ASoC: Intel: bytcht_es8316: Add external speaker mux support

The ES8316 only has a single (amplified) output. The ES8316 appnote showing
the intended usage uses a jack-receptacle which physically disconnects the
speakers from the output when a jack is plugged in.

But all 3 devices using the es8316 which I have (2 Cherry Trail devices and
one Bay Trail CR device), use an analog mux to disconnect the speakers,
driven by a GPIO.

This commit adds support for this, modelling this as a separate speaker
widget / dapm pin-switch which sets the mux to drive the speakers when
selected.

The intend is for userspace to use the recently added jack-detect support
and then automatically select either the Headphone or Speaker output based
on that.

Note this commit includes a workaround for an ACPI table bug which is
present on 2 of the 3 devices I have, see the added comment in the code.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Hans de Goede 2019-01-03 14:45:32 +01:00 коммит произвёл Mark Brown
Родитель 4bf538b429
Коммит 0d3e91da07
Не найден ключ, соответствующий данной подписи
Идентификатор ключа GPG: 24D68B725D5487D0
1 изменённых файлов: 98 добавлений и 0 удалений

Просмотреть файл

@ -19,8 +19,11 @@
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/module.h>
@ -40,6 +43,8 @@
struct byt_cht_es8316_private {
struct clk *mclk;
struct snd_soc_jack jack;
struct gpio_desc *speaker_en_gpio;
bool speaker_en;
};
#define BYT_CHT_ES8316_SSP0 BIT(16)
@ -56,7 +61,24 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk SSP0 enabled");
}
static int byt_cht_es8316_speaker_power_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_card *card = w->dapm->card;
struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card);
if (SND_SOC_DAPM_EVENT_ON(event))
priv->speaker_en = true;
else
priv->speaker_en = false;
gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
return 0;
}
static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
SND_SOC_DAPM_SPK("Speaker", NULL),
SND_SOC_DAPM_HP("Headphone", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
@ -67,6 +89,10 @@ static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = {
*/
SND_SOC_DAPM_MIC("Microphone 1", NULL),
SND_SOC_DAPM_MIC("Microphone 2", NULL),
SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0,
byt_cht_es8316_speaker_power_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
};
static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
@ -76,6 +102,14 @@ static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = {
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
/*
* There is no separate speaker output instead the speakers are muxed to
* the HP outputs. The mux is controlled by the "Speaker Power" supply.
*/
{"Speaker", NULL, "HPOL"},
{"Speaker", NULL, "HPOR"},
{"Speaker", NULL, "Speaker Power"},
};
static const struct snd_soc_dapm_route byt_cht_es8316_ssp0_map[] = {
@ -95,6 +129,7 @@ static const struct snd_soc_dapm_route byt_cht_es8316_ssp2_map[] = {
};
static const struct snd_kcontrol_new byt_cht_es8316_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
SOC_DAPM_PIN_SWITCH("Microphone 1"),
@ -323,6 +358,25 @@ static int byt_cht_es8316_resume(struct snd_soc_card *card)
}
}
/*
* Some Cherry Trail boards with an ES8316 codec have a bug in their
* ACPI tables where the MSSL1680 touchscreen's _PS0 and _PS3 methods
* wrongly also set the speaker-enable GPIO to 1/0. Testing has shown
* that this really is a bug and the GPIO has no influence on the
* touchscreen at all.
*
* The silead.c touchscreen driver does not support runtime suspend, so
* the GPIO can only be changed underneath us during a system suspend.
* This resume() function runs from a pm complete() callback, and thus
* is guaranteed to run after the touchscreen driver/ACPI-subsys has
* brought the touchscreen back up again (and thus changed the GPIO).
*
* So to work around this we pass GPIOD_FLAGS_BIT_NONEXCLUSIVE when
* requesting the GPIO and we set its value here to undo any changes
* done by the touchscreen's broken _PS0 ACPI method.
*/
gpiod_set_value_cansleep(priv->speaker_en_gpio, priv->speaker_en);
return 0;
}
@ -347,12 +401,20 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = {
{}
};
static const struct acpi_gpio_params first_gpio = { 0, 0, false };
static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = {
{ "speaker-enable-gpios", &first_gpio, 1 },
{ },
};
static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
{
struct byt_cht_es8316_private *priv;
struct device *dev = &pdev->dev;
struct snd_soc_acpi_mach *mach;
const char *i2c_name = NULL;
struct device *codec_dev;
int dai_index = 0;
int i;
int ret = 0;
@ -405,12 +467,39 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
return ret;
}
/* get speaker enable GPIO */
codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, codec_name);
if (!codec_dev)
return -EPROBE_DEFER;
devm_acpi_dev_add_driver_gpios(codec_dev, byt_cht_es8316_gpios);
priv->speaker_en_gpio =
gpiod_get_index(codec_dev, "speaker-enable", 0,
/* see comment in byt_cht_es8316_resume */
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
put_device(codec_dev);
if (IS_ERR(priv->speaker_en_gpio)) {
ret = PTR_ERR(priv->speaker_en_gpio);
switch (ret) {
case -ENOENT:
priv->speaker_en_gpio = NULL;
break;
default:
dev_err(dev, "get speaker GPIO failed: %d\n", ret);
/* fall through */
case -EPROBE_DEFER:
return ret;
}
}
/* register the soc card */
byt_cht_es8316_card.dev = dev;
snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv);
ret = devm_snd_soc_register_card(dev, &byt_cht_es8316_card);
if (ret) {
gpiod_put(priv->speaker_en_gpio);
dev_err(dev, "snd_soc_register_card failed: %d\n", ret);
return ret;
}
@ -418,11 +507,20 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
return 0;
}
static int snd_byt_cht_es8316_mc_remove(struct platform_device *pdev)
{
struct byt_cht_es8316_private *priv = platform_get_drvdata(pdev);
gpiod_put(priv->speaker_en_gpio);
return 0;
}
static struct platform_driver snd_byt_cht_es8316_mc_driver = {
.driver = {
.name = "bytcht_es8316",
},
.probe = snd_byt_cht_es8316_mc_probe,
.remove = snd_byt_cht_es8316_mc_remove,
};
module_platform_driver(snd_byt_cht_es8316_mc_driver);