microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
  ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets
  mlx4: decreasing ref count when removing mac
  net: Fix security_socket_sendmsg() bypass problem.
  net: Cap number of elements for sendmmsg
  net: sendmmsg should only return an error if no messages were sent
  ixgbe: fix PHY link setup for 82599
  ixgbe: fix __ixgbe_notify_dca() bail out code
  igb: fix WOL on second port of i350 device
  e1000e: minor re-order of #include files
  e1000e: remove unnecessary check for NULL pointer
  intel drivers: repair missing flush operations
  macb: restore wrap bit when performing underrun cleanup
  cdc_ncm: fix endianness problem.
  irda: use PCI_VENDOR_ID_*
  mlx4: Fixing Ethernet unicast packet steering
  net: fix NULL dereferences in check_peer_redir()
  bnx2x: Clear MDIO access warning during first driver load
  bnx2x: Fix BCM578xx MAC test
  bnx2x: Fix BCM54618se invalid link indication
  bnx2x: Fix BCM84833 link
  ...
This commit is contained in:
Linus Torvalds 2011-08-05 06:42:01 -10:00
Родитель 5fdb32472e c15fea2d8c
Коммит 07d952dc66
102 изменённых файлов: 615 добавлений и 350 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/networking/bonding.txt
Просмотреть файл

@ -599,7 +599,7 @@ num_unsol_na
affect only the active-backup mode. These options were added for
bonding versions 3.3.0 and 3.4.0 respectively.
From Linux 2.6.40 and bonding version 3.7.1, these notifications
From Linux 3.0 and bonding version 3.7.1, these notifications
are generated by the ipv4 and ipv6 code and the numbers of
repetitions cannot be set independently.

10
MAINTAINERS
Просмотреть файл

@ -2643,9 +2643,8 @@ S: Maintained
F: arch/x86/math-emu/
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
M: Mike McLagan <mike.mclagan@linux.org>
L: netdev@vger.kernel.org
S: Maintained
S: Orphan
F: drivers/net/wan/dlci.c
F: drivers/net/wan/sdla.c
@ -4415,10 +4414,10 @@ F: net/*/netfilter/
F: net/netfilter/
NETLABEL
M: Paul Moore <paul.moore@hp.com>
M: Paul Moore <paul@paul-moore.com>
W: http://netlabel.sf.net
L: netdev@vger.kernel.org
S: Supported
S: Maintained
F: Documentation/netlabel/
F: include/net/netlabel.h
F: net/netlabel/
@ -4463,7 +4462,6 @@ F: include/linux/netdevice.h
NETWORKING [IPv4/IPv6]
M: "David S. Miller" <davem@davemloft.net>
M: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
M: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
M: James Morris <jmorris@namei.org>
M: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
M: Patrick McHardy <kaber@trash.net>
@ -4476,7 +4474,7 @@ F: include/net/ip*
F: arch/x86/net/*
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
M: Paul Moore <paul.moore@hp.com>
M: Paul Moore <paul@paul-moore.com>
L: netdev@vger.kernel.org
S: Maintained

8
drivers/connector/cn_proc.c
Просмотреть файл

@ -57,6 +57,7 @@ void proc_fork_connector(struct task_struct *task)
struct proc_event *ev;
__u8 buffer[CN_PROC_MSG_SIZE];
struct timespec ts;
struct task_struct *parent;
if (atomic_read(&proc_event_num_listeners) < 1)
return;
@ -67,8 +68,11 @@ void proc_fork_connector(struct task_struct *task)
ktime_get_ts(&ts); /* get high res monotonic timestamp */
put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns);
ev->what = PROC_EVENT_FORK;
ev->event_data.fork.parent_pid = task->real_parent->pid;
ev->event_data.fork.parent_tgid = task->real_parent->tgid;
rcu_read_lock();
parent = rcu_dereference(task->real_parent);
ev->event_data.fork.parent_pid = parent->pid;
ev->event_data.fork.parent_tgid = parent->tgid;
rcu_read_unlock();
ev->event_data.fork.child_pid = task->pid;
ev->event_data.fork.child_tgid = task->tgid;

10
drivers/net/bnx2x/bnx2x_cmn.c
Просмотреть файл

@ -1989,14 +1989,20 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
return -EINVAL;
}
/*
* It's important to set the bp->state to the value different from
* BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int()
* may restart the Tx from the NAPI context (see bnx2x_tx_int()).
*/
bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
smp_mb();
/* Stop Tx */
bnx2x_tx_disable(bp);
#ifdef BCM_CNIC
bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
#endif
bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
smp_mb();
bp->rx_mode = BNX2X_RX_MODE_NONE;

2
drivers/net/bnx2x/bnx2x_hsi.h
Просмотреть файл

@ -1204,6 +1204,8 @@ struct drv_port_mb {
#define LINK_STATUS_PFC_ENABLED 0x20000000
#define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000
u32 port_stx;
u32 stat_nig_timer;

