gpio: sa1100: convert to use IO accessors

Use IO accessors to access the SA1100 registers rather than accessing
them directly.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Russell King 2016-08-31 08:49:44 +01:00 коммит произвёл Linus Walleij
Родитель 9dd4819ed5
Коммит 07242b2481
1 изменённых файлов: 125 добавлений и 76 удалений

Просмотреть файл

@ -16,54 +16,85 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
struct sa1100_gpio_chip {
struct gpio_chip chip;
void __iomem *membase;
int irqbase;
u32 irqmask;
u32 irqrising;
u32 irqfalling;
u32 irqwake;
};
#define sa1100_gpio_chip(x) container_of(x, struct sa1100_gpio_chip, chip)
enum {
R_GPLR = 0x00,
R_GPDR = 0x04,
R_GPSR = 0x08,
R_GPCR = 0x0c,
R_GRER = 0x10,
R_GFER = 0x14,
R_GEDR = 0x18,
R_GAFR = 0x1c,
};
static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return !!(GPLR & GPIO_GPIO(offset));
return readl_relaxed(sa1100_gpio_chip(chip)->membase + R_GPLR) &
BIT(offset);
}
static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
if (value)
GPSR = GPIO_GPIO(offset);
else
GPCR = GPIO_GPIO(offset);
int reg = value ? R_GPSR : R_GPCR;
writel_relaxed(BIT(offset), sa1100_gpio_chip(chip)->membase + reg);
}
static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
{
void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR;
unsigned long flags;
local_irq_save(flags);
GPDR &= ~GPIO_GPIO(offset);
writel_relaxed(readl_relaxed(gpdr) & ~BIT(offset), gpdr);
local_irq_restore(flags);
return 0;
}
static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
void __iomem *gpdr = sa1100_gpio_chip(chip)->membase + R_GPDR;
unsigned long flags;
local_irq_save(flags);
sa1100_gpio_set(chip, offset, value);
GPDR |= GPIO_GPIO(offset);
writel_relaxed(readl_relaxed(gpdr) | BIT(offset), gpdr);
local_irq_restore(flags);
return 0;
}
static int sa1100_to_irq(struct gpio_chip *chip, unsigned offset)
{
return IRQ_GPIO0 + offset;
return sa1100_gpio_chip(chip)->irqbase + offset;
}
static struct gpio_chip sa1100_gpio_chip = {
.label = "gpio",
.direction_input = sa1100_direction_input,
.direction_output = sa1100_direction_output,
.set = sa1100_gpio_set,
.get = sa1100_gpio_get,
.to_irq = sa1100_to_irq,
.base = 0,
.ngpio = GPIO_MAX + 1,
static struct sa1100_gpio_chip sa1100_gpio_chip = {
.chip = {
.label = "gpio",
.direction_input = sa1100_direction_input,
.direction_output = sa1100_direction_output,
.set = sa1100_gpio_set,
.get = sa1100_gpio_get,
.to_irq = sa1100_to_irq,
.base = 0,
.ngpio = GPIO_MAX + 1,
},
.membase = (void *)&GPLR,
.irqbase = IRQ_GPIO0,
};
/*
@ -71,34 +102,39 @@ static struct gpio_chip sa1100_gpio_chip = {
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* Use this instead of directly setting GRER/GFER.
*/
static int GPIO_IRQ_rising_edge;
static int GPIO_IRQ_falling_edge;
static int GPIO_IRQ_mask;
static int GPIO_IRQ_wake;
static void sa1100_update_edge_regs(struct sa1100_gpio_chip *sgc)
{
void *base = sgc->membase;
u32 grer, gfer;
grer = sgc->irqrising & sgc->irqmask;
gfer = sgc->irqfalling & sgc->irqmask;
writel_relaxed(grer, base + R_GRER);
writel_relaxed(gfer, base + R_GFER);
}
static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
{
unsigned int mask;
mask = BIT(d->hwirq);
struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
unsigned int mask = BIT(d->hwirq);
if (type == IRQ_TYPE_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
if ((sgc->irqrising | sgc->irqfalling) & mask)
return 0;
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= mask;
sgc->irqrising |= mask;
else
GPIO_IRQ_rising_edge &= ~mask;
sgc->irqrising &= ~mask;
if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= mask;
sgc->irqfalling |= mask;
else
GPIO_IRQ_falling_edge &= ~mask;
sgc->irqfalling &= ~mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
sa1100_update_edge_regs(sgc);
return 0;
}
@ -108,37 +144,40 @@ static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
*/
static void sa1100_gpio_ack(struct irq_data *d)
{
GEDR = BIT(d->hwirq);
struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
writel_relaxed(BIT(d->hwirq), sgc->membase + R_GEDR);
}
static void sa1100_gpio_mask(struct irq_data *d)
{
struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask &= ~mask;
sgc->irqmask &= ~mask;
GRER &= ~mask;
GFER &= ~mask;
sa1100_update_edge_regs(sgc);
}
static void sa1100_gpio_unmask(struct irq_data *d)
{
struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
unsigned int mask = BIT(d->hwirq);
GPIO_IRQ_mask |= mask;
sgc->irqmask |= mask;
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
sa1100_update_edge_regs(sgc);
}
static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
{
struct sa1100_gpio_chip *sgc = irq_data_get_irq_chip_data(d);
int ret = sa11x0_gpio_set_wake(d->hwirq, on);
if (!ret) {
if (on)
GPIO_IRQ_wake |= BIT(d->hwirq);
sgc->irqwake |= BIT(d->hwirq);
else
GPIO_IRQ_wake &= ~BIT(d->hwirq);
sgc->irqwake &= ~BIT(d->hwirq);
}
return ret;
}
@ -158,8 +197,10 @@ static struct irq_chip sa1100_gpio_irq_chip = {
static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
unsigned int irq, irq_hw_number_t hwirq)
{
irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip,
handle_edge_irq);
struct sa1100_gpio_chip *sgc = d->host_data;
irq_set_chip_data(irq, sgc);
irq_set_chip_and_handler(irq, &sa1100_gpio_irq_chip, handle_edge_irq);
irq_set_probe(irq);
return 0;
@ -179,17 +220,19 @@ static struct irq_domain *sa1100_gpio_irqdomain;
*/
static void sa1100_gpio_handler(struct irq_desc *desc)
{
struct sa1100_gpio_chip *sgc = irq_desc_get_handler_data(desc);
unsigned int irq, mask;
void __iomem *gedr = sgc->membase + R_GEDR;
mask = GEDR;
mask = readl_relaxed(gedr);
do {
/*
* clear down all currently active IRQ sources.
* We will be processing them all.
*/
GEDR = mask;
writel_relaxed(mask, gedr);
irq = IRQ_GPIO0;
irq = sgc->irqbase;
do {
if (mask & 1)
generic_handle_irq(irq);
@ -197,30 +240,32 @@ static void sa1100_gpio_handler(struct irq_desc *desc)
irq++;
} while (mask);
mask = GEDR;
mask = readl_relaxed(gedr);
} while (mask);
}
static int sa1100_gpio_suspend(void)
{
struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip;
/*
* Set the appropriate edges for wakeup.
*/
GRER = GPIO_IRQ_wake & GPIO_IRQ_rising_edge;
GFER = GPIO_IRQ_wake & GPIO_IRQ_falling_edge;
writel_relaxed(sgc->irqwake & sgc->irqrising, sgc->membase + R_GRER);
writel_relaxed(sgc->irqwake & sgc->irqfalling, sgc->membase + R_GFER);
/*
* Clear any pending GPIO interrupts.
*/
GEDR = GEDR;
writel_relaxed(readl_relaxed(sgc->membase + R_GEDR),
sgc->membase + R_GEDR);
return 0;
}
static void sa1100_gpio_resume(void)
{
GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
sa1100_update_edge_regs(&sa1100_gpio_chip);
}
static struct syscore_ops sa1100_gpio_syscore_ops = {
@ -236,36 +281,40 @@ static int __init sa1100_gpio_init_devicefs(void)
device_initcall(sa1100_gpio_init_devicefs);
static const int sa1100_gpio_irqs[] __initconst = {
/* Install handlers for GPIO 0-10 edge detect interrupts */
IRQ_GPIO0_SC,
IRQ_GPIO1_SC,
IRQ_GPIO2_SC,
IRQ_GPIO3_SC,
IRQ_GPIO4_SC,
IRQ_GPIO5_SC,
IRQ_GPIO6_SC,
IRQ_GPIO7_SC,
IRQ_GPIO8_SC,
IRQ_GPIO9_SC,
IRQ_GPIO10_SC,
/* Install handler for GPIO 11-27 edge detect interrupts */
IRQ_GPIO11_27,
};
void __init sa1100_init_gpio(void)
{
/* clear all GPIO edge detects */
GFER = 0;
GRER = 0;
GEDR = -1;
struct sa1100_gpio_chip *sgc = &sa1100_gpio_chip;
int i;
gpiochip_add_data(&sa1100_gpio_chip, NULL);
/* clear all GPIO edge detects */
writel_relaxed(0, sgc->membase + R_GFER);
writel_relaxed(0, sgc->membase + R_GRER);
writel_relaxed(-1, sgc->membase + R_GEDR);
gpiochip_add_data(&sa1100_gpio_chip.chip, NULL);
sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
28, IRQ_GPIO0,
&sa1100_gpio_irqdomain_ops, NULL);
/*
* Install handlers for GPIO 0-10 edge detect interrupts
*/
irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
/*
* Install handler for GPIO 11-27 edge detect interrupts
*/
irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
&sa1100_gpio_irqdomain_ops, sgc);
for (i = 0; i < ARRAY_SIZE(sa1100_gpio_irqs); i++)
irq_set_chained_handler_and_data(sa1100_gpio_irqs[i],
sa1100_gpio_handler, sgc);
}