V4L/DVB (10827): Add support for GeoVision GV-800(S)
I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Bruno Christo
Mauro Carvalho Chehab
Родитель
f1735bb2a5
Коммит
0c5db42551
|
|
@ -155,3 +155,5 @@
|
|||
154 -> PHYTEC VD-012-X1 (bt878)
|
||||
155 -> PHYTEC VD-012-X2 (bt878)
|
||||
156 -> IVCE-8784 [0000:f050,0001:f050,0002:f050,0003:f050]
|
||||
157 -> Geovision GV-800(S) (master) [800a:763d]
|
||||
158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d]
|
||||
|
|
|
|||
|
|
@ -75,6 +75,9 @@ static void geovision_muxsel(struct bttv *btv, unsigned int input);
|
|||
|
||||
static void phytec_muxsel(struct bttv *btv, unsigned int input);
|
||||
|
||||
static void gv800s_muxsel(struct bttv *btv, unsigned int input);
|
||||
static void gv800s_init(struct bttv *btv);
|
||||
|
||||
static int terratec_active_radio_upgrade(struct bttv *btv);
|
||||
static int tea5757_read(struct bttv *btv);
|
||||
static int tea5757_write(struct bttv *btv, int value);
|
||||
|
|
@ -311,6 +314,10 @@ static struct CARD {
|
|||
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
|
||||
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
|
||||
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
|
||||
{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
|
||||
{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
||||
{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
||||
{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
||||
{ 0, -1, NULL }
|
||||
};
|
||||
|
||||
|
|
@ -2818,7 +2825,60 @@ struct tvcard bttv_tvcards[] = {
|
|||
.pll = PLL_28,
|
||||
.tuner_type = TUNER_ABSENT,
|
||||
.tuner_addr = ADDR_UNSET,
|
||||
}
|
||||
},
|
||||
[BTTV_BOARD_GEOVISION_GV800S] = {
|
||||
/* Bruno Christo <bchristo@inf.ufsm.br>
|
||||
*
|
||||
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
|
||||
* 1 audio input per BT878A = 4 audio inputs
|
||||
* 4 video inputs per BT878A = 16 video inputs
|
||||
* This is the first BT878A chip of the GV-800(S). It's the
|
||||
* "master" chip and it controls the video inputs through an
|
||||
* analog multiplexer (a CD22M3494) via some GPIO pins. The
|
||||
* slaves should use card type 0x9e (following this one).
|
||||
* There is a EEPROM on the card which is currently not handled.
|
||||
* The audio input is not working yet.
|
||||
*/
|
||||
.name = "Geovision GV-800(S) (master)",
|
||||
.video_inputs = 4,
|
||||
/* .audio_inputs= 1, */
|
||||
.tuner_type = TUNER_ABSENT,
|
||||
.tuner_addr = ADDR_UNSET,
|
||||
.svhs = NO_SVHS,
|
||||
.gpiomask = 0xf107f,
|
||||
.no_gpioirq = 1,
|
||||
.muxsel = MUXSEL(2, 2, 2, 2),
|
||||
.pll = PLL_28,
|
||||
.no_msp34xx = 1,
|
||||
.no_tda7432 = 1,
|
||||
.no_tda9875 = 1,
|
||||
.muxsel_hook = gv800s_muxsel,
|
||||
},
|
||||
[BTTV_BOARD_GEOVISION_GV800S_SL] = {
|
||||
/* Bruno Christo <bchristo@inf.ufsm.br>
|
||||
*
|
||||
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
|
||||
* 1 audio input per BT878A = 4 audio inputs
|
||||
* 4 video inputs per BT878A = 16 video inputs
|
||||
* The 3 other BT878A chips are "slave" chips of the GV-800(S)
|
||||
* and should use this card type.
|
||||
* The audio input is not working yet.
|
||||
*/
|
||||
.name = "Geovision GV-800(S) (slave)",
|
||||
.video_inputs = 4,
|
||||
/* .audio_inputs= 1, */
|
||||
.tuner_type = TUNER_ABSENT,
|
||||
.tuner_addr = ADDR_UNSET,
|
||||
.svhs = NO_SVHS,
|
||||
.gpiomask = 0x00,
|
||||
.no_gpioirq = 1,
|
||||
.muxsel = MUXSEL(2, 2, 2, 2),
|
||||
.pll = PLL_28,
|
||||
.no_msp34xx = 1,
|
||||
.no_tda7432 = 1,
|
||||
.no_tda9875 = 1,
|
||||
.muxsel_hook = gv800s_muxsel,
|
||||
},
|
||||
};
|
||||
|
||||
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
|
||||
|
|
@ -3338,6 +3398,9 @@ void __devinit bttv_init_card2(struct bttv *btv)
|
|||
case BTTV_BOARD_KODICOM_4400R:
|
||||
kodicom4400r_init(btv);
|
||||
break;
|
||||
case BTTV_BOARD_GEOVISION_GV800S:
|
||||
gv800s_init(btv);
|
||||
break;
|
||||
}
|
||||
|
||||
/* pll configuration */
|
||||
|
|
@ -4544,6 +4607,122 @@ static void phytec_muxsel(struct bttv *btv, unsigned int input)
|
|||
gpio_bits(0x3, mux);
|
||||
}
|
||||
|
||||
/*
|
||||
* GeoVision GV-800(S) functions
|
||||
* Bruno Christo <bchristo@inf.ufsm.br>
|
||||
*/
|
||||
|
||||
/* This is a function to control the analog switch, which determines which
|
||||
* camera is routed to which controller. The switch comprises an X-address
|
||||
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
|
||||
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
|
||||
* A data value (gpio bit 18) of '1' enables the switch, and '0' disables
|
||||
* the switch. A STROBE bit (gpio bit 17) latches the data value into the
|
||||
* specified address. There is also a chip select (gpio bit 16).
|
||||
* The idea is to set the address and chip select together, bring
|
||||
* STROBE high, write the data, and finally bring STROBE back to low.
|
||||
*/
|
||||
static void gv800s_write(struct bttv *btv,
|
||||
unsigned char xaddr,
|
||||
unsigned char yaddr,
|
||||
unsigned char data) {
|
||||
/* On the "master" 878A:
|
||||
* GPIO bits 0-9 are used for the analog switch:
|
||||
* 00 - 03: camera selector
|
||||
* 04 - 06: 878A (controller) selector
|
||||
* 16: cselect
|
||||
* 17: strobe
|
||||
* 18: data (1->on, 0->off)
|
||||
* 19: reset
|
||||
*/
|
||||
const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
|
||||
const u32 CSELECT = 1<<16;
|
||||
const u32 STROBE = 1<<17;
|
||||
const u32 DATA = data<<18;
|
||||
|
||||
gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
|
||||
gpio_bits(0x20000, STROBE); /* STROBE high */
|
||||
gpio_bits(0x40000, DATA); /* write DATA */
|
||||
gpio_bits(0x20000, ~STROBE); /* STROBE low */
|
||||
}
|
||||
|
||||
/*
|
||||
* GeoVision GV-800(S) muxsel
|
||||
*
|
||||
* Each of the 4 cards (controllers) use this function.
|
||||
* The controller using this function selects the input through the GPIO pins
|
||||
* of the "master" card. A pointer to this card is stored in master[btv->c.nr].
|
||||
*
|
||||
* The parameter 'input' is the requested camera number (0-4) on the controller.
|
||||
* The map array has the address of each input. Note that the addresses in the
|
||||
* array are in the sequence the original GeoVision driver uses, that is, set
|
||||
* every controller to input 0, then to input 1, 2, 3, repeat. This means that
|
||||
* the physical "camera 1" connector corresponds to controller 0 input 0,
|
||||
* "camera 2" corresponds to controller 1 input 0, and so on.
|
||||
*
|
||||
* After getting the input address, the function then writes the appropriate
|
||||
* data to the analog switch, and housekeeps the local copy of the switch
|
||||
* information.
|
||||
*/
|
||||
static void gv800s_muxsel(struct bttv *btv, unsigned int input)
|
||||
{
|
||||
struct bttv *mctlr;
|
||||
char *sw_status;
|
||||
int xaddr, yaddr;
|
||||
static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
|
||||
{ 0x1, 0x5, 0xb, 0x7 },
|
||||
{ 0x2, 0x8, 0xc, 0xe },
|
||||
{ 0x3, 0x9, 0xd, 0xf } };
|
||||
input = input%4;
|
||||
mctlr = master[btv->c.nr];
|
||||
if (mctlr == NULL) {
|
||||
/* do nothing until the "master" is detected */
|
||||
return;
|
||||
}
|
||||
yaddr = (btv->c.nr - mctlr->c.nr) & 3;
|
||||
sw_status = (char *)(&mctlr->mbox_we);
|
||||
xaddr = map[yaddr][input] & 0xf;
|
||||
|
||||
/* Check if the controller/camera pair has changed, ignore otherwise */
|
||||
if (sw_status[yaddr] != xaddr) {
|
||||
/* disable the old switch, enable the new one and save status */
|
||||
gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
|
||||
sw_status[yaddr] = xaddr;
|
||||
gv800s_write(mctlr, xaddr, yaddr, 1);
|
||||
}
|
||||
}
|
||||
|
||||
/* GeoVision GV-800(S) "master" chip init */
|
||||
static void gv800s_init(struct bttv *btv)
|
||||
{
|
||||
char *sw_status = (char *)(&btv->mbox_we);
|
||||
int ix;
|
||||
|
||||
gpio_inout(0xf107f, 0xf107f);
|
||||
gpio_write(1<<19); /* reset the analog MUX */
|
||||
gpio_write(0);
|
||||
|
||||
/* Preset camera 0 to the 4 controllers */
|
||||
for (ix = 0; ix < 4; ix++) {
|
||||
sw_status[ix] = ix;
|
||||
gv800s_write(btv, ix, ix, 1);
|
||||
}
|
||||
|
||||
/* Inputs on the "master" controller need this brightness fix */
|
||||
bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
|
||||
|
||||
if (btv->c.nr > BTTV_MAX-4)
|
||||
return;
|
||||
/*
|
||||
* Store the "master" controller pointer in the master
|
||||
* array for later use in the muxsel function.
|
||||
*/
|
||||
master[btv->c.nr] = btv;
|
||||
master[btv->c.nr+1] = btv;
|
||||
master[btv->c.nr+2] = btv;
|
||||
master[btv->c.nr+3] = btv;
|
||||
}
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
/* motherboard chipset specific stuff */
|
||||
|
||||
|
|
|
|||
|
|
@ -181,6 +181,8 @@
|
|||
#define BTTV_BOARD_VD012_X1 0x9a
|
||||
#define BTTV_BOARD_VD012_X2 0x9b
|
||||
#define BTTV_BOARD_IVCE8784 0x9c
|
||||
#define BTTV_BOARD_GEOVISION_GV800S 0x9d
|
||||
#define BTTV_BOARD_GEOVISION_GV800S_SL 0x9e
|
||||
|
||||
|
||||
/* more card-specific defines */
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче