USB: serial: remove unneeded number endpoints settings

The usb-serial core no longer checks these fields so remove them from
all of the individual drivers.  They will be removed from the usb-serial
core in a patch later in the series.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/airprime.c

@@ -306,9 +306,6 @@ static struct usb_serial_driver airprime_device = {
 	},
 	.usb_driver =		&airprime_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.open =			airprime_open,
 	.close =		airprime_close,
 	.write =		airprime_write,

drivers/usb/serial/ark3116.c

@@ -447,9 +447,6 @@ static struct usb_serial_driver ark3116_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver =		&ark3116_driver,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.attach =		ark3116_attach,
 	.set_termios =		ark3116_set_termios,

drivers/usb/serial/belkin_sa.c

@@ -128,9 +128,6 @@ static struct usb_serial_driver belkin_device = {
 	.description =		"Belkin / Peracom / GoHubs USB Serial Adapter",
 	.usb_driver =		&belkin_driver,
 	.id_table =		id_table_combined,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,

drivers/usb/serial/ch341.c

@@ -318,9 +318,6 @@ static struct usb_serial_driver ch341_device = {
 	},
 	.id_table         = id_table,
 	.usb_driver       = &ch341_driver,
-	.num_interrupt_in = NUM_DONT_CARE,
-	.num_bulk_in      = 1,
-	.num_bulk_out     = 1,
 	.num_ports        = 1,
 	.open             = ch341_open,
 	.set_termios      = ch341_set_termios,

drivers/usb/serial/cp2101.c

@@ -109,9 +109,6 @@ static struct usb_serial_driver cp2101_device = {
 	},
 	.usb_driver		= &cp2101_driver,
 	.id_table		= id_table,
-	.num_interrupt_in	= 0,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
 	.open			= cp2101_open,
 	.close			= cp2101_close,

drivers/usb/serial/cyberjack.c

@@ -90,9 +90,6 @@ static struct usb_serial_driver cyberjack_device = {
 	.description =		"Reiner SCT Cyberjack USB card reader",
 	.usb_driver = 		&cyberjack_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.attach =		cyberjack_startup,
 	.shutdown =		cyberjack_shutdown,

drivers/usb/serial/cypress_m8.c

@@ -200,10 +200,6 @@ static struct usb_serial_driver cypress_earthmate_device = {
 	.description =			"DeLorme Earthmate USB",
 	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_earthmate,
-	.num_interrupt_in = 		1,
-	.num_interrupt_out =		1,
-	.num_bulk_in =			NUM_DONT_CARE,
-	.num_bulk_out =			NUM_DONT_CARE,
 	.num_ports =			1,
 	.attach =			cypress_earthmate_startup,
 	.shutdown =			cypress_shutdown,
@@ -230,10 +226,6 @@ static struct usb_serial_driver cypress_hidcom_device = {
 	.description =			"HID->COM RS232 Adapter",
 	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_cyphidcomrs232,
-	.num_interrupt_in =		1,
-	.num_interrupt_out =		1,
-	.num_bulk_in =			NUM_DONT_CARE,
-	.num_bulk_out =			NUM_DONT_CARE,
 	.num_ports =			1,
 	.attach =			cypress_hidcom_startup,
 	.shutdown =			cypress_shutdown,
@@ -260,10 +252,6 @@ static struct usb_serial_driver cypress_ca42v2_device = {
 	.description =			"Nokia CA-42 V2 Adapter",
 	.usb_driver = 			&cypress_driver,
 	.id_table =			id_table_nokiaca42v2,
-	.num_interrupt_in =		1,
-	.num_interrupt_out =		1,
-	.num_bulk_in =			NUM_DONT_CARE,
-	.num_bulk_out =			NUM_DONT_CARE,
 	.num_ports =			1,
 	.attach =			cypress_ca42v2_startup,
 	.shutdown =			cypress_shutdown,

drivers/usb/serial/digi_acceleport.c

@@ -508,9 +508,6 @@ static struct usb_serial_driver digi_acceleport_2_device = {
 	.description =			"Digi 2 port USB adapter",
 	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_2,
-	.num_interrupt_in =		0,
-	.num_bulk_in =			4,
-	.num_bulk_out =			4,
 	.num_ports =			3,
 	.open =				digi_open,
 	.close =			digi_close,
@@ -538,9 +535,6 @@ static struct usb_serial_driver digi_acceleport_4_device = {
 	.description =			"Digi 4 port USB adapter",
 	.usb_driver = 			&digi_driver,
 	.id_table =			id_table_4,
-	.num_interrupt_in =		0,
-	.num_bulk_in =			5,
-	.num_bulk_out =			5,
 	.num_ports =			4,
 	.open =				digi_open,
 	.close =			digi_close,

drivers/usb/serial/empeg.c

@@ -118,9 +118,6 @@ static struct usb_serial_driver empeg_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver = 		&empeg_driver,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			empeg_open,
 	.close =		empeg_close,

drivers/usb/serial/ftdi_sio.c

@@ -439,9 +439,6 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.description =		"FTDI USB Serial Device",
 	.usb_driver = 		&ftdi_driver ,
 	.id_table =		id_table_combined,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.probe =		ftdi_sio_probe,
 	.port_probe =		ftdi_sio_port_probe,

drivers/usb/serial/funsoft.c

@@ -39,9 +39,6 @@ static struct usb_serial_driver funsoft_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver = 		&funsoft_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 };
 

drivers/usb/serial/garmin_gps.c

@@ -1579,9 +1579,6 @@ static struct usb_serial_driver garmin_device = {
 	.description         = "Garmin GPS usb/tty",
 	.usb_driver          = &garmin_driver,
 	.id_table            = id_table,
-	.num_interrupt_in    = 1,
-	.num_bulk_in         = 1,
-	.num_bulk_out        = 1,
 	.num_ports           = 1,
 	.open                = garmin_open,
 	.close               = garmin_close,

drivers/usb/serial/generic.c

@@ -62,9 +62,6 @@ struct usb_serial_driver usb_serial_generic_device = {
 	},
 	.id_table =		generic_device_ids,
 	.usb_driver = 		&generic_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.shutdown =		usb_serial_generic_shutdown,
 	.throttle =		usb_serial_generic_throttle,

drivers/usb/serial/hp4x.c

@@ -50,9 +50,6 @@ static struct usb_serial_driver hp49gp_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver = 		&hp49gp_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 };
 

drivers/usb/serial/io_tables.h

@@ -111,9 +111,6 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.description		= "Edgeport 2 port adapter",
 	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 2,
 	.open			= edge_open,
 	.close			= edge_close,
@@ -142,9 +139,6 @@ static struct usb_serial_driver edgeport_4port_device = {
 	.description		= "Edgeport 4 port adapter",
 	.usb_driver		= &io_driver,
 	.id_table		= edgeport_4port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 4,
 	.open			= edge_open,
 	.close			= edge_close,
@@ -173,9 +167,6 @@ static struct usb_serial_driver edgeport_8port_device = {
 	.description		= "Edgeport 8 port adapter",
 	.usb_driver		= &io_driver,
 	.id_table		= edgeport_8port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 8,
 	.open			= edge_open,
 	.close			= edge_close,
@@ -203,9 +194,6 @@ static struct usb_serial_driver epic_device = {
 	},
 	.description		= "EPiC device",
 	.id_table		= Epic_port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.open			= edge_open,
 	.close			= edge_close,

drivers/usb/serial/io_ti.c

@@ -3032,9 +3032,6 @@ static struct usb_serial_driver edgeport_1port_device = {
 	.description		= "Edgeport TI 1 port adapter",
 	.usb_driver		= &io_driver,
 	.id_table		= edgeport_1port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.open			= edge_open,
 	.close			= edge_close,
@@ -3064,9 +3061,6 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.description		= "Edgeport TI 2 port adapter",
 	.usb_driver		= &io_driver,
 	.id_table		= edgeport_2port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 2,
-	.num_bulk_out		= 2,
 	.num_ports		= 2,
 	.open			= edge_open,
 	.close			= edge_close,

drivers/usb/serial/ipaq.c

@@ -570,9 +570,6 @@ static struct usb_serial_driver ipaq_device = {
 	.description =		"PocketPC PDA",
 	.usb_driver = 		&ipaq_driver,
 	.id_table =		ipaq_id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		2,
 	.open =			ipaq_open,
 	.close =		ipaq_close,

drivers/usb/serial/ipw.c

@@ -448,9 +448,6 @@ static struct usb_serial_driver ipw_device = {
 	.description =		"IPWireless converter",
 	.usb_driver = 		&usb_ipw_driver,
 	.id_table =		usb_ipw_ids,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			ipw_open,
 	.close =		ipw_close,

drivers/usb/serial/ir-usb.c

@@ -145,9 +145,6 @@ static struct usb_serial_driver ir_device = {
 	.description =		"IR Dongle",
 	.usb_driver = 		&ir_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.set_termios =		ir_set_termios,
 	.attach =		ir_startup,

drivers/usb/serial/iuu_phoenix.c

@@ -1162,9 +1162,6 @@ static struct usb_serial_driver iuu_device = {
 		   .name = "iuu_phoenix",
 		   },
 	.id_table = id_table,
-	.num_interrupt_in = NUM_DONT_CARE,
-	.num_bulk_in = 1,
-	.num_bulk_out = 1,
 	.num_ports = 1,
 	.open = iuu_open,
 	.close = iuu_close,

drivers/usb/serial/keyspan.h

@@ -636,10 +636,6 @@ static struct usb_serial_driver keyspan_pre_device = {
 	},
 	.description		= "Keyspan - (without firmware)",
 	.id_table		= keyspan_pre_ids,
-	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_interrupt_out	= NUM_DONT_CARE,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
 	.attach			= keyspan_fake_startup,
 };
@@ -651,10 +647,6 @@ static struct usb_serial_driver keyspan_1port_device = {
 	},
 	.description		= "Keyspan 1 port adapter",
 	.id_table		= keyspan_1port_ids,
-	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_interrupt_out	= NUM_DONT_CARE,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
@@ -679,10 +671,6 @@ static struct usb_serial_driver keyspan_2port_device = {
 	},
 	.description		= "Keyspan 2 port adapter",
 	.id_table		= keyspan_2port_ids,
-	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_interrupt_out	= NUM_DONT_CARE,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 2,
 	.open			= keyspan_open,
 	.close			= keyspan_close,
@@ -707,10 +695,6 @@ static struct usb_serial_driver keyspan_4port_device = {
 	},
 	.description		= "Keyspan 4 port adapter",
 	.id_table		= keyspan_4port_ids,
-	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_interrupt_out	= NUM_DONT_CARE,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 4,
 	.open			= keyspan_open,
 	.close			= keyspan_close,

drivers/usb/serial/keyspan_pda.c

@@ -793,9 +793,6 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
 	.description =		"Keyspan PDA - (prerenumeration)",
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.attach =		keyspan_pda_fake_startup,
 };
@@ -810,9 +807,6 @@ static struct usb_serial_driver xircom_pgs_fake_device = {
 	.description =		"Xircom / Entregra PGS - (prerenumeration)",
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_fake_xircom,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.attach =		keyspan_pda_fake_startup,
 };
@@ -826,9 +820,6 @@ static struct usb_serial_driver keyspan_pda_device = {
 	.description =		"Keyspan PDA",
 	.usb_driver = 		&keyspan_pda_driver,
 	.id_table =		id_table_std,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		0,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			keyspan_pda_open,
 	.close =		keyspan_pda_close,

drivers/usb/serial/kl5kusb105.c

@@ -126,9 +126,6 @@ static struct usb_serial_driver kl5kusb105d_device = {
 	.description =	     "KL5KUSB105D / PalmConnect",
 	.usb_driver =	     &kl5kusb105d_driver,
 	.id_table =	     id_table,
-	.num_interrupt_in =  1,
-	.num_bulk_in =	     1,
-	.num_bulk_out =	     1,
 	.num_ports =	     1,
 	.open =		     klsi_105_open,
 	.close =	     klsi_105_close,

drivers/usb/serial/kobil_sct.c

@@ -113,10 +113,6 @@ static struct usb_serial_driver kobil_device = {
 	.description =		"KOBIL USB smart card terminal",
 	.usb_driver = 		&kobil_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_interrupt_out = 	NUM_DONT_CARE,
-	.num_bulk_in =		0,
-	.num_bulk_out =		0,
 	.num_ports =		1,
 	.attach =		kobil_startup,
 	.shutdown =		kobil_shutdown,

drivers/usb/serial/mct_u232.c

@@ -143,9 +143,6 @@ static struct usb_serial_driver mct_u232_device = {
 	.description =	     "MCT U232",
 	.usb_driver = 	     &mct_u232_driver,
 	.id_table =	     id_table_combined,
-	.num_interrupt_in =  2,
-	.num_bulk_in =	     0,
-	.num_bulk_out =	     1,
 	.num_ports =	     1,
 	.open =		     mct_u232_open,
 	.close =	     mct_u232_close,

drivers/usb/serial/mos7720.c

@@ -1596,9 +1596,6 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.description		= "Moschip 2 port adapter",
 	.usb_driver		= &usb_driver,
 	.id_table		= moschip_port_id_table,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 2,
-	.num_bulk_out		= 2,
 	.num_ports		= 2,
 	.open			= mos7720_open,
 	.close			= mos7720_close,

drivers/usb/serial/mos7840.c

@@ -2800,12 +2800,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.description = DRIVER_DESC,
 	.usb_driver = &io_driver,
 	.id_table = moschip_port_id_table,
-	.num_interrupt_in = 1,	//NUM_DONT_CARE,//1,
-#ifdef check
-	.num_bulk_in = 4,
-	.num_bulk_out = 4,
 	.num_ports = 4,
-#endif
 	.open = mos7840_open,
 	.close = mos7840_close,
 	.write = mos7840_write,

drivers/usb/serial/navman.c

@@ -121,9 +121,6 @@ static struct usb_serial_driver navman_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver =		&navman_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.open =			navman_open,
 	.close = 		navman_close,

drivers/usb/serial/omninet.c

@@ -95,9 +95,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.description =		"ZyXEL - omni.net lcd plus usb",
 	.usb_driver =		&omninet_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		2,
 	.num_ports =		1,
 	.attach =		omninet_attach,
 	.open =			omninet_open,

drivers/usb/serial/option.c

@@ -325,9 +325,6 @@ static struct usb_serial_driver option_1port_device = {
 	.description       = "GSM modem (1-port)",
 	.usb_driver        = &option_driver,
 	.id_table          = option_ids,
-	.num_interrupt_in  = NUM_DONT_CARE,
-	.num_bulk_in       = NUM_DONT_CARE,
-	.num_bulk_out      = NUM_DONT_CARE,
 	.num_ports         = 1,
 	.open              = option_open,
 	.close             = option_close,

drivers/usb/serial/oti6858.c

@@ -179,9 +179,6 @@ static struct usb_serial_driver oti6858_device = {
 		.name =		"oti6858",
 	},
 	.id_table =		id_table,
-	.num_interrupt_in =	1,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			oti6858_open,
 	.close =		oti6858_close,

drivers/usb/serial/pl2303.c

@@ -1114,9 +1114,6 @@ static struct usb_serial_driver pl2303_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver = 		&pl2303_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			pl2303_open,
 	.close =		pl2303_close,

drivers/usb/serial/safe_serial.c

@@ -394,9 +394,6 @@ static struct usb_serial_driver safe_device = {
 	},
 	.id_table =		id_table,
 	.usb_driver =		&safe_driver,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.write =		safe_write,
 	.write_room =		safe_write_room,

drivers/usb/serial/sierra.c

@@ -746,9 +746,6 @@ static struct usb_serial_driver sierra_device = {
 	.description       = "Sierra USB modem",
 	.id_table          = id_table,
 	.usb_driver        = &sierra_driver,
-	.num_interrupt_in  = NUM_DONT_CARE,
-	.num_bulk_in       = NUM_DONT_CARE,
-	.num_bulk_out      = NUM_DONT_CARE,
 	.calc_num_ports	   = sierra_calc_num_ports,
 	.probe		   = sierra_probe,
 	.open              = sierra_open,

drivers/usb/serial/spcp8x5.c

@@ -1022,9 +1022,6 @@ static struct usb_serial_driver spcp8x5_device = {
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
-	.num_interrupt_in 	= NUM_DONT_CARE,
-	.num_bulk_in 		= 1,
-	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.open 			= spcp8x5_open,
 	.close 			= spcp8x5_close,

drivers/usb/serial/ti_usb_3410_5052.c

@@ -264,9 +264,6 @@ static struct usb_serial_driver ti_1port_device = {
 	.description		= "TI USB 3410 1 port adapter",
 	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
-	.num_interrupt_in	= NUM_DONT_CARE,
-	.num_bulk_in		= NUM_DONT_CARE,
-	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.attach			= ti_startup,
 	.shutdown		= ti_shutdown,
@@ -295,9 +292,6 @@ static struct usb_serial_driver ti_2port_device = {
 	.description		= "TI USB 5052 2 port adapter",
 	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_5052,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 2,
-	.num_bulk_out		= 2,
 	.num_ports		= 2,
 	.attach			= ti_startup,
 	.shutdown		= ti_shutdown,

drivers/usb/serial/usb_debug.c

@@ -35,9 +35,6 @@ static struct usb_serial_driver debug_device = {
 		.name =		"debug",
 	},
 	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 };
 

drivers/usb/serial/visor.c

@@ -189,9 +189,6 @@ static struct usb_serial_driver handspring_device = {
 	.description =		"Handspring Visor / Palm OS",
 	.usb_driver =		&visor_driver,
 	.id_table =		id_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		2,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		2,
 	.open =			visor_open,
 	.close =		visor_close,
@@ -219,9 +216,6 @@ static struct usb_serial_driver clie_5_device = {
 	.description =		"Sony Clie 5.0",
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_5_table,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		2,
-	.num_bulk_out =		2,
 	.num_ports =		2,
 	.open =			visor_open,
 	.close =		visor_close,
@@ -249,9 +243,6 @@ static struct usb_serial_driver clie_3_5_device = {
 	.description =		"Sony Clie 3.5",
 	.usb_driver =		&visor_driver,
 	.id_table =		clie_id_3_5_table,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
 	.num_ports =		1,
 	.open =			visor_open,
 	.close =		visor_close,

drivers/usb/serial/whiteheat.c

@@ -164,9 +164,6 @@ static struct usb_serial_driver whiteheat_fake_device = {
 	.description =		"Connect Tech - WhiteHEAT - (prerenumeration)",
 	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_prerenumeration,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		1,
 	.probe =		whiteheat_firmware_download,
 	.attach =		whiteheat_firmware_attach,
@@ -180,9 +177,6 @@ static struct usb_serial_driver whiteheat_device = {
 	.description =		"Connect Tech - WhiteHEAT",
 	.usb_driver =		&whiteheat_driver,
 	.id_table =		id_table_std,
-	.num_interrupt_in =	NUM_DONT_CARE,
-	.num_bulk_in =		NUM_DONT_CARE,
-	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		4,
 	.attach =		whiteheat_attach,
 	.shutdown =		whiteheat_shutdown,