diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt new file mode 100644 index 000000000000..76786a0f6d3d --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt @@ -0,0 +1,54 @@ +Microchip LAN78xx Gigabit Ethernet controller + +The LAN78XX devices are usually configured by programming their OTP or with +an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither. +The Device Tree properties, if present, override the OTP and EEPROM. + +Required properties: +- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850". + +Optional properties: +- local-mac-address: see ethernet.txt +- mac-address: see ethernet.txt + +Optional properties of the embedded PHY: +- microchip,led-modes: a 0..4 element vector, with each element configuring + the operating mode of an LED. Omitted LEDs are turned off. Allowed values + are defined in "include/dt-bindings/net/microchip-lan78xx.h". + +Example: + +/* Based on the configuration for a Raspberry Pi 3 B+ */ +&usb { + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usb-port@1 { + compatible = "usb424,2514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: ethernet@1 { + compatible = "usb424,7800"; + reg = <1>; + local-mac-address = [ 00 11 22 33 44 55 ]; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; + }; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index a7321687cae9..81465707d8a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14571,7 +14571,9 @@ M: Woojung Huh M: Microchip Linux Driver Support L: netdev@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/net/microchip,lan78xx.txt F: drivers/net/usb/lan78xx.* +F: include/dt-bindings/net/microchip-lan78xx.h USB MASS STORAGE DRIVER M: Alan Stern diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index 0f293ef28935..ef5e160fe9dc 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #define DRIVER_AUTHOR "WOOJUNG HUH " #define DRIVER_DESC "Microchip LAN88XX PHY driver" @@ -70,6 +72,8 @@ static int lan88xx_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct lan88xx_priv *priv; + u32 led_modes[4]; + int len; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -77,6 +81,27 @@ static int lan88xx_probe(struct phy_device *phydev) priv->wolopts = 0; + len = of_property_read_variable_u32_array(dev->of_node, + "microchip,led-modes", + led_modes, + 0, + ARRAY_SIZE(led_modes)); + if (len >= 0) { + u32 reg = 0; + int i; + + for (i = 0; i < len; i++) { + if (led_modes[i] > 15) + return -EINVAL; + reg |= led_modes[i] << (i * 4); + } + for (; i < ARRAY_SIZE(led_modes); i++) + reg |= LAN78XX_FORCE_LED_OFF << (i * 4); + (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg); + } else if (len == -EOVERFLOW) { + return -EINVAL; + } + /* these values can be used to identify internal PHY */ priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID); priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV); diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 0867f7275852..6b03b973083e 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include #include "lan78xx.h" #define DRIVER_AUTHOR "WOOJUNG HUH " @@ -1652,34 +1654,31 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev) addr[5] = (addr_hi >> 8) & 0xFF; if (!is_valid_ether_addr(addr)) { - /* reading mac address from EEPROM or OTP */ - if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, - addr) == 0) || - (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN, - addr) == 0)) { - if (is_valid_ether_addr(addr)) { - /* eeprom values are valid so use them */ - netif_dbg(dev, ifup, dev->net, - "MAC address read from EEPROM"); - } else { - /* generate random MAC */ - random_ether_addr(addr); - netif_dbg(dev, ifup, dev->net, - "MAC address set to random addr"); - } - - addr_lo = addr[0] | (addr[1] << 8) | - (addr[2] << 16) | (addr[3] << 24); - addr_hi = addr[4] | (addr[5] << 8); - - ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo); - ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi); + if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) { + /* valid address present in Device Tree */ + netif_dbg(dev, ifup, dev->net, + "MAC address read from Device Tree"); + } else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, + ETH_ALEN, addr) == 0) || + (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, + ETH_ALEN, addr) == 0)) && + is_valid_ether_addr(addr)) { + /* eeprom values are valid so use them */ + netif_dbg(dev, ifup, dev->net, + "MAC address read from EEPROM"); } else { /* generate random MAC */ random_ether_addr(addr); netif_dbg(dev, ifup, dev->net, "MAC address set to random addr"); } + + addr_lo = addr[0] | (addr[1] << 8) | + (addr[2] << 16) | (addr[3] << 24); + addr_hi = addr[4] | (addr[5] << 8); + + ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo); + ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi); } ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo); @@ -1762,6 +1761,7 @@ done: static int lan78xx_mdio_init(struct lan78xx_net *dev) { + struct device_node *node; int ret; dev->mdiobus = mdiobus_alloc(); @@ -1790,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev) break; } - ret = mdiobus_register(dev->mdiobus); + node = of_get_child_by_name(dev->udev->dev.of_node, "mdio"); + if (node) { + ret = of_mdiobus_register(dev->mdiobus, node); + of_node_put(node); + } else { + ret = mdiobus_register(dev->mdiobus); + } if (ret) { netdev_err(dev->net, "can't register MDIO bus\n"); goto exit1; @@ -2079,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev) mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control); phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv); + if (phydev->mdio.dev.of_node) { + u32 reg; + int len; + + len = of_property_count_elems_of_size(phydev->mdio.dev.of_node, + "microchip,led-modes", + sizeof(u32)); + if (len >= 0) { + /* Ensure the appropriate LEDs are enabled */ + lan78xx_read_reg(dev, HW_CFG, ®); + reg &= ~(HW_CFG_LED0_EN_ | + HW_CFG_LED1_EN_ | + HW_CFG_LED2_EN_ | + HW_CFG_LED3_EN_); + reg |= (len > 0) * HW_CFG_LED0_EN_ | + (len > 1) * HW_CFG_LED1_EN_ | + (len > 2) * HW_CFG_LED2_EN_ | + (len > 3) * HW_CFG_LED3_EN_; + lan78xx_write_reg(dev, HW_CFG, reg); + } + } + genphy_config_aneg(phydev); dev->fc_autoneg = phydev->autoneg; diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h new file mode 100644 index 000000000000..0742ff075307 --- /dev/null +++ b/include/dt-bindings/net/microchip-lan78xx.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H +#define _DT_BINDINGS_MICROCHIP_LAN78XX_H + +/* LED modes for LAN7800/LAN7850 embedded PHY */ + +#define LAN78XX_LINK_ACTIVITY 0 +#define LAN78XX_LINK_1000_ACTIVITY 1 +#define LAN78XX_LINK_100_ACTIVITY 2 +#define LAN78XX_LINK_10_ACTIVITY 3 +#define LAN78XX_LINK_100_1000_ACTIVITY 4 +#define LAN78XX_LINK_10_1000_ACTIVITY 5 +#define LAN78XX_LINK_10_100_ACTIVITY 6 +#define LAN78XX_DUPLEX_COLLISION 8 +#define LAN78XX_COLLISION 9 +#define LAN78XX_ACTIVITY 10 +#define LAN78XX_AUTONEG_FAULT 12 +#define LAN78XX_FORCE_LED_OFF 14 +#define LAN78XX_FORCE_LED_ON 15 + +#endif diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h index eb492d47f717..8e4015e7f8d3 100644 --- a/include/linux/microchipphy.h +++ b/include/linux/microchipphy.h @@ -70,4 +70,7 @@ #define LAN88XX_MMD3_CHIP_ID (32877) #define LAN88XX_MMD3_CHIP_REV (32878) +/* Registers specific to the LAN7800/LAN7850 embedded phy */ +#define LAN78XX_PHY_LED_MODE_SELECT (0x1D) + #endif /* _MICROCHIPPHY_H */