Merge commit 'kumar/next' into next

This commit is contained in:
Benjamin Herrenschmidt 2009-03-30 13:46:19 +11:00
Родитель ec78c8ac16 df4b6806d3
Коммит 0a3108beea
69 изменённых файлов: 4507 добавлений и 1813 удалений

Просмотреть файл

@ -4,46 +4,56 @@ The SSI is a serial device that communicates with audio codecs. It can
be programmed in AC97, I2S, left-justified, or right-justified modes. be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties: Required properties:
- compatible : compatible list, containing "fsl,ssi" - compatible: Compatible list, contains "fsl,ssi".
- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on - cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
- reg : offset and length of the register set for the device - reg: Offset and length of the register set for the device.
- interrupts : <a b> where a is the interrupt number and b is a - interrupts: <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and field that represents an encoding of the sense and
level information for the interrupt. This should be level information for the interrupt. This should be
encoded based on the information in section 2) encoded based on the information in section 2)
depending on the type of interrupt controller you depending on the type of interrupt controller you
have. have.
- interrupt-parent : the phandle for the interrupt controller that - interrupt-parent: The phandle for the interrupt controller that
services interrupts for this device. services interrupts for this device.
- fsl,mode : the operating mode for the SSI interface - fsl,mode: The operating mode for the SSI interface.
"i2s-slave" - I2S mode, SSI is clock slave "i2s-slave" - I2S mode, SSI is clock slave
"i2s-master" - I2S mode, SSI is clock master "i2s-master" - I2S mode, SSI is clock master
"lj-slave" - left-justified mode, SSI is clock slave "lj-slave" - left-justified mode, SSI is clock slave
"lj-master" - l.j. mode, SSI is clock master "lj-master" - l.j. mode, SSI is clock master
"rj-slave" - right-justified mode, SSI is clock slave "rj-slave" - right-justified mode, SSI is clock slave
"rj-master" - r.j., SSI is clock master "rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave "ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master "ac97-master" - AC97 mode, SSI is clock master
- fsl,playback-dma: phandle to a node for the DMA channel to use for - fsl,playback-dma: Phandle to a node for the DMA channel to use for
playback of audio. This is typically dictated by SOC playback of audio. This is typically dictated by SOC
design. See the notes below. design. See the notes below.
- fsl,capture-dma: phandle to a node for the DMA channel to use for - fsl,capture-dma: Phandle to a node for the DMA channel to use for
capture (recording) of audio. This is typically dictated capture (recording) of audio. This is typically dictated
by SOC design. See the notes below. by SOC design. See the notes below.
- fsl,fifo-depth: the number of elements in the transmit and receive FIFOs. - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
This number is the maximum allowed value for SFCSR[TFWM0]. This number is the maximum allowed value for SFCSR[TFWM0].
- fsl,ssi-asynchronous:
If specified, the SSI is to be programmed in asynchronous
mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
all be connected to valid signals. In synchronous mode,
SRCK and SRFS are ignored. Asynchronous mode allows
playback and capture to use different sample sizes and
sample rates. Some drivers may require that SRCK and STCK
be connected together, and SRFS and STFS be connected
together. This would still allow different sample sizes,
but not different sample rates.
Optional properties: Optional properties:
- codec-handle : phandle to a 'codec' node that defines an audio - codec-handle: Phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically codec connected to this SSI. This node is typically
a child of an I2C or other control node. a child of an I2C or other control node.
Child 'codec' node required properties: Child 'codec' node required properties:
- compatible : compatible list, contains the name of the codec - compatible: Compatible list, contains the name of the codec
Child 'codec' node optional properties: Child 'codec' node optional properties:
- clock-frequency : The frequency of the input clock, which typically - clock-frequency: The frequency of the input clock, which typically comes
comes from an on-board dedicated oscillator. from an on-board dedicated oscillator.
Notes on fsl,playback-dma and fsl,capture-dma: Notes on fsl,playback-dma and fsl,capture-dma:

Просмотреть файл

@ -181,70 +181,76 @@
phy_type = "ulpi"; phy_type = "ulpi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 33 ]; local-mac-address = [ 00 08 e5 11 32 33 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
linux,network-index = <0>; linux,network-index = <0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 08 e5 11 32 34 ]; local-mac-address = [ 00 08 e5 11 32 34 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
linux,network-index = <1>; linux,network-index = <1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -247,34 +247,37 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "gmii"; phy-connection-type = "gmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
}; };
enet1: ethernet@26000 { enet1: ethernet@26000 {

Просмотреть файл

@ -247,34 +247,37 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "gmii"; phy-connection-type = "gmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
}; };
enet1: ethernet@26000 { enet1: ethernet@26000 {

Просмотреть файл

@ -202,34 +202,37 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "gmii"; phy-connection-type = "gmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
};
};
}; };
enet1: ethernet@26000 { enet1: ethernet@26000 {

Просмотреть файл

@ -124,67 +124,72 @@
}; };
}; };
mdio@24520 { /* For TSECs */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
PHY1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
/* Mac address filled in by bootwrapper */ /* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&PHY1>; phy-handle = <&PHY1>;
mdio@520 { /* For TSECs */
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
PHY1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
/* Mac address filled in by bootwrapper */ /* Mac address filled in by bootwrapper */
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&PHY2>; phy-handle = <&PHY2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
mpic: pic@40000 { mpic: pic@40000 {

Просмотреть файл

@ -180,7 +180,7 @@
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
sleep = <&pmc 0x20000000>; sleep = <&pmc 0x20000000>;
ranges; ranges = <0x0 0x24000 0x1000>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
@ -195,11 +195,11 @@
fixed-link = <1 1 1000 0 0>; fixed-link = <1 1 1000 0 0>;
fsl,magic-packet; fsl,magic-packet;
mdio@24520 { mdio@520 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "fsl,gianfar-mdio"; compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>; reg = <0x520 0x20>;
phy4: ethernet-phy@4 { phy4: ethernet-phy@4 {
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
interrupts = <20 0x8>; interrupts = <20 0x8>;
@ -221,6 +221,7 @@
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>; interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
@ -229,11 +230,11 @@
sleep = <&pmc 0x10000000>; sleep = <&pmc 0x10000000>;
fsl,magic-packet; fsl,magic-packet;
mdio@25520 { mdio@520 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
compatible = "fsl,gianfar-tbi"; compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>; reg = <0x520 0x20>;
tbi1: tbi-phy@11 { tbi1: tbi-phy@11 {
reg = <0x11>; reg = <0x11>;

Просмотреть файл

@ -190,66 +190,74 @@
phy_type = "utmi"; phy_type = "utmi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = < &phy0 >; phy-handle = < &phy0 >;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <19 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = < &phy1 >; phy-handle = < &phy1 >;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -170,57 +170,52 @@
phy_type = "ulpi"; phy_type = "ulpi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
/* Vitesse 8201 */
phy1c: ethernet-phy@1c {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy1c>; phy-handle = <&phy1c>;
linux,network-index = <0>; linux,network-index = <0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
/* Vitesse 8201 */
phy1c: ethernet-phy@1c {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
@ -228,6 +223,18 @@
fixed-link = <1 1 1000 0 0>; fixed-link = <1 1 1000 0 0>;
linux,network-index = <1>; linux,network-index = <1>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -149,37 +149,41 @@
phy_type = "ulpi"; phy_type = "ulpi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
/* Vitesse 8201 */
phy1c: ethernet-phy@1c {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy1c>; phy-handle = <&phy1c>;
linux,network-index = <0>; linux,network-index = <0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
/* Vitesse 8201 */
phy1c: ethernet-phy@1c {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -167,69 +167,76 @@
phy_type = "ulpi"; phy_type = "ulpi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
linux,network-index = <0>; linux,network-index = <0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
linux,network-index = <1>; linux,network-index = <1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -129,21 +129,38 @@
reg = <0x200 0x100>; reg = <0x200 0x100>;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 { i2c@3000 {
compatible = "dallas,ds1374"; #address-cells = <1>;
reg = <0x68>; #size-cells = <0>;
interrupts = <19 0x8>; cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
};
sdhci@2e000 {
compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
}; };
@ -176,70 +193,83 @@
interrupts = <38 0x8>; interrupts = <38 0x8>;
dr_mode = "host"; dr_mode = "host";
phy_type = "ulpi"; phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -311,15 +341,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
sata@18000 { sata@18000 {
@ -327,6 +349,7 @@
reg = <0x18000 0x1000>; reg = <0x18000 0x1000>;
interrupts = <44 0x8>; interrupts = <44 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x000000c0>;
}; };
sata@19000 { sata@19000 {
@ -334,6 +357,7 @@
reg = <0x19000 0x1000>; reg = <0x19000 0x1000>;
interrupts = <45 0x8>; interrupts = <45 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000030>;
}; };
/* IPIC /* IPIC
@ -349,6 +373,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -403,6 +434,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <0>; clock-frequency = <0>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
@ -428,6 +460,7 @@
0 0 0 2 &ipic 1 8 0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8 0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>; 0 0 0 4 &ipic 1 8>;
sleep = <&pmc 0x00300000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {
@ -459,6 +492,7 @@
0 0 0 2 &ipic 2 8 0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8 0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>; 0 0 0 4 &ipic 2 8>;
sleep = <&pmc 0x000c0000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {

Просмотреть файл

@ -127,37 +127,54 @@
gpio-controller; gpio-controller;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 { i2c@3000 {
compatible = "national,lm75"; #address-cells = <1>;
reg = <0x48>; #size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8377erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
}; };
at24@50 { sdhci@2e000 {
compatible = "at24,24c256"; compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
reg = <0x50>; reg = <0x2e000 0x1000>;
}; interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
rtc@68 { /* Filled in by U-Boot */
compatible = "dallas,ds1339"; clock-frequency = <0>;
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8377erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
}; };
}; };
@ -228,64 +245,76 @@
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
interrupts = <38 0x8>; interrupts = <38 0x8>;
phy_type = "ulpi"; phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>; fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -318,15 +347,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
sata@18000 { sata@18000 {
@ -334,6 +355,7 @@
reg = <0x18000 0x1000>; reg = <0x18000 0x1000>;
interrupts = <44 0x8>; interrupts = <44 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x000000c0>;
}; };
sata@19000 { sata@19000 {
@ -341,6 +363,7 @@
reg = <0x19000 0x1000>; reg = <0x19000 0x1000>;
interrupts = <45 0x8>; interrupts = <45 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000030>;
}; };
/* IPIC /* IPIC
@ -356,6 +379,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -381,6 +411,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>; clock-frequency = <66666666>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
@ -406,6 +437,7 @@
0 0 0 2 &ipic 1 8 0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8 0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>; 0 0 0 4 &ipic 1 8>;
sleep = <&pmc 0x00300000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {
@ -437,6 +469,7 @@
0 0 0 2 &ipic 2 8 0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8 0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>; 0 0 0 4 &ipic 2 8>;
sleep = <&pmc 0x000c0000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {

Просмотреть файл

@ -129,21 +129,38 @@
reg = <0x200 0x100>; reg = <0x200 0x100>;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 { i2c@3000 {
compatible = "dallas,ds1374"; #address-cells = <1>;
reg = <0x68>; #size-cells = <0>;
interrupts = <19 0x8>; cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
};
sdhci@2e000 {
compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
}; };
@ -215,70 +232,83 @@
interrupts = <38 0x8>; interrupts = <38 0x8>;
dr_mode = "host"; dr_mode = "host";
phy_type = "ulpi"; phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -311,15 +341,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
/* IPIC /* IPIC
@ -335,6 +357,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -390,6 +419,7 @@
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
clock-frequency = <0>; clock-frequency = <0>;
sleep = <&pmc 0x00010000>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
#address-cells = <3>; #address-cells = <3>;
@ -414,6 +444,7 @@
0 0 0 2 &ipic 1 8 0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8 0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>; 0 0 0 4 &ipic 1 8>;
sleep = <&pmc 0x00300000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {
@ -445,6 +476,7 @@
0 0 0 2 &ipic 2 8 0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8 0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>; 0 0 0 4 &ipic 2 8>;
sleep = <&pmc 0x000c0000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {

Просмотреть файл

@ -127,37 +127,54 @@
gpio-controller; gpio-controller;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 { i2c@3000 {
compatible = "national,lm75"; #address-cells = <1>;
reg = <0x48>; #size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8378erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
}; };
at24@50 { sdhci@2e000 {
compatible = "at24,24c256"; compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
reg = <0x50>; reg = <0x2e000 0x1000>;
}; interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
rtc@68 { /* Filled in by U-Boot */
compatible = "dallas,ds1339"; clock-frequency = <0>;
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8378erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
}; };
}; };
@ -228,62 +245,76 @@
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
interrupts = <38 0x8>; interrupts = <38 0x8>;
phy_type = "ulpi"; phy_type = "ulpi";
sleep = <&pmc 0x00c00000>;
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>; fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -316,15 +347,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
/* IPIC /* IPIC
@ -340,6 +363,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -365,6 +395,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>; clock-frequency = <66666666>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
@ -390,6 +421,7 @@
0 0 0 2 &ipic 1 8 0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8 0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>; 0 0 0 4 &ipic 1 8>;
sleep = <&pmc 0x00300000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {
@ -421,6 +453,7 @@
0 0 0 2 &ipic 2 8 0 0 0 2 &ipic 2 8
0 0 0 3 &ipic 2 8 0 0 0 3 &ipic 2 8
0 0 0 4 &ipic 2 8>; 0 0 0 4 &ipic 2 8>;
sleep = <&pmc 0x000c0000>;
clock-frequency = <0>; clock-frequency = <0>;
pcie@0 { pcie@0 {

Просмотреть файл

@ -127,21 +127,38 @@
reg = <0x200 0x100>; reg = <0x200 0x100>;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 { i2c@3000 {
compatible = "dallas,ds1374"; #address-cells = <1>;
reg = <0x68>; #size-cells = <0>;
interrupts = <19 0x8>; cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <19 0x8>;
interrupt-parent = <&ipic>;
};
};
sdhci@2e000 {
compatible = "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
}; };
@ -213,69 +230,83 @@
interrupts = <38 0x8>; interrupts = <38 0x8>;
dr_mode = "host"; dr_mode = "host";
phy_type = "ulpi"; phy_type = "ulpi";
}; sleep = <&pmc 0x00c00000>;
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
}; };
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -308,15 +339,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
sata@18000 { sata@18000 {
@ -324,6 +347,7 @@
reg = <0x18000 0x1000>; reg = <0x18000 0x1000>;
interrupts = <44 0x8>; interrupts = <44 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x000000c0>;
}; };
sata@19000 { sata@19000 {
@ -331,6 +355,7 @@
reg = <0x19000 0x1000>; reg = <0x19000 0x1000>;
interrupts = <45 0x8>; interrupts = <45 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000030>;
}; };
sata@1a000 { sata@1a000 {
@ -338,6 +363,7 @@
reg = <0x1a000 0x1000>; reg = <0x1a000 0x1000>;
interrupts = <46 0x8>; interrupts = <46 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x0000000c>;
}; };
sata@1b000 { sata@1b000 {
@ -345,6 +371,7 @@
reg = <0x1b000 0x1000>; reg = <0x1b000 0x1000>;
interrupts = <47 0x8>; interrupts = <47 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000003>;
}; };
/* IPIC /* IPIC
@ -360,6 +387,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -414,6 +448,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <0>; clock-frequency = <0>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;

Просмотреть файл

@ -125,37 +125,54 @@
gpio-controller; gpio-controller;
}; };
i2c@3000 { sleep-nexus {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <1>;
cell-index = <0>; compatible = "simple-bus";
compatible = "fsl-i2c"; sleep = <&pmc 0x0c000000>;
reg = <0x3000 0x100>; ranges;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 { i2c@3000 {
compatible = "national,lm75"; #address-cells = <1>;
reg = <0x48>; #size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
dtt@48 {
compatible = "national,lm75";
reg = <0x48>;
};
at24@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8379erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};
}; };
at24@50 { sdhci@2e000 {
compatible = "at24,24c256"; compatible = "fsl,mpc8379-esdhc";
reg = <0x50>; reg = <0x2e000 0x1000>;
}; interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
rtc@68 { /* Filled in by U-Boot */
compatible = "dallas,ds1339"; clock-frequency = <0>;
reg = <0x68>;
};
mcu_pio: mcu@a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8379erdb",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
}; };
}; };
@ -226,63 +243,76 @@
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
interrupts = <38 0x8>; interrupts = <38 0x8>;
phy_type = "ulpi"; phy_type = "ulpi";
}; sleep = <&pmc 0x00c00000>;
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
}; };
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
sleep = <&pmc 0xc0000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii"; phy-connection-type = "mii";
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>; fixed-link = <1 1 1000 0 0>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
sleep = <&pmc 0x30000000>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {
@ -315,15 +345,7 @@
fsl,channel-fifo-len = <24>; fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>; fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>; fsl,descriptor-types-mask = <0x3ab0ebf>;
}; sleep = <&pmc 0x03000000>;
sdhci@2e000 {
compatible = "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
}; };
sata@18000 { sata@18000 {
@ -331,6 +353,7 @@
reg = <0x18000 0x1000>; reg = <0x18000 0x1000>;
interrupts = <44 0x8>; interrupts = <44 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x000000c0>;
}; };
sata@19000 { sata@19000 {
@ -338,6 +361,7 @@
reg = <0x19000 0x1000>; reg = <0x19000 0x1000>;
interrupts = <45 0x8>; interrupts = <45 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000030>;
}; };
sata@1a000 { sata@1a000 {
@ -345,6 +369,7 @@
reg = <0x1a000 0x1000>; reg = <0x1a000 0x1000>;
interrupts = <46 0x8>; interrupts = <46 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x0000000c>;
}; };
sata@1b000 { sata@1b000 {
@ -352,6 +377,7 @@
reg = <0x1b000 0x1000>; reg = <0x1b000 0x1000>;
interrupts = <47 0x8>; interrupts = <47 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
sleep = <&pmc 0x00000003>;
}; };
/* IPIC /* IPIC
@ -367,6 +393,13 @@
#interrupt-cells = <2>; #interrupt-cells = <2>;
reg = <0x700 0x100>; reg = <0x700 0x100>;
}; };
pmc: power@b00 {
compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 0x8>;
interrupt-parent = <&ipic>;
};
}; };
pci0: pci@e0008500 { pci0: pci@e0008500 {
@ -392,6 +425,7 @@
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
sleep = <&pmc 0x00010000>;
clock-frequency = <66666666>; clock-frequency = <66666666>;
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;

Просмотреть файл

@ -137,42 +137,6 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 0x1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 0x1>;
reg = <1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
usb@22000 { usb@22000 {
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
reg = <0x22000 0x1000>; reg = <0x22000 0x1000>;
@ -194,31 +158,73 @@
}; };
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 0x1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 0x1>;
reg = <1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@26000 { enet1: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
usb@2b000 { usb@2b000 {

Просмотреть файл

@ -126,97 +126,106 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "FEC"; model = "FEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>; interrupts = <41 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -126,66 +126,72 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -98,44 +98,6 @@
dfsrr; dfsrr;
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
dma@21300 { dma@21300 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
@ -178,31 +140,74 @@
}; };
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@26000 { enet1: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -142,129 +142,141 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
/* eTSEC 3/4 are currently broken /* eTSEC 3/4 are currently broken
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
*/ */

Просмотреть файл

@ -126,66 +126,72 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -115,78 +115,84 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <5 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <7 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
mpic: pic@40000 { mpic: pic@40000 {

Просмотреть файл

@ -149,78 +149,84 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -312,129 +312,141 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -312,129 +312,141 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -148,35 +148,38 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {

Просмотреть файл

@ -180,133 +180,144 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -159,68 +159,76 @@
phy_type = "ulpi"; phy_type = "ulpi";
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&ipic>;
interrupts = <21 0x8>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>; interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
linux,network-index = <0>; linux,network-index = <0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&ipic>;
interrupts = <20 0x8>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&ipic>;
interrupts = <21 0x8>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>; interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>; interrupt-parent = <&ipic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
linux,network-index = <1>; linux,network-index = <1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -234,66 +234,72 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -139,77 +139,83 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1b {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1b>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@1c {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1b {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1b>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@1c {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
mpic: pic@40000 { mpic: pic@40000 {

Просмотреть файл

@ -192,132 +192,144 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy0: ethernet-phy@1f {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1f>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy0>; phy-handle = <&phy0>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@1f {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1f>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
phy-connection-type = "rgmii-id"; phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -0,0 +1,338 @@
/*
* Device Tree Source for the Socrates board (MPC8544).
*
* Copyright (c) 2008 Emcraft Systems.
* Sergei Poselenov, <sposelenov@emcraft.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "abb,socrates";
compatible = "abb,socrates";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8544@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000>; // Filled in by U-Boot
};
soc8544@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled in by U-Boot
compatible = "fsl,mpc8544-immr", "simple-bus";
memory-controller@2000 {
compatible = "fsl,mpc8544-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8544-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>;
cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
dtt@28 {
compatible = "winbond,w83782d";
reg = <0x28>;
};
rtc@32 {
compatible = "epson,rx8025";
reg = <0x32>;
interrupts = <7 1>;
interrupt-parent = <&mpic>;
};
dtt@4c {
compatible = "dallas,ds75";
reg = <0x4c>;
};
ts@4a {
compatible = "ti,tsc2003";
reg = <0x4a>;
interrupt-parent = <&mpic>;
interrupts = <8 1>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <0 1>;
reg = <0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <0 1>;
reg = <1>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
};
};
};
enet1: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
};
localbus {
compatible = "fsl,mpc8544-localbus",
"fsl,pq3-localbus",
"simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xe0005000 0x40>;
ranges = <0 0 0xfc000000 0x04000000
2 0 0xc8000000 0x04000000
3 0 0xc0000000 0x00100000
>; /* Overwritten by U-Boot */
nor_flash@0,0 {
compatible = "amd,s29gl256n", "cfi-flash";
bank-width = <2>;
reg = <0x0 0x000000 0x4000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x1e0000>;
read-only;
};
partition@1e0000 {
label = "dtb";
reg = <0x1e0000 0x20000>;
};
partition@200000 {
label = "root";
reg = <0x200000 0x200000>;
};
partition@400000 {
label = "user";
reg = <0x400000 0x3b80000>;
};
partition@3f80000 {
label = "env";
reg = <0x3f80000 0x40000>;
read-only;
};
partition@3fc0000 {
label = "u-boot";
reg = <0x3fc0000 0x40000>;
read-only;
};
};
display@2,0 {
compatible = "fujitsu,lime";
reg = <2 0x0 0x4000000>;
interrupt-parent = <&mpic>;
interrupts = <6 1>;
};
fpga_pic: fpga-pic@3,10 {
compatible = "abb,socrates-fpga-pic";
reg = <3 0x10 0x10>;
interrupt-controller;
/* IRQs 2, 10, 11, active low, level-sensitive */
interrupts = <2 1 10 1 11 1>;
interrupt-parent = <&mpic>;
#interrupt-cells = <3>;
};
spi@3,60 {
compatible = "abb,socrates-spi";
reg = <3 0x60 0x10>;
interrupts = <8 4 0>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
nand@3,70 {
compatible = "abb,socrates-nand";
reg = <3 0x70 0x04>;
bank-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
data@0 {
label = "data";
reg = <0x0 0x40000000>;
};
};
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
};
pci0: pci@e0008000 {
cell-index = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pci";
device_type = "pci";
reg = <0xe0008000 0x1000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
0x8800 0x0 0x0 1 &mpic 5 1
/* IDSEL 0x12 */
0x9000 0x0 0x0 1 &mpic 4 1>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <0x0 0x0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
};
};

Просмотреть файл

@ -124,66 +124,72 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <2>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <2>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <5 4>;
reg = <4>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy4>; phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
mpic: pic@40000 { mpic: pic@40000 {

Просмотреть файл

@ -136,94 +136,103 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "FEC"; model = "FEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>; interrupts = <41 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -135,72 +135,78 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -148,134 +148,146 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy4>; phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -148,134 +148,146 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x26520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@27520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x27520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
phy4: ethernet-phy@4 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <4>;
device_type = "ethernet-phy";
};
phy5: ethernet-phy@5 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <5>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet2: ethernet@26000 { enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>; cell-index = <2>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x26000 0x1000>; reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>; interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>; tbi-handle = <&tbi2>;
phy-handle = <&phy3>; phy-handle = <&phy3>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet3: ethernet@27000 { enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>; cell-index = <3>;
device_type = "network"; device_type = "network";
model = "eTSEC"; model = "eTSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x27000 0x1000>; reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>; interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>; tbi-handle = <&tbi3>;
phy-handle = <&phy4>; phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -135,72 +135,78 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
serial0: serial@4500 { serial0: serial@4500 {

Просмотреть файл

@ -137,72 +137,78 @@
}; };
}; };
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@25520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x25520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@24000 { enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>; cell-index = <0>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x24000 0x1000>; reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>; interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>; tbi-handle = <&tbi0>;
phy-handle = <&phy2>; phy-handle = <&phy2>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
enet1: ethernet@25000 { enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>; cell-index = <1>;
device_type = "network"; device_type = "network";
model = "TSEC"; model = "TSEC";
compatible = "gianfar"; compatible = "gianfar";
reg = <0x25000 0x1000>; reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>; interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>; interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>; tbi-handle = <&tbi1>;
phy-handle = <&phy1>; phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
}; };
mpic: pic@40000 { mpic: pic@40000 {

Разница между файлами не показана из-за своего большого размера Загрузить разницу

Просмотреть файл

@ -58,6 +58,7 @@ static struct __initdata of_device_id asp8347_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -42,6 +42,7 @@
static struct of_device_id __initdata mpc834x_itx_ids[] = { static struct of_device_id __initdata mpc834x_itx_ids[] = {
{ .compatible = "fsl,pq2pro-localbus", }, { .compatible = "fsl,pq2pro-localbus", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -112,6 +112,7 @@ static struct of_device_id mpc834x_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -96,6 +96,7 @@ static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -48,6 +48,7 @@ static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -84,6 +84,7 @@ static struct __initdata of_device_id sbc834x_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -51,6 +51,12 @@ config MPC85xx_DS
help help
This option enables support for the MPC85xx DS (MPC8544 DS) board This option enables support for the MPC85xx DS (MPC8544 DS) board
config SOCRATES
bool "Socrates"
select DEFAULT_UIMAGE
help
This option enables support for the Socrates board.
config KSI8560 config KSI8560
bool "Emerson KSI8560" bool "Emerson KSI8560"
select DEFAULT_UIMAGE select DEFAULT_UIMAGE

Просмотреть файл

@ -13,4 +13,5 @@ obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_KSI8560) += ksi8560.o

Просмотреть файл

@ -219,6 +219,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
{ .type = "simple-bus", }, { .type = "simple-bus", },
{ .name = "cpm", }, { .name = "cpm", },
{ .name = "localbus", }, { .name = "localbus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -92,6 +92,7 @@ static struct of_device_id __initdata mpc8536_ds_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -226,6 +226,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "cpm", }, { .name = "cpm", },
{ .name = "localbus", }, { .name = "localbus", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -336,6 +336,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -204,6 +204,7 @@ static struct of_device_id __initdata mpc85xxds_ids[] = {
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "soc", }, { .compatible = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -265,6 +265,7 @@ static struct of_device_id mpc85xx_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .type = "qe", }, { .type = "qe", },
{ .compatible = "fsl,qe", }, { .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -154,6 +154,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", }, { .name = "soc", },
{ .type = "soc", }, { .type = "soc", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -213,6 +213,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "cpm", }, { .name = "cpm", },
{ .name = "localbus", }, { .name = "localbus", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -0,0 +1,133 @@
/*
* Copyright (c) 2008 Emcraft Systems
* Sergei Poselenov <sposelenov@emcraft.com>
*
* Based on MPC8560 ADS and arch/ppc tqm85xx ports
*
* Maintained by Kumar Gala (see MAINTAINERS for contact information)
*
* Copyright 2008 Freescale Semiconductor Inc.
*
* Copyright (c) 2005-2006 DENX Software Engineering
* Stefan Roese <sr@denx.de>
*
* Based on original work by
* Kumar Gala <kumar.gala@freescale.com>
* Copyright 2004 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpic.h>
#include <asm/prom.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "socrates_fpga_pic.h"
static void __init socrates_pic_init(void)
{
struct mpic *mpic;
struct resource r;
struct device_node *np;
np = of_find_node_by_type(NULL, "open-pic");
if (!np) {
printk(KERN_ERR "Could not find open-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "Could not map mpic register space\n");
of_node_put(np);
return;
}
mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
of_node_put(np);
mpic_init(mpic);
np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
if (!np) {
printk(KERN_ERR "Could not find socrates-fpga-pic node\n");
return;
}
socrates_fpga_pic_init(np);
of_node_put(np);
}
/*
* Setup the architecture
*/
static void __init socrates_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("socrates_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
fsl_add_bridge(np, 1);
#endif
}
static struct of_device_id __initdata socrates_of_bus_ids[] = {
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{},
};
static void __init socrates_init(void)
{
of_platform_bus_probe(NULL, socrates_of_bus_ids, NULL);
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init socrates_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "abb,socrates"))
return 1;
return 0;
}
define_machine(socrates) {
.name = "Socrates",
.probe = socrates_probe,
.setup_arch = socrates_setup_arch,
.init = socrates_init,
.init_IRQ = socrates_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};

Просмотреть файл

@ -0,0 +1,327 @@
/*
* Copyright (C) 2008 Ilya Yanok, Emcraft Systems
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/irq.h>
#include <linux/of_platform.h>
#include <linux/io.h>
/*
* The FPGA supports 9 interrupt sources, which can be routed to 3
* interrupt request lines of the MPIC. The line to be used can be
* specified through the third cell of FDT property "interrupts".
*/
#define SOCRATES_FPGA_NUM_IRQS 9
#define FPGA_PIC_IRQCFG (0x0)
#define FPGA_PIC_IRQMASK(n) (0x4 + 0x4 * (n))
#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
struct socrates_fpga_irq_info {
unsigned int irq_line;
int type;
};
/*
* Interrupt routing and type table
*
* IRQ_TYPE_NONE means the interrupt type is configurable,
* otherwise it's fixed to the specified value.
*/
static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
[0] = {0, IRQ_TYPE_NONE},
[1] = {0, IRQ_TYPE_LEVEL_HIGH},
[2] = {0, IRQ_TYPE_LEVEL_LOW},
[3] = {0, IRQ_TYPE_NONE},
[4] = {0, IRQ_TYPE_NONE},
[5] = {0, IRQ_TYPE_NONE},
[6] = {0, IRQ_TYPE_NONE},
[7] = {0, IRQ_TYPE_NONE},
[8] = {0, IRQ_TYPE_LEVEL_HIGH},
};
#define socrates_fpga_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
static void __iomem *socrates_fpga_pic_iobase;
static struct irq_host *socrates_fpga_pic_irq_host;
static unsigned int socrates_fpga_irqs[3];
static inline uint32_t socrates_fpga_pic_read(int reg)
{
return in_be32(socrates_fpga_pic_iobase + reg);
}
static inline void socrates_fpga_pic_write(int reg, uint32_t val)
{
out_be32(socrates_fpga_pic_iobase + reg, val);
}
static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
{
uint32_t cause;
unsigned long flags;
int i;
/* Check irq line routed to the MPIC */
for (i = 0; i < 3; i++) {
if (irq == socrates_fpga_irqs[i])
break;
}
if (i == 3)
return NO_IRQ;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
if (cause >> (i + 16))
break;
}
return irq_linear_revmap(socrates_fpga_pic_irq_host,
(irq_hw_number_t)i);
}
void socrates_fpga_pic_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq;
/*
* See if we actually have an interrupt, call generic handling code if
* we do.
*/
cascade_irq = socrates_fpga_pic_get_irq(irq);
if (cascade_irq != NO_IRQ)
generic_handle_irq(cascade_irq);
desc->chip->eoi(irq);
}
static void socrates_fpga_pic_ack(unsigned int virq)
{
unsigned long flags;
unsigned int hwirq, irq_line;
uint32_t mask;
hwirq = socrates_fpga_irq_to_hw(virq);
irq_line = fpga_irqs[hwirq].irq_line;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
& SOCRATES_FPGA_IRQ_MASK;
mask |= (1 << (hwirq + 16));
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
}
static void socrates_fpga_pic_mask(unsigned int virq)
{
unsigned long flags;
unsigned int hwirq;
int irq_line;
u32 mask;
hwirq = socrates_fpga_irq_to_hw(virq);
irq_line = fpga_irqs[hwirq].irq_line;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
& SOCRATES_FPGA_IRQ_MASK;
mask &= ~(1 << hwirq);
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
}
static void socrates_fpga_pic_mask_ack(unsigned int virq)
{
unsigned long flags;
unsigned int hwirq;
int irq_line;
u32 mask;
hwirq = socrates_fpga_irq_to_hw(virq);
irq_line = fpga_irqs[hwirq].irq_line;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
& SOCRATES_FPGA_IRQ_MASK;
mask &= ~(1 << hwirq);
mask |= (1 << (hwirq + 16));
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
}
static void socrates_fpga_pic_unmask(unsigned int virq)
{
unsigned long flags;
unsigned int hwirq;
int irq_line;
u32 mask;
hwirq = socrates_fpga_irq_to_hw(virq);
irq_line = fpga_irqs[hwirq].irq_line;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
& SOCRATES_FPGA_IRQ_MASK;
mask |= (1 << hwirq);
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
}
static void socrates_fpga_pic_eoi(unsigned int virq)
{
unsigned long flags;
unsigned int hwirq;
int irq_line;
u32 mask;
hwirq = socrates_fpga_irq_to_hw(virq);
irq_line = fpga_irqs[hwirq].irq_line;
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
& SOCRATES_FPGA_IRQ_MASK;
mask |= (1 << (hwirq + 16));
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
}
static int socrates_fpga_pic_set_type(unsigned int virq,
unsigned int flow_type)
{
unsigned long flags;
unsigned int hwirq;
int polarity;
u32 mask;
hwirq = socrates_fpga_irq_to_hw(virq);
if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
return -EINVAL;
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_LEVEL_HIGH:
polarity = 1;
break;
case IRQ_TYPE_LEVEL_LOW:
polarity = 0;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
if (polarity)
mask |= (1 << hwirq);
else
mask &= ~(1 << hwirq);
socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
return 0;
}
static struct irq_chip socrates_fpga_pic_chip = {
.typename = " FPGA-PIC ",
.ack = socrates_fpga_pic_ack,
.mask = socrates_fpga_pic_mask,
.mask_ack = socrates_fpga_pic_mask_ack,
.unmask = socrates_fpga_pic_unmask,
.eoi = socrates_fpga_pic_eoi,
.set_type = socrates_fpga_pic_set_type,
};
static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
handle_fasteoi_irq);
return 0;
}
static int socrates_fpga_pic_host_xlate(struct irq_host *h,
struct device_node *ct, u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
*out_hwirq = intspec[0];
if (fpga_irq->type == IRQ_TYPE_NONE) {
/* type is configurable */
if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
pr_warning("FPGA PIC: invalid irq type, "
"setting default active low\n");
*out_flags = IRQ_TYPE_LEVEL_LOW;
} else {
*out_flags = intspec[1];
}
} else {
/* type is fixed */
*out_flags = fpga_irq->type;
}
/* Use specified interrupt routing */
if (intspec[2] <= 2)
fpga_irq->irq_line = intspec[2];
else
pr_warning("FPGA PIC: invalid irq routing\n");
return 0;
}
static struct irq_host_ops socrates_fpga_pic_host_ops = {
.map = socrates_fpga_pic_host_map,
.xlate = socrates_fpga_pic_host_xlate,
};
void socrates_fpga_pic_init(struct device_node *pic)
{
unsigned long flags;
int i;
/* Setup an irq_host structure */
socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR,
SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops,
SOCRATES_FPGA_NUM_IRQS);
if (socrates_fpga_pic_irq_host == NULL) {
pr_err("FPGA PIC: Unable to allocate host\n");
return;
}
for (i = 0; i < 3; i++) {
socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
if (socrates_fpga_irqs[i] == NO_IRQ) {
pr_warning("FPGA PIC: can't get irq%d.\n", i);
continue;
}
set_irq_chained_handler(socrates_fpga_irqs[i],
socrates_fpga_pic_cascade);
}
socrates_fpga_pic_iobase = of_iomap(pic, 0);
spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
SOCRATES_FPGA_IRQ_MASK << 16);
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
SOCRATES_FPGA_IRQ_MASK << 16);
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
SOCRATES_FPGA_IRQ_MASK << 16);
spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
}

Просмотреть файл

@ -0,0 +1,16 @@
/*
* Copyright (C) 2008 Ilya Yanok, Emcraft Systems
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef SOCRATES_FPGA_PIC_H
#define SOCRATES_FPGA_PIC_H
void socrates_fpga_pic_init(struct device_node *pic);
#endif

Просмотреть файл

@ -145,6 +145,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
static struct of_device_id __initdata of_bus_ids[] = { static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -153,6 +153,7 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m)
static struct of_device_id __initdata of_bus_ids[] = { static struct of_device_id __initdata of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -194,6 +194,7 @@ static long __init mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = { static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -205,6 +205,7 @@ static long __init mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = { static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -194,6 +194,7 @@ static long __init mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = { static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -46,6 +46,7 @@ static unsigned char *pixis_bdcfg0, *pixis_arch;
static struct of_device_id __initdata mpc8610_ids[] = { static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", }, { .compatible = "fsl,mpc8610-immr", },
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{} {}
}; };

Просмотреть файл

@ -148,6 +148,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = { static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,rapidio-delta", },
{ .compatible = "gianfar", },
{}, {},
}; };

Просмотреть файл

@ -103,6 +103,7 @@ mpc86xx_time_init(void)
static __initdata struct of_device_id of_bus_ids[] = { static __initdata struct of_device_id of_bus_ids[] = {
{ .compatible = "simple-bus", }, { .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}, {},
}; };