Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c

CREDITS

@@ -3738,7 +3738,7 @@ S: 93149 Nittenau
 S: Germany
 
 N: Gertjan van Wingerde
-E: gwingerde@home.nl
+E: gwingerde@gmail.com
 D: Ralink rt2x00 WLAN driver
 D: Minix V2 file-system
 D: Misc fixes

Documentation/ABI/testing/ima_policy

@@ -0,0 +1,61 @@
+What:		security/ima/policy
+Date:		May 2008
+Contact:	Mimi Zohar <zohar@us.ibm.com>
+Description:
+		The Trusted Computing Group(TCG) runtime Integrity
+		Measurement Architecture(IMA) maintains a list of hash
+		values of executables and other sensitive system files
+		loaded into the run-time of this system.  At runtime,
+		the policy can be constrained based on LSM specific data.
+		Policies are loaded into the securityfs file ima/policy
+		by opening the file, writing the rules one at a time and
+		then closing the file.  The new policy takes effect after
+		the file ima/policy is closed.
+
+		rule format: action [condition ...]
+
+		action: measure | dont_measure
+		condition:= base | lsm
+			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			lsm:	[[subj_user=] [subj_role=] [subj_type=]
+				 [obj_user=] [obj_role=] [obj_type=]]
+
+		base: 	func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
+			fsmagic:= hex value
+			uid:= decimal value
+		lsm:  	are LSM specific
+
+		default policy:
+			# PROC_SUPER_MAGIC
+			dont_measure fsmagic=0x9fa0
+			# SYSFS_MAGIC
+			dont_measure fsmagic=0x62656572
+			# DEBUGFS_MAGIC
+			dont_measure fsmagic=0x64626720
+			# TMPFS_MAGIC
+			dont_measure fsmagic=0x01021994
+			# SECURITYFS_MAGIC
+			dont_measure fsmagic=0x73636673
+
+			measure func=BPRM_CHECK
+			measure func=FILE_MMAP mask=MAY_EXEC
+			measure func=INODE_PERM mask=MAY_READ uid=0
+
+		The default policy measures all executables in bprm_check,
+		all files mmapped executable in file_mmap, and all files
+		open for read by root in inode_permission.
+
+		Examples of LSM specific definitions:
+
+		SELinux:
+			# SELINUX_MAGIC
+			dont_measure fsmagic=0xF97CFF8C
+
+			dont_measure obj_type=var_log_t
+			dont_measure obj_type=auditd_log_t
+			measure subj_user=system_u func=INODE_PERM mask=MAY_READ
+			measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+
+		Smack:
+			measure subj_user=_ func=INODE_PERM mask=MAY_READ

Documentation/DocBook/Makefile

@@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):

Documentation/DocBook/alsa-driver-api.tmpl

@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<?xml version="1.0" encoding="UTF-8"?>
-
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-<book>
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-<?dbhtml filename="index.html">
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,6 +35,8 @@
 
   </bookinfo>
 
+<toc></toc>
+
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -71,6 +73,10 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -88,6 +94,9 @@
   <chapter><title>Miscellaneous Functions</title>
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
+     </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
      </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c

Documentation/DocBook/uio-howto.tmpl

@@ -41,6 +41,13 @@ GPL version 2.
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.8</revnumber>
+	<date>2008-12-24</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added name attributes in mem and portio sysfs directories.
+		</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.7</revnumber>
 	<date>2008-12-23</date>
@@ -303,10 +310,17 @@ interested in translating it, please email me
 	appear if the size of the mapping is not 0.
 </para>
 <para>
-	Each <filename>mapX/</filename> directory contains two read-only files
+	Each <filename>mapX/</filename> directory contains four read-only files
-	that show start address and size of the memory:
+	that show attributes of the memory:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this mapping. This
+	is optional, the string can be empty. Drivers can set this to make it
+	easier for userspace to find the correct mapping.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>addr</filename>: The address of memory that can be mapped.
@@ -366,10 +380,17 @@ offset = N * getpagesize();
 	<filename>/sys/class/uio/uioX/portio/</filename>.
 </para>
 <para>
-	Each <filename>portX/</filename> directory contains three read-only
+	Each <filename>portX/</filename> directory contains four read-only
-	files that show start, size, and type of the port region:
+	files that show name, start, size, and type of the port region:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this port region.
+	The string is optional and can be empty. Drivers can set it to make it
+	easier for userspace to find a certain port region.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>start</filename>: The first port of this region.

Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+<?xml version="1.0" encoding="UTF-8"?>
-
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-<book>
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
-<?dbhtml filename="index.html">
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="Writing-an-ALSA-Driver">
   <bookinfo>
     <title>Writing an ALSA Driver</title>
     <author>
@@ -492,9 +492,9 @@
           }
 
           /* (2) */
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
-          if (card == NULL)
+          if (err < 0)
-                  return -ENOMEM;
+                  return err;
 
           /* (3) */
           err = snd_mychip_create(card, pci, &chip);
@@ -590,8 +590,9 @@
             <programlisting>
 <![CDATA[
   struct snd_card *card;
+  int err;
   ....
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -809,26 +810,28 @@
 
       <para>
         As mentioned above, to create a card instance, call
-      <function>snd_card_new()</function>.
+      <function>snd_card_create()</function>.
 
         <informalexample>
           <programlisting>
 <![CDATA[
   struct snd_card *card;
-  card = snd_card_new(index, id, module, extra_size);
+  int err;
+  err = snd_card_create(index, id, module, extra_size, &card);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The function takes four arguments, the card-index number, the
+        The function takes five arguments, the card-index number, the
         id string, the module pointer (usually
         <constant>THIS_MODULE</constant>),
-        and the size of extra-data space.  The last argument is used to
+        the size of extra-data space, and the pointer to return the
+        card instance.  The extra_size argument is used to
         allocate card-&gt;private_data for the
         chip-specific data.  Note that these data
-        are allocated by <function>snd_card_new()</function>.
+        are allocated by <function>snd_card_create()</function>.
       </para>
     </section>
 
@@ -915,15 +918,16 @@
       </para>
 
       <section id="card-management-chip-specific-snd-card-new">
-        <title>1. Allocating via <function>snd_card_new()</function>.</title>
+        <title>1. Allocating via <function>snd_card_create()</function>.</title>
         <para>
           As mentioned above, you can pass the extra-data-length
-	  to the 4th argument of <function>snd_card_new()</function>, i.e.
+	  to the 4th argument of <function>snd_card_create()</function>, i.e.
 
           <informalexample>
             <programlisting>
 <![CDATA[
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                        sizeof(struct mychip), &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -952,8 +956,8 @@
 
         <para>
           After allocating a card instance via
-          <function>snd_card_new()</function> (with
+          <function>snd_card_create()</function> (with
-          <constant>NULL</constant> on the 4th arg), call
+          <constant>0</constant> on the 4th arg), call
           <function>kzalloc()</function>. 
 
           <informalexample>
@@ -961,7 +965,7 @@
 <![CDATA[
   struct snd_card *card;
   struct mychip *chip;
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 ]]>
@@ -5750,8 +5754,9 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
           ....
           chip = kzalloc(sizeof(*chip), GFP_KERNEL);
           ....
@@ -5763,7 +5768,7 @@ struct _snd_pcm_runtime {
       </informalexample>
 
 	When you created the chip data with
-	<function>snd_card_new()</function>, it's anyway accessible
+	<function>snd_card_create()</function>, it's anyway accessible
 	via <structfield>private_data</structfield> field.
 
       <informalexample>
@@ -5775,9 +5780,10 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE,
-                              sizeof(struct mychip));
+                                sizeof(struct mychip), &card);
           ....
           chip = card->private_data;
           ....

Documentation/RCU/checklist.txt

@@ -298,3 +298,15 @@ over a rather long period of time, but improvements are always welcome!
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.

Documentation/cpu-freq/governors.txt

@@ -117,10 +117,28 @@ accessible parameters:
 sampling_rate: measured in uS (10^-6 seconds), this is how often you
 want the kernel to look at the CPU usage and to make decisions on
 what to do about the frequency.  Typically this is set to values of
-around '10000' or more.
+around '10000' or more. It's default value is (cmp. with users-guide.txt):
+transition_latency * 1000
+The lowest value you can set is:
+transition_latency * 100 or it may get restricted to a value where it
+makes not sense for the kernel anymore to poll that often which depends
+on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
+Be aware that transition latency is in ns and sampling_rate is in us, so you
+get the same sysfs value by default.
+Sampling rate should always get adjusted considering the transition latency
+To set the sampling rate 750 times as high as the transition latency
+in the bash (as said, 1000 is default), do:
+echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
+    >ondemand/sampling_rate
 
-show_sampling_rate_(min|max): the minimum and maximum sampling rates
+show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
-available that you may set 'sampling_rate' to.
+You can use wider ranges now and the general
+cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
+used to obtain exactly the same info:
+show_sampling_rate_min = transtition_latency * 500    / 1000
+show_sampling_rate_max = transtition_latency * 500000 / 1000
+(divided by 1000 is to illustrate that sampling rate is in us and
+transition latency is exported ns).
 
