[SCSI] sun3x_esp: convert to esp_scsi

Converted sun3x_esp driver to use esp_scsi.c

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This commit is contained in:
Thomas Bogendoerfer 2008-02-01 00:13:34 +01:00 коммит произвёл James Bottomley
Родитель f8d9d654fc
Коммит 0bb67f1818
3 изменённых файлов: 265 добавлений и 340 удалений

Просмотреть файл

@ -1779,6 +1779,7 @@ config SUN3_SCSI
config SUN3X_ESP config SUN3X_ESP
bool "Sun3x ESP SCSI" bool "Sun3x ESP SCSI"
depends on SUN3X && SCSI=y depends on SUN3X && SCSI=y
select SCSI_SPI_ATTRS
help help
The ESP was an on-board SCSI controller used on Sun 3/80 The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it. machines. Say Y here to compile in support for it.

Просмотреть файл

@ -118,7 +118,7 @@ obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
obj-$(CONFIG_SCSI_PPA) += ppa.o obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o obj-$(CONFIG_SCSI_IMM) += imm.o
obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o obj-$(CONFIG_SUN3X_ESP) += esp_scsi.o sun3x_esp.o
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o obj-$(CONFIG_SCSI_SNI_53C710) += 53c700.o sni_53c710.o
obj-$(CONFIG_SCSI_NSP32) += nsp32.o obj-$(CONFIG_SCSI_NSP32) += nsp32.o

Просмотреть файл

@ -1,392 +1,316 @@
/* sun3x_esp.c: EnhancedScsiProcessor Sun3x SCSI driver code. /* sun3x_esp.c: ESP front-end for Sun3x systems.
* *
* (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de) * Copyright (C) 2007,2008 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
* Based on David S. Miller's esp driver
*/ */
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/types.h> #include <linux/types.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "NCR53C9x.h"
#include <asm/sun3x.h> #include <asm/sun3x.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/dvma.h> #include <asm/dvma.h>
#include <asm/irq.h>
static void dma_barrier(struct NCR_ESP *esp); /* DMA controller reg offsets */
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count); #define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp); #define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
static void dma_drain(struct NCR_ESP *esp); #define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
static void dma_invalidate(struct NCR_ESP *esp); #define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
static void dma_dump_state(struct NCR_ESP *esp);
static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length);
static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length);
static void dma_ints_off(struct NCR_ESP *esp);
static void dma_ints_on(struct NCR_ESP *esp);
static int dma_irq_p(struct NCR_ESP *esp);
static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr);
static int dma_ports_p(struct NCR_ESP *esp);
static void dma_reset(struct NCR_ESP *esp);
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write);
static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp);
static void dma_advance_sg (Scsi_Cmnd *sp);
/* Detecting ESP chips on the machine. This is the simple and easy #include <scsi/scsi_host.h>
* version.
#include "esp_scsi.h"
#define DRV_MODULE_NAME "sun3x_esp"
#define PFX DRV_MODULE_NAME ": "
#define DRV_VERSION "1.000"
#define DRV_MODULE_RELDATE "Nov 1, 2007"
/*
* m68k always assumes readl/writel operate on little endian
* mmio space; this is wrong at least for Sun3x, so we
