_TRIZEPS4WL
bool "Keith und Koep Trizeps4-WL DIMM-Module"
depends on TRIZEPS_PXA
select TRIZEPS_PCMCIA
select PXA27x
select PXA_SSP
choice
prompt "Select base board for Trizeps module"
depends on TRIZEPS_PXA
config MACH_TRIZEPS_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS_UCONXS
bool "uConXS Eval Board"
config MACH_TRIZEPS_ANY
bool "another Board"
endchoice
config TRIZEPS_PCMCIA
bool
help
Enable PCMCIA support for Trizeps modules
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_EXEDA
bool "CompuLab eXeda platform"
select PXA27x
config MACH_COLIBRI
bool "Toradex Colibri PXA270"
select PXA27x
config MACH_COLIBRI300
bool "Toradex Colibri PXA300/310"
select PXA3xx
select CPU_PXA300
config MACH_COLIBRI320
bool "Toradex Colibri PXA320"
select PXA3xx
select CPU_PXA320
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
select PXA27x
select IWMMXT
select PXA25x
select PXA_SSP
config MACH_CM_X300
bool "CompuLab CM-X300 modules"
select PXA3xx
select CPU_PXA300
config MACH_H4700
bool "HP iPAQ hx4700"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
select FB_W100
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select PXA27x
select IWMMXT
select HAVE_PWM
select GPIO_SYSFS
help
Say Y here if you intend to run this kernel on a
MIO A701. Currently there is only basic support
for this PDA.
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
select PXA_HAVE_BOARD_IRQS
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALMTE2
bool "Palm Tungsten|E2"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
config MACH_PALMTC
bool "Palm Tungsten|C"
default y
depends on ARCH_PXA_PALM
select PXA25x
help
Say Y here if you intend to run this kernel on a Palm Tungsten|C
handheld computer.
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
handheld computer.
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PALMZ72
bool "Palm Zire 72"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Zire 72
handheld computer.
config MACH_TREO680
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on Palm Treo 680
smartphone.
config MACH_PALMLD
bool "Palm LifeDrive"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm LifeDrive
handheld computer.
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config MACH_CSB726
bool "Enable Cogent CSB726 System On a Module"
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Cogent
CSB726 System On Module.
config CSB726_CSB701
bool "Enable supprot for CSB701 baseboard"
depends on MACH_CSB726
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
config MACH_XCEP
bool "Iskratel Electronics XCEP"
select PXA25x
select MTD
select MTD_PARTITIONS
select MTD_PHYSMAP
select MTD_CFI_INTELEXT
select MTD_CFI
select MTD_CHAR
select SMC91X
select PXA_SSP
help
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
Tuned for usage in Libera instruments for particle accelerators.
endmenu
config PXA25x
@ -551,6 +557,42 @@ config PXA3xx
help
Select code specific to PXA3xx variants
config CPU_PXA300
bool
select PXA3xx
help
PXA300 (codename Monahans-L)
config CPU_PXA310
bool
select CPU_PXA300
help
PXA310 (codename Monahans-LV)
config CPU_PXA320
bool
select PXA3xx
help
PXA320 (codename Monahans-P)
config CPU_PXA930
bool
select PXA3xx
help
PXA930 (codename Tavor-P)
config CPU_PXA935
bool
select CPU_PXA930
help
PXA935 (codename Tavor-P65)
config CPU_PXA950
bool
select CPU_PXA930
help
PXA950 (codename Tavor-PV2)
config PXA_SHARP_C7xx
bool
select PXA_SSP

Просмотреть файл

@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support
# NOTE: keep the order of boards in accordance to their order in Kconfig
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
# End-user Products
obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_H5000) += h5000.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o
@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740) += e740.o
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
obj-$(CONFIG_MACH_TREO680) += treo680.o
obj-$(CONFIG_ARCH_VIPER) += viper.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
endif
obj-$(CONFIG_TOSA_BT) += tosa-bt.o

