bnx2x: Updating regdump_len at drvinfo

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Eilon Greenstein 2009-08-12 08:23:40 +00:00 коммит произвёл David S. Miller
Родитель 938cf5416d
Коммит 0d28e49a26
1 изменённых файлов: 33 добавлений и 36 удалений

Просмотреть файл

@ -8947,50 +8947,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return 0;
}
#define PHY_FW_VER_LEN 10
static void bnx2x_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct bnx2x *bp = netdev_priv(dev);
u8 phy_fw_ver[PHY_FW_VER_LEN];
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
phy_fw_ver[0] = '\0';
if (bp->port.pmf) {
bnx2x_acquire_phy_lock(bp);
bnx2x_get_ext_phy_fw_version(&bp->link_params,
(bp->state != BNX2X_STATE_CLOSED),
phy_fw_ver, PHY_FW_VER_LEN);
bnx2x_release_phy_lock(bp);
}
snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
(bp->common.bc_ver & 0xff0000) >> 16,
(bp->common.bc_ver & 0xff00) >> 8,
(bp->common.bc_ver & 0xff),
((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
strcpy(info->bus_info, pci_name(bp->pdev));
info->n_stats = BNX2X_NUM_STATS;
info->testinfo_len = BNX2X_NUM_TESTS;
info->eedump_len = bp->common.flash_size;
info->regdump_len = 0;
}
#define IS_E1_ONLINE(info) (((info) & RI_E1_ONLINE) == RI_E1_ONLINE)
#define IS_E1H_ONLINE(info) (((info) & RI_E1H_ONLINE) == RI_E1H_ONLINE)
static int bnx2x_get_regs_len(struct net_device *dev)
{
static u32 regdump_len;
struct bnx2x *bp = netdev_priv(dev);
int regdump_len = 0;
int i;
if (regdump_len)
return regdump_len;
if (CHIP_IS_E1(bp)) {
for (i = 0; i < REGS_COUNT; i++)
if (IS_E1_ONLINE(reg_addrs[i].info))
@ -9057,6 +9022,38 @@ static void bnx2x_get_regs(struct net_device *dev,
}
}
#define PHY_FW_VER_LEN 10
static void bnx2x_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
struct bnx2x *bp = netdev_priv(dev);
u8 phy_fw_ver[PHY_FW_VER_LEN];
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
phy_fw_ver[0] = '\0';
if (bp->port.pmf) {
bnx2x_acquire_phy_lock(bp);
bnx2x_get_ext_phy_fw_version(&bp->link_params,
(bp->state != BNX2X_STATE_CLOSED),
phy_fw_ver, PHY_FW_VER_LEN);
bnx2x_release_phy_lock(bp);
}
snprintf(info->fw_version, 32, "BC:%d.%d.%d%s%s",
(bp->common.bc_ver & 0xff0000) >> 16,
(bp->common.bc_ver & 0xff00) >> 8,
(bp->common.bc_ver & 0xff),
((phy_fw_ver[0] != '\0') ? " PHY:" : ""), phy_fw_ver);
strcpy(info->bus_info, pci_name(bp->pdev));
info->n_stats = BNX2X_NUM_STATS;
info->testinfo_len = BNX2X_NUM_TESTS;
info->eedump_len = bp->common.flash_size;
info->regdump_len = bnx2x_get_regs_len(dev);
}
static void bnx2x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct bnx2x *bp = netdev_priv(dev);