* need to workaround this until a proper way is found
*/ */
int sun3x_esp_detect(struct scsi_host_template *tpnt) #if 0
#define dma_read32(REG) \
readl(esp->dma_regs + (REG))
#define dma_write32(VAL, REG) \
writel((VAL), esp->dma_regs + (REG))
#else
#define dma_read32(REG) \
*(volatile u32 *)(esp->dma_regs + (REG))
#define dma_write32(VAL, REG) \
do { *(volatile u32 *)(esp->dma_regs + (REG)) = (VAL); } while (0)
#endif
static void sun3x_esp_write8(struct esp *esp, u8 val, unsigned long reg)
{ {
struct NCR_ESP *esp; writeb(val, esp->regs + (reg * 4UL));
struct ConfigDev *esp_dev; }
esp_dev = 0; static u8 sun3x_esp_read8(struct esp *esp, unsigned long reg)
esp = esp_allocate(tpnt, esp_dev, 0); {
return readb(esp->regs + (reg * 4UL));
}
/* Do command transfer with DMA */ static dma_addr_t sun3x_esp_map_single(struct esp *esp, void *buf,
esp->do_pio_cmds = 0; size_t sz, int dir)
{
return dma_map_single(esp->dev, buf, sz, dir);
}
/* Required functions */ static int sun3x_esp_map_sg(struct esp *esp, struct scatterlist *sg,
esp->dma_bytes_sent = &dma_bytes_sent; int num_sg, int dir)
esp->dma_can_transfer = &dma_can_transfer; {
esp->dma_dump_state = &dma_dump_state; return dma_map_sg(esp->dev, sg, num_sg, dir);
esp->dma_init_read = &dma_init_read; }
esp->dma_init_write = &dma_init_write;
esp->dma_ints_off = &dma_ints_off;
esp->dma_ints_on = &dma_ints_on;
esp->dma_irq_p = &dma_irq_p;
esp->dma_ports_p = &dma_ports_p;
esp->dma_setup = &dma_setup;
/* Optional functions */ static void sun3x_esp_unmap_single(struct esp *esp, dma_addr_t addr,
esp->dma_barrier = &dma_barrier; size_t sz, int dir)
esp->dma_invalidate = &dma_invalidate; {
esp->dma_drain = &dma_drain; dma_unmap_single(esp->dev, addr, sz, dir);
esp->dma_irq_entry = 0; }
esp->dma_irq_exit = 0;
esp->dma_led_on = 0;
esp->dma_led_off = 0;
esp->dma_poll = &dma_poll;
esp->dma_reset = &dma_reset;
/* virtual DMA functions */ static void sun3x_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
esp->dma_mmu_get_scsi_one = &dma_mmu_get_scsi_one; int num_sg, int dir)
esp->dma_mmu_get_scsi_sgl = &dma_mmu_get_scsi_sgl; {
esp->dma_mmu_release_scsi_one = &dma_mmu_release_scsi_one; dma_unmap_sg(esp->dev, sg, num_sg, dir);
esp->dma_mmu_release_scsi_sgl = &dma_mmu_release_scsi_sgl; }
esp->dma_advance_sg = &dma_advance_sg;
/* SCSI chip speed */ static int sun3x_esp_irq_pending(struct esp *esp)
esp->cfreq = 20000000; {
esp->eregs = (struct ESP_regs *)(SUN3X_ESP_BASE); if (dma_read32(DMA_CSR) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
esp->dregs = (void *)SUN3X_ESP_DMA; return 1;
esp->esp_command = (volatile unsigned char *)dvma_malloc(DVMA_PAGE_SIZE);
esp->esp_command_dvma = dvma_vtob((unsigned long)esp->esp_command);
esp->irq = 2;
if (request_irq(esp->irq, esp_intr, IRQF_DISABLED,
"SUN3X SCSI", esp->ehost)) {
esp_deallocate(esp);
return 0; return 0;
}
esp->scsi_id = 7;
esp->diff = 0;
esp_initialize(esp);
/* for reasons beyond my knowledge (and which should likely be fixed)
sync mode doesn't work on a 3/80 at 5mhz. but it does at 4. */
esp->sync_defp = 0x3f;
printk("ESP: Total of %d ESP hosts found, %d actually in use.\n", nesps,
esps_in_use);
esps_running = esps_in_use;
return esps_in_use;
} }
static void dma_do_drain(struct NCR_ESP *esp) static void sun3x_esp_reset_dma(struct esp *esp)
{ {
struct sparc_dma_registers *dregs = u32 val;
(struct sparc_dma_registers *) esp->dregs;
int count = 500000; val = dma_read32(DMA_CSR);
dma_write32(val | DMA_RST_SCSI, DMA_CSR);
dma_write32(val & ~DMA_RST_SCSI, DMA_CSR);
while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) /* Enable interrupts. */
val = dma_read32(DMA_CSR);
dma_write32(val | DMA_INT_ENAB, DMA_CSR);
}
static void sun3x_esp_dma_drain(struct esp *esp)
{
u32 csr;
int lim;
csr = dma_read32(DMA_CSR);
if (!(csr & DMA_FIFO_ISDRAIN))
return;
dma_write32(csr | DMA_FIFO_STDRAIN, DMA_CSR);
lim = 1000;
while (dma_read32(DMA_CSR) & DMA_FIFO_ISDRAIN) {
if (--lim == 0) {
printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n",
esp->host->unique_id);
break;
}
udelay(1); udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
} }
}
dregs->cond_reg |= DMA_FIFO_STDRAIN; static void sun3x_esp_dma_invalidate(struct esp *esp)
{
u32 val;
int lim;
count = 500000; lim = 1000;
while ((val = dma_read32(DMA_CSR)) & DMA_PEND_READ) {
while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0)) if (--lim == 0) {
printk(KERN_ALERT PFX "esp%d: DMA will not "
"invalidate!\n", esp->host->unique_id);
break;
}
udelay(1); udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
} }
val &= ~(DMA_ENABLE | DMA_ST_WRITE | DMA_BCNT_ENAB);
val |= DMA_FIFO_INV;
dma_write32(val, DMA_CSR);
val &= ~DMA_FIFO_INV;
dma_write32(val, DMA_CSR);
} }
static void dma_barrier(struct NCR_ESP *esp) static void sun3x_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
u32 dma_count, int write, u8 cmd)
{ {
struct sparc_dma_registers *dregs = u32 csr;
(struct sparc_dma_registers *) esp->dregs;
int count = 500000;
while((dregs->cond_reg & DMA_PEND_READ) && (--count > 0)) BUG_ON(!(cmd & ESP_CMD_DMA));
udelay(1);
if(!count) { sun3x_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg); sun3x_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
} csr = dma_read32(DMA_CSR);
csr |= DMA_ENABLE;
if (write)
csr |= DMA_ST_WRITE;
else
csr &= ~DMA_ST_WRITE;
dma_write32(csr, DMA_CSR);
dma_write32(addr, DMA_ADDR);
dregs->cond_reg &= ~(DMA_ENABLE); scsi_esp_cmd(esp, cmd);
} }
/* This uses various DMA csr fields and the fifo flags count value to static int sun3x_esp_dma_error(struct esp *esp)
* determine how many bytes were successfully sent/received by the ESP.
*/
static int dma_bytes_sent(struct NCR_ESP *esp, int fifo_count)
{ {
struct sparc_dma_registers *dregs = u32 csr = dma_read32(DMA_CSR);
(struct sparc_dma_registers *) esp->dregs;
int rval = dregs->st_addr - esp->esp_command_dvma; if (csr & DMA_HNDL_ERROR)
return rval - fifo_count;
}
static int dma_can_transfer(struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
return sp->SCp.this_residual;
}
static void dma_drain(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
int count = 500000;
if(dregs->cond_reg & DMA_FIFO_ISDRAIN) {
dregs->cond_reg |= DMA_FIFO_STDRAIN;
while((dregs->cond_reg & DMA_FIFO_ISDRAIN) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
}
}
static void dma_invalidate(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
__u32 tmp;
int count = 500000;
while(((tmp = dregs->cond_reg) & DMA_PEND_READ) && (--count > 0))
udelay(1);
if(!count) {
printk("%s:%d timeout CSR %08lx\n", __FILE__, __LINE__, dregs->cond_reg);
}
dregs->cond_reg = tmp | DMA_FIFO_INV;
dregs->cond_reg &= ~DMA_FIFO_INV;
}
static void dma_dump_state(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
ESPLOG(("esp%d: dma -- cond_reg<%08lx> addr<%08lx>\n",
esp->esp_id, dregs->cond_reg, dregs->st_addr));
}
static void dma_init_read(struct NCR_ESP *esp, __u32 vaddress, int length)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
dregs->st_addr = vaddress;
dregs->cond_reg |= (DMA_ST_WRITE | DMA_ENABLE);
}
static void dma_init_write(struct NCR_ESP *esp, __u32 vaddress, int length)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
/* Set up the DMA counters */
dregs->st_addr = vaddress;
dregs->cond_reg = ((dregs->cond_reg & ~(DMA_ST_WRITE)) | DMA_ENABLE);
}
static void dma_ints_off(struct NCR_ESP *esp)
{
DMA_INTSOFF((struct sparc_dma_registers *) esp->dregs);
}
static void dma_ints_on(struct NCR_ESP *esp)
{
DMA_INTSON((struct sparc_dma_registers *) esp->dregs);
}
static int dma_irq_p(struct NCR_ESP *esp)
{
return DMA_IRQ_P((struct sparc_dma_registers *) esp->dregs);
}
static void dma_poll(struct NCR_ESP *esp, unsigned char *vaddr)
{
int count = 50;
dma_do_drain(esp);
/* Wait till the first bits settle. */
while((*(volatile unsigned char *)vaddr == 0xff) && (--count > 0))
udelay(1);
if(!count) {
// printk("%s:%d timeout expire (data %02x)\n", __FILE__, __LINE__,
// esp_read(esp->eregs->esp_fdata));
//mach_halt();
vaddr[0] = esp_read(esp->eregs->esp_fdata);
vaddr[1] = esp_read(esp->eregs->esp_fdata);
}
}
static int dma_ports_p(struct NCR_ESP *esp)
{
return (((struct sparc_dma_registers *) esp->dregs)->cond_reg
& DMA_INT_ENAB);
}
/* Resetting various pieces of the ESP scsi driver chipset/buses. */
static void dma_reset(struct NCR_ESP *esp)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *)esp->dregs;
/* Punt the DVMA into a known state. */
dregs->cond_reg |= DMA_RST_SCSI;
dregs->cond_reg &= ~(DMA_RST_SCSI);
DMA_INTSON(dregs);
}
static void dma_setup(struct NCR_ESP *esp, __u32 addr, int count, int write)
{
struct sparc_dma_registers *dregs =
(struct sparc_dma_registers *) esp->dregs;
unsigned long nreg = dregs->cond_reg;
// printk("dma_setup %c addr %08x cnt %08x\n",
// write ? 'W' : 'R', addr, count);
dma_do_drain(esp);
if(write)
nreg |= DMA_ST_WRITE;
else {
nreg &= ~(DMA_ST_WRITE);
}
nreg |= DMA_ENABLE;
dregs->cond_reg = nreg;
dregs->st_addr = addr;
}
static void dma_mmu_get_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
sp->SCp.have_data_in = dvma_map((unsigned long)sp->SCp.buffer,
sp->SCp.this_residual);
sp->SCp.ptr = (char *)((unsigned long)sp->SCp.have_data_in);
}
static void dma_mmu_get_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
int sz = sp->SCp.buffers_residual;
struct scatterlist *sg = sp->SCp.buffer;
while (sz >= 0) {
sg[sz].dma_address = dvma_map((unsigned long)sg_virt(&sg[sz]),
sg[sz].length);
sz--;
}
sp->SCp.ptr=(char *)((unsigned long)sp->SCp.buffer->dma_address);
}
static void dma_mmu_release_scsi_one (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
dvma_unmap((char *)sp->SCp.have_data_in);
}
static void dma_mmu_release_scsi_sgl (struct NCR_ESP *esp, Scsi_Cmnd *sp)
{
int sz = sp->use_sg - 1;
struct scatterlist *sg = (struct scatterlist *)sp->request_buffer;
while(sz >= 0) {
dvma_unmap((char *)sg[sz].dma_address);
sz--;
}
}
static void dma_advance_sg (Scsi_Cmnd *sp)
{
sp->SCp.ptr = (char *)((unsigned long)sp->SCp.buffer->dma_address);
}
static int sun3x_esp_release(struct Scsi_Host *instance)
{
/* this code does not support being compiled as a module */
return 1; return 1;
return 0;
} }
static struct scsi_host_template driver_template = { static const struct esp_driver_ops sun3x_esp_ops = {
.proc_name = "sun3x_esp", .esp_write8 = sun3x_esp_write8,
.proc_info = &esp_proc_info, .esp_read8 = sun3x_esp_read8,
.name = "Sun ESP 100/100a/200", .map_single = sun3x_esp_map_single,
.detect = sun3x_esp_detect, .map_sg = sun3x_esp_map_sg,
.release = sun3x_esp_release, .unmap_single = sun3x_esp_unmap_single,
.slave_alloc = esp_slave_alloc, .unmap_sg = sun3x_esp_unmap_sg,
.slave_destroy = esp_slave_destroy, .irq_pending = sun3x_esp_irq_pending,
.info = esp_info, .reset_dma = sun3x_esp_reset_dma,
.queuecommand = esp_queue, .dma_drain = sun3x_esp_dma_drain,
.eh_abort_handler = esp_abort, .dma_invalidate = sun3x_esp_dma_invalidate,
.eh_bus_reset_handler = esp_reset, .send_dma_cmd = sun3x_esp_send_dma_cmd,
.can_queue = 7, .dma_error = sun3x_esp_dma_error,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
}; };
static int __devinit esp_sun3x_probe(struct platform_device *dev)
{
struct scsi_host_template *tpnt = &scsi_esp_template;
struct Scsi_Host *host;
struct esp *esp;
struct resource *res;
int err = -ENOMEM;
#include "scsi_module.c" host = scsi_host_alloc(tpnt, sizeof(struct esp));
if (!host)
goto fail;
host->max_id = 8;
esp = shost_priv(host);
esp->host = host;
esp->dev = dev;
esp->ops = &sun3x_esp_ops;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!res && !res->start)
goto fail_unlink;
esp->regs = ioremap_nocache(res->start, 0x20);
if (!esp->regs)
goto fail_unmap_regs;
res = platform_get_resource(dev, IORESOURCE_MEM, 1);
if (!res && !res->start)
goto fail_unmap_regs;
esp->dma_regs = ioremap_nocache(res->start, 0x10);
esp->command_block = dma_alloc_coherent(esp->dev, 16,
&esp->command_block_dma,
GFP_KERNEL);
if (!esp->command_block)
goto fail_unmap_regs_dma;
host->irq = platform_get_irq(dev, 0);
err = request_irq(host->irq, scsi_esp_intr, IRQF_SHARED,
"SUN3X ESP", esp);
if (err < 0)
goto fail_unmap_command_block;
esp->scsi_id = 7;
esp->host->this_id = esp->scsi_id;
esp->scsi_id_mask = (1 << esp->scsi_id);
esp->cfreq = 20000000;
dev_set_drvdata(&dev->dev, esp);
err = scsi_esp_register(esp, &dev->dev);
if (err)
goto fail_free_irq;
return 0;
fail_free_irq:
free_irq(host->irq, esp);
fail_unmap_command_block:
dma_free_coherent(esp->dev, 16,
esp->command_block,
esp->command_block_dma);
fail_unmap_regs_dma:
iounmap(esp->dma_regs);
fail_unmap_regs:
iounmap(esp->regs);
fail_unlink:
scsi_host_put(host);
fail:
return err;
}
static int __devexit esp_sun3x_remove(struct platform_device *dev)
{
struct esp *esp = dev_get_drvdata(&dev->dev);
unsigned int irq = esp->host->irq;
u32 val;
scsi_esp_unregister(esp);
/* Disable interrupts. */
val = dma_read32(DMA_CSR);
dma_write32(val & ~DMA_INT_ENAB, DMA_CSR);
free_irq(irq, esp);
dma_free_coherent(esp->dev, 16,
esp->command_block,
esp->command_block_dma);
scsi_host_put(esp->host);
return 0;
}
static struct platform_driver esp_sun3x_driver = {
.probe = esp_sun3x_probe,
.remove = __devexit_p(esp_sun3x_remove),
.driver = {
.name = "sun3x_esp",
},
};
static int __init sun3x_esp_init(void)
{
return platform_driver_register(&esp_sun3x_driver);
}
static void __exit sun3x_esp_exit(void)
{
platform_driver_unregister(&esp_sun3x_driver);
}
MODULE_DESCRIPTION("Sun3x ESP SCSI driver");
MODULE_AUTHOR("Thomas Bogendoerfer (tsbogend@alpha.franken.de)");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
module_init(sun3x_esp_init);
module_exit(sun3x_esp_exit);