218
drivers/net/bnx2x/bnx2x_link.c
Просмотреть файл

@ -1546,6 +1546,12 @@ static void bnx2x_umac_enable(struct link_params *params,
vars->line_speed);
break;
}
if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE;
if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE;
REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
udelay(50);
@ -1661,10 +1667,20 @@ static void bnx2x_xmac_disable(struct link_params *params)
{
u8 port = params->port;
struct bnx2x *bp = params->bp;
u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
if (REG_RD(bp, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC) {
/*
* Send an indication to change the state in the NIG back to XON
* Clearing this bit enables the next set of this bit to get
* rising edge
*/
pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI);
REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
(pfc_ctrl & ~(1<<1)));
REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI,
(pfc_ctrl | (1<<1)));
DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);
REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0);
usleep_range(1000, 1000);
@ -1729,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params,
DP(NETIF_MSG_LINK, "enabling EMAC\n");
/* Disable BMAC */
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
/* enable emac and not bmac */
REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
@ -2583,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params,
REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
wb_data, 2);
if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS,
wb_data, 2);
if (wb_data[0] > 0)
return -ESRCH;
}
return 0;
}
@ -2654,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params,
udelay(30);
bnx2x_update_pfc_bmac2(params, vars, is_lb);
if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT,
wb_data, 2);
if (wb_data[0] > 0) {
DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n",
wb_data[0]);
return -ESRCH;
}
}
return 0;
}
@ -2949,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 val;
u16 i;
int rc = 0;
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
/* address */
val = ((phy->addr << 21) | (devad << 16) | reg |
EMAC_MDIO_COMM_COMMAND_ADDRESS |
@ -3003,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy,
}
}
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
return rc;
}
@ -3012,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
u32 tmp;
u8 i;
int rc = 0;
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
/* address */
@ -3065,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val);
}
}
if (phy->flags & FLAGS_MDC_MDIO_WA_B0)
bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS,
EMAC_MDIO_STATUS_10MB);
return rc;
}
@ -4353,6 +4367,9 @@ void bnx2x_link_status_update(struct link_params *params,
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
vars->phy_flags = PHY_XGXS_FLAG;
if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
if (vars->link_up) {
DP(NETIF_MSG_LINK, "phy link up\n");
@ -4444,6 +4461,8 @@ void bnx2x_link_status_update(struct link_params *params,
/* indicate no mac active */
vars->mac_type = MAC_TYPE_NONE;
if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
}
/* Sync media type */
@ -5903,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params,
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
return rc;
/*
* return here without enabling traffic
* LED blink andsetting rate in ON mode.
* In oper mode, enabling LED blink
* and setting rate is needed.
*/
if (mode == LED_MODE_ON)
return rc;
}
} else if (SINGLE_MEDIA_DIRECT(params) &&
(CHIP_IS_E1x(bp) ||
CHIP_IS_E2(bp))) {
} else if (SINGLE_MEDIA_DIRECT(params)) {
/*
* This is a work-around for HW issue found when link
* is up in CL73
*/
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
} else {
if (CHIP_IS_E1x(bp) ||
CHIP_IS_E2(bp) ||
(mode == LED_MODE_ON))
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
hw_led_mode);
} else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
}
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */
@ -6160,6 +6189,7 @@ static int bnx2x_update_link_down(struct link_params *params,
/* update shared memory */
vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
LINK_STATUS_LINK_UP |
LINK_STATUS_PHYSICAL_LINK_FLAG |
LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
@ -6197,7 +6227,8 @@ static int bnx2x_update_link_up(struct link_params *params,
u8 port = params->port;
int rc = 0;
vars->link_status |= LINK_STATUS_LINK_UP;
vars->link_status |= (LINK_STATUS_LINK_UP |
LINK_STATUS_PHYSICAL_LINK_FLAG);
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
@ -7998,6 +8029,9 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params,
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val);
/* Restart microcode to re-read the new mode */
bnx2x_warpcore_reset_lane(bp, phy, 1);
bnx2x_warpcore_reset_lane(bp, phy, 0);
}
@ -8116,7 +8150,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
offsetof(struct shmem_region, dev_info.
port_feature_config[params->port].
config));
bnx2x_set_gpio_int(bp, gpio_num,
MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
gpio_port);
@ -8125,8 +8158,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
* Disable transmit for this module
*/
phy->media_type = ETH_PHY_NOT_PRESENT;
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) ||
CHIP_IS_E3(bp))
bnx2x_sfp_set_transmitter(params, phy, 0);
}
}
@ -8228,9 +8262,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
u16 cnt, val, tmp1;
struct bnx2x *bp = params->bp;
/* SPF+ PHY: Set flag to check for Tx error */
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
/* HW reset */
@ -8414,9 +8445,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
/* SPF+ PHY: Set flag to check for Tx error */
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
bnx2x_wait_reset_complete(bp, phy, params);
@ -8585,9 +8613,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
/* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
/* SPF+ PHY: Set flag to check for Tx error */
vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
bnx2x_wait_reset_complete(bp, phy, params);
rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
/* Should be 0x6 to enable XS on Tx side. */
@ -9243,7 +9268,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
if (phy->req_duplex == DUPLEX_FULL)
autoneg_val |= (1<<8);
bnx2x_cl45_write(bp, phy,
/*
* Always write this if this is not 84833.
* For 84833, write it only when it's a forced speed.
*/
if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
((autoneg_val & (1<<12)) == 0))
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val);
@ -9257,13 +9288,12 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CTRL,
0x3200);
} else if (phy->req_line_speed != SPEED_10 &&
phy->req_line_speed != SPEED_100) {
} else
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
MDIO_AN_REG_8481_10GBASE_T_AN_CTRL,
1);
}
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, params);
@ -9756,11 +9786,9 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_CTL_DEVAD,
0x400f, &val16);
/* Put to low power mode on newer FW */
if ((val16 & 0x303f) > 0x1009)
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, 0x800);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, 0x800);
}
}
@ -10191,8 +10219,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
u32 cfg_pin;
u8 port;
/* This works with E3 only, no need to check the chip
before determining the port. */
/*
* In case of no EPIO routed to reset the GPHY, put it
* in low power mode.
*/
bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800);
/*
* This works with E3 only, no need to check the chip
* before determining the port.
*/
port = params->port;
cfg_pin = (REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
@ -10603,7 +10638,8 @@ static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
.addr = 0xff,
.def_md_devad = 0,
.flags = FLAGS_HW_LOCK_REQUIRED,
.flags = (FLAGS_HW_LOCK_REQUIRED |
FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@ -10729,7 +10765,8 @@ static struct bnx2x_phy phy_8706 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
.addr = 0xff,
.def_md_devad = 0,
.flags = FLAGS_INIT_XGXS_FIRST,
.flags = (FLAGS_INIT_XGXS_FIRST |
FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@ -10760,7 +10797,8 @@ static struct bnx2x_phy phy_8726 = {
.addr = 0xff,
.def_md_devad = 0,
.flags = (FLAGS_HW_LOCK_REQUIRED |
FLAGS_INIT_XGXS_FIRST),
FLAGS_INIT_XGXS_FIRST |
FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@ -10791,7 +10829,8 @@ static struct bnx2x_phy phy_8727 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
.addr = 0xff,
.def_md_devad = 0,
.flags = FLAGS_FAN_FAILURE_DET_REQ,
.flags = (FLAGS_FAN_FAILURE_DET_REQ |
FLAGS_TX_ERROR_CHECK),
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
@ -11112,6 +11151,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
*/
if (CHIP_REV(bp) == CHIP_REV_Ax)
phy->flags |= FLAGS_MDC_MDIO_WA;
else
phy->flags |= FLAGS_MDC_MDIO_WA_B0;
} else {
switch (switch_cfg) {
case SWITCH_CFG_1G:
@ -11500,13 +11541,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params,
* Set WC to loopback mode since link is required to provide clock
* to the XMAC in 20G mode
*/
if (vars->line_speed == SPEED_20000) {
bnx2x_set_aer_mmd(params, &params->phy[0]);
bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
params->phy[INT_PHY].config_loopback(
bnx2x_set_aer_mmd(params, &params->phy[0]);
bnx2x_warpcore_reset_lane(bp, &params->phy[0], 0);
params->phy[INT_PHY].config_loopback(
&params->phy[INT_PHY],
params);
}
bnx2x_xmac_enable(params, vars, 1);
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
}
@ -11684,12 +11724,16 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
bnx2x_set_led(params, vars, LED_MODE_OFF, 0);
if (reset_ext_phy) {
bnx2x_set_mdio_clk(bp, params->chip_id, port);
for (phy_index = EXT_PHY1; phy_index < params->num_phys;
phy_index++) {
if (params->phy[phy_index].link_reset)
if (params->phy[phy_index].link_reset) {
bnx2x_set_aer_mmd(params,
&params->phy[phy_index]);
params->phy[phy_index].link_reset(
&params->phy[phy_index],
params);
}
if (params->phy[phy_index].flags &
FLAGS_REARM_LATCH_SIGNAL)
clear_latch_ind = 1;
@ -12178,10 +12222,6 @@ static void bnx2x_analyze_link_error(struct link_params *params,
u8 led_mode;
u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
/*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n",
vars->link_up,
half_open_conn, lss_status);*/
if ((lss_status ^ half_open_conn) == 0)
return;
@ -12194,6 +12234,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
* b. Update link_vars->link_up
*/
if (lss_status) {
DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
vars->link_status &= ~LINK_STATUS_LINK_UP;
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
@ -12203,6 +12244,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
*/
led_mode = LED_MODE_OFF;
} else {
DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
vars->link_status |= LINK_STATUS_LINK_UP;
vars->link_up = 1;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
@ -12219,6 +12261,15 @@ static void bnx2x_analyze_link_error(struct link_params *params,
bnx2x_notify_link_changed(bp);
}
/******************************************************************************
* Description:
* This function checks for half opened connection change indication.
* When such change occurs, it calls the bnx2x_analyze_link_error
* to check if Remote Fault is set or cleared. Reception of remote fault
* status message in the MAC indicates that the peer's MAC has detected
* a fault, for example, due to break in the TX side of fiber.
*
******************************************************************************/
static void bnx2x_check_half_open_conn(struct link_params *params,
struct link_vars *vars)
{
@ -12229,9 +12280,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
return;
if (!CHIP_IS_E3(bp) &&
if (CHIP_IS_E3(bp) &&
(REG_RD(bp, MISC_REG_RESET_REG_2) &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) {
(MISC_REGISTERS_RESET_REG_2_XMAC))) {
/* Check E3 XMAC */
/*
* Note that link speed cannot be queried here, since it may be
* zero while link is down. In case UMAC is active, LSS will
* simply not be set
*/
mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
/* Clear stick bits (Requires rising edge) */
REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
lss_status = 1;
bnx2x_analyze_link_error(params, vars, lss_status);
} else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
/* Check E1X / E2 BMAC */
u32 lss_status_reg;
u32 wb_data[2];
@ -12253,14 +12323,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u16 phy_idx;
if (!params) {
DP(NETIF_MSG_LINK, "Ininitliazed params !\n");
DP(NETIF_MSG_LINK, "Uninitialized params !\n");
return;
}
/* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x
RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed,
REG_RD(bp, MISC_REG_RESET_REG_2)); */
bnx2x_check_half_open_conn(params, vars);
for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
bnx2x_set_aer_mmd(params, &params->phy[phy_idx]);
bnx2x_check_half_open_conn(params, vars);
break;
}
}
if (CHIP_IS_E3(bp))
bnx2x_check_over_curr(params, vars);
}

3
drivers/net/bnx2x/bnx2x_link.h
Просмотреть файл

@ -145,6 +145,8 @@ struct bnx2x_phy {
#define FLAGS_SFP_NOT_APPROVED (1<<7)
#define FLAGS_MDC_MDIO_WA (1<<8)
#define FLAGS_DUMMY_READ (1<<9)
#define FLAGS_MDC_MDIO_WA_B0 (1<<10)
#define FLAGS_TX_ERROR_CHECK (1<<12)
/* preemphasis values for the rx side */
u16 rx_preemphasis[4];
@ -276,7 +278,6 @@ struct link_vars {
#define PHY_PHYSICAL_LINK_FLAG (1<<2)
#define PHY_HALF_OPEN_CONN_FLAG (1<<3)
#define PHY_OVER_CURRENT_FLAG (1<<4)
#define PHY_TX_ERROR_CHECK_FLAG (1<<5)
u8 mac_type;
#define MAC_TYPE_NONE 0

6
drivers/net/bnx2x/bnx2x_reg.h
Просмотреть файл

@ -4771,9 +4771,11 @@
The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
header pointer. */
#define UCM_REG_XX_TABLE 0xe0300
#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28)
#define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15)
#define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24)
#define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5)
#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8)
#define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4)
#define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1)
#define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13)
@ -5622,8 +5624,9 @@
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16)
#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
#define EMAC_MDIO_STATUS_10MB (1L<<1)
#define EMAC_MODE_25G_MODE (1L<<5)
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
#define EMAC_MODE_PORT_GMII (2L<<2)
@ -5634,6 +5637,7 @@
#define EMAC_REG_EMAC_MAC_MATCH 0x10
#define EMAC_REG_EMAC_MDIO_COMM 0xac
#define EMAC_REG_EMAC_MDIO_MODE 0xb4
#define EMAC_REG_EMAC_MDIO_STATUS 0xb0
#define EMAC_REG_EMAC_MODE 0x0
#define EMAC_REG_EMAC_RX_MODE 0xc8
#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c

6
drivers/net/e1000/e1000_ethtool.c
Просмотреть файл

@ -838,6 +838,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
E1000_WRITE_FLUSH();
msleep(10);
/* Test each interrupt */
@ -856,6 +857,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, mask);
ew32(ICS, mask);
E1000_WRITE_FLUSH();
msleep(10);
if (adapter->test_icr & mask) {
@ -873,6 +875,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMS, mask);
ew32(ICS, mask);
E1000_WRITE_FLUSH();
msleep(10);
if (!(adapter->test_icr & mask)) {
@ -890,6 +893,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, ~mask & 0x00007FFF);
ew32(ICS, ~mask & 0x00007FFF);
E1000_WRITE_FLUSH();
msleep(10);
if (adapter->test_icr) {
@ -901,6 +905,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
E1000_WRITE_FLUSH();
msleep(10);
/* Unhook test interrupt handler */
@ -1394,6 +1399,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
if (unlikely(++k == txdr->count)) k = 0;
}
ew32(TDT, k);
E1000_WRITE_FLUSH();
msleep(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;

3
drivers/net/e1000/e1000_hw.c
Просмотреть файл

@ -446,6 +446,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw)
/* Must reset the PHY before resetting the MAC */
if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
E1000_WRITE_FLUSH();
msleep(5);
}
@ -3752,6 +3753,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
/* Clear SK and CS */
eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
ew32(EECD, eecd);
E1000_WRITE_FLUSH();
udelay(1);
}
@ -3824,6 +3826,7 @@ static void e1000_release_eeprom(struct e1000_hw *hw)
eecd &= ~E1000_EECD_SK; /* Lower SCK */
ew32(EECD, eecd);
E1000_WRITE_FLUSH();
udelay(hw->eeprom.delay_usec);
} else if (hw->eeprom.type == e1000_eeprom_microwire) {

