* acpi-assorted:
  ACPI / osl: Kill macro INVALID_TABLE().
  earlycpio.c: Fix the confusing comment of find_cpio_data().
  ACPI / x86: Print Hot-Pluggable Field in SRAT.
  ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number
  ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c
  ACPI / thermal: Remove the unused lock of struct acpi_thermal
  ACPI / osl: Fix osi_setup_entries[] __initdata attribute location
  ACPI / numa: Fix __init attribute location in slit_valid()
  ACPI / dock: Fix __init attribute location in find_dock_and_bay()
  ACPI / Sleep: Fix incorrect placement of __initdata
  ACPI / processor: Fix incorrect placement of __initdata
  ACPI / EC: Fix incorrect placement of __initdata
  ACPI / scan: Drop unnecessary label from acpi_create_platform_device()
  ACPI: Move acpi_bus_get_device() from bus.c to scan.c
  ACPI / scan: Allow platform device creation without any IO resources
  ACPI: Cleanup sparse warning on acpi_os_initialize1()
  platform / thinkpad: Remove deprecated hotkey_report_mode parameter
  ACPI: Remove the old /proc/acpi/event interface
This commit is contained in:
Rafael J. Wysocki 2013-08-27 01:29:04 +02:00
Родитель afdca01c98 7702ae0dd9
Коммит 0c581415b5
34 изменённых файлов: 105 добавлений и 495 удалений

Просмотреть файл

@ -8,8 +8,8 @@ http://acpi4asus.sf.net/
This driver provides support for extra features of ACPI-compatible ASUS laptops.
It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
VICTOR XP7210 for example). It makes all the extra buttons generate standard
ACPI events that go through /proc/acpi/events and input events (like keyboards).
VICTOR XP7210 for example). It makes all the extra buttons generate input
events (like keyboards).
On some models adds support for changing the display brightness and output,
switching the LCD backlight on and off, and most importantly, allows you to
blink those fancy LEDs intended for reporting mail and wireless status.
@ -55,8 +55,8 @@ Usage
DSDT) to me.
That's all, now, all the events generated by the hotkeys of your laptop
should be reported in your /proc/acpi/event entry. You can check with
"acpi_listen".
should be reported via netlink events. You can check with
"acpi_genl monitor" (part of the acpica project).
Hotkeys are also reported as input keys (like keyboards) you can check
which key are supported using "xev" under X11.

Просмотреть файл

@ -12,10 +12,10 @@ Fn keys (hotkeys):
------------------
Some models report hotkeys through the SNC or SPIC devices, such events are
reported both through the ACPI subsystem as acpi events and through the INPUT
subsystem. See the logs of acpid or /proc/acpi/event and
/proc/bus/input/devices to find out what those events are and which input
devices are created by the driver. Additionally, loading the driver with the
debug option will report all events in the kernel log.
subsystem. See the logs of /proc/bus/input/devices to find out what those
events are and which input devices are created by the driver.
Additionally, loading the driver with the debug option will report all events
in the kernel log.
The "scancodes" passed to the input system (that can be remapped with udev)
are indexes to the table "sony_laptop_input_keycode_map" in the sony-laptop.c

