net: cpsw: Add am33xx MACID readout
This patch adds a function to get the MACIDs from the am33xx SoC control module registers which hold unique vendor MACIDs. This is only used if of_get_mac_address() fails to get a valid mac address. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Родитель
56fdb2e046
Коммит
0ba517b18a
|
@ -24,6 +24,8 @@ Optional properties:
|
|||
- ti,hwmods : Must be "cpgmac0"
|
||||
- no_bd_ram : Must be 0 or 1
|
||||
- dual_emac : Specifies Switch to act as Dual EMAC
|
||||
- syscon : Phandle to the system control device node, which is
|
||||
the control module device of the am33x
|
||||
|
||||
Slave Properties:
|
||||
Required properties:
|
||||
|
@ -57,6 +59,7 @@ Examples:
|
|||
active_slave = <0>;
|
||||
cpts_clock_mult = <0x80000000>;
|
||||
cpts_clock_shift = <29>;
|
||||
syscon = <&cm>;
|
||||
cpsw_emac0: slave@0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "rgmii-txid";
|
||||
|
@ -85,6 +88,7 @@ Examples:
|
|||
active_slave = <0>;
|
||||
cpts_clock_mult = <0x80000000>;
|
||||
cpts_clock_shift = <29>;
|
||||
syscon = <&cm>;
|
||||
cpsw_emac0: slave@0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "rgmii-txid";
|
||||
|
|
|
@ -62,6 +62,8 @@ config TI_CPSW
|
|||
select TI_DAVINCI_CPDMA
|
||||
select TI_DAVINCI_MDIO
|
||||
select TI_CPSW_PHY_SEL
|
||||
select MFD_SYSCON
|
||||
select REGMAP
|
||||
---help---
|
||||
This driver supports TI's CPSW Ethernet Switch.
|
||||
|
||||
|
|
|
@ -33,6 +33,8 @@
|
|||
#include <linux/of_net.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/if_vlan.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include <linux/pinctrl/consumer.h>
|
||||
|
||||
|
@ -1876,6 +1878,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
|
|||
slave->port_vlan = data->dual_emac_res_vlan;
|
||||
}
|
||||
|
||||
#define AM33XX_CTRL_MAC_LO_REG(id) (0x630 + 0x8 * id)
|
||||
#define AM33XX_CTRL_MAC_HI_REG(id) (0x630 + 0x8 * id + 0x4)
|
||||
|
||||
static int cpsw_am33xx_cm_get_macid(struct device *dev, int slave,
|
||||
u8 *mac_addr)
|
||||
{
|
||||
u32 macid_lo;
|
||||
u32 macid_hi;
|
||||
struct regmap *syscon;
|
||||
|
||||
syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
|
||||
if (IS_ERR(syscon)) {
|
||||
if (PTR_ERR(syscon) == -ENODEV)
|
||||
return 0;
|
||||
return PTR_ERR(syscon);
|
||||
}
|
||||
|
||||
regmap_read(syscon, AM33XX_CTRL_MAC_LO_REG(slave), &macid_lo);
|
||||
regmap_read(syscon, AM33XX_CTRL_MAC_HI_REG(slave), &macid_hi);
|
||||
|
||||
mac_addr[5] = (macid_lo >> 8) & 0xff;
|
||||
mac_addr[4] = macid_lo & 0xff;
|
||||
mac_addr[3] = (macid_hi >> 24) & 0xff;
|
||||
mac_addr[2] = (macid_hi >> 16) & 0xff;
|
||||
mac_addr[1] = (macid_hi >> 8) & 0xff;
|
||||
mac_addr[0] = macid_hi & 0xff;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cpsw_probe_dt(struct cpsw_platform_data *data,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
|
@ -1988,8 +2020,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
|
|||
PHY_ID_FMT, mdio->name, phyid);
|
||||
|
||||
mac_addr = of_get_mac_address(slave_node);
|
||||
if (mac_addr)
|
||||
if (mac_addr) {
|
||||
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
|
||||
} else {
|
||||
if (of_machine_is_compatible("ti,am33xx")) {
|
||||
ret = cpsw_am33xx_cm_get_macid(&pdev->dev, i,
|
||||
slave_data->mac_addr);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
slave_data->phy_if = of_get_phy_mode(slave_node);
|
||||
if (slave_data->phy_if < 0) {
|
||||
|
|
Загрузка…
Ссылка в новой задаче