2
drivers/net/e1000e/es2lan.c
Просмотреть файл

@ -1313,6 +1313,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
udelay(2);
@ -1347,6 +1348,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
udelay(2);

11
drivers/net/e1000e/ethtool.c
Просмотреть файл

@ -28,8 +28,8 @@
/* ethtool support for e1000 */
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
#include <linux/ethtool.h>
#include <linux/pci.h>
#include <linux/slab.h>
@ -964,6 +964,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
e1e_flush();
usleep_range(10000, 20000);
/* Test each interrupt */
@ -996,6 +997,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, mask);
ew32(ICS, mask);
e1e_flush();
usleep_range(10000, 20000);
if (adapter->test_icr & mask) {
@ -1014,6 +1016,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMS, mask);
ew32(ICS, mask);
e1e_flush();
usleep_range(10000, 20000);
if (!(adapter->test_icr & mask)) {
@ -1032,6 +1035,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
adapter->test_icr = 0;
ew32(IMC, ~mask & 0x00007FFF);
ew32(ICS, ~mask & 0x00007FFF);
e1e_flush();
usleep_range(10000, 20000);
if (adapter->test_icr) {
@ -1043,6 +1047,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
/* Disable all the interrupts */
ew32(IMC, 0xFFFFFFFF);
e1e_flush();
usleep_range(10000, 20000);
/* Unhook test interrupt handler */
@ -1276,6 +1281,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
E1000_CTRL_FD); /* Force Duplex to FULL */
ew32(CTRL, ctrl_reg);
e1e_flush();
udelay(500);
return 0;
@ -1418,6 +1424,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
*/
#define E1000_SERDES_LB_ON 0x410
ew32(SCTL, E1000_SERDES_LB_ON);
e1e_flush();
usleep_range(10000, 20000);
return 0;
@ -1513,6 +1520,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
hw->phy.media_type == e1000_media_type_internal_serdes) {
#define E1000_SERDES_LB_OFF 0x400
ew32(SCTL, E1000_SERDES_LB_OFF);
e1e_flush();
usleep_range(10000, 20000);
break;
}
@ -1592,6 +1600,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
k = 0;
}
ew32(TDT, k);
e1e_flush();
msleep(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;

7
drivers/net/e1000e/ich8lan.c
Просмотреть файл

@ -283,6 +283,7 @@ static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
ew32(CTRL, ctrl);
e1e_flush();
udelay(10);
ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
ew32(CTRL, ctrl);
@ -1230,9 +1231,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
ew32(CTRL, reg);
ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
e1e_flush();
udelay(20);
ew32(CTRL, ctrl_reg);
ew32(CTRL_EXT, ctrl_ext);
e1e_flush();
udelay(20);
out:
@ -2134,8 +2137,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
ret_val = 0;
for (i = 0; i < words; i++) {
if ((dev_spec->shadow_ram) &&
(dev_spec->shadow_ram[offset+i].modified)) {
if (dev_spec->shadow_ram[offset+i].modified) {
data[i] = dev_spec->shadow_ram[offset+i].value;
} else {
ret_val = e1000_read_flash_word_ich8lan(hw,
@ -3090,6 +3092,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
ret_val = e1000_acquire_swflag_ich8lan(hw);
e_dbg("Issuing a global reset to ich8lan\n");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
/* cannot issue a flush here because it hangs the hardware */
msleep(20);
if (!ret_val)

1
drivers/net/e1000e/lib.c
Просмотреть файл

@ -1986,6 +1986,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
/* Clear SK and CS */
eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
ew32(EECD, eecd);
e1e_flush();
udelay(1);
/*

2
drivers/net/e1000e/netdev.c
Просмотреть файл

@ -31,12 +31,12 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/interrupt.h>
#include <linux/tcp.h>
#include <linux/ipv6.h>
#include <linux/slab.h>

2
drivers/net/e1000e/phy.c
Просмотреть файл

@ -537,6 +537,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
udelay(2);
@ -609,6 +610,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
e1e_flush();
udelay(2);

1
drivers/net/igb/e1000_nvm.c
Просмотреть файл

@ -285,6 +285,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
/* Clear SK and CS */
eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
wr32(E1000_EECD, eecd);
wrfl();
udelay(1);
timeout = NVM_MAX_RETRY_SPI;

5
drivers/net/igb/igb_ethtool.c
Просмотреть файл

@ -1225,6 +1225,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
/* Disable all the interrupts */
wr32(E1000_IMC, ~0);
wrfl();
msleep(10);
/* Define all writable bits for ICS */
@ -1268,6 +1269,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
wr32(E1000_IMC, mask);
wr32(E1000_ICS, mask);
wrfl();
msleep(10);
if (adapter->test_icr & mask) {
@ -1289,6 +1291,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
wr32(E1000_IMS, mask);
wr32(E1000_ICS, mask);
wrfl();
msleep(10);
if (!(adapter->test_icr & mask)) {
@ -1310,6 +1313,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
wr32(E1000_IMC, ~mask);
wr32(E1000_ICS, ~mask);
wrfl();
msleep(10);
if (adapter->test_icr & mask) {
@ -1321,6 +1325,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
/* Disable all the interrupts */
wr32(E1000_IMC, ~0);
wrfl();
msleep(10);
/* Unhook test interrupt handler */

4
drivers/net/igb/igb_main.c
Просмотреть файл

@ -1052,6 +1052,7 @@ msi_only:
kfree(adapter->vf_data);
adapter->vf_data = NULL;
wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
wrfl();
msleep(100);
dev_info(&adapter->pdev->dev, "IOV Disabled\n");
}
@ -2022,7 +2023,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
if (hw->bus.func == 0)
hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
else if (hw->mac.type == e1000_82580)
else if (hw->mac.type >= e1000_82580)
hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
&eeprom_data);
@ -2198,6 +2199,7 @@ static void __devexit igb_remove(struct pci_dev *pdev)
kfree(adapter->vf_data);
adapter->vf_data = NULL;
wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
wrfl();
msleep(100);
dev_info(&pdev->dev, "IOV Disabled\n");
}

2
drivers/net/igbvf/netdev.c
Просмотреть файл

@ -1226,6 +1226,7 @@ static void igbvf_configure_tx(struct igbvf_adapter *adapter)
/* disable transmits */
txdctl = er32(TXDCTL(0));
ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
e1e_flush();
msleep(10);
/* Setup the HW Tx Head and Tail descriptor pointers */
@ -1306,6 +1307,7 @@ static void igbvf_configure_rx(struct igbvf_adapter *adapter)
/* disable receives */
rxdctl = er32(RXDCTL(0));
ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
e1e_flush();
msleep(10);
rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);

18
drivers/net/irda/smsc-ircc2.c
Просмотреть файл

@ -2405,8 +2405,6 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
* addresses making a subsystem device table necessary.
*/
#ifdef CONFIG_PCI
#define PCIID_VENDOR_INTEL 0x8086
#define PCIID_VENDOR_ALI 0x10b9
static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = {
/*
* Subsystems needing entries:
@ -2416,7 +2414,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
*/
{
/* Guessed entry */
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x08bc,
@ -2429,7 +2427,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nx5000 family",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x088c,
@ -2443,7 +2441,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nc8000 family",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x103c,
.subdevice = 0x0890,
@ -2456,7 +2454,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "HP nc6000 family",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */
.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */
.device = 0x24cc,
.subvendor = 0x0e11,
.subdevice = 0x0860,
@ -2471,7 +2469,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
.vendor = PCIID_VENDOR_INTEL,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24c0,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@ -2484,7 +2482,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
},
{
.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
.vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */
.device = 0x248c,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@ -2498,7 +2496,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* 82801DBM (ICH4-M) LPC Interface Bridge */
.vendor = PCIID_VENDOR_INTEL,
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x24cc,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */
@ -2512,7 +2510,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini
},
{
/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
.vendor = PCIID_VENDOR_ALI,
.vendor = PCI_VENDOR_ID_AL,
.device = 0x1533,
.subvendor = 0x1179,
.subdevice = 0xffff, /* 0xffff is "any" */

9
drivers/net/ixgb/ixgb_ee.c
Просмотреть файл

@ -57,6 +57,7 @@ ixgb_raise_clock(struct ixgb_hw *hw,
*/
*eecd_reg = *eecd_reg | IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, *eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
}
@ -75,6 +76,7 @@ ixgb_lower_clock(struct ixgb_hw *hw,
*/
*eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, *eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
}
@ -112,6 +114,7 @@ ixgb_shift_out_bits(struct ixgb_hw *hw,
eecd_reg |= IXGB_EECD_DI;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
@ -206,21 +209,25 @@ ixgb_standby_eeprom(struct ixgb_hw *hw)
/* Deselect EEPROM */
eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
/* Clock high */
eecd_reg |= IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
/* Select EEPROM */
eecd_reg |= IXGB_EECD_CS;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
/* Clock low */
eecd_reg &= ~IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
}
@ -239,11 +246,13 @@ ixgb_clock_eeprom(struct ixgb_hw *hw)
/* Rising edge of clock */
eecd_reg |= IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
/* Falling edge of clock */
eecd_reg &= ~IXGB_EECD_SK;
IXGB_WRITE_REG(hw, EECD, eecd_reg);
IXGB_WRITE_FLUSH(hw);
udelay(50);
}

2
drivers/net/ixgb/ixgb_hw.c
Просмотреть файл

@ -149,6 +149,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw)
*/
IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
IXGB_WRITE_FLUSH(hw);
msleep(IXGB_DELAY_BEFORE_RESET);
/* Issue a global reset to the MAC. This will reset the chip's
@ -1220,6 +1221,7 @@ ixgb_optics_reset_bcm(struct ixgb_hw *hw)
ctrl &= ~IXGB_CTRL0_SDP2;
ctrl |= IXGB_CTRL0_SDP3;
IXGB_WRITE_REG(hw, CTRL0, ctrl);
IXGB_WRITE_FLUSH(hw);
/* SerDes needs extra delay */
msleep(IXGB_SUN_PHY_RESET_DELAY);

