gpio: gpio driver for max7301 SPI GPIO expander
Maxim's MAX7301 is an SPI GPIO expander with 28 GPIOs. Note: MAX7301's interrupt feature is not supported yet. [akpm@linux-foundation.org: coding-style fixes] [g.liakhovetski@pengutronix.de: Fix inaccuracies in comments, check spi_setup() return code, mask off high byte in max7301_read()] Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Juergen Beisert
Linus Torvalds
Родитель
6519108746
Коммит
0c36ec3147
|
|
@ -69,6 +69,12 @@ config GPIO_PCF857X
|
|||
|
||||
comment "SPI GPIO expanders:"
|
||||
|
||||
config GPIO_MAX7301
|
||||
tristate "Maxim MAX7301 GPIO expander"
|
||||
depends on SPI_MASTER
|
||||
help
|
||||
gpio driver for Maxim MAX7301 SPI GPIO expander.
|
||||
|
||||
config GPIO_MCP23S08
|
||||
tristate "Microchip MCP23S08 I/O expander"
|
||||
depends on SPI_MASTER
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
|
|||
|
||||
obj-$(CONFIG_HAVE_GPIO_LIB) += gpiolib.o
|
||||
|
||||
obj-$(CONFIG_GPIO_MAX7301) += max7301.o
|
||||
obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o
|
||||
obj-$(CONFIG_GPIO_PCA953X) += pca953x.o
|
||||
obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,339 @@
|
|||
/**
|
||||
* drivers/gpio/max7301.c
|
||||
*
|
||||
* Copyright (C) 2006 Juergen Beisert, Pengutronix
|
||||
* Copyright (C) 2008 Guennadi Liakhovetski, Pengutronix
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* The Maxim's MAX7301 device is an SPI driven GPIO expander. There are
|
||||
* 28 GPIOs. 8 of them can trigger an interrupt. See datasheet for more
|
||||
* details
|
||||
* Note:
|
||||
* - DIN must be stable at the rising edge of clock.
|
||||
* - when writing:
|
||||
* - always clock in 16 clocks at once
|
||||
* - at DIN: D15 first, D0 last
|
||||
* - D0..D7 = databyte, D8..D14 = commandbyte
|
||||
* - D15 = low -> write command
|
||||
* - when reading
|
||||
* - always clock in 16 clocks at once
|
||||
* - at DIN: D15 first, D0 last
|
||||
* - D0..D7 = dummy, D8..D14 = register address
|
||||
* - D15 = high -> read command
|
||||
* - raise CS and assert it again
|
||||
* - always clock in 16 clocks at once
|
||||
* - at DOUT: D15 first, D0 last
|
||||
* - D0..D7 contains the data from the first cycle
|
||||
*
|
||||
* The driver exports a standard gpiochip interface
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/max7301.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#define DRIVER_NAME "max7301"
|
||||
|
||||
/*
|
||||
* Pin configurations, see MAX7301 datasheet page 6
|
||||
*/
|
||||
#define PIN_CONFIG_MASK 0x03
|
||||
#define PIN_CONFIG_IN_PULLUP 0x03
|
||||
#define PIN_CONFIG_IN_WO_PULLUP 0x02
|
||||
#define PIN_CONFIG_OUT 0x01
|
||||
|
||||
#define PIN_NUMBER 28
|
||||
|
||||
|
||||
/*
|
||||
* Some registers must be read back to modify.
|
||||
* To save time we cache them here in memory
|
||||
*/
|
||||
struct max7301 {
|
||||
struct mutex lock;
|
||||
u8 port_config[8]; /* field 0 is unused */
|
||||
u32 out_level; /* cached output levels */
|
||||
struct gpio_chip chip;
|
||||
struct spi_device *spi;
|
||||
};
|
||||
|
||||
/**
|
||||
* max7301_write - Write a new register content
|
||||
* @spi: The SPI device
|
||||
* @reg: Register offset
|
||||
* @val: Value to write
|
||||
*
|
||||
* A write to the MAX7301 means one message with one transfer
|
||||
*
|
||||
* Returns 0 if successful or a negative value on error
|
||||
*/
|
||||
static int max7301_write(struct spi_device *spi, unsigned int reg, unsigned int val)
|
||||
{
|
||||
u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
|
||||
return spi_write(spi, (const u8 *)&word, sizeof(word));
|
||||
}
|
||||
|
||||
/**
|
||||
* max7301_read - Read back register content
|
||||
* @spi: The SPI device
|
||||
* @reg: Register offset
|
||||
*
|
||||
* A read from the MAX7301 means two transfers; here, one message each
|
||||
*
|
||||
* Returns positive 8 bit value from device if successful or a
|
||||
* negative value on error
|
||||
*/
|
||||
static int max7301_read(struct spi_device *spi, unsigned int reg)
|
||||
{
|
||||
int ret;
|
||||
u16 word;
|
||||
|
||||
word = 0x8000 | (reg << 8);
|
||||
ret = spi_write(spi, (const u8 *)&word, sizeof(word));
|
||||
if (ret)
|
||||
return ret;
|
||||
/*
|
||||
* This relies on the fact, that a transfer with NULL tx_buf shifts out
|
||||
* zero bytes (=NOOP for MAX7301)
|
||||
*/
|
||||
ret = spi_read(spi, (u8 *)&word, sizeof(word));
|
||||
if (ret)
|
||||
return ret;
|
||||
return word & 0xff;
|
||||
}
|
||||
|
||||
static int max7301_direction_input(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
||||
u8 *config;
|
||||
int ret;
|
||||
|
||||
/* First 4 pins are unused in the controller */
|
||||
offset += 4;
|
||||
|
||||
config = &ts->port_config[offset >> 2];
|
||||
|
||||
mutex_lock(&ts->lock);
|
||||
|
||||
/* Standard GPIO API doesn't support pull-ups, has to be extended.
|
||||
* Hard-coding no pollup for now. */
|
||||
*config = (*config & ~(3 << (offset & 3))) | (1 << (offset & 3));
|
||||
|
||||
ret = max7301_write(ts->spi, 0x08 + (offset >> 2), *config);
|
||||
|
||||
mutex_unlock(&ts->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __max7301_set(struct max7301 *ts, unsigned offset, int value)
|
||||
{
|
||||
if (value) {
|
||||
ts->out_level |= 1 << offset;
|
||||
return max7301_write(ts->spi, 0x20 + offset, 0x01);
|
||||
} else {
|
||||
ts->out_level &= ~(1 << offset);
|
||||
return max7301_write(ts->spi, 0x20 + offset, 0x00);
|
||||
}
|
||||
}
|
||||
|
||||
static int max7301_direction_output(struct gpio_chip *chip, unsigned offset,
|
||||
int value)
|
||||
{
|
||||
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
||||
u8 *config;
|
||||
int ret;
|
||||
|
||||
/* First 4 pins are unused in the controller */
|
||||
offset += 4;
|
||||
|
||||
config = &ts->port_config[offset >> 2];
|
||||
|
||||
mutex_lock(&ts->lock);
|
||||
|
||||
*config = (*config & ~(3 << (offset & 3))) | (1 << (offset & 3));
|
||||
|
||||
ret = __max7301_set(ts, offset, value);
|
||||
|
||||
if (!ret)
|
||||
ret = max7301_write(ts->spi, 0x08 + (offset >> 2), *config);
|
||||
|
||||
mutex_unlock(&ts->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max7301_get(struct gpio_chip *chip, unsigned offset)
|
||||
{
|
||||
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
||||
int config, level = -EINVAL;
|
||||
|
||||
/* First 4 pins are unused in the controller */
|
||||
offset += 4;
|
||||
|
||||
mutex_lock(&ts->lock);
|
||||
|
||||
config = (ts->port_config[offset >> 2] >> ((offset & 3) * 2)) & 3;
|
||||
|
||||
switch (config) {
|
||||
case 1:
|
||||
/* Output: return cached level */
|
||||
level = !!(ts->out_level & (1 << offset));
|
||||
break;
|
||||
case 2:
|
||||
case 3:
|
||||
/* Input: read out */
|
||||
level = max7301_read(ts->spi, 0x20 + offset) & 0x01;
|
||||
}
|
||||
mutex_unlock(&ts->lock);
|
||||
|
||||
return level;
|
||||
}
|
||||
|
||||
static void max7301_set(struct gpio_chip *chip, unsigned offset, int value)
|
||||
{
|
||||
struct max7301 *ts = container_of(chip, struct max7301, chip);
|
||||
|
||||
/* First 4 pins are unused in the controller */
|
||||
offset += 4;
|
||||
|
||||
mutex_lock(&ts->lock);
|
||||
|
||||
__max7301_set(ts, offset, value);
|
||||
|
||||
mutex_unlock(&ts->lock);
|
||||
}
|
||||
|
||||
static int __devinit max7301_probe(struct spi_device *spi)
|
||||
{
|
||||
struct max7301 *ts;
|
||||
struct max7301_platform_data *pdata;
|
||||
int i, ret;
|
||||
|
||||
pdata = spi->dev.platform_data;
|
||||
if (!pdata || !pdata->base)
|
||||
return -ENODEV;
|
||||
|
||||
/*
|
||||
* bits_per_word cannot be configured in platform data
|
||||
*/
|
||||
spi->bits_per_word = 16;
|
||||
|
||||
ret = spi_setup(spi);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ts = kzalloc(sizeof(struct max7301), GFP_KERNEL);
|
||||
if (!ts)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&ts->lock);
|
||||
|
||||
dev_set_drvdata(&spi->dev, ts);
|
||||
|
||||
/* Power up the chip and disable IRQ output */
|
||||
max7301_write(spi, 0x04, 0x01);
|
||||
|
||||
ts->spi = spi;
|
||||
|
||||
ts->chip.label = DRIVER_NAME,
|
||||
|
||||
ts->chip.direction_input = max7301_direction_input;
|
||||
ts->chip.get = max7301_get;
|
||||
ts->chip.direction_output = max7301_direction_output;
|
||||
ts->chip.set = max7301_set;
|
||||
|
||||
ts->chip.base = pdata->base;
|
||||
ts->chip.ngpio = PIN_NUMBER;
|
||||
ts->chip.can_sleep = 1;
|
||||
ts->chip.dev = &spi->dev;
|
||||
ts->chip.owner = THIS_MODULE;
|
||||
|
||||
ret = gpiochip_add(&ts->chip);
|
||||
if (ret)
|
||||
goto exit_destroy;
|
||||
|
||||
/*
|
||||
* tristate all pins in hardware and cache the
|
||||
* register values for later use.
|
||||
*/
|
||||
for (i = 1; i < 8; i++) {
|
||||
int j;
|
||||
/* 0xAA means input with internal pullup disabled */
|
||||
max7301_write(spi, 0x08 + i, 0xAA);
|
||||
ts->port_config[i] = 0xAA;
|
||||
for (j = 0; j < 4; j++) {
|
||||
int idx = ts->chip.base + (i - 1) * 4 + j;
|
||||
ret = gpio_direction_input(idx);
|
||||
if (ret)
|
||||
goto exit_remove;
|
||||
gpio_free(idx);
|
||||
}
|
||||
}
|
||||
return ret;
|
||||
|
||||
exit_remove:
|
||||
gpiochip_remove(&ts->chip);
|
||||
exit_destroy:
|
||||
dev_set_drvdata(&spi->dev, NULL);
|
||||
mutex_destroy(&ts->lock);
|
||||
kfree(ts);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max7301_remove(struct spi_device *spi)
|
||||
{
|
||||
struct max7301 *ts;
|
||||
int ret;
|
||||
|
||||
ts = dev_get_drvdata(&spi->dev);
|
||||
if (ts == NULL)
|
||||
return -ENODEV;
|
||||
|
||||
dev_set_drvdata(&spi->dev, NULL);
|
||||
|
||||
/* Power down the chip and disable IRQ output */
|
||||
max7301_write(spi, 0x04, 0x00);
|
||||
|
||||
ret = gpiochip_remove(&ts->chip);
|
||||
if (!ret) {
|
||||
mutex_destroy(&ts->lock);
|
||||
kfree(ts);
|
||||
} else
|
||||
dev_err(&spi->dev, "Failed to remove the GPIO controller: %d\n",
|
||||
ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct spi_driver max7301_driver = {
|
||||
.driver = {
|
||||
.name = DRIVER_NAME,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = max7301_probe,
|
||||
.remove = __devexit_p(max7301_remove),
|
||||
};
|
||||
|
||||
static int __init max7301_init(void)
|
||||
{
|
||||
return spi_register_driver(&max7301_driver);
|
||||
}
|
||||
|
||||
static void __exit max7301_exit(void)
|
||||
{
|
||||
spi_unregister_driver(&max7301_driver);
|
||||
}
|
||||
|
||||
module_init(max7301_init);
|
||||
module_exit(max7301_exit);
|
||||
|
||||
MODULE_AUTHOR("Juergen Beisert");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_DESCRIPTION("MAX7301 SPI based GPIO-Expander");
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
#ifndef LINUX_SPI_MAX7301_H
|
||||
#define LINUX_SPI_MAX7301_H
|
||||
|
||||
struct max7301_platform_data {
|
||||
/* number assigned to the first GPIO */
|
||||
unsigned base;
|
||||
};
|
||||
|
||||
#endif
|
||||
Загрузка…
Ссылка в новой задаче