serial: delete useless void casts in 8250.c

These might have worked some magic with an ancient gcc back in
1992, but "objdump --disassemble" on gcc 4.6 on x86-64 shows
identical output before and after this commit.  Send the casts
and their hysterical rasins to the bitbucket.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Paul Gortmaker 2012-03-08 19:12:10 -05:00 коммит произвёл Greg Kroah-Hartman
Родитель 3f0ab32753
Коммит 0d263a264c
1 изменённых файлов: 11 добавлений и 11 удалений

Просмотреть файл

@ -1218,7 +1218,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
ICP = (up->port.iobase & 0xfe0) | 0x1f;
save_ICP = inb_p(ICP);
outb_p(0x80, ICP);
(void) inb_p(ICP);
inb_p(ICP);
}
/* forget possible initially masked and pending IRQ */
@ -1238,10 +1238,10 @@ static void autoconfig_irq(struct uart_8250_port *up)
UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
}
serial_out(up, UART_IER, 0x0f); /* enable all intrs */
(void)serial_in(up, UART_LSR);
(void)serial_in(up, UART_RX);
(void)serial_in(up, UART_IIR);
(void)serial_in(up, UART_MSR);
serial_in(up, UART_LSR);
serial_in(up, UART_RX);
serial_in(up, UART_IIR);
serial_in(up, UART_MSR);
serial_out(up, UART_TX, 0xFF);
udelay(20);
irq = probe_irq_off(irqs);
@ -1973,10 +1973,10 @@ static int serial8250_startup(struct uart_port *port)
/*
* Clear the interrupt registers.
*/
(void) serial_in(up, UART_LSR);
(void) serial_in(up, UART_RX);
(void) serial_in(up, UART_IIR);
(void) serial_in(up, UART_MSR);
serial_in(up, UART_LSR);
serial_in(up, UART_RX);
serial_in(up, UART_IIR);
serial_in(up, UART_MSR);
/*
* At this point, there's no way the LSR could still be 0xff;
@ -2152,7 +2152,7 @@ dont_test_tx_en:
*/
icp = (up->port.iobase & 0xfe0) | 0x01f;
outb_p(0x80, icp);
(void) inb_p(icp);
inb_p(icp);
}
return 0;
@ -2198,7 +2198,7 @@ static void serial8250_shutdown(struct uart_port *port)
* Read data port to reset things, and then unlink from
* the IRQ chain.
*/
(void) serial_in(up, UART_RX);
serial_in(up, UART_RX);
del_timer_sync(&up->timer);
up->timer.function = serial8250_timeout;