1
drivers/net/ixgbe/ixgbe_82599.c
Просмотреть файл

@ -213,6 +213,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
switch (hw->phy.type) {
case ixgbe_phy_tn:
phy->ops.check_link = &ixgbe_check_phy_link_tnx;
phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
phy->ops.get_firmware_version =
&ixgbe_get_phy_firmware_version_tnx;
break;

1
drivers/net/ixgbe/ixgbe_common.c
Просмотреть файл

@ -2632,6 +2632,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
autoc_reg |= IXGBE_AUTOC_AN_RESTART;
autoc_reg |= IXGBE_AUTOC_FLU;
IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
IXGBE_WRITE_FLUSH(hw);
usleep_range(10000, 20000);
}

5
drivers/net/ixgbe/ixgbe_ethtool.c
Просмотреть файл

@ -1378,6 +1378,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
IXGBE_WRITE_FLUSH(&adapter->hw);
usleep_range(10000, 20000);
/* Test each interrupt */
@ -1398,6 +1399,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
~mask & 0x00007FFF);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
~mask & 0x00007FFF);
IXGBE_WRITE_FLUSH(&adapter->hw);
usleep_range(10000, 20000);
if (adapter->test_icr & mask) {
@ -1415,6 +1417,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
adapter->test_icr = 0;
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
IXGBE_WRITE_FLUSH(&adapter->hw);
usleep_range(10000, 20000);
if (!(adapter->test_icr &mask)) {
@ -1435,6 +1438,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
~mask & 0x00007FFF);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
~mask & 0x00007FFF);
IXGBE_WRITE_FLUSH(&adapter->hw);
usleep_range(10000, 20000);
if (adapter->test_icr) {
@ -1446,6 +1450,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
/* Disable all the interrupts */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
IXGBE_WRITE_FLUSH(&adapter->hw);
usleep_range(10000, 20000);
/* Unhook test interrupt handler */

3
drivers/net/ixgbe/ixgbe_main.c
Просмотреть файл

@ -184,6 +184,7 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
IXGBE_WRITE_FLUSH(hw);
/* take a breather then clean up driver data */
msleep(100);
@ -1005,7 +1006,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data)
struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
unsigned long event = *(unsigned long *)data;
if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE))
return 0;
switch (event) {

3
drivers/net/ixgbe/ixgbe_phy.c
Просмотреть файл

@ -1585,6 +1585,7 @@ static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
*i2cctl |= IXGBE_I2C_CLK_OUT;
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* SCL rise time (1000ns) */
udelay(IXGBE_I2C_T_RISE);
@ -1605,6 +1606,7 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
*i2cctl &= ~IXGBE_I2C_CLK_OUT;
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* SCL fall time (300ns) */
udelay(IXGBE_I2C_T_FALL);
@ -1628,6 +1630,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
*i2cctl &= ~IXGBE_I2C_DATA_OUT;
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);

1
drivers/net/ixgbe/ixgbe_x540.c
Просмотреть файл

@ -162,6 +162,7 @@ mac_reset_top:
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
IXGBE_WRITE_FLUSH(hw);
msleep(50);

3
drivers/net/macb.c
Просмотреть файл

@ -322,6 +322,9 @@ static void macb_tx(struct macb *bp)
for (i = 0; i < TX_RING_SIZE; i++)
bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
/* Add wrap bit */
bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP);
/* free transmit buffer in upper layer*/
for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) {
struct ring_info *rp = &bp->tx_skb[tail];

2
drivers/net/mlx4/en_port.c
Просмотреть файл

@ -128,7 +128,7 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn,
memset(context, 0, sizeof *context);
context->base_qpn = cpu_to_be32(base_qpn);
context->n_mac = 0x7;
context->n_mac = 0x2;
context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT |
base_qpn);
context->mcast = cpu_to_be32(m_promisc << SET_PORT_MC_PROMISC_SHIFT |

2
drivers/net/mlx4/main.c
Просмотреть файл

@ -1117,6 +1117,8 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
info->port = port;
mlx4_init_mac_table(dev, &info->mac_table);
mlx4_init_vlan_table(dev, &info->vlan_table);
info->base_qpn = dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] +
(port - 1) * (1 << log_num_mac);
sprintf(info->dev_name, "mlx4_port%d", port);
info->port_attr.attr.name = info->dev_name;

9
drivers/net/mlx4/port.c
Просмотреть файл

@ -258,9 +258,12 @@ void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int qpn)
if (validate_index(dev, table, index))
goto out;
table->entries[index] = 0;
mlx4_set_port_mac_table(dev, port, table->entries);
--table->total;
/* Check whether this address has reference count */
if (!(--table->refs[index])) {
table->entries[index] = 0;
mlx4_set_port_mac_table(dev, port, table->entries);
--table->total;
}
out:
mutex_unlock(&table->mutex);
}

4
drivers/net/niu.c
Просмотреть файл

@ -9201,7 +9201,7 @@ static int __devinit niu_ldg_init(struct niu *np)
first_chan = 0;
for (i = 0; i < port; i++)
first_chan += parent->rxchan_per_port[port];
first_chan += parent->rxchan_per_port[i];
num_chan = parent->rxchan_per_port[port];
for (i = first_chan; i < (first_chan + num_chan); i++) {
@ -9217,7 +9217,7 @@ static int __devinit niu_ldg_init(struct niu *np)
first_chan = 0;
for (i = 0; i < port; i++)
first_chan += parent->txchan_per_port[port];
first_chan += parent->txchan_per_port[i];
num_chan = parent->txchan_per_port[port];
for (i = first_chan; i < (first_chan + num_chan); i++) {
err = niu_ldg_assign_ldn(np, parent,

28
drivers/net/r8169.c
Просмотреть файл

@ -239,6 +239,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 },
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4302), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 },
{ PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 },
{ PCI_VENDOR_ID_LINKSYS, 0x1032,
@ -1091,6 +1092,21 @@ rtl_w1w0_eri(void __iomem *ioaddr, int addr, u32 mask, u32 p, u32 m, int type)
rtl_eri_write(ioaddr, addr, mask, (val & ~m) | p, type);
}
struct exgmac_reg {
u16 addr;
u16 mask;
u32 val;
};
static void rtl_write_exgmac_batch(void __iomem *ioaddr,
const struct exgmac_reg *r, int len)
{
while (len-- > 0) {
rtl_eri_write(ioaddr, r->addr, r->mask, r->val, ERIAR_EXGMAC);
r++;
}
}
static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
{
u8 value = 0xff;
@ -3116,6 +3132,18 @@ static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
RTL_W32(MAC0, low);
RTL_R32(MAC0);
if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
const struct exgmac_reg e[] = {
{ .addr = 0xe0, ERIAR_MASK_1111, .val = low },
{ .addr = 0xe4, ERIAR_MASK_1111, .val = high },
{ .addr = 0xf0, ERIAR_MASK_1111, .val = low << 16 },
{ .addr = 0xf4, ERIAR_MASK_1111, .val = high << 16 |
low >> 16 },
};
rtl_write_exgmac_batch(ioaddr, e, ARRAY_SIZE(e));
}
RTL_W8(Cfg9346, Cfg9346_Lock);
spin_unlock_irq(&tp->lock);

12
drivers/net/sis190.c
Просмотреть файл

@ -1825,6 +1825,16 @@ static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
}
static int sis190_mac_addr(struct net_device *dev, void *p)
{
int rc;
rc = eth_mac_addr(dev, p);
if (!rc)
sis190_init_rxfilter(dev);
return rc;
}
static const struct net_device_ops sis190_netdev_ops = {
.ndo_open = sis190_open,
.ndo_stop = sis190_close,
@ -1833,7 +1843,7 @@ static const struct net_device_ops sis190_netdev_ops = {
.ndo_tx_timeout = sis190_tx_timeout,
.ndo_set_multicast_list = sis190_set_rx_mode,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_set_mac_address = sis190_mac_addr,
.ndo_validate_addr = eth_validate_addr,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = sis190_netpoll,

156
drivers/net/usb/cdc_ncm.c
Просмотреть файл

@ -53,7 +53,7 @@
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc.h>
#define DRIVER_VERSION "01-June-2011"
#define DRIVER_VERSION "04-Aug-2011"
/* CDC NCM subclass 3.2.1 */
#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10
@ -163,35 +163,8 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
}
static int
cdc_ncm_do_request(struct cdc_ncm_ctx *ctx, struct usb_cdc_notification *req,
void *data, u16 flags, u16 *actlen, u16 timeout)
{
int err;
err = usb_control_msg(ctx->udev, (req->bmRequestType & USB_DIR_IN) ?
usb_rcvctrlpipe(ctx->udev, 0) :
usb_sndctrlpipe(ctx->udev, 0),
req->bNotificationType, req->bmRequestType,
req->wValue,
req->wIndex, data,
req->wLength, timeout);
if (err < 0) {
if (actlen)
*actlen = 0;
return err;
}
if (actlen)
*actlen = err;
return 0;
}
static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
{
struct usb_cdc_notification req;
u32 val;
u8 flags;
u8 iface_no;
@ -200,14 +173,14 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_GET_NTB_PARAMETERS;
req.wValue = 0;
req.wIndex = cpu_to_le16(iface_no);
req.wLength = cpu_to_le16(sizeof(ctx->ncm_parm));
err = cdc_ncm_do_request(ctx, &req, &ctx->ncm_parm, 0, NULL, 1000);
if (err) {
err = usb_control_msg(ctx->udev,
usb_rcvctrlpipe(ctx->udev, 0),
USB_CDC_GET_NTB_PARAMETERS,
USB_TYPE_CLASS | USB_DIR_IN
| USB_RECIP_INTERFACE,
0, iface_no, &ctx->ncm_parm,
sizeof(ctx->ncm_parm), 10000);
if (err < 0) {
pr_debug("failed GET_NTB_PARAMETERS\n");
return 1;
}
@ -253,31 +226,26 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
/* inform device about NTB input size changes */
if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_SET_NTB_INPUT_SIZE;
req.wValue = 0;
req.wIndex = cpu_to_le16(iface_no);
if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
req.wLength = 8;
ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
ndp_in_sz.wNtbInMaxDatagrams =
cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX);
ndp_in_sz.wReserved = 0;
err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL,
1000);
err = usb_control_msg(ctx->udev,
usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_NTB_INPUT_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
0, iface_no, &ndp_in_sz, 8, 1000);
} else {
__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
req.wLength = 4;
err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0,
NULL, 1000);
err = usb_control_msg(ctx->udev,
usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_NTB_INPUT_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
0, iface_no, &dwNtbInMaxSize, 4, 1000);
}
if (err)
if (err < 0)
pr_debug("Setting NTB Input Size failed\n");
}
@ -332,29 +300,24 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
/* set CRC Mode */
if (flags & USB_CDC_NCM_NCAP_CRC_MODE) {
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_SET_CRC_MODE;
req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED);
req.wIndex = cpu_to_le16(iface_no);
req.wLength = 0;
err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
if (err)
err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_CRC_MODE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
USB_CDC_NCM_CRC_NOT_APPENDED,
iface_no, NULL, 0, 1000);
if (err < 0)
pr_debug("Setting CRC mode off failed\n");
}
/* set NTB format, if both formats are supported */
if (ntb_fmt_supported & USB_CDC_NCM_NTH32_SIGN) {
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_SET_NTB_FORMAT;
req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT);
req.wIndex = cpu_to_le16(iface_no);
req.wLength = 0;
err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
if (err)
err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_NTB_FORMAT, USB_TYPE_CLASS
| USB_DIR_OUT | USB_RECIP_INTERFACE,
USB_CDC_NCM_NTB16_FORMAT,
iface_no, NULL, 0, 1000);
if (err < 0)
pr_debug("Setting NTB format to 16-bit failed\n");
}
@ -364,17 +327,13 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
__le16 max_datagram_size;
u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
req.wValue = 0;
req.wIndex = cpu_to_le16(iface_no);
req.wLength = cpu_to_le16(2);
err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL,
1000);
if (err) {
err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0),
USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN
| USB_RECIP_INTERFACE,
0, iface_no, &max_datagram_size,
2, 1000);
if (err < 0) {
pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
CDC_NCM_MIN_DATAGRAM_SIZE);
} else {
@ -395,17 +354,15 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
CDC_NCM_MIN_DATAGRAM_SIZE;
/* if value changed, update device */
req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
USB_RECIP_INTERFACE;
req.bNotificationType = USB_CDC_SET_MAX_DATAGRAM_SIZE;
req.wValue = 0;
req.wIndex = cpu_to_le16(iface_no);
req.wLength = 2;
max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
err = cdc_ncm_do_request(ctx, &req, &max_datagram_size,
0, NULL, 1000);
if (err)
err = usb_control_msg(ctx->udev,
usb_sndctrlpipe(ctx->udev, 0),
USB_CDC_SET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT
| USB_RECIP_INTERFACE,
0,
iface_no, &max_datagram_size,
2, 1000);
if (err < 0)
pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
}
@ -671,7 +628,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
u32 rem;
u32 offset;
u32 last_offset;
u16 n = 0;
u16 n = 0, index;
u8 ready2send = 0;
/* if there is a remaining skb, it gets priority */
@ -859,8 +816,8 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
cpu_to_le16(sizeof(ctx->tx_ncm.nth16));
ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq);
ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset);
ctx->tx_ncm.nth16.wNdpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
ctx->tx_ndp_modulus);
index = ALIGN(sizeof(struct usb_cdc_ncm_nth16), ctx->tx_ndp_modulus);
ctx->tx_ncm.nth16.wNdpIndex = cpu_to_le16(index);
memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16));
ctx->tx_seq++;
@ -873,12 +830,11 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem);
ctx->tx_ncm.ndp16.wNextNdpIndex = 0; /* reserved */
memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex,
memcpy(((u8 *)skb_out->data) + index,
&(ctx->tx_ncm.ndp16),
sizeof(ctx->tx_ncm.ndp16));
memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex +
sizeof(ctx->tx_ncm.ndp16),
memcpy(((u8 *)skb_out->data) + index + sizeof(ctx->tx_ncm.ndp16),
&(ctx->tx_ncm.dpe16),
(ctx->tx_curr_frame_num + 1) *
sizeof(struct usb_cdc_ncm_dpe16));

6
drivers/net/wireless/ath/ath9k/ar9002_hw.c
Просмотреть файл

@ -309,11 +309,7 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
u8 i;
u32 val;
if (ah->is_pciexpress != true)
return;
/* Do not touch SerDes registers */
if (ah->config.pcie_powersave_enable == 2)
if (ah->is_pciexpress != true || ah->aspm_enabled != true)
return;
/* Nothing to do on restore for 11N */

6
drivers/net/wireless/ath/ath9k/ar9003_hw.c
Просмотреть файл

@ -519,11 +519,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
int restore,
int power_off)
{
if (ah->is_pciexpress != true)
return;
/* Do not touch SerDes registers */
if (ah->config.pcie_powersave_enable == 2)
if (ah->is_pciexpress != true || ah->aspm_enabled != true)
return;
/* Nothing to do on restore for 11N */

11
drivers/net/wireless/ath/ath9k/hw.c
Просмотреть файл

@ -318,6 +318,14 @@ static void ath9k_hw_disablepcie(struct ath_hw *ah)
REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
}
static void ath9k_hw_aspm_init(struct ath_hw *ah)
{
struct ath_common *common = ath9k_hw_common(ah);
if (common->bus_ops->aspm_init)
common->bus_ops->aspm_init(common);
}
/* This should work for all families including legacy */
static bool ath9k_hw_chip_test(struct ath_hw *ah)
{
@ -378,7 +386,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
ah->config.additional_swba_backoff = 0;
ah->config.ack_6mb = 0x0;
ah->config.cwm_ignore_extcca = 0;
ah->config.pcie_powersave_enable = 0;
ah->config.pcie_clock_req = 0;
ah->config.pcie_waen = 0;
ah->config.analog_shiftreg = 1;
@ -598,7 +605,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
if (ah->is_pciexpress)
ath9k_hw_configpcipowersave(ah, 0, 0);
ath9k_hw_aspm_init(ah);
else
ath9k_hw_disablepcie(ah);

3
drivers/net/wireless/ath/ath9k/hw.h
Просмотреть файл

@ -219,7 +219,6 @@ struct ath9k_ops_config {
int additional_swba_backoff;
int ack_6mb;
u32 cwm_ignore_extcca;
u8 pcie_powersave_enable;
bool pcieSerDesWrite;
u8 pcie_clock_req;
u32 pcie_waen;
@ -673,6 +672,7 @@ struct ath_hw {
bool sw_mgmt_crypto;
bool is_pciexpress;
bool aspm_enabled;
bool is_monitoring;
bool need_an_top2_fixup;
u16 tx_trig_level;
@ -874,6 +874,7 @@ struct ath_bus_ops {
bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
void (*bt_coex_prep)(struct ath_common *common);
void (*extn_synch_en)(struct ath_common *common);
void (*aspm_init)(struct ath_common *common);
};
static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)

2
drivers/net/wireless/ath/ath9k/init.c
Просмотреть файл

@ -670,8 +670,10 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
static void ath9k_init_txpower_limits(struct ath_softc *sc)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath9k_channel *curchan = ah->curchan;
ah->txchainmask = common->tx_chainmask;
if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
ath9k_init_band_txpower(sc, IEEE80211_BAND_2GHZ);
if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)

27
drivers/net/wireless/ath/ath9k/pci.c
Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/nl80211.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/ath9k_platform.h>
#include "ath9k.h"
@ -115,12 +116,38 @@ static void ath_pci_extn_synch_enable(struct ath_common *common)
pci_write_config_byte(pdev, sc->sc_ah->caps.pcie_lcr_offset, lnkctl);
}
static void ath_pci_aspm_init(struct ath_common *common)
{
struct ath_softc *sc = (struct ath_softc *) common->priv;
struct ath_hw *ah = sc->sc_ah;
struct pci_dev *pdev = to_pci_dev(sc->dev);
struct pci_dev *parent;
int pos;
u8 aspm;
if (!pci_is_pcie(pdev))
return;
parent = pdev->bus->self;
if (WARN_ON(!parent))
return;
pos = pci_pcie_cap(parent);
pci_read_config_byte(parent, pos + PCI_EXP_LNKCTL, &aspm);
if (aspm & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
ah->aspm_enabled = true;
/* Initialize PCIe PM and SERDES registers. */
ath9k_hw_configpcipowersave(ah, 0, 0);
}
}
static const struct ath_bus_ops ath_pci_bus_ops = {
.ath_bus_type = ATH_PCI,
.read_cachesize = ath_pci_read_cachesize,
.eeprom_read = ath_pci_eeprom_read,
.bt_coex_prep = ath_pci_bt_coex_prep,
.extn_synch_en = ath_pci_extn_synch_enable,
.aspm_init = ath_pci_aspm_init,
};
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)

6
drivers/net/wireless/iwlegacy/iwl-3945.c
Просмотреть файл

@ -1746,7 +1746,11 @@ int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
}
memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
/*
* We do not commit tx power settings while channel changing,
* do it now if tx power changed.
*/
iwl_legacy_set_tx_power(priv, priv->tx_power_next, false);
return 0;
}

8
drivers/net/wireless/iwlegacy/iwl-4965.c
Просмотреть файл

@ -1235,7 +1235,12 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c
memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
iwl_legacy_print_rx_config_cmd(priv, ctx);
goto set_tx_power;
/*
* We do not commit tx power settings while channel changing,
* do it now if tx power changed.
*/
iwl_legacy_set_tx_power(priv, priv->tx_power_next, false);
return 0;
}
/* If we are currently associated and the new config requires
@ -1315,7 +1320,6 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c
iwl4965_init_sensitivity(priv);
set_tx_power:
/* If we issue a new RXON command which required a tune then we must
* send a new TXPOWER command or we won't be able to Tx any frames */
ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true);

1
drivers/net/wireless/iwlwifi/iwl-5000.c
Просмотреть файл

@ -365,6 +365,7 @@ static struct iwl_base_params iwl5000_base_params = {
.chain_noise_scale = 1000,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
.no_idle_support = true,
};
static struct iwl_ht_params iwl5000_ht_params = {
.ht_greenfield_support = true,

2
drivers/net/wireless/iwlwifi/iwl-core.h
Просмотреть файл

@ -135,6 +135,7 @@ struct iwl_mod_params {
* @temperature_kelvin: temperature report by uCode in kelvin
* @max_event_log_size: size of event log buffer size for ucode event logging
* @shadow_reg_enable: HW shadhow register bit
* @no_idle_support: do not support idle mode
*/
struct iwl_base_params {
int eeprom_size;
@ -156,6 +157,7 @@ struct iwl_base_params {
bool temperature_kelvin;
u32 max_event_log_size;
const bool shadow_reg_enable;
const bool no_idle_support;
};
/*
* @advanced_bt_coexist: support advanced bt coexist

18
drivers/net/wireless/iwlwifi/iwl-pci.c
Просмотреть файл

@ -134,6 +134,7 @@ static void iwl_pci_apm_config(struct iwl_bus *bus)
static void iwl_pci_set_drv_data(struct iwl_bus *bus, void *drv_data)
{
bus->drv_data = drv_data;
pci_set_drvdata(IWL_BUS_GET_PCI_DEV(bus), drv_data);
}
static void iwl_pci_get_hw_id(struct iwl_bus *bus, char buf[],
@ -454,8 +455,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
}
pci_set_drvdata(pdev, bus);
bus->dev = &pdev->dev;
bus->irq = pdev->irq;
bus->ops = &pci_ops;
@ -494,11 +493,12 @@ static void iwl_pci_down(struct iwl_bus *bus)
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
{
struct iwl_bus *bus = pci_get_drvdata(pdev);
struct iwl_priv *priv = pci_get_drvdata(pdev);
void *bus_specific = priv->bus->bus_specific;
iwl_remove(bus->drv_data);
iwl_remove(priv);
iwl_pci_down(bus);
iwl_pci_down(bus_specific);
}
#ifdef CONFIG_PM
@ -506,20 +506,20 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
static int iwl_pci_suspend(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct iwl_bus *bus = pci_get_drvdata(pdev);
struct iwl_priv *priv = pci_get_drvdata(pdev);
/* Before you put code here, think about WoWLAN. You cannot check here
* whether WoWLAN is enabled or not, and your code will run even if
* WoWLAN is enabled - don't kill the NIC, someone may need it in Sx.
*/
return iwl_suspend(bus->drv_data);
return iwl_suspend(priv);
}
static int iwl_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct iwl_bus *bus = pci_get_drvdata(pdev);
struct iwl_priv *priv = pci_get_drvdata(pdev);
/* Before you put code here, think about WoWLAN. You cannot check here
* whether WoWLAN is enabled or not, and your code will run even if
@ -532,7 +532,7 @@ static int iwl_pci_resume(struct device *device)
*/
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
return iwl_resume(bus->drv_data);
return iwl_resume(priv);
}
static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume);

3
drivers/net/wireless/iwlwifi/iwl-power.c
Просмотреть файл

@ -349,7 +349,8 @@ static void iwl_power_build_cmd(struct iwl_priv *priv,
if (priv->wowlan)
iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
else if (priv->hw->conf.flags & IEEE80211_CONF_IDLE)
else if (!priv->cfg->base_params->no_idle_support &&
priv->hw->conf.flags & IEEE80211_CONF_IDLE)
iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
else if (iwl_tt_is_low_power_state(priv)) {
/* in thermal throttling low power state */

3
drivers/net/wireless/rt2x00/rt2800lib.c
Просмотреть файл

@ -703,8 +703,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
/*
* Add space for the TXWI in front of the skb.
*/
skb_push(entry->skb, TXWI_DESC_SIZE);
memset(entry->skb, 0, TXWI_DESC_SIZE);
memset(skb_push(entry->skb, TXWI_DESC_SIZE), 0, TXWI_DESC_SIZE);
/*
* Register descriptor details in skb frame descriptor.

3
drivers/net/wireless/rt2x00/rt2x00lib.h
Просмотреть файл

@ -355,7 +355,8 @@ static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *
return CIPHER_NONE;
}
static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry,
static inline void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
struct txentry_desc *txdesc)
{
}

5
drivers/net/wireless/rt2x00/rt2x00mac.c
Просмотреть файл

@ -113,7 +113,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
* due to possible race conditions in mac80211.
*/
if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
goto exit_fail;
goto exit_free_skb;
/*
* Use the ATIM queue if appropriate and present.
@ -127,7 +127,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
ERROR(rt2x00dev,
"Attempt to send packet over invalid queue %d.\n"
"Please file bug report to %s.\n", qid, DRV_PROJECT);
goto exit_fail;
goto exit_free_skb;
}
/*
@ -159,6 +159,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
exit_fail:
rt2x00queue_pause_queue(queue);
exit_free_skb:
dev_kfree_skb_any(skb);
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);

20
drivers/net/wireless/rtlwifi/pci.c
Просмотреть файл

@ -1696,15 +1696,17 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
pcipriv->ndis_adapter.devnumber = PCI_SLOT(pdev->devfn);
pcipriv->ndis_adapter.funcnumber = PCI_FUNC(pdev->devfn);
/*find bridge info */
pcipriv->ndis_adapter.pcibridge_vendorid = bridge_pdev->vendor;
for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) {
if (bridge_pdev->vendor == pcibridge_vendors[tmp]) {
pcipriv->ndis_adapter.pcibridge_vendor = tmp;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
("Pci Bridge Vendor is found index: %d\n",
tmp));
break;
if (bridge_pdev) {
/*find bridge info if available */
pcipriv->ndis_adapter.pcibridge_vendorid = bridge_pdev->vendor;
for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) {
if (bridge_pdev->vendor == pcibridge_vendors[tmp]) {
pcipriv->ndis_adapter.pcibridge_vendor = tmp;
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
("Pci Bridge Vendor is found index:"
" %d\n", tmp));
break;
}
}
}

2
include/net/cipso_ipv4.h
Просмотреть файл

@ -8,7 +8,7 @@
* have chosen to adopt the protocol and over the years it has become a
* de-facto standard for labeled networking.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

17
include/net/dst.h
Просмотреть файл

@ -37,7 +37,7 @@ struct dst_entry {
unsigned long _metrics;
unsigned long expires;
struct dst_entry *path;
struct neighbour *_neighbour;
struct neighbour __rcu *_neighbour;
#ifdef CONFIG_XFRM
struct xfrm_state *xfrm;
#else
@ -88,12 +88,17 @@ struct dst_entry {
static inline struct neighbour *dst_get_neighbour(struct dst_entry *dst)
{
return dst->_neighbour;
return rcu_dereference(dst->_neighbour);
}
static inline struct neighbour *dst_get_neighbour_raw(struct dst_entry *dst)
{
return rcu_dereference_raw(dst->_neighbour);
}
static inline void dst_set_neighbour(struct dst_entry *dst, struct neighbour *neigh)
{
dst->_neighbour = neigh;
rcu_assign_pointer(dst->_neighbour, neigh);
}
extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old);
@ -382,8 +387,12 @@ static inline void dst_rcu_free(struct rcu_head *head)
static inline void dst_confirm(struct dst_entry *dst)
{
if (dst) {
struct neighbour *n = dst_get_neighbour(dst);
struct neighbour *n;
rcu_read_lock();
n = dst_get_neighbour(dst);
neigh_confirm(n);
rcu_read_unlock();
}
}

2
include/net/netlabel.h
Просмотреть файл

@ -4,7 +4,7 @@
* The NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/atm/br2684.c
Просмотреть файл

@ -242,8 +242,6 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
if (brdev->payload == p_bridged) {
skb_push(skb, 2);
memset(skb->data, 0, 2);
} else { /* p_routed */
skb_pull(skb, ETH_HLEN);
}
}
skb_debug(skb);

17
net/core/skbuff.c
Просмотреть файл

@ -1369,8 +1369,21 @@ pull_pages:
}
EXPORT_SYMBOL(__pskb_pull_tail);
/* Copy some data bits from skb to kernel buffer. */
/**
* skb_copy_bits - copy bits from skb to kernel buffer
* @skb: source skb
* @offset: offset in source
* @to: destination buffer
* @len: number of bytes to copy
*
* Copy the specified number of bytes from the source skb to the
* destination buffer.
*
* CAUTION ! :
* If its prototype is ever changed,
* check arch/{*}/net/{*}.S files,
* since it is called from BPF assembly code.
*/
int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len)
{
int start = skb_headlen(skb);

2
net/ipv4/igmp.c
Просмотреть файл

@ -1718,7 +1718,7 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
pmc->sfcount[sfmode]--;
for (j=0; j<i; j++)
(void) ip_mc_del1_src(pmc, sfmode, &psfsrc[i]);
(void) ip_mc_del1_src(pmc, sfmode, &psfsrc[j]);
} else if (isexclude != (pmc->sfcount[MCAST_EXCLUDE] != 0)) {
#ifdef CONFIG_IP_MULTICAST
struct ip_sf_list *psf;

10
net/ipv4/ip_output.c
Просмотреть файл

@ -204,9 +204,15 @@ static inline int ip_finish_output2(struct sk_buff *skb)
skb = skb2;
}
rcu_read_lock();
neigh = dst_get_neighbour(dst);
if (neigh)
return neigh_output(neigh, skb);
if (neigh) {
int res = neigh_output(neigh, skb);
rcu_read_unlock();
return res;
}
rcu_read_unlock();
if (net_ratelimit())
printk(KERN_DEBUG "ip_finish_output2: No header cache and no neighbour!\n");

14
net/ipv4/route.c
Просмотреть файл

@ -1628,16 +1628,18 @@ static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer)
{
struct rtable *rt = (struct rtable *) dst;
__be32 orig_gw = rt->rt_gateway;
struct neighbour *n;
struct neighbour *n, *old_n;
dst_confirm(&rt->dst);
neigh_release(dst_get_neighbour(&rt->dst));
dst_set_neighbour(&rt->dst, NULL);
rt->rt_gateway = peer->redirect_learned.a4;
rt_bind_neighbour(rt);
n = dst_get_neighbour(&rt->dst);
n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway);
if (IS_ERR(n))
return PTR_ERR(n);
old_n = xchg(&rt->dst._neighbour, n);
if (old_n)
neigh_release(old_n);
if (!n || !(n->nud_state & NUD_VALID)) {
if (n)
neigh_event_send(n, NULL);

2
net/ipv6/addrconf.c
Просмотреть файл

@ -656,7 +656,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen,
* layer address of our nexhop router
*/
if (dst_get_neighbour(&rt->dst) == NULL)
if (dst_get_neighbour_raw(&rt->dst) == NULL)
ifa->flags &= ~IFA_F_OPTIMISTIC;
ifa->idev = idev;

11
net/ipv6/datagram.c
Просмотреть файл

@ -33,6 +33,11 @@
#include <linux/errqueue.h>
#include <asm/uaccess.h>
static inline int ipv6_mapped_addr_any(const struct in6_addr *a)
{
return (ipv6_addr_v4mapped(a) && (a->s6_addr32[3] == 0));
}
int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;
@ -102,10 +107,12 @@ ipv4_connected:
ipv6_addr_set_v4mapped(inet->inet_daddr, &np->daddr);
if (ipv6_addr_any(&np->saddr))
if (ipv6_addr_any(&np->saddr) ||
ipv6_mapped_addr_any(&np->saddr))
ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
if (ipv6_addr_any(&np->rcv_saddr)) {
if (ipv6_addr_any(&np->rcv_saddr) ||
ipv6_mapped_addr_any(&np->rcv_saddr)) {
ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
&np->rcv_saddr);
if (sk->sk_prot->rehash)

2
net/ipv6/ip6_fib.c
Просмотреть файл

@ -1455,7 +1455,7 @@ static int fib6_age(struct rt6_info *rt, void *arg)
RT6_TRACE("aging clone %p\n", rt);
return -1;
} else if ((rt->rt6i_flags & RTF_GATEWAY) &&
(!(dst_get_neighbour(&rt->dst)->flags & NTF_ROUTER))) {
(!(dst_get_neighbour_raw(&rt->dst)->flags & NTF_ROUTER))) {
RT6_TRACE("purging route %p via non-router but gateway\n",
rt);
return -1;

13
net/ipv6/ip6_output.c
Просмотреть файл

@ -135,10 +135,15 @@ static int ip6_finish_output2(struct sk_buff *skb)
skb->len);
}
rcu_read_lock();
neigh = dst_get_neighbour(dst);
if (neigh)
return neigh_output(neigh, skb);
if (neigh) {
int res = neigh_output(neigh, skb);
rcu_read_unlock();
return res;
}
rcu_read_unlock();
IP6_INC_STATS_BH(dev_net(dst->dev),
ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES);
kfree_skb(skb);
@ -975,12 +980,14 @@ static int ip6_dst_lookup_tail(struct sock *sk,
* dst entry and replace it instead with the
* dst entry of the nexthop router
*/
rcu_read_lock();
n = dst_get_neighbour(*dst);
if (n && !(n->nud_state & NUD_VALID)) {
struct inet6_ifaddr *ifp;
struct flowi6 fl_gw6;
int redirect;
rcu_read_unlock();
ifp = ipv6_get_ifaddr(net, &fl6->saddr,
(*dst)->dev, 1);
@ -1000,6 +1007,8 @@ static int ip6_dst_lookup_tail(struct sock *sk,
if ((err = (*dst)->error))
goto out_err_release;
}
} else {
rcu_read_unlock();
}
#endif

35
net/ipv6/route.c
Просмотреть файл

@ -364,7 +364,7 @@ out:
#ifdef CONFIG_IPV6_ROUTER_PREF
static void rt6_probe(struct rt6_info *rt)
{
struct neighbour *neigh = rt ? dst_get_neighbour(&rt->dst) : NULL;
struct neighbour *neigh;
/*
* Okay, this does not seem to be appropriate
* for now, however, we need to check if it
@ -373,8 +373,10 @@ static void rt6_probe(struct rt6_info *rt)
* Router Reachability Probe MUST be rate-limited
* to no more than one per minute.
*/
rcu_read_lock();
neigh = rt ? dst_get_neighbour(&rt->dst) : NULL;
if (!neigh || (neigh->nud_state & NUD_VALID))
return;
goto out;
read_lock_bh(&neigh->lock);
if (!(neigh->nud_state & NUD_VALID) &&
time_after(jiffies, neigh->updated + rt->rt6i_idev->cnf.rtr_probe_interval)) {
@ -387,8 +389,11 @@ static void rt6_probe(struct rt6_info *rt)
target = (struct in6_addr *)&neigh->primary_key;
addrconf_addr_solict_mult(target, &mcaddr);
ndisc_send_ns(rt->rt6i_dev, NULL, target, &mcaddr, NULL);
} else
} else {
read_unlock_bh(&neigh->lock);
}
out:
rcu_read_unlock();
}
#else
static inline void rt6_probe(struct rt6_info *rt)
@ -412,8 +417,11 @@ static inline int rt6_check_dev(struct rt6_info *rt, int oif)
static inline int rt6_check_neigh(struct rt6_info *rt)
{
struct neighbour *neigh = dst_get_neighbour(&rt->dst);
struct neighbour *neigh;
int m;
rcu_read_lock();
neigh = dst_get_neighbour(&rt->dst);
if (rt->rt6i_flags & RTF_NONEXTHOP ||
!(rt->rt6i_flags & RTF_GATEWAY))
m = 1;
@ -430,6 +438,7 @@ static inline int rt6_check_neigh(struct rt6_info *rt)
read_unlock_bh(&neigh->lock);
} else
m = 0;
rcu_read_unlock();
return m;
}
@ -769,7 +778,7 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort,
rt->rt6i_dst.plen = 128;
rt->rt6i_flags |= RTF_CACHE;
rt->dst.flags |= DST_HOST;
dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour(&ort->dst)));
dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst)));
}
return rt;
}
@ -803,7 +812,7 @@ restart:
dst_hold(&rt->dst);
read_unlock_bh(&table->tb6_lock);
if (!dst_get_neighbour(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP))
if (!dst_get_neighbour_raw(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP))
nrt = rt6_alloc_cow(rt, &fl6->daddr, &fl6->saddr);
else if (!(rt->dst.flags & DST_HOST))
nrt = rt6_alloc_clone(rt, &fl6->daddr);
@ -1587,7 +1596,7 @@ void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src,
dst_confirm(&rt->dst);
/* Duplicate redirect: silently ignore. */
if (neigh == dst_get_neighbour(&rt->dst))
if (neigh == dst_get_neighbour_raw(&rt->dst))
goto out;
nrt = ip6_rt_copy(rt, dest);
@ -1682,7 +1691,7 @@ again:
1. It is connected route. Action: COW
2. It is gatewayed route or NONEXTHOP route. Action: clone it.
*/
if (!dst_get_neighbour(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP))
if (!dst_get_neighbour_raw(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP))
nrt = rt6_alloc_cow(rt, daddr, saddr);
else
nrt = rt6_alloc_clone(rt, daddr);
@ -2326,6 +2335,7 @@ static int rt6_fill_node(struct net *net,
struct nlmsghdr *nlh;
long expires;
u32 table;
struct neighbour *n;
if (prefix) { /* user wants prefix routes only */
if (!(rt->rt6i_flags & RTF_PREFIX_RT)) {
@ -2414,8 +2424,11 @@ static int rt6_fill_node(struct net *net,
if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
goto nla_put_failure;
if (dst_get_neighbour(&rt->dst))
NLA_PUT(skb, RTA_GATEWAY, 16, &dst_get_neighbour(&rt->dst)->primary_key);
rcu_read_lock();
n = dst_get_neighbour(&rt->dst);
if (n)
NLA_PUT(skb, RTA_GATEWAY, 16, &n->primary_key);
rcu_read_unlock();
if (rt->dst.dev)
NLA_PUT_U32(skb, RTA_OIF, rt->rt6i_dev->ifindex);
@ -2608,12 +2621,14 @@ static int rt6_info_route(struct rt6_info *rt, void *p_arg)
#else
seq_puts(m, "00000000000000000000000000000000 00 ");
#endif
rcu_read_lock();
n = dst_get_neighbour(&rt->dst);
if (n) {
seq_printf(m, "%pi6", n->primary_key);
} else {
seq_puts(m, "00000000000000000000000000000000");
}
rcu_read_unlock();
seq_printf(m, " %08x %08x %08x %08x %8s\n",
rt->rt6i_metric, atomic_read(&rt->dst.__refcnt),
rt->dst.__use, rt->rt6i_flags,

1
net/netfilter/ipvs/ip_vs_ctl.c
Просмотреть файл

@ -3771,6 +3771,7 @@ err_sock:
void ip_vs_control_cleanup(void)
{
EnterFunction(2);
unregister_netdevice_notifier(&ip_vs_dst_notifier);
ip_vs_genl_unregister();
nf_unregister_sockopt(&ip_vs_sockopts);
LeaveFunction(2);

2
net/netlabel/Makefile
Просмотреть файл

@ -1,8 +1,6 @@
#
# Makefile for the NetLabel subsystem.
#
# Feb 9, 2006, Paul Moore <paul.moore@hp.com>
#
# base objects
obj-y := netlabel_user.o netlabel_kapi.o

2
net/netlabel/netlabel_addrlist.c
Просмотреть файл

@ -6,7 +6,7 @@
* system manages static and dynamic label mappings for network protocols such
* as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_addrlist.h
Просмотреть файл

@ -6,7 +6,7 @@
* system manages static and dynamic label mappings for network protocols such
* as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_cipso_v4.c
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_cipso_v4.h
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_domainhash.c
Просмотреть файл

@ -6,7 +6,7 @@
* system manages static and dynamic label mappings for network protocols such
* as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_domainhash.h
Просмотреть файл

@ -6,7 +6,7 @@
* system manages static and dynamic label mappings for network protocols such
* as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_kapi.c
Просмотреть файл

@ -5,7 +5,7 @@
* system manages static and dynamic label mappings for network protocols such
* as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_mgmt.c
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_mgmt.h
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_unlabeled.c
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system. The NetLabel system manages static and dynamic label
* mappings for network protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_unlabeled.h
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system. The NetLabel system manages static and dynamic label
* mappings for network protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_user.c
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
net/netlabel/netlabel_user.h
Просмотреть файл

@ -5,7 +5,7 @@
* NetLabel system manages static and dynamic label mappings for network
* protocols such as CIPSO and RIPSO.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

7
net/sched/sch_sfq.c
Просмотреть файл

@ -410,7 +410,12 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
/* Return Congestion Notification only if we dropped a packet
* from this flow.
*/
return (qlen != slot->qlen) ? NET_XMIT_CN : NET_XMIT_SUCCESS;
if (qlen != slot->qlen)
return NET_XMIT_CN;
/* As we dropped a packet, better let upper stack know this */
qdisc_tree_decrease_qlen(sch, 1);
return NET_XMIT_SUCCESS;
}
static struct sk_buff *

73
net/socket.c
Просмотреть файл

@ -1871,8 +1871,14 @@ SYSCALL_DEFINE2(shutdown, int, fd, int, how)
#define COMPAT_NAMELEN(msg) COMPAT_MSG(msg, msg_namelen)
#define COMPAT_FLAGS(msg) COMPAT_MSG(msg, msg_flags)
struct used_address {
struct sockaddr_storage name;
unsigned int name_len;
};
static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
struct msghdr *msg_sys, unsigned flags, int nosec)
struct msghdr *msg_sys, unsigned flags,
struct used_address *used_address)
{
struct compat_msghdr __user *msg_compat =
(struct compat_msghdr __user *)msg;
@ -1953,8 +1959,28 @@ static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
if (sock->file->f_flags & O_NONBLOCK)
msg_sys->msg_flags |= MSG_DONTWAIT;
err = (nosec ? sock_sendmsg_nosec : sock_sendmsg)(sock, msg_sys,
total_len);
/*
* If this is sendmmsg() and current destination address is same as
* previously succeeded address, omit asking LSM's decision.
* used_address->name_len is initialized to UINT_MAX so that the first
* destination address never matches.
*/
if (used_address && used_address->name_len == msg_sys->msg_namelen &&
!memcmp(&used_address->name, msg->msg_name,
used_address->name_len)) {
err = sock_sendmsg_nosec(sock, msg_sys, total_len);
goto out_freectl;
}
err = sock_sendmsg(sock, msg_sys, total_len);
/*
* If this is sendmmsg() and sending to current destination address was
* successful, remember it.
*/
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
memcpy(&used_address->name, msg->msg_name,
used_address->name_len);
}
out_freectl:
if (ctl_buf != ctl)
@ -1979,7 +2005,7 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
if (!sock)
goto out;
err = __sys_sendmsg(sock, msg, &msg_sys, flags, 0);
err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL);
fput_light(sock->file, fput_needed);
out:
@ -1998,6 +2024,10 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
struct mmsghdr __user *entry;
struct compat_mmsghdr __user *compat_entry;
struct msghdr msg_sys;
struct used_address used_address;
if (vlen > UIO_MAXIOV)
vlen = UIO_MAXIOV;
datagrams = 0;
@ -2005,27 +2035,22 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
if (!sock)
return err;
err = sock_error(sock->sk);
if (err)
goto out_put;
used_address.name_len = UINT_MAX;
entry = mmsg;
compat_entry = (struct compat_mmsghdr __user *)mmsg;
err = 0;
while (datagrams < vlen) {
/*
* No need to ask LSM for more than the first datagram.
*/
if (MSG_CMSG_COMPAT & flags) {
err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
&msg_sys, flags, datagrams);
&msg_sys, flags, &used_address);
if (err < 0)
break;
err = __put_user(err, &compat_entry->msg_len);
++compat_entry;
} else {
err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
&msg_sys, flags, datagrams);
&msg_sys, flags, &used_address);
if (err < 0)
break;
err = put_user(err, &entry->msg_len);
@ -2037,30 +2062,12 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
++datagrams;
}
out_put:
fput_light(sock->file, fput_needed);
if (err == 0)
/* We only return an error if no datagrams were able to be sent */
if (datagrams != 0)
return datagrams;
if (datagrams != 0) {
/*
* We may send less entries than requested (vlen) if the
* sock is non blocking...
*/
if (err != -EAGAIN) {
/*
* ... or if sendmsg returns an error after we
* send some datagrams, where we record the
* error to return on the next call or if the
* app asks about it using getsockopt(SO_ERROR).
*/
sock->sk->sk_err = -err;
}
return datagrams;
}
return err;
}

1
net/sunrpc/xprt.c
Просмотреть файл

@ -187,6 +187,7 @@ EXPORT_SYMBOL_GPL(xprt_load_transport);
/**
* xprt_reserve_xprt - serialize write access to transports
* @task: task that is requesting access to the transport
* @xprt: pointer to the target transport
*
* This prevents mixing the payload of separate requests, and prevents
* transport connects from colliding with writes. No congestion control

2
net/wireless/nl80211.c
Просмотреть файл

@ -3464,7 +3464,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
tmp) {
enum ieee80211_band band = nla_type(attr);
if (band < 0 || band > IEEE80211_NUM_BANDS) {
if (band < 0 || band >= IEEE80211_NUM_BANDS) {
err = -EINVAL;
goto out_free;
}

4
net/xfrm/xfrm_algo.c
Просмотреть файл

@ -462,8 +462,8 @@ static struct xfrm_algo_desc ealg_list[] = {
.desc = {
.sadb_alg_id = SADB_X_EALG_AESCTR,
.sadb_alg_ivlen = 8,
.sadb_alg_minbits = 128,
.sadb_alg_maxbits = 256
.sadb_alg_minbits = 160,
.sadb_alg_maxbits = 288
}
},
};

2
security/selinux/hooks.c
Просмотреть файл

@ -14,7 +14,7 @@
* Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
* <dgoeddel@trustedcs.com>
* Copyright (C) 2006, 2007, 2009 Hewlett-Packard Development Company, L.P.
* Paul Moore <paul.moore@hp.com>
* Paul Moore <paul@paul-moore.com>
* Copyright (C) 2007 Hitachi Software Engineering Co., Ltd.
* Yuichi Nakamura <ynakam@hitachisoft.jp>
*

2
security/selinux/include/netif.h
Просмотреть файл

@ -8,7 +8,7 @@
*
* Copyright (C) 2003 Red Hat, Inc., James Morris <jmorris@redhat.com>
* Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
* Paul Moore, <paul.moore@hp.com>
* Paul Moore <paul@paul-moore.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2,

2
security/selinux/include/netlabel.h
Просмотреть файл

@ -1,7 +1,7 @@
/*
* SELinux interface to the NetLabel subsystem
*
* Author : Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
security/selinux/include/netnode.h
Просмотреть файл

@ -6,7 +6,7 @@
* needed to reduce the lookup overhead since most of these queries happen on
* a per-packet basis.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
security/selinux/include/netport.h
Просмотреть файл

@ -5,7 +5,7 @@
* mapping is maintained as part of the normal policy but a fast cache is
* needed to reduce the lookup overhead.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
security/selinux/netif.c
Просмотреть файл

@ -8,7 +8,7 @@
*
* Copyright (C) 2003 Red Hat, Inc., James Morris <jmorris@redhat.com>
* Copyright (C) 2007 Hewlett-Packard Development Company, L.P.
* Paul Moore <paul.moore@hp.com>
* Paul Moore <paul@paul-moore.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2,

2
security/selinux/netlabel.c
Просмотреть файл

@ -4,7 +4,7 @@
* This file provides the necessary glue to tie NetLabel into the SELinux
* subsystem.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
*/

2
security/selinux/netnode.c
Просмотреть файл

@ -6,7 +6,7 @@
* needed to reduce the lookup overhead since most of these queries happen on
* a per-packet basis.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
* This code is heavily based on the "netif" concept originally developed by
* James Morris <jmorris@redhat.com>

2
security/selinux/netport.c
Просмотреть файл

@ -5,7 +5,7 @@
* mapping is maintained as part of the normal policy but a fast cache is
* needed to reduce the lookup overhead.
*
* Author: Paul Moore <paul.moore@hp.com>
* Author: Paul Moore <paul@paul-moore.com>
*
* This code is heavily based on the "netif" concept originally developed by
* James Morris <jmorris@redhat.com>

2
security/selinux/selinuxfs.c
Просмотреть файл

@ -2,7 +2,7 @@
*
* Added conditional policy language extensions
*
* Updated: Hewlett-Packard <paul.moore@hp.com>
* Updated: Hewlett-Packard <paul@paul-moore.com>
*
* Added support for the policy capability bitmap
*

2
security/selinux/ss/ebitmap.c
Просмотреть файл

@ -4,7 +4,7 @@
* Author : Stephen Smalley, <sds@epoch.ncsc.mil>
*/
/*
* Updated: Hewlett-Packard <paul.moore@hp.com>
* Updated: Hewlett-Packard <paul@paul-moore.com>
*
* Added support to import/export the NetLabel category bitmap
*

2
security/selinux/ss/mls.c
Просмотреть файл

@ -11,7 +11,7 @@
* Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
*/
/*
* Updated: Hewlett-Packard <paul.moore@hp.com>
* Updated: Hewlett-Packard <paul@paul-moore.com>
*
* Added support to import/export the MLS label from NetLabel
*

2
security/selinux/ss/mls.h
Просмотреть файл

@ -11,7 +11,7 @@
* Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
*/
/*
* Updated: Hewlett-Packard <paul.moore@hp.com>
* Updated: Hewlett-Packard <paul@paul-moore.com>
*
* Added support to import/export the MLS label from NetLabel
*

2
security/selinux/ss/policydb.c
Просмотреть файл

@ -13,7 +13,7 @@
*
* Added conditional policy language extensions
*
* Updated: Hewlett-Packard <paul.moore@hp.com>
* Updated: Hewlett-Packard <paul@paul-moore.com>
*
* Added support for the policy capability bitmap
*

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше