staging: comedi: initialize subdevice s->io_bits in postconfig

The subdevice 'io_bits' is a bit mask of the i/o configuration for
digital subdevices. '0' values indicate that a channel is configured
as an input and '1' values that the channel is an output. Since the
subdevice data is kzalloc()'d, all channels default as inputs.

Modify __comedi_device_postconfig() so that 'io_bits' is correctly
initialized for Digital Output subdevices.

Remove all the unnecessary initializations of 's->io_bits' from the
drivers. Also, remove the unnecessary initialization of the 's->state'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers.c

@@ -285,6 +285,13 @@ static int __comedi_device_postconfig(struct comedi_device *dev)
 		if (s->type == COMEDI_SUBD_UNUSED)
 			continue;
 
+		if (s->type == COMEDI_SUBD_DO) {
+			if (s->n_chan < 32)
+				s->io_bits = (1 << s->n_chan) - 1;
+			else
+				s->io_bits = 0xffffffff;
+		}
+
 		if (s->len_chanlist == 0)
 			s->len_chanlist = 1;
 

drivers/staging/comedi/drivers/8255.c

@@ -288,9 +288,6 @@ int subdev_8255_init(struct comedi_device *dev, struct comedi_subdevice *s,
 	s->insn_bits	= subdev_8255_insn;
 	s->insn_config	= subdev_8255_insn_config;
 
-	s->state	= 0;
-	s->io_bits	= 0;
-
 	subdev_8255_do_config(dev, s);
 
 	return 0;

drivers/staging/comedi/drivers/addi-data/addi_common.c

@@ -204,7 +204,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 		s->len_chanlist =
 			devpriv->s_EeParameters.i_NbrDiChannel;
 		s->range_table = &range_digital;
-		s->io_bits = 0;	/* all bits input */
 		s->insn_config = this_board->di_config;
 		s->insn_read = this_board->di_read;
 		s->insn_write = this_board->di_write;
@@ -223,7 +222,6 @@ static int addi_auto_attach(struct comedi_device *dev,
 		s->len_chanlist =
 			devpriv->s_EeParameters.i_NbrDoChannel;
 		s->range_table = &range_digital;
-		s->io_bits = 0xf;	/* all bits output */
 
 		/* insn_config - for digital output memory */
 		s->insn_config = this_board->do_config;

drivers/staging/comedi/drivers/addi_apci_3120.c

@@ -164,7 +164,6 @@ static int apci3120_auto_attach(struct comedi_device *dev,
 	s->maxdata = 1;
 	s->len_chanlist = this_board->i_NbrDiChannel;
 	s->range_table = &range_digital;
-	s->io_bits = 0;	/* all bits input */
 	s->insn_bits = apci3120_di_insn_bits;
 
 	/*  Allocate and Initialise DO Subdevice Structures */
@@ -176,7 +175,6 @@ static int apci3120_auto_attach(struct comedi_device *dev,
 	s->maxdata = this_board->i_DoMaxdata;
 	s->len_chanlist = this_board->i_NbrDoChannel;
 	s->range_table = &range_digital;
-	s->io_bits = 0xf;	/* all bits output */
 	s->insn_bits = apci3120_do_insn_bits;
 
 	/*  Allocate and Initialise Timer Subdevice Structures */

drivers/staging/comedi/drivers/adl_pci6208.c

@@ -221,7 +221,6 @@ static int pci6208_auto_attach(struct comedi_device *dev,
 	val = inw(dev->iobase + PCI6208_DIO);
 	val = (val & PCI6208_DIO_DO_MASK) >> PCI6208_DIO_DO_SHIFT;
 	s->state	= val;
-	s->io_bits	= 0x0f;
 
 	dev_info(dev->class_dev, "%s: %s, I/O base=0x%04lx\n",
 		dev->driver->driver_name, dev->board_name, dev->iobase);

drivers/staging/comedi/drivers/adl_pci9118.c

@@ -2075,7 +2075,6 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq,
 	s->maxdata = 1;
 	s->len_chanlist = 4;
 	s->range_table = &range_digital;
-	s->io_bits = 0;		/* all bits input */
 	s->insn_bits = pci9118_insn_bits_di;
 
 	s = &dev->subdevices[3];
@@ -2085,7 +2084,6 @@ static int pci9118_common_attach(struct comedi_device *dev, int disable_irq,
 	s->maxdata = 1;
 	s->len_chanlist = 4;
 	s->range_table = &range_digital;
-	s->io_bits = 0xf;	/* all bits output */
 	s->insn_bits = pci9118_insn_bits_do;
 
 	devpriv->valid = 1;

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -1320,7 +1320,6 @@ static int pci1710_auto_attach(struct comedi_device *dev,
 		s->maxdata = 1;
 		s->len_chanlist = this_board->n_dichan;
 		s->range_table = &range_digital;
-		s->io_bits = 0;	/* all bits input */
 		s->insn_bits = pci171x_insn_bits_di;
 		subdev++;
 	}
@@ -1333,9 +1332,6 @@ static int pci1710_auto_attach(struct comedi_device *dev,
 		s->maxdata = 1;
 		s->len_chanlist = this_board->n_dochan;
 		s->range_table = &range_digital;
-		/* all bits output */
-		s->io_bits = (1 << this_board->n_dochan) - 1;
-		s->state = 0;
 		s->insn_bits = pci171x_insn_bits_do;
 		subdev++;
 	}

drivers/staging/comedi/drivers/amplc_dio200_common.c

@@ -1022,8 +1022,6 @@ static int dio200_subdev_8255_init(struct comedi_device *dev,
 	s->maxdata = 1;
 	s->insn_bits = dio200_subdev_8255_bits;
 	s->insn_config = dio200_subdev_8255_config;
-	s->state = 0;
-	s->io_bits = 0;
 	dio200_subdev_8255_set_dir(dev, s);
 	return 0;
 }

drivers/staging/comedi/drivers/icp_multi.c

@@ -548,7 +548,6 @@ static int icp_multi_auto_attach(struct comedi_device *dev,
 	s->maxdata = 1;
 	s->len_chanlist = 16;
 	s->range_table = &range_digital;
-	s->io_bits = 0;
 	s->insn_bits = icp_multi_insn_bits_di;
 
 	s = &dev->subdevices[3];
@@ -558,8 +557,6 @@ static int icp_multi_auto_attach(struct comedi_device *dev,
 	s->maxdata = 1;
 	s->len_chanlist = 8;
 	s->range_table = &range_digital;
-	s->io_bits = 0xff;
-	s->state = 0;
 	s->insn_bits = icp_multi_insn_bits_do;
 
 	s = &dev->subdevices[4];

drivers/staging/comedi/drivers/me_daq.c

@@ -545,7 +545,6 @@ static int me_auto_attach(struct comedi_device *dev,
 	s->range_table	= &range_digital;
 	s->insn_bits	= me_dio_insn_bits;
 	s->insn_config	= me_dio_insn_config;
-	s->io_bits	= 0;
 
 	dev_info(dev->class_dev, "%s: %s attached\n",
 		dev->driver->driver_name, dev->board_name);

drivers/staging/comedi/drivers/ni_660x.c

@@ -1213,7 +1213,6 @@ static int ni_660x_auto_attach(struct comedi_device *dev,
 	s->range_table = &range_digital;
 	s->insn_bits = ni_660x_dio_insn_bits;
 	s->insn_config = ni_660x_dio_insn_config;
-	s->io_bits = 0;		/* all bits default to input */
 	/*  we use the ioconfig registers to control dio direction, so zero
 	output enables in stc dio control reg */
 	ni_660x_write_register(dev, 0, 0, STCDIOControl);

drivers/staging/comedi/drivers/ni_daq_700.c

@@ -212,7 +212,6 @@ static int daq700_auto_attach(struct comedi_device *dev,
 	s->maxdata	= 1;
 	s->insn_bits	= daq700_dio_insn_bits;
 	s->insn_config	= daq700_dio_insn_config;
-	s->state	= 0;
 	s->io_bits	= 0x00ff;
 
 	/* DAQCard-700 ai */