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on

Documentation/cpu-freq/user-guide.txt

@@ -152,6 +152,18 @@ cpuinfo_min_freq :		this file shows the minimum operating
 				frequency the processor can run at(in kHz) 
 cpuinfo_max_freq :		this file shows the maximum operating
 				frequency the processor can run at(in kHz) 
+cpuinfo_transition_latency	The time it takes on this CPU to
+				switch between two frequencies in nano
+				seconds. If unknown or known to be
+				that high that the driver does not
+				work with the ondemand governor, -1
+				(CPUFREQ_ETERNAL) will be returned.
+				Using this information can be useful
+				to choose an appropriate polling
+				frequency for a kernel governor or
+				userspace daemon. Make sure to not
+				switch the frequency too often
+				resulting in performance loss.
 scaling_driver :		this file shows what cpufreq driver is
 				used to set the frequency on this CPU
 

Documentation/dynamic-debug-howto.txt

@@ -0,0 +1,240 @@
+
+Introduction
+============
+
+This document describes how to use the dynamic debug (ddebug) feature.
+
+Dynamic debug is designed to allow you to dynamically enable/disable kernel
+code to obtain additional kernel information. Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_debug() calls can be
+dynamically enabled per-callsite.
+
+Dynamic debug has even more useful features:
+
+ * Simple query language allows turning on and off debugging statements by
+   matching any combination of:
+
+   - source filename
+   - function name
+   - line number (including ranges of line numbers)
+   - module name
+   - format string
+
+ * Provides a debugfs control file: <debugfs>/dynamic_debug/control which can be
+   read to display the complete list of known debug statements, to help guide you
+
+Controlling dynamic debug Behaviour
+===============================
+
+The behaviour of pr_debug()/dev_debug()s are controlled via writing to a
+control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
+filesystem, in order to make use of this feature. Subsequently, we refer to the
+control file as: <debugfs>/dynamic_debug/control. For example, if you want to
+enable printing from source file 'svcsock.c', line 1603 you simply do:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+If you make a mistake with the syntax, the write will fail thus:
+
+nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
+				<debugfs>/dynamic_debug/control
+-bash: echo: write error: Invalid argument
+
+Viewing Dynamic Debug Behaviour
+===========================
+
+You can view the currently configured behaviour of all the debug statements
+via:
+
+nullarbor:~ # cat <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline       : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth         : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests     : %d\012"
+...
+
+
+You can also apply standard Unix text manipulation filters to this
+data, e.g.
+
+nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
+62
+
+nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
+42
+
+Note in particular that the third column shows the enabled behaviour
+flags for each debug statement callsite (see below for definitions of the
+flags).  The default value, no extra behaviour enabled, is "-".  So
+you can view all the debug statement callsites with any non-default flags:
+
+nullarbor:~ # awk '$3 != "-"' <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+
+
+Command Language Reference
+==========================
+
+At the lexical level, a command comprises a sequence of words separated
+by whitespace characters.  Note that newlines are treated as word
+separators and do *not* end a command or allow multiple commands to
+be done together.  So these are all equivalent:
+
+nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+Commands are bounded by a write() system call.  If you want to do
+multiple commands you need to do a separate "echo" for each, like:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
+> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+
+or even like:
+
+nullarbor:~ # (
+> echo 'file svcsock.c line 1603 +p' ;\
+> echo 'file svcsock.c line 1563 +p' ;\
+> ) > /proc/dprintk
+
+At the syntactical level, a command comprises a sequence of match
+specifications, followed by a flags change specification.
+
+command ::= match-spec* flags-spec
+
+The match-spec's are used to choose a subset of the known dprintk()
+callsites to which to apply the flags-spec.  Think of them as a query
+with implicit ANDs between each pair.  Note that an empty list of
+match-specs is possible, but is not very useful because it will not
+match any debug statement callsites.
+
+A match specification comprises a keyword, which controls the attribute
+of the callsite to be compared, and a value to compare against.  Possible
+keywords are:
+
+match-spec ::= 'func' string |
+	       'file' string |
+	       'module' string |
+	       'format' string |
+	       'line' line-range
+
+line-range ::= lineno |
+	       '-'lineno |
+	       lineno'-' |
+	       lineno'-'lineno
+// Note: line-range cannot contain space, e.g.
+// "1-30" is valid range but "1 - 30" is not.
+
+lineno ::= unsigned-int
+
+The meanings of each keyword are:
+
+func
+    The given string is compared against the function name
+    of each callsite.  Example:
+
+    func svc_tcp_accept
+
+file
+    The given string is compared against either the full
+    pathname or the basename of the source file of each
+    callsite.  Examples:
+
+    file svcsock.c
+    file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
+
+module
+    The given string is compared against the module name
+    of each callsite.  The module name is the string as
+    seen in "lsmod", i.e. without the directory or the .ko
+    suffix and with '-' changed to '_'.  Examples:
+
+    module sunrpc
+    module nfsd
+
+format
+    The given string is searched for in the dynamic debug format
+    string.  Note that the string does not need to match the
+    entire format, only some part.  Whitespace and other
+    special characters can be escaped using C octal character
+    escape \ooo notation, e.g. the space character is \040.
+    Alternatively, the string can be enclosed in double quote
+    characters (") or single quote characters (').
+    Examples:
+
+    format svcrdma:	    // many of the NFS/RDMA server dprintks
+    format readahead	    // some dprintks in the readahead cache
+    format nfsd:\040SETATTR // one way to match a format with whitespace
+    format "nfsd: SETATTR"  // a neater way to match a format with whitespace
+    format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
+
+line
+    The given line number or range of line numbers is compared
+    against the line number of each dprintk() callsite.  A single
+    line number matches the callsite line number exactly.  A
+    range of line numbers matches any callsite between the first
+    and last line number inclusive.  An empty first number means
+    the first line in the file, an empty line number means the
+    last number in the file.  Examples:
+
+    line 1603	    // exactly line 1603
+    line 1600-1605  // the six lines from line 1600 to line 1605
+    line -1605	    // the 1605 lines from line 1 to line 1605
+    line 1600-	    // all lines from line 1600 to the end of the file
+
+The flags specification comprises a change operation followed
+by one or more flag characters.  The change operation is one
+of the characters:
+
+-
+    remove the given flags
+
++
+    add the given flags
+
+=
+    set the flags to the given flags
+
+The flags are:
+
+p
+    Causes a printk() message to be emitted to dmesg
+
+Note the regexp ^[-+=][scp]+$ matches a flags specification.
+Note also that there is no convenient syntax to remove all
+the flags at once, you need to use "-psc".
+
+Examples
+========
+
+// enable the message at line 1603 of file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in the NFS server module
+nullarbor:~ # echo -n 'module nfsd +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process +p' >
+				<debugfs>/dynamic_debug/control
+
+// disable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process -p' >
+				<debugfs>/dynamic_debug/control
+
+// enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
+nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
+				<debugfs>/dynamic_debug/control

Documentation/feature-removal-schedule.txt

@@ -337,3 +337,12 @@ Why:	In 2.6.18 the Secmark concept was introduced to replace the "compat_net"
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>

Documentation/filesystems/ext2.txt

@@ -373,10 +373,11 @@ Filesystem Resizing	http://ext2resize.sourceforge.net/
 Compression (*)		http://e2compr.sourceforge.net/
 
 Implementations for:
-Windows 95/98/NT/2000	http://uranus.it.swin.edu.au/~jn/linux/Explore2fs.htm
+Windows 95/98/NT/2000	http://www.chrysocome.net/explore2fs
-Windows 95 (*)		http://www.yipton.demon.co.uk/content.html#FSDEXT2
+Windows 95 (*)		http://www.yipton.net/content.html#FSDEXT2
 DOS client (*)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-OS/2			http://perso.wanadoo.fr/matthieu.willm/ext2-os2/
+OS/2 (+)		ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/
-RISC OS client		ftp://ftp.barnet.ac.uk/pub/acorn/armlinux/iscafs/
+RISC OS client		http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/
 
 (*) no longer actively developed/supported (as of Apr 2001)
+(+) no longer actively developed/supported (as of Mar 2009)

Documentation/filesystems/ext3.txt

@@ -198,5 +198,5 @@ kernel source:	<file:fs/ext3/>
 programs: 	http://e2fsprogs.sourceforge.net/
 		http://ext2resize.sourceforge.net
 
-useful links:	http://www-106.ibm.com/developerworks/linux/library/l-fs7/
+useful links:	http://www.ibm.com/developerworks/library/l-fs7.html
-		http://www-106.ibm.com/developerworks/linux/library/l-fs8/
+		http://www.ibm.com/developerworks/library/l-fs8.html

Documentation/filesystems/squashfs.txt

@@ -22,7 +22,7 @@ Squashfs filesystem features versus Cramfs:
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited

Documentation/hwmon/lm90

@@ -42,6 +42,11 @@ Supported chips:
     Addresses scanned: I2C 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497
+  * Maxim MAX6648
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
   * Maxim MAX6649
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4c
@@ -74,6 +79,11 @@ Supported chips:
                            0x4c, 0x4d and 0x4e
     Datasheet: Publicly available at the Maxim website
                http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370
+  * Maxim MAX6692
+    Prefix: 'max6646'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the Maxim website
+               http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
 
 
 Author: Jean Delvare <khali@linux-fr.org>

Documentation/kernel-parameters.txt

@@ -44,6 +44,7 @@ parameter is applicable:
 	FB	The frame buffer device is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
+	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
@@ -902,6 +903,15 @@ and is between 256 and 4096 characters. It is defined in the file
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
+	ima_audit=	[IMA]
+			Format: { "0" | "1" }
+			0 -- integrity auditing messages. (Default)
+			1 -- enable informational integrity auditing messages.
+
+	ima_hash=	[IMA]
+			Formt: { "sha1" | "md5" }
+			default: "sha1"
+
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 
@@ -1816,11 +1826,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to

Documentation/logo.txt

@@ -1,13 +1,4 @@
-This is the full-colour version of the currently unofficial Linux logo
+Tux is taking a three month sabbatical to work as a barber, so Tuz is
-("currently unofficial" just means that there has been no paperwork and
+standing in.  He's taken pains to ensure you'll hardly notice.
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	http://www.isc.tamu.edu/~lewing/linux/
 
+Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq	- IRQ # for CMI8330 chip (SB16)
     sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
     sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
+    fmport	- (optional) OPL3 I/O port
+    mpuport	- (optional) MPU401 I/O port
+    mpuirq	- (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -388,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port	- port # for CS4232 chip (PnP setup - 0x534)
-    cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port	- FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq		- IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
-    dma1	- first DMA # for CS4232 chip (0,1,3)
-    dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -437,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------
 
@@ -606,6 +589,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    fm_port	- port # for OPL3 (option; share the same port as default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
@@ -757,6 +741,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+    		  When the bit 8 (0x100) is set, the lower 8 bits are used
+		  as the "fixed" codec slots; i.e. the driver probes the
+		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
@@ -1185,6 +1172,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices and PnP.
     
+  Module snd-msnd-classic
+  -----------------------
+
+    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
+    soundcards.
+
+    io		- Port # for msnd-classic card
+    irq		- IRQ # for msnd-classic card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+    digital	- Digital daughterboard present (default = 0)
+    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
+    reset	- Reset all devices
+    mpu_io	- MPU401 I/O port
+    mpu_irq	- MPU401 irq#
+    ide_io0	- IDE port #0
+    ide_io1	- IDE port #1
+    ide_irq	- IDE irq#
+    joystick_io	- Joystick I/O port
+
+    The driver requires firmware files "turtlebeach/msndinit.bin" and
+    "turtlebeach/msndperm.bin" in the proper firmware directory.
+
+    See Documentation/sound/oss/MultiSound for important information
+    about this driver.  Note that it has been discontinued, but the 
+    Voyetra Turtle Beach knowledge base entry for it is still available
+    at
+	http://www.turtlebeach.com/site/kb_ftp/790.asp
+
+  Module snd-msnd-pinnacle
+  ------------------------
+
+    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
+
+    io		- Port # for pinnacle/fiji card
+    irq		- IRQ # for pinnalce/fiji card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    The driver requires firmware files "turtlebeach/pndspini.bin" and
+    "turtlebeach/pndsperm.bin" in the proper firmware directory.
+
   Module snd-mtpav
   ----------------
 
@@ -1824,7 +1859,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
 
     This module supports autoprobe and multiple cards.
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -56,6 +56,7 @@ ALC262
   sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
+  tyan		Tyan Thunder n6650W (S2915-E)
   ultra		Samsung Q1 Ultra Vista model
   lenovo-3000	Lenovo 3000 y410
   nec		NEC Versa S9100
@@ -261,6 +262,8 @@ Conexant 5051
 =============
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
+  hp-dv6736	HP dv6736
+  lenovo-x200	Lenovo X200 laptop
 
 STAC9200
 ========
@@ -278,6 +281,7 @@ STAC9200
   gateway-m4	Gateway laptops with EAPD control
   gateway-m4-2	Gateway laptops with EAPD control
   panasonic	Panasonic CF-74
+  auto		BIOS setup (default)
 
 STAC9205/9254
 =============
@@ -285,6 +289,8 @@ STAC9205/9254
   dell-m42	Dell (unknown)
   dell-m43	Dell Precision
   dell-m44	Dell Inspiron
+  eapd		Keep EAPD on (e.g. Gateway T1616)
+  auto		BIOS setup (default)
 
 STAC9220/9221
 =============
@@ -308,6 +314,7 @@ STAC9220/9221
   dell-d82	Dell (unknown)
   dell-m81	Dell (unknown)
   dell-m82	Dell XPS M1210
+  auto		BIOS setup (default)
 
 STAC9202/9250/9251
 ==================
@@ -319,6 +326,7 @@ STAC9202/9250/9251
   m3		Some Gateway MX series laptops
   m5		Some Gateway MX series laptops (MP6954)
   m6		Some Gateway NX series laptops
+  auto		BIOS setup (default)
 
 STAC9227/9228/9229/927x
 =======================
@@ -328,6 +336,7 @@ STAC9227/9228/9229/927x
   5stack	D965 5stack + SPDIF
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  auto		BIOS setup (default)
 
 STAC92HD71B*
 ============
@@ -335,7 +344,10 @@ STAC92HD71B*
   dell-m4-1	Dell desktops
   dell-m4-2	Dell desktops
   dell-m4-3	Dell desktops
-  hp-m4		HP dv laptops
+  hp-m4		HP mini 1000
+  hp-dv5	HP dv series
+  hp-hdx	HP HDX series
+  auto		BIOS setup (default)
 
 STAC92HD73*
 ===========
@@ -345,13 +357,16 @@ STAC92HD73*
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  auto		BIOS setup (default)
 
 STAC92HD83*
 ===========
   ref		Reference board
   mic-ref	Reference board with power managment for ports
+  dell-s14	Dell laptop
+  auto		BIOS setup (default)
 
 STAC9872
 ========
-  vaio		Setup for VAIO FE550G/SZ110
+  vaio		VAIO laptop without SPDIF
-  vaio-ar Setup for VAIO AR
+  auto		BIOS setup (default)

Documentation/sound/alsa/HD-Audio.txt

@@ -109,6 +109,13 @@ slot, pass `probe_mask=1`.  For the first and the third slots, pass
 Since 2.6.29 kernel, the driver has a more robust probing method, so
 this error might happen rarely, though.
 
+On a machine with a broken BIOS, sometimes you need to force the
+driver to probe the codec slots the hardware doesn't report for use.
+In such a case, turn the bit 8 (0x100) of `probe_mask` option on.
+Then the rest 8 bits are passed as the codec slots to probe
+unconditionally.  For example, `probe_mask=0x103` will force to probe
+the codec slots 0 and 1 no matter what the hardware reports.
+
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
@@ -358,10 +365,26 @@ modelname::
   to this file.
 init_verbs::
   The extra verbs to execute at initialization.  You can add a verb by
-  writing to this file.  Pass tree numbers, nid, verb and parameter.
+  writing to this file.  Pass three numbers: nid, verb and parameter
+  (separated with a space).
 hints::
-  Shows hint strings for codec parsers for any use.  Right now it's
+  Shows / stores hint strings for codec parsers for any use.
-  not used.
+  Its format is `key = value`.  For example, passing `hp_detect = yes`
+  to IDT/STAC codec parser will result in the disablement of the
+  headphone detection.
+init_pin_configs::
+  Shows the initial pin default config values set by BIOS.
+driver_pin_configs::
+  Shows the pin default values set by the codec parser explicitly.
+  This doesn't show all pin values but only the changed values by
+  the parser.  That is, if the parser doesn't change the pin default
+  config values by itself, this will contain nothing.
+user_pin_configs::
+  Shows the pin default config values to override the BIOS setup.
+  Writing this (with two numbers, NID and value) appends the new
+  value.  The given will be used instead of the initial BIOS value at
+  the next reconfiguration time.  Note that this config will override
+  even the driver pin configs, too.
 reconfig::
   Triggers the codec re-configuration.  When any value is written to
   this file, the driver re-initialize and parses the codec tree
@@ -371,6 +394,14 @@ clear::
   Resets the codec, removes the mixer elements and PCM stuff of the
   specified codec, and clear all init verbs and hints.
 