Просмотреть файл

@ -329,20 +329,6 @@ sysfs notes:
This attribute has poll()/select() support.
hotkey_report_mode:
Returns the state of the procfs ACPI event report mode
filter for hot keys. If it is set to 1 (the default),
all hot key presses are reported both through the input
layer and also as ACPI events through procfs (but not
through netlink). If it is set to 2, hot key presses
are reported only through the input layer.
This attribute is read-only in kernels 2.6.23 or later,
and read-write on earlier kernels.
May return -EPERM (write access locked out by module
parameter) or -EACCES (read-only).
wakeup_reason:
Set to 1 if the system is waking up because the user
requested a bay ejection. Set to 2 if the system is
@ -518,24 +504,21 @@ SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hotkey ACPI HKEY event map:
-------------------------------
Events that are not propagated by the driver, except for legacy
compatibility purposes when hotkey_report_mode is set to 1:
0x5001 Lid closed
0x5002 Lid opened
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x7000 Radio Switch may have changed state
Events that are never propagated by the driver:
0x2304 System is waking up from suspend to undock
0x2305 System is waking up from suspend to eject bay
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
0x5001 Lid closed
0x5002 Lid opened
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x5010 Brightness level changed/control event
0x6000 KEYBOARD: Numlock key pressed
0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED)
0x7000 Radio Switch may have changed state
Events that are propagated by the driver to userspace:
@ -574,50 +557,6 @@ operating system is to force either an immediate suspend or hibernate
cycle, or a system shutdown. Obviously, something is very wrong if this
happens.
Compatibility notes:
ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
supported the input layer, and sent events over the procfs ACPI event
interface.
To avoid sending duplicate events over the input layer and the ACPI
event interface, thinkpad-acpi 0.16 implements a module parameter
(hotkey_report_mode), and also a sysfs device attribute with the same
name.
Make no mistake here: userspace is expected to switch to using the input
layer interface of thinkpad-acpi, together with the ACPI netlink event
interface in kernels 2.6.23 and later, or with the ACPI procfs event
interface in kernels 2.6.22 and earlier.
If no hotkey_report_mode module parameter is specified (or it is set to
zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
and earlier, also allows one to change the hotkey_report_mode through
sysfs. In kernels 2.6.23 and later, where the netlink ACPI event
interface is available, hotkey_report_mode cannot be changed through
sysfs (it is read-only).
If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
be changed later through sysfs (any writes will return -EPERM to signal
that hotkey_report_mode was locked. On 2.6.23 and later, where
hotkey_report_mode cannot be changed at all, writes will return -EACCES).
hotkey_report_mode set to 1 makes the driver export through the procfs
ACPI event interface all hot key presses (which are *also* sent to the
input layer). This is a legacy compatibility behaviour, and it is also
the default mode of operation for the driver.
hotkey_report_mode set to 2 makes the driver filter out the hot key
presses from the procfs ACPI event interface, so these events will only
be sent through the input layer. Userspace that has been updated to use
the thinkpad-acpi input layer interface should set hotkey_report_mode to
2.
Hot key press events are never sent to the ACPI netlink event interface.
Really up-to-date userspace under kernel 2.6.23 and later is to use the
netlink interface and the input layer interface, and don't bother at all
with hotkey_report_mode.
Brightness hotkey notes:

Просмотреть файл

@ -146,6 +146,7 @@ int __init
acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
u64 start, end;
u32 hotpluggable;
int node, pxm;
if (srat_disabled())
@ -154,7 +155,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
goto out_err_bad_srat;
if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
goto out_err;
if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
if (hotpluggable && !save_add_info())
goto out_err;
start = ma->base_address;
@ -174,9 +176,10 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
node_set(node, numa_nodes_parsed);
printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1);
pr_info("SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx]%s\n",
node, pxm,
(unsigned long long) start, (unsigned long long) end - 1,
hotpluggable ? " hotplug" : "");
return 0;
out_err_bad_srat:

Просмотреть файл

@ -91,24 +91,6 @@ config ACPI_EC_DEBUGFS
Thus this option is a debug option that helps to write ACPI drivers
and can be used to identify ACPI code or EC firmware bugs.
config ACPI_PROC_EVENT
bool "Deprecated /proc/acpi/event support"
depends on PROC_FS
default y
help
A user-space daemon, acpid, typically reads /proc/acpi/event
and handles all ACPI-generated events.
These events are now delivered to user-space either
via the input layer or as netlink events.
This build option enables the old code for legacy
user-space implementation. After some time, this will
be moved under CONFIG_ACPI_PROCFS, and then deleted.
Say Y here to retain the old behaviour. Say N if your
user-space is newer than kernel 2.6.23 (September 2007).
config ACPI_AC
tristate "AC Adapter"
depends on X86

Просмотреть файл

@ -267,7 +267,6 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event)
msleep(ac_sleep_before_get_state_ms);
acpi_ac_get_state(ac);
acpi_bus_generate_proc_event(device, event, (u32) ac->state);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
(u32) ac->state);

Просмотреть файл

@ -452,7 +452,6 @@ static void acpi_pad_notify(acpi_handle handle, u32 event,
switch (event) {
case ACPI_PROCESSOR_AGGREGATOR_NOTIFY:
acpi_pad_handle_notify(handle);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;

Просмотреть файл

@ -52,7 +52,7 @@ int acpi_create_platform_device(struct acpi_device *adev,
struct platform_device_info pdevinfo;
struct resource_list_entry *rentry;
struct list_head resource_list;
struct resource *resources;
struct resource *resources = NULL;
int count;
/* If the ACPI node already has a physical device attached, skip it. */
@ -61,20 +61,22 @@ int acpi_create_platform_device(struct acpi_device *adev,
INIT_LIST_HEAD(&resource_list);
count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
if (count <= 0)
if (count < 0) {
return 0;
} else if (count > 0) {
resources = kmalloc(count * sizeof(struct resource),
GFP_KERNEL);
if (!resources) {
dev_err(&adev->dev, "No memory for resources\n");
acpi_dev_free_resource_list(&resource_list);
return -ENOMEM;
}
count = 0;
list_for_each_entry(rentry, &resource_list, node)
resources[count++] = rentry->res;
resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
if (!resources) {
dev_err(&adev->dev, "No memory for resources\n");
acpi_dev_free_resource_list(&resource_list);
return -ENOMEM;
}
count = 0;
list_for_each_entry(rentry, &resource_list, node)
resources[count++] = rentry->res;
acpi_dev_free_resource_list(&resource_list);
memset(&pdevinfo, 0, sizeof(pdevinfo));
/*

