regulator: da9052: Use regulator_get_voltage_sel_regmap()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Axel Lin 2012-04-24 09:54:38 +08:00 коммит произвёл Mark Brown
Родитель 98667b4362
Коммит 09812bc40c
1 изменённых файлов: 8 добавлений и 24 удалений

Просмотреть файл

@ -69,7 +69,6 @@ struct da9052_regulator_info {
int step_uV;
int min_uV;
int max_uV;
unsigned char volt_shift;
unsigned char activate_bit;
};
@ -208,9 +207,8 @@ static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
if (ret < 0)
return ret;
ret = da9052_reg_update(regulator->da9052,
DA9052_BUCKCORE_REG + id,
(1 << info->volt_shift) - 1, *selector);
ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
rdev->desc->vsel_mask, *selector);
if (ret < 0)
return ret;
@ -231,29 +229,13 @@ static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
return ret;
}
static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
{
struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
struct da9052_regulator_info *info = regulator->info;
int offset = rdev_get_id(rdev);
int ret;
ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset);
if (ret < 0)
return ret;
ret &= ((1 << info->volt_shift) - 1);
return ret;
}
static struct regulator_ops da9052_dcdc_ops = {
.set_voltage = da9052_regulator_set_voltage,
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
.list_voltage = da9052_list_voltage,
.get_voltage_sel = da9052_get_regulator_voltage_sel,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@ -263,7 +245,7 @@ static struct regulator_ops da9052_ldo_ops = {
.set_voltage = da9052_regulator_set_voltage,
.list_voltage = da9052_list_voltage,
.get_voltage_sel = da9052_get_regulator_voltage_sel,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@ -278,13 +260,14 @@ static struct regulator_ops da9052_ldo_ops = {
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.volt_shift = (sbits),\
.activate_bit = (abits),\
}
@ -297,13 +280,14 @@ static struct regulator_ops da9052_ldo_ops = {
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
.volt_shift = (sbits),\
.activate_bit = (abits),\
}