+For example, when you want to change the pin default configuration
+value of the pin widget 0x14 to 0x9993013f, and let the driver
+re-configure based on that state, run like below:
+------------------------------------------------------------------------
+  # echo 0x14 0x9993013f > /sys/class/sound/hwC0D0/user_pin_configs
+  # echo 1 > /sys/class/sound/hwC0D0/reconfig  
+------------------------------------------------------------------------
+
 
 Power-Saving
 ~~~~~~~~~~~~
@@ -461,6 +492,16 @@ run with `--no-upload` option, and attach the generated file.
 There are some other useful options.  See `--help` option output for
 details.
 
+When a probe error occurs or when the driver obviously assigns a
+mismatched model, it'd be helpful to load the driver with
+`probe_only=1` option (at best after the cold reboot) and run
+alsa-info at this state.  With this option, the driver won't configure
+the mixer and PCM but just tries to probe the codec slot.  After
+probing, the proc file is available, so you can get the raw codec
+information before modified by the driver.  Of course, the driver
+isn't usable with `probe_only=1`.  But you can continue the
+configuration via hwdep sysfs file if hda-reconfig option is enabled.
+
 
 hda-verb
 ~~~~~~~~

Documentation/sound/alsa/soc/dapm.txt

@@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------

Documentation/sound/oss/CS4232

@@ -1,23 +0,0 @@
-To configure the Crystal CS423x sound chip and activate its DSP functions,
-modules may be loaded in this order:
-  
-	modprobe sound
-	insmod ad1848
-	insmod uart401
-	insmod cs4232 io=* irq=* dma=* dma2=*
-  
-This is the meaning of the parameters:
-  
-	io--I/O address of the Windows Sound System (normally 0x534)
-	irq--IRQ of this device
-	dma and dma2--DMA channels (DMA2 may be 0)
-  
-On some cards, the board attempts to do non-PnP setup, and fails.  If you
-have problems, use Linux' PnP facilities. 
-  
-To get MIDI facilities add
-  
-	insmod opl3 io=*
-  
-where "io" is the I/O address of the OPL3 synthesizer. This will be shown
-in /proc/sys/pnp and is normally 0x388.

Documentation/sound/oss/Introduction

@@ -80,7 +80,7 @@ Notes:
     additional features.
 
 2.  The commercial OSS driver may be obtained from the site:
-    http://www/opensound.com.  This may be used for cards that
+    http://www.opensound.com.  This may be used for cards that
     are unsupported by the kernel driver, or may be used
     by other operating systems.  
 

Documentation/usb/usbmon.txt

@@ -229,16 +229,26 @@ struct usbmon_packet {
 	int status;		/* 28: */
 	unsigned int length;	/* 32: Length of data (submitted or actual) */
 	unsigned int len_cap;	/* 36: Delivered length */
-	unsigned char setup[8];	/* 40: Only for Control 'S' */
+	union {			/* 40: */
-};				/* 48 bytes total */
+		unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+		struct iso_rec {		/* Only for ISO */
+			int error_count;
+			int numdesc;
+		} iso;
+	} s;
+	int interval;		/* 48: Only for Interrupt and ISO */
+	int start_frame;	/* 52: For ISO */
+	unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */
+	unsigned int ndesc;	/* 60: Actual number of ISO descriptors */
+};				/* 64 total length */
 
 These events can be received from a character device by reading with read(2),
-with an ioctl(2), or by accessing the buffer with mmap.
+with an ioctl(2), or by accessing the buffer with mmap. However, read(2)
+only returns first 48 bytes for compatibility reasons.
 
 The character device is usually called /dev/usbmonN, where N is the USB bus
 number. Number zero (/dev/usbmon0) is special and means "all buses".
-However, this feature is not implemented yet. Note that specific naming
+Note that specific naming policy is set by your Linux distribution.
-policy is set by your Linux distribution.
 
 If you create /dev/usbmon0 by hand, make sure that it is owned by root
 and has mode 0600. Otherwise, unpriviledged users will be able to snoop
@@ -279,9 +289,10 @@ size is out of [unspecified] bounds for this kernel, the call fails with
 This call returns the current size of the buffer in bytes.
 
  MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg)
+ MON_IOCX_GETX, defined as _IOW(MON_IOC_MAGIC, 10, struct mon_get_arg)
 
-This call waits for events to arrive if none were in the kernel buffer,
+These calls wait for events to arrive if none were in the kernel buffer,
-then returns the first event. Its argument is a pointer to the following
+then return the first event. The argument is a pointer to the following
 structure:
 
 struct mon_get_arg {
@@ -294,6 +305,8 @@ Before the call, hdr, data, and alloc should be filled. Upon return, the area
 pointed by hdr contains the next event structure, and the data buffer contains
 the data, if any. The event is removed from the kernel buffer.
 
+The MON_IOCX_GET copies 48 bytes, MON_IOCX_GETX copies 64 bytes.
+
  MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg)
 
 This ioctl is primarily used when the application accesses the buffer

MAINTAINERS

@@ -1271,6 +1271,12 @@ L:	linux-crypto@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:	Maintained
 
+CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
+P:	Neil Horman
+M:	nhorman@tuxdriver.com
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+
 CS5535 Audio ALSA driver
 P:	Jaya Kumar
 M:	jayakumar.alsa@gmail.com
@@ -1471,8 +1477,6 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported
 
 DOCUMENTATION (/Documentation directory)
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
 P:	Randy Dunlap
 M:	rdunlap@xenotime.net
 L:	linux-doc@vger.kernel.org
@@ -2220,6 +2224,11 @@ M:	stefanr@s5r6.in-berlin.de
 L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 
+INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
+P:	Mimi Zohar
+M:	zohar@us.ibm.com
+S:	Supported
+
 IMS TWINTURBO FRAMEBUFFER DRIVER
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Orphan
@@ -2881,7 +2890,7 @@ P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
-S:	Supported
+S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@@ -3354,10 +3363,8 @@ S:	Maintained
 PARISC ARCHITECTURE
 P:	Kyle McMartin
 M:	kyle@mcmartin.ca
-P:	Matthew Wilcox
+P:	Helge Deller
-M:	matthew@wil.cx
+M:	deller@gmx.de
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -3856,6 +3863,7 @@ M:	jmorris@namei.org
 L:	linux-kernel@vger.kernel.org
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+W:	http://security.wiki.kernel.org/
 S:	Supported
 
 SECURITY CONTACT
@@ -4297,6 +4305,19 @@ L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
 
+TOMOYO SECURITY MODULE
+P:	Kentaro Takeda
+M:	takedakn@nttdata.co.jp
+P:	Tetsuo Handa
+M:	penguin-kernel@I-love.SAKURA.ne.jp
+L:	linux-kernel@vger.kernel.org (kernel issues)
+L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
+L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
+L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
+W:	http://tomoyo.sourceforge.jp/
+T:	quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/
+S:	Maintained
+
 TOSHIBA ACPI EXTRAS DRIVER
 P:	John Belmonte
 M:	toshiba_acpi@memebeam.org

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 29
-EXTRAVERSION = -rc7
+EXTRAVERSION =
-NAME = Erotic Pickled Herring
+NAME = Temporary Tasmanian Devil
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -566,6 +566,12 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 # disable pointer signed / unsigned warnings in gcc 4.0
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
+# disable invalid "can't wrap" optimzations for signed / pointers
+KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
 # But warn user when we do so
 warn-assign = \
@@ -904,12 +910,18 @@ localver = $(subst $(space),, $(string) \
 # and if the SCM is know a tag from the SCM is appended.
 # The appended tag is determined by the SCM used.
 #
-# Currently, only git is supported.
+# .scmversion is used when generating rpm packages so we do not loose
-# Other SCMs can edit scripts/setlocalversion and add the appropriate
+# the version information from the SCM when we do the build of the kernel
-# checks as needed.
+# from the copied source
 ifdef CONFIG_LOCALVERSION_AUTO
+
+ifeq ($(wildcard .scmversion),)
         _localver-auto = $(shell $(CONFIG_SHELL) \
                          $(srctree)/scripts/setlocalversion $(srctree))
+else
+        _localver-auto = $(shell cat .scmversion 2> /dev/null)
+endif
+
 	localver-auto  = $(LOCALVERSION)$(_localver-auto)
 endif
 
@@ -1537,7 +1549,7 @@ quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
       cmd_depmod = \
 	if [ -r System.map -a -x $(DEPMOD) ]; then                              \
 		$(DEPMOD) -ae -F System.map                                     \
-		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) -r)   \
+		$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) )     \
 		$(KERNELRELEASE);                                               \
 	fi
 

arch/arm/kernel/entry-common.S

@@ -111,6 +111,7 @@ ENTRY(mcount)
 	.globl mcount_call
 mcount_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 ENTRY(ftrace_caller)
@@ -122,6 +123,7 @@ ENTRY(ftrace_caller)
 	.globl ftrace_call
 ftrace_call:
 	bl ftrace_stub
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #else
@@ -133,6 +135,7 @@ ENTRY(mcount)
 	adr r0, ftrace_stub
 	cmp r0, r2
 	bne trace
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 trace:
@@ -141,6 +144,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
+	mov lr, r1				@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/arm/kernel/fiq.c