Просмотреть файл

@ -1028,8 +1028,6 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event)
if (event == ACPI_BATTERY_NOTIFY_INFO)
acpi_battery_refresh(battery);
acpi_battery_update(battery);
acpi_bus_generate_proc_event(device, event,
acpi_battery_present(battery));
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
acpi_battery_present(battery));

Просмотреть файл

@ -89,27 +89,6 @@ static struct dmi_system_id dsdt_dmi_table[] __initdata = {
Device Management
-------------------------------------------------------------------------- */
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device)
{
acpi_status status;
if (!device)
return -EINVAL;
/* TBD: Support fixed-feature devices */
status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
if (ACPI_FAILURE(status) || !*device) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
handle));
return -ENODEV;
}
return 0;
}
EXPORT_SYMBOL(acpi_bus_get_device);
acpi_status acpi_bus_get_status_handle(acpi_handle handle,
unsigned long long *sta)
{
@ -345,104 +324,6 @@ static void acpi_bus_osc_support(void)
/* do we need to check other returned cap? Sounds no */
}
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_PROC_EVENT
static DEFINE_SPINLOCK(acpi_bus_event_lock);
LIST_HEAD(acpi_bus_event_list);
DECLARE_WAIT_QUEUE_HEAD(acpi_bus_event_queue);
extern int event_is_open;
int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id, u8 type, int data)
{
struct acpi_bus_event *event;
unsigned long flags;
/* drop event on the floor if no one's listening */
if (!event_is_open)
return 0;
event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
if (!event)
return -ENOMEM;
strcpy(event->device_class, device_class);
strcpy(event->bus_id, bus_id);
event->type = type;
event->data = data;
spin_lock_irqsave(&acpi_bus_event_lock, flags);
list_add_tail(&event->node, &acpi_bus_event_list);
spin_unlock_irqrestore(&acpi_bus_event_lock, flags);
wake_up_interruptible(&acpi_bus_event_queue);
return 0;
}
EXPORT_SYMBOL_GPL(acpi_bus_generate_proc_event4);
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
{
if (!device)
return -EINVAL;
return acpi_bus_generate_proc_event4(device->pnp.device_class,
device->pnp.bus_id, type, data);
}
EXPORT_SYMBOL(acpi_bus_generate_proc_event);
int acpi_bus_receive_event(struct acpi_bus_event *event)
{
unsigned long flags;
struct acpi_bus_event *entry = NULL;
DECLARE_WAITQUEUE(wait, current);
if (!event)
return -EINVAL;
if (list_empty(&acpi_bus_event_list)) {
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&acpi_bus_event_queue, &wait);
if (list_empty(&acpi_bus_event_list))
schedule();
remove_wait_queue(&acpi_bus_event_queue, &wait);
set_current_state(TASK_RUNNING);
if (signal_pending(current))
return -ERESTARTSYS;
}
spin_lock_irqsave(&acpi_bus_event_lock, flags);
if (!list_empty(&acpi_bus_event_list)) {
entry = list_entry(acpi_bus_event_list.next,
struct acpi_bus_event, node);
list_del(&entry->node);
}
spin_unlock_irqrestore(&acpi_bus_event_lock, flags);
if (!entry)
return -ENODEV;
memcpy(event, entry, sizeof(struct acpi_bus_event));
kfree(entry);
return 0;
}
#endif /* CONFIG_ACPI_PROC_EVENT */
/* --------------------------------------------------------------------------
Notification Handling
-------------------------------------------------------------------------- */
@ -695,7 +576,6 @@ static int __init acpi_bus_init(void)
{
int result;
acpi_status status;
extern acpi_status acpi_os_initialize1(void);
acpi_os_initialize1();

Просмотреть файл

@ -303,8 +303,6 @@ static void acpi_button_notify(struct acpi_device *device, u32 event)
pm_wakeup_event(&device->dev, 0);
}
acpi_bus_generate_proc_event(device, event, ++button->pushed);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,

Просмотреть файл

@ -908,7 +908,7 @@ err_unregister:
*
* This is called by acpi_walk_namespace to look for dock stations and bays.
*/
static __init acpi_status
static acpi_status __init
find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
{
if (acpi_dock_match(handle) || is_ejectable_bay(handle))

Просмотреть файл

@ -948,7 +948,7 @@ static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
return 0;
}
static struct dmi_system_id __initdata ec_dmi_table[] = {
static struct dmi_system_id ec_dmi_table[] __initdata = {
{
ec_skip_dsdt_scan, "Compal JFL92", {
DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),

Просмотреть файл

@ -21,100 +21,6 @@
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("event");
#ifdef CONFIG_ACPI_PROC_EVENT
/* Global vars for handling event proc entry */
static DEFINE_SPINLOCK(acpi_system_event_lock);
int event_is_open = 0;
extern struct list_head acpi_bus_event_list;
extern wait_queue_head_t acpi_bus_event_queue;
static int acpi_system_open_event(struct inode *inode, struct file *file)
{
spin_lock_irq(&acpi_system_event_lock);
if (event_is_open)
goto out_busy;
event_is_open = 1;
spin_unlock_irq(&acpi_system_event_lock);
return 0;
out_busy:
spin_unlock_irq(&acpi_system_event_lock);
return -EBUSY;
}
static ssize_t
acpi_system_read_event(struct file *file, char __user * buffer, size_t count,
loff_t * ppos)
{
int result = 0;
struct acpi_bus_event event;
static char str[ACPI_MAX_STRING];
static int chars_remaining = 0;
static char *ptr;
if (!chars_remaining) {
memset(&event, 0, sizeof(struct acpi_bus_event));
if ((file->f_flags & O_NONBLOCK)
&& (list_empty(&acpi_bus_event_list)))
return -EAGAIN;
result = acpi_bus_receive_event(&event);
if (result)
return result;
chars_remaining = sprintf(str, "%s %s %08x %08x\n",
event.device_class ? event.
device_class : "<unknown>",
event.bus_id ? event.
bus_id : "<unknown>", event.type,
event.data);
ptr = str;
}
if (chars_remaining < count) {
count = chars_remaining;
}
if (copy_to_user(buffer, ptr, count))
return -EFAULT;
*ppos += count;
chars_remaining -= count;
ptr += count;
return count;
}
static int acpi_system_close_event(struct inode *inode, struct file *file)
{
spin_lock_irq(&acpi_system_event_lock);
event_is_open = 0;
spin_unlock_irq(&acpi_system_event_lock);
return 0;
}
static unsigned int acpi_system_poll_event(struct file *file, poll_table * wait)
{
poll_wait(file, &acpi_bus_event_queue, wait);
if (!list_empty(&acpi_bus_event_list))
return POLLIN | POLLRDNORM;
return 0;
}
static const struct file_operations acpi_system_event_ops = {
.owner = THIS_MODULE,
.open = acpi_system_open_event,
.read = acpi_system_read_event,
.release = acpi_system_close_event,
.poll = acpi_system_poll_event,
.llseek = default_llseek,
};
#endif /* CONFIG_ACPI_PROC_EVENT */
/* ACPI notifier chain */
static BLOCKING_NOTIFIER_HEAD(acpi_chain_head);
@ -280,9 +186,6 @@ static int acpi_event_genetlink_init(void)
static int __init acpi_event_init(void)
{
#ifdef CONFIG_ACPI_PROC_EVENT
struct proc_dir_entry *entry;
#endif
int error = 0;
if (acpi_disabled)
@ -293,15 +196,6 @@ static int __init acpi_event_init(void)
if (error)
printk(KERN_WARNING PREFIX
"Failed to create genetlink family for ACPI event\n");
#ifdef CONFIG_ACPI_PROC_EVENT
/* 'event' [R] */
entry = proc_create("event", S_IRUSR, acpi_root_dir,
&acpi_system_event_ops);
if (!entry)
return -ENODEV;
#endif
return 0;
}

Просмотреть файл

@ -23,6 +23,7 @@
#define PREFIX "ACPI: "
acpi_status acpi_os_initialize1(void);
int init_acpi_device_notify(void);
int acpi_scan_init(void);
#ifdef CONFIG_ACPI_PCI_SLOT

Просмотреть файл

@ -159,7 +159,7 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header)
* distance than the others.
* Do some quick checks here and only use the SLIT if it passes.
*/
static __init int slit_valid(struct acpi_table_slit *slit)
static int __init slit_valid(struct acpi_table_slit *slit)
{
int i, j;
int d = slit->locality_count;

Просмотреть файл

@ -52,6 +52,7 @@
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
#include "internal.h"
#define _COMPONENT ACPI_OS_SERVICES
ACPI_MODULE_NAME("osl");
@ -566,10 +567,6 @@ static const char * const table_sigs[] = {
ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT, ACPI_SIG_PSDT,
ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, NULL };
/* Non-fatal errors: Affected tables/files are ignored */
#define INVALID_TABLE(x, path, name) \
{ pr_err("ACPI OVERRIDE: " x " [%s%s]\n", path, name); continue; }
#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
/* Must not increase 10 or needs code modification below */
@ -596,9 +593,11 @@ void __init acpi_initrd_override(void *data, size_t size)
data += offset;
size -= offset;
if (file.size < sizeof(struct acpi_table_header))
INVALID_TABLE("Table smaller than ACPI header",
cpio_path, file.name);
if (file.size < sizeof(struct acpi_table_header)) {
pr_err("ACPI OVERRIDE: Table smaller than ACPI header [%s%s]\n",
cpio_path, file.name);
continue;
}
table = file.data;
@ -606,15 +605,21 @@ void __init acpi_initrd_override(void *data, size_t size)
if (!memcmp(table->signature, table_sigs[sig], 4))
break;
if (!table_sigs[sig])
INVALID_TABLE("Unknown signature",
cpio_path, file.name);
if (file.size != table->length)
INVALID_TABLE("File length does not match table length",
cpio_path, file.name);
if (acpi_table_checksum(file.data, table->length))
INVALID_TABLE("Bad table checksum",
cpio_path, file.name);
if (!table_sigs[sig]) {
pr_err("ACPI OVERRIDE: Unknown signature [%s%s]\n",
cpio_path, file.name);
continue;
}
if (file.size != table->length) {
pr_err("ACPI OVERRIDE: File length does not match table length [%s%s]\n",
cpio_path, file.name);
continue;
}
if (acpi_table_checksum(file.data, table->length)) {
pr_err("ACPI OVERRIDE: Bad table checksum [%s%s]\n",
cpio_path, file.name);
continue;
}
pr_info("%4.4s ACPI table found in initrd [%s%s][0x%x]\n",
table->signature, cpio_path, file.name, table->length);
@ -1354,8 +1359,8 @@ struct osi_setup_entry {
bool enable;
};
static struct osi_setup_entry __initdata
osi_setup_entries[OSI_STRING_ENTRIES_MAX] = {
static struct osi_setup_entry
osi_setup_entries[OSI_STRING_ENTRIES_MAX] __initdata = {
{"Module Device", true},
{"Processor Device", true},
{"3.0 _SCP Extensions", true},

Просмотреть файл

@ -28,7 +28,7 @@ static int __init set_no_mwait(const struct dmi_system_id *id)
return 0;
}
static struct dmi_system_id __initdata processor_idle_dmi_table[] = {
static struct dmi_system_id processor_idle_dmi_table[] __initdata = {
{
set_no_mwait, "Extensa 5220", {
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),

Просмотреть файл

@ -91,21 +91,17 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data)
acpi_processor_ppc_has_changed(pr, 1);
if (saved == pr->performance_platform_limit)
break;
acpi_bus_generate_proc_event(device, event,
pr->performance_platform_limit);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
pr->performance_platform_limit);
break;
case ACPI_PROCESSOR_NOTIFY_POWER:
acpi_processor_cst_has_changed(pr);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
case ACPI_PROCESSOR_NOTIFY_THROTTLING:
acpi_processor_tstate_has_changed(pr);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;

Просмотреть файл

@ -873,14 +873,9 @@ static void acpi_sbs_callback(void *context)
u8 saved_charger_state = sbs->charger_present;
u8 saved_battery_state;
acpi_ac_get_present(sbs);
if (sbs->charger_present != saved_charger_state) {
#ifdef CONFIG_ACPI_PROC_EVENT
acpi_bus_generate_proc_event4(ACPI_AC_CLASS, ACPI_AC_DIR_NAME,
ACPI_SBS_NOTIFY_STATUS,
sbs->charger_present);
#endif
if (sbs->charger_present != saved_charger_state)
kobject_uevent(&sbs->charger.dev->kobj, KOBJ_CHANGE);
}
if (sbs->manager_present) {
for (id = 0; id < MAX_SBS_BAT; ++id) {
if (!(sbs->batteries_supported & (1 << id)))
@ -890,12 +885,6 @@ static void acpi_sbs_callback(void *context)
acpi_battery_read(bat);
if (saved_battery_state == bat->present)
continue;
#ifdef CONFIG_ACPI_PROC_EVENT
acpi_bus_generate_proc_event4(ACPI_BATTERY_CLASS,
bat->name,
ACPI_SBS_NOTIFY_STATUS,
bat->present);
#endif
kobject_uevent(&bat->bat.dev->kobj, KOBJ_CHANGE);
}
}

Просмотреть файл

@ -970,6 +970,28 @@ struct bus_type acpi_bus_type = {
.uevent = acpi_device_uevent,
};
static void acpi_bus_data_handler(acpi_handle handle, void *context)
{
/* Intentionally empty. */
}
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device)
{
acpi_status status;
if (!device)
return -EINVAL;
status = acpi_get_data(handle, acpi_bus_data_handler, (void **)device);
if (ACPI_FAILURE(status) || !*device) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No context for object [%p]\n",
handle));
return -ENODEV;
}
return 0;
}
EXPORT_SYMBOL_GPL(acpi_bus_get_device);
int acpi_device_add(struct acpi_device *device,
void (*release)(struct device *))
{
@ -1181,14 +1203,6 @@ acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
}
EXPORT_SYMBOL_GPL(acpi_bus_get_ejd);
void acpi_bus_data_handler(acpi_handle handle, void *context)
{
/* TBD */
return;
}
static int acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
struct acpi_device_wakeup *wakeup)
{

Просмотреть файл

@ -138,7 +138,7 @@ static int __init init_nvs_nosave(const struct dmi_system_id *d)
return 0;
}
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
{
.callback = init_old_suspend_ordering,
.ident = "Abit KN9 (nForce4 variant)",

Просмотреть файл

@ -50,11 +50,6 @@
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
#define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
#define ACPI_THERMAL_FILE_TRIP_POINTS "trip_points"
#define ACPI_THERMAL_FILE_COOLING_MODE "cooling_mode"
#define ACPI_THERMAL_FILE_POLLING_FREQ "polling_frequency"
#define ACPI_THERMAL_NOTIFY_TEMPERATURE 0x80
#define ACPI_THERMAL_NOTIFY_THRESHOLDS 0x81
#define ACPI_THERMAL_NOTIFY_DEVICES 0x82
@ -190,7 +185,6 @@ struct acpi_thermal {
struct thermal_zone_device *thermal_zone;
int tz_enabled;
int kelvin_offset;
struct mutex lock;
};
/* --------------------------------------------------------------------------
@ -759,7 +753,6 @@ static int thermal_notify(struct thermal_zone_device *thermal, int trip,
else
return 0;
acpi_bus_generate_proc_event(tz->device, type, 1);
acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
dev_name(&tz->device->dev), type, 1);
@ -840,12 +833,13 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
if (ACPI_SUCCESS(status) && (dev == device)) {
if (bind)
result = thermal_zone_bind_cooling_device
(thermal, -1, cdev,
THERMAL_NO_LIMIT,
(thermal, THERMAL_TRIPS_NONE,
cdev, THERMAL_NO_LIMIT,
THERMAL_NO_LIMIT);
else
result = thermal_zone_unbind_cooling_device
(thermal, -1, cdev);
(thermal, THERMAL_TRIPS_NONE,
cdev);
if (result)
goto failed;
}
@ -970,14 +964,12 @@ static void acpi_thermal_notify(struct acpi_device *device, u32 event)
case ACPI_THERMAL_NOTIFY_THRESHOLDS:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_THRESHOLDS);
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
case ACPI_THERMAL_NOTIFY_DEVICES:
acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES);
acpi_thermal_check(tz);
acpi_bus_generate_proc_event(device, event, 0);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event, 0);
break;
@ -1091,8 +1083,6 @@ static int acpi_thermal_add(struct acpi_device *device)
strcpy(acpi_device_name(device), ACPI_THERMAL_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_THERMAL_CLASS);
device->driver_data = tz;
mutex_init(&tz->lock);
result = acpi_thermal_get_info(tz);
if (result)
@ -1125,7 +1115,6 @@ static int acpi_thermal_remove(struct acpi_device *device)
tz = acpi_driver_data(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
kfree(tz);
return 0;
}

Просмотреть файл

@ -1550,7 +1550,6 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
switch (event) {
case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch,
* most likely via hotkey. */
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_SWITCHVIDEOMODE;
break;
@ -1558,20 +1557,16 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
* connector. */
acpi_video_device_enumerate(video);
acpi_video_device_rebind(video);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_SWITCHVIDEOMODE;
break;
case ACPI_VIDEO_NOTIFY_CYCLE: /* Cycle Display output hotkey pressed. */
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_SWITCHVIDEOMODE;
break;
case ACPI_VIDEO_NOTIFY_NEXT_OUTPUT: /* Next Display output hotkey pressed. */
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_VIDEO_NEXT;
break;
case ACPI_VIDEO_NOTIFY_PREV_OUTPUT: /* previous Display output hotkey pressed. */
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_VIDEO_PREV;
break;
@ -1614,31 +1609,26 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS: /* Cycle brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESS_CYCLE;
break;
case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS: /* Increase brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSUP;
break;
case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS: /* Decrease brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESSDOWN;
break;
case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS: /* zero brightness */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_BRIGHTNESS_ZERO;
break;
case ACPI_VIDEO_NOTIFY_DISPLAY_OFF: /* display device off */
if (brightness_switch_enabled)
acpi_video_switch_brightness(video_device, event);
acpi_bus_generate_proc_event(device, event, 0);
keycode = KEY_DISPLAY_OFF;
break;
default:

Просмотреть файл

@ -876,11 +876,6 @@ found:
if (useinput)
sonypi_report_input_event(event);
#ifdef CONFIG_ACPI
if (sonypi_acpi_device)
acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event);
#endif
kfifo_in_locked(&sonypi_device.fifo, (unsigned char *)&event,
sizeof(event), &sonypi_device.fifo_lock);
kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN);

Просмотреть файл

@ -270,7 +270,6 @@ static void ibm_handle_events(acpi_handle handle, u32 event, void *context)
if (subevent == 0x80) {
dbg("%s: generationg bus event\n", __func__);
acpi_bus_generate_proc_event(note->device, note->event, detail);
acpi_bus_generate_netlink_event(note->device->pnp.device_class,
dev_name(&note->device->dev),
note->event, detail);

Просмотреть файл

@ -1543,7 +1543,6 @@ static void asus_acpi_notify(struct acpi_device *device, u32 event)
/* TODO Find a better way to handle events count. */
count = asus->event_count[event % 128]++;
acpi_bus_generate_proc_event(asus->device, event, count);
acpi_bus_generate_netlink_event(asus->device->pnp.device_class,
dev_name(&asus->device->dev), event,
count);

Просмотреть файл

@ -1269,7 +1269,6 @@ static void eeepc_acpi_notify(struct acpi_device *device, u32 event)
if (event > ACPI_MAX_SYS_NOTIFY)
return;
count = eeepc->event_count[event % 128]++;
acpi_bus_generate_proc_event(device, event, count);
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
count);

Просмотреть файл

@ -773,8 +773,6 @@ static void acpi_fujitsu_notify(struct acpi_device *device, u32 event)
else
set_lcd_level(newb);
}
acpi_bus_generate_proc_event(fujitsu->dev,
ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, 0);
keycode = KEY_BRIGHTNESSUP;
} else if (oldb > newb) {
if (disable_brightness_adjust != 1) {
@ -783,8 +781,6 @@ static void acpi_fujitsu_notify(struct acpi_device *device, u32 event)
else
set_lcd_level(newb);
}
acpi_bus_generate_proc_event(fujitsu->dev,
ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, 0);
keycode = KEY_BRIGHTNESSDOWN;
}
break;

Просмотреть файл

@ -464,9 +464,6 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
"error getting hotkey status\n"));
return;
}
acpi_bus_generate_proc_event(pcc->device, HKEY_NOTIFY, result);
if (!sparse_keymap_report_event(hotk_input_dev,
result & 0xf, result & 0x80, false))
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,

Просмотреть файл

@ -1275,9 +1275,6 @@ static void sony_nc_notify(struct acpi_device *device, u32 event)
ev_type = HOTKEY;
sony_laptop_report_input_event(real_ev);
}
acpi_bus_generate_proc_event(sony_nc_acpi_device, ev_type, real_ev);
acpi_bus_generate_netlink_event(sony_nc_acpi_device->pnp.device_class,
dev_name(&sony_nc_acpi_device->dev), ev_type, real_ev);
}
@ -4246,7 +4243,6 @@ static irqreturn_t sony_pic_irq(int irq, void *dev_id)
found:
sony_laptop_report_input_event(device_event);
acpi_bus_generate_proc_event(dev->acpi_dev, 1, device_event);
sonypi_compat_report_event(device_event);
return IRQ_HANDLED;
}

Просмотреть файл

@ -2022,8 +2022,6 @@ static u32 hotkey_driver_mask; /* events needed by the driver */
static u32 hotkey_user_mask; /* events visible to userspace */
static u32 hotkey_acpi_mask; /* events enabled in firmware */
static unsigned int hotkey_report_mode;
static u16 *hotkey_keycode_map;
static struct attribute_set *hotkey_dev_attributes;
@ -2282,10 +2280,6 @@ static struct tp_acpi_drv_struct ibm_hotkey_acpidriver;
static void tpacpi_hotkey_send_key(unsigned int scancode)
{
tpacpi_input_send_key_masked(scancode);
if (hotkey_report_mode < 2) {
acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device,
0x80, TP_HKEY_EV_HOTKEY_BASE + scancode);
}
}
static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m)
@ -2882,18 +2876,6 @@ static void hotkey_tablet_mode_notify_change(void)
"hotkey_tablet_mode");
}
/* sysfs hotkey report_mode -------------------------------------------- */
static ssize_t hotkey_report_mode_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n",
(hotkey_report_mode != 0) ? hotkey_report_mode : 1);
}
static struct device_attribute dev_attr_hotkey_report_mode =
__ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL);
/* sysfs wakeup reason (pollable) -------------------------------------- */
static ssize_t hotkey_wakeup_reason_show(struct device *dev,
struct device_attribute *attr,
@ -2935,7 +2917,6 @@ static struct attribute *hotkey_attributes[] __initdata = {
&dev_attr_hotkey_enable.attr,
&dev_attr_hotkey_bios_enabled.attr,
&dev_attr_hotkey_bios_mask.attr,
&dev_attr_hotkey_report_mode.attr,
&dev_attr_hotkey_wakeup_reason.attr,
&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
&dev_attr_hotkey_mask.attr,
@ -3439,11 +3420,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
"initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"legacy ibm/hotkey event reporting over procfs %s\n",
(hotkey_report_mode < 2) ?
"enabled" : "disabled");
tpacpi_inputdev->open = &hotkey_inputdev_open;
tpacpi_inputdev->close = &hotkey_inputdev_close;
@ -3737,13 +3713,6 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
"event happened to %s\n", TPACPI_MAIL);
}
/* Legacy events */
if (!ignore_acpi_ev &&
(send_acpi_ev || hotkey_report_mode < 2)) {
acpi_bus_generate_proc_event(ibm->acpi->device,
event, hkey);
}
/* netlink events */
if (!ignore_acpi_ev && send_acpi_ev) {
acpi_bus_generate_netlink_event(
@ -8840,11 +8809,6 @@ module_param(brightness_enable, uint, 0444);
MODULE_PARM_DESC(brightness_enable,
"Enables backlight control when 1, disables when 0");
module_param(hotkey_report_mode, uint, 0444);
MODULE_PARM_DESC(hotkey_report_mode,
"used for backwards compatibility with userspace, "
"see documentation");
#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
module_param_named(volume_mode, volume_mode, uint, 0444);
MODULE_PARM_DESC(volume_mode,
@ -8975,10 +8939,6 @@ static int __init thinkpad_acpi_module_init(void)
tpacpi_lifecycle = TPACPI_LIFE_INIT;
/* Parameter checking */
if (hotkey_report_mode > 2)
return -EINVAL;
/* Driver-level probe */
ret = get_thinkpad_model_data(&thinkpad_id);

Просмотреть файл

@ -367,7 +367,6 @@ extern int unregister_acpi_notifier(struct notifier_block *);
*/
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
void acpi_bus_data_handler(acpi_handle handle, void *context);
acpi_status acpi_bus_get_status_handle(acpi_handle handle,
unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
@ -387,15 +386,6 @@ bool acpi_bus_can_wakeup(acpi_handle handle);
static inline bool acpi_bus_can_wakeup(acpi_handle handle) { return false; }
#endif
#ifdef CONFIG_ACPI_PROC_EVENT
int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data);
int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data);
int acpi_bus_receive_event(struct acpi_bus_event *event);
#else
static inline int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data)
{ return 0; }
#endif
void acpi_scan_lock_acquire(void);
void acpi_scan_lock_release(void);
int acpi_scan_add_handler(struct acpi_scan_handler *handler);

Просмотреть файл

@ -49,22 +49,23 @@ enum cpio_fields {
/**
* cpio_data find_cpio_data - Search for files in an uncompressed cpio
* @path: The directory to search for, including a slash at the end
* @data: Pointer to the the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @offset: When a matching file is found, this is the offset to the
* beginning of the cpio. It can be used to iterate through
* the cpio to find all files inside of a directory path
* @path: The directory to search for, including a slash at the end
* @data: Pointer to the the cpio archive or a header inside
* @len: Remaining length of the cpio based on data pointer
* @nextoff: When a matching file is found, this is the offset from the
* beginning of the cpio to the beginning of the next file, not the
* matching file itself. It can be used to iterate through the cpio
* to find all files inside of a directory path.
*
* @return: struct cpio_data containing the address, length and
* filename (with the directory path cut off) of the found file.
* If you search for a filename and not for files in a directory,
* pass the absolute path of the filename in the cpio and make sure
* the match returned an empty filename string.
* @return: struct cpio_data containing the address, length and
* filename (with the directory path cut off) of the found file.
* If you search for a filename and not for files in a directory,
* pass the absolute path of the filename in the cpio and make sure
* the match returned an empty filename string.
*/
struct cpio_data find_cpio_data(const char *path, void *data,
size_t len, long *offset)
size_t len, long *nextoff)
{
const size_t cpio_header_len = 8*C_NFIELDS - 2;
struct cpio_data cd = { NULL, 0, "" };
@ -124,7 +125,7 @@ struct cpio_data find_cpio_data(const char *path, void *data,
if ((ch[C_MODE] & 0170000) == 0100000 &&
ch[C_NAMESIZE] >= mypathsize &&
!memcmp(p, path, mypathsize)) {
*offset = (long)nptr - (long)data;
*nextoff = (long)nptr - (long)data;
if (ch[C_NAMESIZE] - mypathsize >= MAX_CPIO_FILE_NAME) {
pr_warn(
"File %s exceeding MAX_CPIO_FILE_NAME [%d]\n",