microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ata: remove FIT() macro 

Use the kernel-provided clamp_val() macro.

FIT was always applied to a member of struct ata_timing (unsigned short)
and two constants.  clamp_val will not cast to short anymore.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Harvey Harrison 2008-05-14 16:17:00 -07:00 коммит произвёл Jeff Garzik
Родитель 06aaca3f63
Коммит 07633b5d07
10 изменённых файлов: 64 добавлений и 66 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

10
drivers/ata/pata_ali.c
Просмотреть файл

@ -177,11 +177,11 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru
u8 udma;
if (t != NULL) {
t->setup = FIT(t->setup, 1, 8) & 7;
t->act8b = FIT(t->act8b, 1, 8) & 7;
t->rec8b = FIT(t->rec8b, 1, 16) & 15;
t->active = FIT(t->active, 1, 8) & 7;
t->recover = FIT(t->recover, 1, 16) & 15;
t->setup = clamp_val(t->setup, 1, 8) & 7;
t->act8b = clamp_val(t->act8b, 1, 8) & 7;
t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
t->active = clamp_val(t->active, 1, 8) & 7;
t->recover = clamp_val(t->recover, 1, 16) & 15;
pci_write_config_byte(pdev, cas, t->setup);
pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);

14
drivers/ata/pata_amd.c
Просмотреть файл

@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
/* Configure the address set up timing */
pci_read_config_byte(pdev, offset + 0x0C, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(pdev, offset + 0x0C , t);
/* Configure the 8bit I/O timing */
pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
/* Drive timing */
pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
switch (clock) {
case 1:
t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
break;
case 2:
t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
break;
case 3:
t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
break;
case 4:
t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
break;
default:

8
drivers/ata/pata_cypress.c
Просмотреть файл

@ -62,14 +62,14 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
return;
}
time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
if (adev->devno == 0) {
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0x0F; /* Mask bits */
addr |= FIT(t.setup, 0, 15);
addr |= clamp_val(t.setup, 0, 15);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@ -79,7 +79,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0xF0; /* Mask bits */
addr |= (FIT(t.setup, 0, 15) << 4);
addr |= (clamp_val(t.setup, 0, 15) << 4);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);

50
drivers/ata/pata_legacy.c
Просмотреть файл

@ -343,8 +343,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
active = FIT(t.active, 2, 15);
recover = FIT(t.recover, 4, 15);
active = clamp_val(t.active, 2, 15);
recover = clamp_val(t.recover, 4, 15);
inb(0x3E6);
inb(0x3E6);
@ -377,8 +377,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
active = FIT(t.active, 2, 15);
recover = FIT(t.recover, 2, 16);
active = clamp_val(t.active, 2, 15);
recover = clamp_val(t.recover, 2, 16);
recover &= 0x15;
inb(0x3E6);
@ -462,9 +462,9 @@ static void opti82c611a_set_piomode(struct ata_port *ap,
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
active = FIT(t.active, 2, 17) - 2;
recover = FIT(t.recover, 1, 16) - 1;
setup = FIT(t.setup, 1, 4) - 1;
active = clamp_val(t.active, 2, 17) - 2;
recover = clamp_val(t.recover, 1, 16) - 1;
setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@ -541,9 +541,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
active = FIT(t.active, 2, 17) - 2;
recover = FIT(t.recover, 1, 16) - 1;
setup = FIT(t.setup, 1, 4) - 1;
active = clamp_val(t.active, 2, 17) - 2;
recover = clamp_val(t.recover, 1, 16) - 1;
setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@ -624,11 +624,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
active = 8 - clamp_val(t.active, 1, 8);
recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
active = 9 - clamp_val(t.active, 2, 9);
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@ -658,11 +658,11 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
active = 8 - clamp_val(t.active, 1, 8);
recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
active = 9 - clamp_val(t.active, 2, 9);
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@ -695,11 +695,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
active = 8 - clamp_val(t.active, 1, 8);
recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
active = 9 - clamp_val(t.active, 2, 9);
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
@ -830,8 +830,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
active = (FIT(t.active, 3, 17) - 1) & 0x0F;
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(ld_winbond->timing, timing, reg);
@ -842,7 +842,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
reg |= (FIT(t.setup, 0, 3) << 6);
reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}

6
drivers/ata/pata_ns87410.c
Просмотреть файл

@ -91,9 +91,9 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
return;
}
at.active = FIT(at.active, 2, 16) - 2;
at.setup = FIT(at.setup, 1, 4) - 1;
at.recover = FIT(at.recover, 1, 12) - 1;
at.active = clamp_val(at.active, 2, 16) - 2;
at.setup = clamp_val(at.setup, 1, 4) - 1;
at.recover = clamp_val(at.recover, 1, 12) - 1;
idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];

4
drivers/ata/pata_ns87415.c
Просмотреть файл

@ -66,8 +66,8 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
clocking = 17 - FIT(t.active, 2, 17);
clocking |= (16 - FIT(t.recover, 1, 16)) << 4;
clocking = 17 - clamp_val(t.active, 2, 17);
clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
/* Use the same timing for read and write bytes */
clocking |= (clocking << 8);
pci_write_config_word(dev, timing, clocking);

16
drivers/ata/pata_qdi.c
Просмотреть файл

@ -60,11 +60,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
active = 8 - clamp_val(t.active, 1, 8);
recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
active = 9 - clamp_val(t.active, 2, 9);
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@ -84,11 +84,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
active = 8 - FIT(t.active, 1, 8);
recovery = 18 - FIT(t.recover, 3, 18);
active = 8 - clamp_val(t.active, 1, 8);
recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
active = 9 - FIT(t.active, 2, 9);
recovery = 15 - FIT(t.recover, 0, 15);
active = 9 - clamp_val(t.active, 2, 9);
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;

14
drivers/ata/pata_via.c
Просмотреть файл

@ -259,15 +259,15 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
pci_write_config_byte(pdev, 0x4C, setup);
}
/* Load the PIO mode bits */
pci_write_config_byte(pdev, 0x4F - ap->port_no,
((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
switch(udma_type) {
@ -275,16 +275,16 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo
/* BUG() ? */
/* fall through */
case 33:
ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
break;
case 66:
ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
break;
case 100:
ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
case 133:
ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
}

6
drivers/ata/pata_winbond.c
Просмотреть файл

@ -75,8 +75,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
active = (FIT(t.active, 3, 17) - 1) & 0x0F;
recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(winbond->config, timing, reg);
@ -87,7 +87,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
reg |= (FIT(t.setup, 0, 3) << 6);
reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(winbond->config, timing + 1, reg);
}

2
include/linux/libata.h
Просмотреть файл

@ -821,8 +821,6 @@ struct ata_timing {
unsigned short udma; /* t2CYCTYP/2 */
};
#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
/*
* Core layer - drivers/ata/libata-core.c
*/