Просмотреть файл

@ -306,6 +306,10 @@ static void __init balloon3_init(void)
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
if (balloon3_has(BALLOON3_FEATURE_AUDIO))
pxa_set_ac97_info(NULL);

Просмотреть файл

@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
static void __init cmx2xx_init(void)
{
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
cmx2xx_pm_init();
if (cpu_is_pxa25x())

Просмотреть файл

@ -3,9 +3,10 @@
*
* Support for the CompuLab CM-X300 modules
*
* Copyright (C) 2008 CompuLab Ltd.
* Copyright (C) 2008,2009 CompuLab Ltd.
*
* Mike Rapoport <mike@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -16,30 +17,41 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/mfd/da903x.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/spi/tdo24m.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <mach/pxa300.h>
#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include <mach/pxa3xx_nand.h>
#include <plat/pxa3xx_nand.h>
#include <mach/audio.h>
#include <asm/mach/map.h>
#include "generic.h"
#include "devices.h"
#define CM_X300_ETH_PHYS 0x08000010
@ -53,7 +65,7 @@
#define GPIO97_RTC_RD (97)
#define GPIO98_RTC_IO (98)
static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
GPIO55_LCD_LDD_1,
@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
GPIO36_UART1_DTR,
/* GPIOs */
GPIO79_GPIO, /* LED */
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
/* PWM Backlight */
GPIO19_PWM2_OUT,
};
static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
/* GPIOs */
GPIO79_GPIO, /* LED */
GPIO77_GPIO, /* WiFi reset */
GPIO78_GPIO, /* BT reset */
};
static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
/* GPIOs */
GPIO76_GPIO, /* LED */
GPIO71_GPIO, /* WiFi reset */
GPIO70_GPIO, /* BT reset */
};
static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
/* USB PORT 2 */
ULPI_STP,
ULPI_NXT,
ULPI_DIR,
GPIO30_ULPI_DATA_OUT_0,
GPIO31_ULPI_DATA_OUT_1,
GPIO32_ULPI_DATA_OUT_2,
GPIO33_ULPI_DATA_OUT_3,
GPIO34_ULPI_DATA_OUT_4,
GPIO35_ULPI_DATA_OUT_5,
GPIO36_ULPI_DATA_OUT_6,
GPIO37_ULPI_DATA_OUT_7,
GPIO38_ULPI_CLK,
/* external PHY reset pin */
GPIO127_GPIO,
/* USB PORT 3 */
GPIO77_USB_P3_1,
GPIO78_USB_P3_2,
GPIO79_USB_P3_3,
GPIO80_USB_P3_4,
GPIO81_USB_P3_5,
GPIO82_USB_P3_6,
GPIO0_2_USBH_PEN,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
static inline void cm_x300_init_dm9000(void) {}
#endif
/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info cm_x300_lcd_modes[] = {
[0] = {
.pixclock = 38000,
.pixclock = 38250,
.bpp = 16,
.xres = 480,
.yres = 640,
.hsync_len = 8,
.vsync_len = 2,
.left_margin = 8,
.upper_margin = 0,
.upper_margin = 2,
.right_margin = 24,
.lower_margin = 4,
.cmap_greyscale = 0,
@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
static struct pxafb_mach_info cm_x300_lcd = {
.modes = cm_x300_lcd_modes,
.num_modes = 2,
.num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
static inline void cm_x300_init_lcd(void) {}
#endif
#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
static struct platform_pwm_backlight_data cm_x300_backlight_data = {
.pwm_id = 2,
.max_brightness = 100,
.dft_brightness = 100,
.pwm_period_ns = 10000,
};
static struct platform_device cm_x300_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &cm_x300_backlight_data,
},
};
static void cm_x300_init_bl(void)
{
platform_device_register(&cm_x300_backlight_device);
}
#else
static inline void cm_x300_init_bl(void) {}
#endif
#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
#define GPIO_LCD_BASE (144)
#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
#define LCD_SPI_BUS_NUM (1)
static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
.sck = GPIO_LCD_SCL,
.mosi = GPIO_LCD_DIN,
.miso = GPIO_LCD_DOUT,
.num_chipselect = 1,
};
static struct platform_device cm_x300_spi_gpio = {
.name = "spi_gpio",
.id = LCD_SPI_BUS_NUM,
.dev = {
.platform_data = &cm_x300_spi_gpio_pdata,
},
};
static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
.model = TDO35S,
};
static struct spi_board_info cm_x300_spi_devices[] __initdata = {
{
.modalias = "tdo24m",
.max_speed_hz = 1000000,
.bus_num = LCD_SPI_BUS_NUM,
.chip_select = 0,
.controller_data = (void *) GPIO_LCD_CS,
.platform_data = &cm_x300_tdo24m_pdata,
},
};
static void __init cm_x300_init_spi(void)
{
spi_register_board_info(cm_x300_spi_devices,
ARRAY_SIZE(cm_x300_spi_devices));
platform_device_register(&cm_x300_spi_gpio);
}
#else
static inline void cm_x300_init_spi(void) {}
#endif
#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
static void __init cm_x300_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void cm_x300_init_ac97(void) {}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition cm_x300_nand_partitions[] = {
[0] = {
@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cm_x300_ohci_init(struct device *dev)
{
if (cpu_is_pxa300())
UP2OCR = UP2OCR_HXS
| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
return 0;
}
static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
.init = cm_x300_ohci_init,
};
static void __init cm_x300_init_ohci(void)
@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
[0] = {
.name = "cm-x300:green",
.default_trigger = "heartbeat",
.gpio = 79,
.active_low = 1,
},
};
@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
static void __init cm_x300_init_leds(void)
{
if (system_rev < 130)
cm_x300_leds[0].gpio = 79;
else
cm_x300_leds[0].gpio = 76;
platform_device_register(&cm_x300_led_device);
}
#else
@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
static inline void cm_x300_init_rtc(void) {}
#endif
static void __init cm_x300_init(void)
/* DA9030 */
struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
{
.name = "da903x-backlight",
.id = DA9030_ID_WLED,
}
};
static struct da903x_platform_data cm_x300_da9030_info = {
.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
.subdevs = cm_x300_da9030_subdevs,
};
static struct i2c_board_info cm_x300_pmic_info = {
I2C_BOARD_INFO("da9030", 0x49),
.irq = IRQ_GPIO(0),
.platform_data = &cm_x300_da9030_info,
};
static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
.use_pio = 1,
};
static void __init cm_x300_init_da9030(void)
{
pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
i2c_register_board_info(1, &cm_x300_pmic_info, 1);
}
static void __init cm_x300_init_wi2wi(void)
{
int bt_reset, wlan_en;
int err;
if (system_rev < 130) {
wlan_en = 77;
bt_reset = 78;
} else {
wlan_en = 71;
bt_reset = 70;
}
/* Libertas and CSR reset */
err = gpio_request(wlan_en, "wlan en");
if (err) {
pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
} else {
gpio_direction_output(wlan_en, 1);
gpio_free(wlan_en);
}
err = gpio_request(bt_reset, "bt reset");
if (err) {
pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
} else {
gpio_direction_output(bt_reset, 1);
udelay(10);
gpio_set_value(bt_reset, 0);
udelay(10);
gpio_set_value(bt_reset, 1);
gpio_free(bt_reset);
}
}
/* MFP */
static void __init cm_x300_init_mfp(void)
{
/* board-processor specific GPIO initialization */
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
if (system_rev < 130)
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
else
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
if (cpu_is_pxa310())
pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
}
static void __init cm_x300_init(void)
{
cm_x300_init_mfp();
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
cm_x300_init_da9030();
cm_x300_init_dm9000();
cm_x300_init_lcd();
cm_x300_init_ohci();
@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
cm_x300_init_nand();
cm_x300_init_leds();
cm_x300_init_i2c();
cm_x300_init_spi();
cm_x300_init_rtc();
cm_x300_init_ac97();
cm_x300_init_wi2wi();
cm_x300_init_bl();
}
static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше