ARM: EXYNOS5: Fix kernel dump in AFTR idle mode

The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.

This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Tested-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-exynos/include/mach/regs-pmu.h

@@ -344,6 +344,7 @@
 #define EXYNOS5_FSYS_ARM_OPTION					S5P_PMUREG(0x2208)
 #define EXYNOS5_ISP_ARM_OPTION					S5P_PMUREG(0x2288)
 #define EXYNOS5_ARM_COMMON_OPTION				S5P_PMUREG(0x2408)
+#define EXYNOS5_ARM_L2_OPTION					S5P_PMUREG(0x2608)
 #define EXYNOS5_TOP_PWR_OPTION					S5P_PMUREG(0x2C48)
 #define EXYNOS5_TOP_PWR_SYSMEM_OPTION				S5P_PMUREG(0x2CC8)
 #define EXYNOS5_JPEG_MEM_OPTION					S5P_PMUREG(0x2F48)

arch/arm/mach-exynos/pmu.c

@@ -228,6 +228,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = {
 	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
 	{ EXYNOS5_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
 	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
+	{ EXYNOS5_ARM_L2_OPTION,			{ 0x10, 0x10, 0x0 } },
 	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
 	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
 	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
@@ -353,11 +354,9 @@ static void exynos5_init_pmu(void)
 
 	/*
 	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
-	 * MANUAL_L2RSTDISABLE_CONTROL_BITFIELD Enable
 	 */
 	tmp = __raw_readl(EXYNOS5_ARM_COMMON_OPTION);
-	tmp |= (EXYNOS5_MANUAL_L2RSTDISABLE_CONTROL |
-		EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN);
+	tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
 	__raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
 
 	/*