diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index f9bad853deeb..22efa21b1d81 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -227,14 +227,14 @@ config RTC_DRV_AS3722
 	  will be called rtc-as3722.
 
 config RTC_DRV_DS1307
-	tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025, ISL12057"
+	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
 	help
 	  If you say yes here you get support for various compatible RTC
 	  chips (often with battery backup) connected with I2C. This driver
-	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
-	  EPSON RX-8025, Intersil ISL12057 and probably other chips. In some
-	  cases the RTC must already have been initialized (by manufacturing or
-	  a bootloader).
+	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, DS1341,
+	  ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
+	  In some cases the RTC must already have been initialized (by
+	  manufacturing or a bootloader).
 
 	  The first seven registers on these chips hold an RTC, and other
 	  registers may add features such as NVRAM, a trickle charger for
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 3e82ddce620e..6038c49ed68a 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -39,6 +39,7 @@ enum ds_type {
 	ds_1338,
 	ds_1339,
 	ds_1340,
+	ds_1341,
 	ds_1388,
 	ds_3231,
 	m41t0,
@@ -206,6 +207,10 @@ static const struct chip_desc chips[last_ds_type] = {
 		.century_bit	= DS1340_BIT_CENTURY,
 		.trickle_charger_reg = 0x08,
 	},
+	[ds_1341] = {
+		.century_reg	= DS1307_REG_MONTH,
+		.century_bit	= DS1337_BIT_CENTURY,
+	},
 	[ds_1388] = {
 		.offset		= 1,
 		.trickle_charger_reg = 0x0a,
@@ -243,6 +248,7 @@ static const struct i2c_device_id ds1307_id[] = {
 	{ "ds1339", ds_1339 },
 	{ "ds1388", ds_1388 },
 	{ "ds1340", ds_1340 },
+	{ "ds1341", ds_1341 },
 	{ "ds3231", ds_3231 },
 	{ "m41t0", m41t0 },
 	{ "m41t00", m41t00 },
@@ -286,6 +292,10 @@ static const struct of_device_id ds1307_of_match[] = {
 		.compatible = "dallas,ds1340",
 		.data = (void *)ds_1340
 	},
+	{
+		.compatible = "dallas,ds1341",
+		.data = (void *)ds_1341
+	},
 	{
 		.compatible = "maxim,ds3231",
 		.data = (void *)ds_3231
@@ -332,6 +342,7 @@ static const struct acpi_device_id ds1307_acpi_ids[] = {
 	{ .id = "DS1339", .driver_data = ds_1339 },
 	{ .id = "DS1388", .driver_data = ds_1388 },
 	{ .id = "DS1340", .driver_data = ds_1340 },
+	{ .id = "DS1341", .driver_data = ds_1341 },
 	{ .id = "DS3231", .driver_data = ds_3231 },
 	{ .id = "M41T0", .driver_data = m41t0 },
 	{ .id = "M41T00", .driver_data = m41t00 },
@@ -1408,6 +1419,7 @@ static int ds1307_probe(struct i2c_client *client,
 	switch (ds1307->type) {
 	case ds_1337:
 	case ds_1339:
+	case ds_1341:
 	case ds_3231:
 		/* get registers that the "rtc" read below won't read... */
 		err = regmap_bulk_read(ds1307->regmap, DS1337_REG_CONTROL,