@@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length)
  * disable irqs for the duration.  Note - these functions are almost
  * entirely coded in assembly.
  */
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (
@@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
 	: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
 }
 
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
 {
 	register unsigned long tmp;
 	asm volatile (

arch/arm/mach-at91/at91sam9263_devices.c

@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia

arch/arm/mach-at91/include/mach/board.h

@@ -56,6 +56,9 @@ struct at91_cf_data {
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,8 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_board_info;
+
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];

arch/arm/mach-mx1/devices.c

@@ -23,6 +23,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
 static struct resource imx_csi_resources[] = {

arch/arm/mach-mx1/mx1ads.c

@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void)
 #ifdef CONFIG_I2C2_OMAP_BEAGLE
 	omap_register_i2c_bus(2, 400, NULL, 0);
 #endif
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 

arch/arm/mach-orion5x/common.c

@@ -434,6 +434,10 @@ void __init orion5x_uart1_init(void)
 /*****************************************************************************
  * XOR engine
  ****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
 static struct resource orion5x_xor_shared_resources[] = {
 	{
 		.name	= "xor low",
@@ -451,6 +455,9 @@ static struct resource orion5x_xor_shared_resources[] = {
 static struct platform_device orion5x_xor_shared = {
 	.name		= MV_XOR_SHARED_NAME,
 	.id		= 0,
+	.dev		= {
+		.platform_data	= &orion5x_xor_shared_data,
+	},
 	.num_resources	= ARRAY_SIZE(orion5x_xor_shared_resources),
 	.resource	= orion5x_xor_shared_resources,
 };

arch/arm/mach-pxa/e740.c

@@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/e750.c

@@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/h5000.c

@@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = {
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
 };
 
 /*

arch/arm/mach-pxa/include/mach/eseries-gpio.h

@@ -45,6 +45,21 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2  16
+#define GPIO_E740_MIC_ON         40
+#define GPIO_E740_AMP_ON         41
+
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF      4
+#define GPIO_E750_SPK_AMP_OFF     7
+#define GPIO_E750_HP_DETECT      37
+
+/* e800 audio control GPIOs */
+#define GPIO_E800_HP_DETECT      81
+#define GPIO_E800_HP_AMP_OFF     82
+#define GPIO_E800_SPK_AMP_ON     83
+
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19

arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -50,7 +50,7 @@
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
@@ -109,6 +109,11 @@
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
+#if defined(CONFIG_PXA3xx)
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#endif
+
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */

arch/arm/mach-pxa/spitz.c

@@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO57_nIOIS16,
 	GPIO104_PSKTSEL,
 
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,

arch/arm/mach-s3c2410/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {

arch/arm/mach-s3c2410/usb-simtec.c

@@ -29,13 +29,14 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/usb-control.h>
 #include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/usb-control.h>
 #include <plat/devs.h>
+
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec

arch/arm/mach-s3c2412/dma.c

@@ -29,8 +29,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
+#include <plat/regs-s3c2412-iis.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }

arch/arm/mach-s3c2440/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {

arch/arm/mach-s3c2443/dma.c

@@ -29,7 +29,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \

arch/arm/mach-s3c6410/mach-smdk6410.c

@@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
 #ifdef CONFIG_SMDK6410_SD_CH0
@@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 
 static struct i2c_board_info i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("WM8580", 0X1b), },
+	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };
 
 static struct i2c_board_info i2c_devs1[] __initdata = {

arch/arm/mm/copypage-feroceon.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 
-static void __attribute__((naked))
+static void __naked
 feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v3.c

@@ -15,7 +15,7 @@
  *
  * FIXME: do we need to handle cache stuff...
  */
-static void __attribute__((naked))
+static void __naked
 v3_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\n\

arch/arm/mm/copypage-v4mc.c

@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	asm volatile(

arch/arm/mm/copypage-v4wb.c

@@ -22,7 +22,7 @@
  * instruction.  If your processor does not supply this, you have to write your
  * own copy_user_highpage that does the right thing.
  */
-static void __attribute__((naked))
+static void __naked
 v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-v4wt.c

@@ -20,7 +20,7 @@
  * dirty data in the cache.  However, we do have to ensure that
  * subsequent reads are up to date.
  */
-static void __attribute__((naked))
+static void __naked
 v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xsc3.c

@@ -29,7 +29,7 @@
  * if we eventually end up using our copied page.
  *
  */
-static void __attribute__((naked))
+static void __naked
 xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\

arch/arm/mm/copypage-xscale.c

@@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock);
  * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
  * and merged as appropriate.
  */
-static void __attribute__((naked))
+static void __naked
 mc_copy_user_page(void *from, void *to)
 {
 	/*

arch/arm/mm/dma-mapping.c

@@ -490,26 +490,30 @@ core_initcall(consistent_init);
  */
 void dma_cache_maint(const void *start, size_t size, int direction)
 {
-	const void *end = start + size;
+	void (*inner_op)(const void *, const void *);
+	void (*outer_op)(unsigned long, unsigned long);
 
-	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+	BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
 
 	switch (direction) {
 	case DMA_FROM_DEVICE:		/* invalidate only */
-		dmac_inv_range(start, end);
+		inner_op = dmac_inv_range;
-		outer_inv_range(__pa(start), __pa(end));
+		outer_op = outer_inv_range;
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
-		dmac_clean_range(start, end);
+		inner_op = dmac_clean_range;
-		outer_clean_range(__pa(start), __pa(end));
+		outer_op = outer_clean_range;
 		break;
 	case DMA_BIDIRECTIONAL:		/* writeback and invalidate */
-		dmac_flush_range(start, end);
+		inner_op = dmac_flush_range;
-		outer_flush_range(__pa(start), __pa(end));
+		outer_op = outer_flush_range;
 		break;
 	default:
 		BUG();
 	}
+
+	inner_op(start, start + size);
+	outer_op(__pa(start), __pa(start) + size);
 }
 EXPORT_SYMBOL(dma_cache_maint);
 

arch/arm/mm/init.c

@@ -382,7 +382,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va(memend_pfn << PAGE_SHIFT);
+	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any

arch/arm/mm/mmap.c

@@ -124,7 +124,7 @@ int valid_phys_addr_range(unsigned long addr, size_t size)
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size > __pa(high_memory))
+	if (addr + size >= __pa(high_memory - 1))
 		return 0;
 
 	return 1;

arch/arm/plat-omap/Makefile

@@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
 
 # OMAP mailbox framework
 obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o

arch/arm/plat-omap/common.c

@@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
 /*
  * Returns current time from boot in nsecs. It's OK for this to wrap
  * around for now, as it's just a relative time stamp.
  */
 unsigned long long sched_clock(void)
 {
-	return omap_32k_ticks_to_nsecs(omap_32k_read());
+	unsigned long long ret;
+
+	ret = (unsigned long long)omap_32k_read();
+	ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+	return ret;
 }
 
 static int __init omap_init_clocksource_32k(void)

arch/arm/plat-omap/include/mach/common.h

@@ -35,7 +35,7 @@ extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 extern void omap_serial_init(void);
 extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
 				 struct i2c_board_info const *info,
 				 unsigned len);

arch/arm/plat-omap/include/mach/pm.h

@@ -108,7 +108,7 @@
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX) && \
 	!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
 #endif
 
 #ifndef __ASSEMBLER__

arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h

@@ -33,6 +33,9 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
+#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
+
 #define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
 #define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
 #define S3C2412_IISMOD_SLAVE		(2 << 10)
@@ -44,8 +47,8 @@
 #define S3C2412_IISMOD_LR_LLOW		(0 << 7)
 #define S3C2412_IISMOD_LR_RLOW		(1 << 7)
 #define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
 #define S3C2412_IISMOD_SDF_MASK		(3 << 5)
 #define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
 #define S3C2412_IISMOD_RCLK_512FS	(1 << 3)

arch/arm/plat-s3c/include/plat/usb-control.h

@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+/* arch/arm/plat-s3c/include/plat/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - usb port information
+ * S3C - USB host port information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+#define __ASM_ARCH_USBCONTROL_H
 
 #define S3C_HCDFLG_USED	(1)
 

arch/arm/plat-s3c64xx/clock.c

@@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = {
 	&clk_48m,
 };
 
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
 {
 	struct clk *clkp;
 	int ret;

arch/arm/plat-s3c64xx/gpiolib.c

@@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);

arch/arm/plat-s3c64xx/include/plat/irqs.h

@@ -117,7 +117,7 @@
 #define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
 #define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
 #define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST		S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
 #define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
 #define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
 #define IRQ_IIC			S3C64XX_IRQ_VIC1(18)

arch/arm/plat-s3c64xx/irq-eint.c

@@ -14,12 +14,15 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
 #include <asm/hardware/vic.h>
 
 #include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
 
 #include <mach/map.h>
 #include <plat/cpu.h>
@@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
+	int pin;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 	ctrl |= newvalue << shift;
 	__raw_writel(ctrl, reg);
 
+	/* set the GPIO pin appropriately */
+
+	if (offs < 23)
+		pin = S3C64XX_GPN(offs);
+	else
+		pin = S3C64XX_GPM(offs - 23);
+
+	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
 	return 0;
 }
 
@@ -181,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc)
 	s3c_irq_demux_eint(20, 27);
 }
 
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
 {
 	int irq;
 

arch/arm/plat-s3c64xx/irq.c

@@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = {
 
 static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
 {
-	void *reg_base = uirq->regs;
+	void __iomem *reg_base = uirq->regs;
 	unsigned int irq;
 	int offs;
 

arch/arm/plat-s3c64xx/s3c6400-clock.c

@@ -36,7 +36,7 @@
  * ext_xtal_mux for want of an actual name from the manual.
 */
 
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
 	.name		= "ext_xtal",
 	.id		= -1,
 };
@@ -63,7 +63,7 @@ struct clksrc_clk {
 	void __iomem		*reg_divider;
 };
 
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
 };
@@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
 };
 
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
 		.id		= -1,
@@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = {
 	.sources	= &clk_src_apll,
 };
 
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
 };
@@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
 };
 
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 		.id		= -1,
@@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = {
 	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
 };
 
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 		.id		= -1,
@@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
 	return rate;
 }
 
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
 	.name		= "dout_mpll",
 	.id		= -1,
 	.parent		= &clk_mout_mpll.clk,
@@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = {
 };
 
 static struct clk *clkset_uhost_list[] = {
+	&clk_48m,
 	&clk_mout_epll.clk,
 	&clk_dout_mpll,
 	&clk_fin_epll,
-	&clk_48m,
 };
 
 static struct clk_sources clkset_uhost = {
@@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 
 	rate = clk_round_rate(clk, rate);
 	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~sclk->mask;
+	val &= ~(0xf << sclk->shift);
-	val |= (rate - 1) << sclk->shift;
+	val |= (div - 1) << sclk->shift;
 	__raw_writel(val, reg);
 
 	return 0;
@@ -351,7 +353,7 @@ static struct clksrc_clk clk_mmc2 = {
 
 static struct clksrc_clk clk_usbhost = {
 	.clk	= {
-		.name		= "usb-host-bus",
+		.name		= "usb-bus-host",
 		.id		= -1,
 		.ctrlbit        = S3C_CLKCON_SCLK_UHOST,
 		.enable		= s3c64xx_sclk_ctrl,

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1811,7 +1811,7 @@ pilz_pmi5		MACH_PILZ_PMI5		PILZ_PMI5		1820
 jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc3			MACH_GPRISC3		GPRISC3			1823
-stamp9260		MACH_STAMP9260		STAMP9260		1824
+stamp9g20		MACH_STAMP9G20		STAMP9G20		1824
 smdk6430		MACH_SMDK6430		SMDK6430		1825
 smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
@@ -1993,4 +1993,134 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htcvenus		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
+hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
+sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
+dack_sda_01		MACH_DACK_SDA_01	DACK_SDA_01		2010
+armbox			MACH_ARMBOX		ARMBOX			2011
+harris_rvp		MACH_HARRIS_RVP		HARRIS_RVP		2012
+ribaldo			MACH_RIBALDO		RIBALDO			2013
+agora			MACH_AGORA		AGORA			2014
+omap3_mini		MACH_OMAP3_MINI		OMAP3_MINI		2015
+a9sam6432_b		MACH_A9SAM6432_B	A9SAM6432_B		2016
+usg2410			MACH_USG2410		USG2410			2017
+pc72052_i10_revb	MACH_PC72052_I10_REVB	PC72052_I10_REVB	2018
+mx35_exm32		MACH_MX35_EXM32		MX35_EXM32		2019
+topas910		MACH_TOPAS910		TOPAS910		2020
+hyena			MACH_HYENA		HYENA			2021
+pospax			MACH_POSPAX		POSPAX			2022
+hdl_gx			MACH_HDL_GX		HDL_GX			2023
+ctera_4bay		MACH_CTERA_4BAY		CTERA_4BAY		2024
+ctera_plug_c		MACH_CTERA_PLUG_C	CTERA_PLUG_C		2025
+crwea_plug_i		MACH_CRWEA_PLUG_I	CRWEA_PLUG_I		2026
+egauge2			MACH_EGAUGE2		EGAUGE2			2027
+didj			MACH_DIDJ		DIDJ			2028
+m_s3c2443		MACH_MEISTER		MEISTER			2029
+htcblackstone		MACH_HTCBLACKSTONE	HTCBLACKSTONE		2030
+cpuat9g20		MACH_CPUAT9G20		CPUAT9G20		2031
+smdk6440		MACH_SMDK6440		SMDK6440		2032
+omap_35xx_mvp		MACH_OMAP_35XX_MVP	OMAP_35XX_MVP		2033
+ctera_plug_i		MACH_CTERA_PLUG_I	CTERA_PLUG_I		2034
+pvg610_100		MACH_PVG610		PVG610			2035
+hprw6815		MACH_HPRW6815		HPRW6815		2036
+omap3_oswald		MACH_OMAP3_OSWALD	OMAP3_OSWALD		2037
+nas4220b		MACH_NAS4220B		NAS4220B		2038
+htcraphael_cdma		MACH_HTCRAPHAEL_CDMA	HTCRAPHAEL_CDMA		2039
+htcdiamond_cdma		MACH_HTCDIAMOND_CDMA	HTCDIAMOND_CDMA		2040
+scaler			MACH_SCALER		SCALER			2041
+zylonite2		MACH_ZYLONITE2		ZYLONITE2		2042
+aspenite		MACH_ASPENITE		ASPENITE		2043
+teton			MACH_TETON		TETON			2044
+ttc_dkb			MACH_TTC_DKB		TTC_DKB			2045
+bishop2			MACH_BISHOP2		BISHOP2			2046
+ippv5			MACH_IPPV5		IPPV5			2047
+farm926			MACH_FARM926		FARM926			2048
+mmccpu			MACH_MMCCPU		MMCCPU			2049
+sgmsfl			MACH_SGMSFL		SGMSFL			2050
+tt8000			MACH_TT8000		TT8000			2051
+zrn4300lp		MACH_ZRN4300LP		ZRN4300LP		2052
+mptc			MACH_MPTC		MPTC			2053
+h6051			MACH_H6051		H6051			2054
+pvg610_101		MACH_PVG610_101		PVG610_101		2055
+stamp9261_pc_evb	MACH_STAMP9261_PC_EVB	STAMP9261_PC_EVB	2056
+pelco_odysseus		MACH_PELCO_ODYSSEUS	PELCO_ODYSSEUS		2057
+tny_a9260		MACH_TNY_A9260		TNY_A9260		2058
+tny_a9g20		MACH_TNY_A9G20		TNY_A9G20		2059
+aesop_mp2530f		MACH_AESOP_MP2530F	AESOP_MP2530F		2060
+dx900			MACH_DX900		DX900			2061
+cpodc2			MACH_CPODC2		CPODC2			2062
+tilt_8925		MACH_TILT_8925		TILT_8925		2063
+davinci_dm357_evm	MACH_DAVINCI_DM357_EVM	DAVINCI_DM357_EVM	2064
+swordfish		MACH_SWORDFISH		SWORDFISH		2065
+corvus			MACH_CORVUS		CORVUS			2066
+taurus			MACH_TAURUS		TAURUS			2067
+axm			MACH_AXM		AXM			2068
+axc			MACH_AXC		AXC			2069
+baby			MACH_BABY		BABY			2070
+mp200			MACH_MP200		MP200			2071
+pcm043			MACH_PCM043		PCM043			2072
+hanlin_v3c		MACH_HANLIN_V3C		HANLIN_V3C		2073
+kbk9g20			MACH_KBK9G20		KBK9G20			2074
+adsturbog5		MACH_ADSTURBOG5		ADSTURBOG5		2075
+avenger_lite1		MACH_AVENGER_LITE1	AVENGER_LITE1		2076
+suc82x			MACH_SUC		SUC			2077
+at91sam7s256		MACH_AT91SAM7S256	AT91SAM7S256		2078
+mendoza			MACH_MENDOZA		MENDOZA			2079
+kira			MACH_KIRA		KIRA			2080
+mx1hbm			MACH_MX1HBM		MX1HBM			2081
+quatro43xx		MACH_QUATRO43XX		QUATRO43XX		2082
+quatro4230		MACH_QUATRO4230		QUATRO4230		2083
+nsb400			MACH_NSB400		NSB400			2084
+drp255			MACH_DRP255		DRP255			2085
+thoth			MACH_THOTH		THOTH			2086
+firestone		MACH_FIRESTONE		FIRESTONE		2087
+asusp750		MACH_ASUSP750		ASUSP750		2088
+ctera_dl		MACH_CTERA_DL		CTERA_DL		2089
+socr			MACH_SOCR		SOCR			2090
+htcoxygen		MACH_HTCOXYGEN		HTCOXYGEN		2091
+heroc			MACH_HEROC		HEROC			2092
+zeno6800		MACH_ZENO6800		ZENO6800		2093
+sc2mcs			MACH_SC2MCS		SC2MCS			2094
+gene100			MACH_GENE100		GENE100			2095
+as353x			MACH_AS353X		AS353X			2096
+sheevaplug		MACH_SHEEVAPLUG		SHEEVAPLUG		2097
+at91sam9g20		MACH_AT91SAM9G20	AT91SAM9G20		2098
+mv88f6192gtw_fe		MACH_MV88F6192GTW_FE	MV88F6192GTW_FE		2099
+cc9200			MACH_CC9200		CC9200			2100
+sm9200			MACH_SM9200		SM9200			2101
+tp9200			MACH_TP9200		TP9200			2102
+snapperdv		MACH_SNAPPERDV		SNAPPERDV		2103
+avengers_lite		MACH_AVENGERS_LITE	AVENGERS_LITE		2104
+avengers_lite1		MACH_AVENGERS_LITE1	AVENGERS_LITE1		2105
+omap3axon		MACH_OMAP3AXON		OMAP3AXON		2106
+ma8xx			MACH_MA8XX		MA8XX			2107
+mp201ek			MACH_MP201EK		MP201EK			2108
+davinci_tux		MACH_DAVINCI_TUX	DAVINCI_TUX		2109
+mpa1600			MACH_MPA1600		MPA1600			2110
+pelco_troy		MACH_PELCO_TROY		PELCO_TROY		2111
+nsb667			MACH_NSB667		NSB667			2112
+rovers5_4mpix		MACH_ROVERS5_4MPIX	ROVERS5_4MPIX		2113
+twocom			MACH_TWOCOM		TWOCOM			2114
+ubisys_p9_rcu3r2	MACH_UBISYS_P9_RCU3R2	UBISYS_P9_RCU3R2	2115
+hero_espresso		MACH_HERO_ESPRESSO	HERO_ESPRESSO		2116
+afeusb			MACH_AFEUSB		AFEUSB			2117
+t830			MACH_T830		T830			2118
+spd8020_cc		MACH_SPD8020_CC		SPD8020_CC		2119
+om_3d7k			MACH_OM_3D7K		OM_3D7K			2120
+picocom2		MACH_PICOCOM2		PICOCOM2		2121
+uwg4mx27		MACH_UWG4MX27		UWG4MX27		2122
+uwg4mx31		MACH_UWG4MX31		UWG4MX31		2123
+cherry			MACH_CHERRY		CHERRY			2124
+mx51_babbage		MACH_MX51_BABBAGE	MX51_BABBAGE		2125
+s3c2440turkiye		MACH_S3C2440TURKIYE	S3C2440TURKIYE		2126
+tx37			MACH_TX37		TX37			2127
+sbc2800_9g20		MACH_SBC2800_9G20	SBC2800_9G20		2128
+benzglb			MACH_BENZGLB		BENZGLB			2129
+benztd			MACH_BENZTD		BENZTD			2130
+cartesio_plus		MACH_CARTESIO_PLUS	CARTESIO_PLUS		2131
+solrad_g20		MACH_SOLRAD_G20		SOLRAD_G20		2132
+mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
+fmzwebmodul		MACH_FMZWEBMODUL	FMZWEBMODUL		2134
+rd78x00_masa		MACH_RD78X00_MASA	RD78X00_MASA		2135
+smallogger		MACH_SMALLOGGER		SMALLOGGER		2136

arch/avr32/boards/hammerhead/flash.c

@@ -15,7 +15,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/isp116x.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
 
 #include <mach/portmux.h>

arch/avr32/include/asm/uaccess.h

@@ -230,10 +230,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	ld." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\
@@ -295,10 +295,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	st." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\

arch/avr32/kernel/entry-avr32b.S

@@ -150,10 +150,10 @@ page_not_present:
 	tlbmiss_restore
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	2
@@ -250,7 +250,7 @@ syscall_badsys:
 
 	.global ret_from_fork
 ret_from_fork:
-	rcall   schedule_tail
+	call   schedule_tail
 
 	/* check for syscall tracing */
 	get_thread_info r0
@@ -261,7 +261,7 @@ ret_from_fork:
 
 syscall_trace_enter:
 	pushm	r8-r12
-	rcall	syscall_trace
+	call	syscall_trace
 	popm	r8-r12
 	rjmp	syscall_trace_cont
 
@@ -269,14 +269,14 @@ syscall_exit_work:
 	bld	r1, TIF_SYSCALL_TRACE
 	brcc	1f
 	unmask_interrupts
-	rcall	syscall_trace
+	call	syscall_trace
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 
 1:	bld	r1, TIF_NEED_RESCHED
 	brcc	2f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -287,7 +287,7 @@ syscall_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -394,7 +394,7 @@ handle_critical:
 
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_critical_exception
+	call	do_critical_exception
 
 	/* We should never get here... */
 bad_return:
@@ -407,18 +407,18 @@ bad_return:
 do_bus_error_write:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 1
 	rjmp	1f
 
 do_bus_error_read:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 0
 1:	mfsr	r12, SYSREG_BEAR
 	mov	r10, sp
-	rcall	do_bus_error
+	call	do_bus_error
 	rjmp	ret_from_exception
 
 	.align	1
@@ -433,7 +433,7 @@ do_nmi_ll:
 1:	pushm	r8, r9	/* PC and SR */
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_nmi
+	call	do_nmi
 	popm	r8-r9
 	mtsr	SYSREG_RAR_NMI, r8
 	tst	r0, r0
@@ -457,29 +457,29 @@ do_nmi_ll:
 handle_address_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_address_exception
+	call	do_address_exception
 	rjmp	ret_from_exception
 
 handle_protection_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	1
 do_illegal_opcode_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_illegal_opcode
+	call	do_illegal_opcode
 	rjmp	ret_from_exception
 
 do_dtlb_modified:
@@ -513,11 +513,11 @@ do_dtlb_modified:
 do_fpe_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	unmask_interrupts
 	mov	r12, 26
 	mov	r11, sp
-	rcall	do_fpe
+	call	do_fpe
 	rjmp	ret_from_exception
 
 ret_from_exception:
@@ -553,7 +553,7 @@ fault_resume_kernel:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1f
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 1:
 #endif
 
@@ -582,7 +582,7 @@ fault_exit_work:
 	bld	r1, TIF_NEED_RESCHED
 	brcc	1f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -593,7 +593,7 @@ fault_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -616,10 +616,10 @@ handle_debug:
 
 .Ldebug_fixup_cont:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_off
+	call	trace_hardirqs_off
 #endif
 	mov	r12, sp
-	rcall	do_debug
+	call	do_debug
 	mov	sp, r12
 
 	lddsp	r2, sp[REG_SR]
@@ -643,7 +643,7 @@ handle_debug:
 	mtsr	SYSREG_RSR_DBG, r11
 	mtsr	SYSREG_RAR_DBG, r10
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	ldmts	sp++, r0-lr
@@ -676,7 +676,7 @@ debug_resume_kernel:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bld	r11, SYSREG_GM_OFFSET
 	brcc	1f
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	mfsr	r2, SYSREG_SR
@@ -747,7 +747,7 @@ irq_level\level:
 	mov	r11, sp
 	mov	r12, \level
 
-	rcall	do_IRQ
+	call	do_IRQ
 
 	lddsp	r4, sp[REG_SR]
 	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
@@ -767,7 +767,7 @@ irq_level\level:
 
 1:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 #endif
 	popm	r8-r9
 	mtsr	rar_int\level, r8
@@ -807,7 +807,7 @@ irq_level\level:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1b
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 #endif
 	rjmp	1b
 	.endm

arch/avr32/kernel/syscall-stubs.S

@@ -61,7 +61,7 @@ __sys_execve:
 __sys_mmap2:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_mmap2
+	call	sys_mmap2
 	sub	sp, -4
 	popm	pc
 
@@ -70,7 +70,7 @@ __sys_mmap2:
 __sys_sendto:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sendto
+	call	sys_sendto
 	sub	sp, -4
 	popm	pc
 
@@ -79,7 +79,7 @@ __sys_sendto:
 __sys_recvfrom:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_recvfrom
+	call	sys_recvfrom
 	sub	sp, -4
 	popm	pc
 
@@ -88,7 +88,7 @@ __sys_recvfrom:
 __sys_pselect6:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_pselect6
+	call	sys_pselect6
 	sub	sp, -4
 	popm	pc
 
@@ -97,7 +97,7 @@ __sys_pselect6:
 __sys_splice:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_splice
+	call	sys_splice
 	sub	sp, -4
 	popm	pc
 
@@ -106,7 +106,7 @@ __sys_splice:
 __sys_epoll_pwait:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_epoll_pwait
+	call	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
 
@@ -115,6 +115,6 @@ __sys_epoll_pwait:
 __sys_sync_file_range:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sync_file_range
+	call	sys_sync_file_range
 	sub	sp, -4
 	popm	pc

arch/avr32/lib/strnlen_user.S

@@ -48,7 +48,7 @@ adjust_length:
 	lddpc	lr, _task_size
 	sub	r11, lr, r12
 	mov	r9, r11
-	rcall	__strnlen_user
+	call	__strnlen_user
 	cp.w	r12, r9
 	brgt	1f
 	popm	pc

arch/blackfin/Kconfig

@@ -1129,6 +1129,7 @@ endchoice
 
 config PM_WAKEUP_BY_GPIO
 	bool "Allow Wakeup from Standby by GPIO"
+	depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
@@ -1168,6 +1169,12 @@ config PM_BFIN_WAKE_GP
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the the same functionality on the
+	  /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"

arch/blackfin/Kconfig.debug

@@ -21,12 +21,6 @@ config DEBUG_STACK_USAGE
 config HAVE_ARCH_KGDB
 	def_bool y
 
-config KGDB_TESTCASE
-	tristate "KGDB: for test case in expect"
-	default n
-	help
-	  This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y

arch/blackfin/configs/BF518F-EZBRD_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
+# Linux kernel version: 2.6.28
-# Fri Jan  9 17:58:41 2009
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@ CONFIG_BF518=y
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@ CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@ CONFIG_BFIN_WDT=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set

arch/blackfin/configs/BF527-EZKIT_defconfig

@@ -327,8 +327,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/BF533-EZKIT_defconfig

@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/BF533-STAMP_defconfig

@@ -290,8 +290,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/BF537-STAMP_defconfig

@@ -298,8 +298,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
 # CONFIG_MTD_ONENAND is not set
 
 #

arch/blackfin/configs/BF538-EZKIT_defconfig

@@ -306,8 +306,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/BF548-EZKIT_defconfig

@@ -361,8 +361,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)

arch/blackfin/configs/BF561-EZKIT_defconfig

@@ -329,8 +329,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 

arch/blackfin/configs/BlackStamp_defconfig

@@ -288,8 +288,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/CM-BF527_defconfig

@@ -332,8 +332,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #

arch/blackfin/configs/CM-BF548_defconfig

@@ -336,8 +336,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@ CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)

arch/blackfin/configs/IP0X_defconfig

@@ -612,7 +612,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)

arch/blackfin/configs/SRV1_defconfig

@@ -282,8 +282,8 @@ CONFIG_BFIN_ICACHE=y
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WB=y
-CONFIG_BFIN_WT=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #

arch/blackfin/include/asm/Kbuild

@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h

arch/blackfin/include/asm/bfin_sport.h

@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
+ * bfin_sport.h - userspace header for bfin sport driver
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
  *
- * Created:      Thu Aug. 24 2006
+ * Copyright 2004-2008 Analog Devices Inc.
- * Description:
  *
- * Modified:
+ * Licensed under the GPL-2 or later.
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
 #ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
 #define NORM_FORMAT	0x0
 #define ALAW_FORMAT	0x2
 #define ULAW_FORMAT	0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-	/*TDM (multichannels), I2S or other mode */
+	/* TDM (multichannels), I2S or other mode */
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@ struct sport_config {
 	int serial_clk;
 	int fsync_clk;
 
-	unsigned int data_format:2;	/*Normal, u-law or a-law */
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
 
 	int word_len;		/* How length of the word in bits, 3-32 bits */
 	int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
 	unsigned short tcr1;
 	unsigned short reserved0;
@@ -117,9 +101,6 @@ struct sport_register {
 	unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */
 
@@ -149,6 +130,8 @@ struct sport_dev {
 	struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1	0
 #define	SPORT_TCR2	1
 #define	SPORT_TCLKDIV	2
@@ -169,4 +152,4 @@ struct sport_dev {
 #define SPORT_MRCS2	22
 #define SPORT_MRCS3	23
 
-#endif				/*__BFIN_SPORT_H__*/
+#endif

arch/blackfin/include/asm/ipipe.h

@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@ struct ipipe_sysinfo {
 				"%2 = CYCLES2\n"		\
 				"CC = %2 == %0\n"		\
 				"if ! CC jump 1b\n"		\
-				: "=r" (((unsigned long *)&t)[1]),	\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
-				  "=r" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
-				  "=r" (__cy2)				\
+				  "=d,a" (__cy2)				\
 				: /*no input*/ : "CC");			\
 	t;								\
 	})
@@ -118,35 +118,40 @@ void __ipipe_disable_irqdesc(struct ipipe_domain *ipd,
 
 #define __ipipe_disable_irq(irq)	(irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()					\
+static inline int __ipipe_check_tickdev(const char *devname)
-	set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+{
+	return 1;
+}
 
-#define __ipipe_unlock_root()					\
+static inline void __ipipe_lock_root(void)
-	clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+{
+	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)					\
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
-	do {								\
+void ___ipipe_sync_pipeline(unsigned long syncmask);
-		struct ipipe_domain *ipd = ipipe_current_domain;	\
-		if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-			__ipipe_sync_stage(syncmask);			\
-	} while (0)
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@ static inline unsigned long __ipipe_ffnz(unsigned long ul)
 
 #define __ipipe_run_irqtail()  /* Must be a macro */			\
 	do {								\
-		asmlinkage void __ipipe_call_irqtail(void);		\
 		unsigned long __pending;				\
 		CSYNC();						\
 		__pending = bfin_read_IPEND();				\
 		if (__pending & 0x8000) {				\
 			__pending &= ~0x8010;				\
 			if (__pending && (__pending & (__pending - 1)) == 0) \
-				__ipipe_call_irqtail();			\
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
 		}							\
 	} while (0)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (ipd == ipipe_root_domain) {				\
-			/*						\
+			local_irq_enable_hw();				\
-			 * Note: the I-pipe implements a threaded interrupt model on \
+			if (ipipe_virtual_irq_p(irq))			\
-			 * this arch for Linux external IRQs. The interrupt handler we \
-			 * call here only wakes up the associated IRQ thread. \
-			 */						\
-			if (ipipe_virtual_irq_p(irq)) {			\
-				/* No irqtail here; virtual interrupts have no effect \
-				   on IPEND so there is no need for processing \
-				   deferral. */				\
-				local_irq_enable_nohead(ipd);		\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-				local_irq_disable_nohead(ipd);		\
+			else						\
-			} else						\
-				/*					\
-				 * No need to run the irqtail here either; \
-				 * we can't be preempted by hw IRQs, so	\
-				 * non-Linux IRQs cannot stack over the short \
-				 * thread wakeup code. Which in turn means \
-				 * that no irqtail condition could be pending \
-				 * for domains above Linux in the pipeline. \
-				 */					\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 			local_irq_enable_nohead(ipd);			\
@@ -217,42 +205,24 @@ void ipipe_init_irq_threads(void);
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)		((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
-#define IS_GPIOIRQ(irq)		((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
+#define IRQ_SYSTMR		IRQ_CORETMR
-
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
 #define IRQ_SYSTMR		IRQ_TIMER0
 #define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
+#ifdef CONFIG_BF561
-#define PRIO_GPIODEMUX(irq)	CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)	CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-				 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-				 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-				 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-				 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-				 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-				 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-				 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-				 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@ int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
 #endif	/* !__ASM_BLACKFIN_IPIPE_H */

arch/blackfin/include/asm/ipipe_base.h

@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS		NR_IRQS
 #define IPIPE_IRQ_ISHIFT	5	/* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
+/* Blackfin-specific, per-cpu pipeline status */
-#define IPIPE_ROOTLOCK_FLAG	1	/* Lock pipeline for root */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)

arch/blackfin/include/asm/irq.h

@@ -65,16 +65,34 @@ void __ipipe_restore_root(unsigned long flags);
 	do {							 \
 		(x) = __ipipe_test_root() ?			 \
 			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
 #define local_irq_save(x)					 \
 	do {						 	 \
-		(x) = __ipipe_test_and_stall_root();	\
+		(x) = __ipipe_test_and_stall_root() ?		 \
+			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_restore(x)	__ipipe_restore_root(x)
+static inline void local_irq_restore(unsigned long x)
-#define local_irq_disable()	__ipipe_stall_root()
+{
-#define local_irq_enable()	__ipipe_unstall_root()
+	barrier();
+	__ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()			\
+	do {					\
+		__ipipe_stall_root();		\
+		barrier();			\
+	} while (0)
+
+static inline void local_irq_enable(void)
+{
+	barrier();
+	__ipipe_unstall_root();
+}
+
 #define irqs_disabled()		__ipipe_test_root()
 
 #define local_save_flags_hw(x) \

arch/blackfin/include/asm/thread_info.h

@@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */